Linksys N300 Manuel utilisateur

User Guide

MAX-STREAM™

AC2200 MU-MIMO

TRI-BAND ROUTER

Model EA8300

2

Contents

Product Overview .........................................................................................................3

Top view ............................................................................................................................................................. 3

System status indicator........................................................................................................................................ 4

Back view ........................................................................................................................................................... 5

Side view ............................................................................................................................................................ 6

Setting Up: Basics ........................................................................................................7

Where to find more help ............................................................................................................................... 7

How to install your router ............................................................................................................................ 8

How to Use Linksys Smart Wi-Fi .......................................................................... 11

How to connect to Linksys Smart Wi-Fi............................................................................................... 11

Network Map ................................................................................................................................................. 12

Guest Access ................................................................................................................................................ 12

Parental Controls......................................................................................................................................... 13

Media Prioritization ..................................................................................................................................... 13

Speed Test ..................................................................................................................................................... 14

External Storage.......................................................................................................................................... 14

Connectivity .................................................................................................................................................. 15

Troubleshooting ........................................................................................................................................... 15

Wireless ........................................................................................................................................................... 16

Security ........................................................................................................................................................... 16

Troubleshooting ......................................................................................................... 17

Your router was not successfully set up ............................................................................................. 17

Your Internet cable is not plugged in

message ................................................................................. 18

Cannot access your router

message .................................................................................................... 19

After setup ..................................................................................................................................................... 21

The internet appears to be unavailable ............................................................................................... 21

Linksys Smart Wi-Fi does not open in your web browser .............................................................. 22

Specifications ............................................................................................................. 23

Linksys EA8300 .......................................................................................................................................... 23

Environmental ................................

............................................................................................................... 23

3

Product Overview

Top view

4

System status indicator

Ethernet cable connection to Internet port—When lit (orange), indicates a problem with the network

cable connected to the Internet (WAN) port.

Internet connection—When lit (orange), indicates the router cannot access the internet.

WPS (Wi-Fi Protected Setup™) indicator------The WPS light has four states:

Off No Wi-Fi Protected Setup

activity

Blinking White

Wi-Fi Protected Setup in

progress

Solid White

Wi-Fi Protected Setup is

successful; remains lit for five

seconds

Blinking Orange

Wi-Fi Protected Setup error;

blinks for one minute, then

goes off

Illuminated Linksys Logo—Logo blinks while the router is starting up. When the logo is solid white,

the router is powered on and working correctly.

5

Back view

USB 3.0 port (1)— Connect and share USB drives on your network or on the internet.

USB activity indicator (2)— Lights indicate data transfer to/from external devices.

Ethernet ports (3)—Connect ethernet cables to these blue gigabit (10/100/1000) ports, and to

wired devices on your network.

Note—For best performance, use CAT5e or higher rated cables on the Ethernet ports.

Internet port (4)— Connect an ethernet cable to this yellow gigabit (10/100/1000) port, and to a

broadband internet cable/DSL or fiber modem.

Note—For best performance, use CAT5e or higher rated cable on the Internet port.

Reset button (5)— Press and hold until the illuminated Linksys logo turns off to reset the router to

factory settings. You can also restore the factory settings using Linksys Smart Wi-Fi on the internet

or mobile app.

Power port (6)—Connect the included AC power adapter.

Power switch (7)—Press | (on) to turn on the router.

6

Side view

Wi-Fi Protected Setup™ button—Press to connect to WPS-enabled network devices.

7

Setting Up: Basics

Where to find more help

In addition to this user guide, you can find help at these locations:

•

Linksys.com/support/EA8300 (documentation, downloads, FAQs, technical support, live chat,

forums)

•

Linksys Smart Wi-Fi help (connect to Linksys Smart Wi-Fi, then click Help at the top of the

screen)

Note—Licenses and notices for third party software used in this product may be viewed on

http://support.linksys.com/en-us/license. Please contact http://support.linksys.com/en-

us/gplcodecenter for questions or GPL source code requests.

8

How to install your router

1.

To complete setup, you will need a computer to visit http://LinksysSmartWiFi.com in a web

browser.

2.

Identify your equipment.

If you have a separate modem and standalone

router, disconnect and remove your old router.

If you have a modem router, leave it

connected.

3. Position the antennas straight up and plug in the router to a power source. Make sure the

power switch is in the | (on) position.

4. Connect your router to your modem or modem router. Plug one end of the included internet

cable to the yellow Internet port on your new router. If you have a modem, plug the other end

into the Ethernet (LAN) port on the modem. If you have a modem router, plug into any available

port.

5. Wait until the illuminated Linksys light on the top of your router stops blinking and is solid

white.

6. Connect to the Wi-Fi name shown in the Quick Start Guide that came with your router. (You

can change these details later.) If you need help connecting to the network refer to your

device documentation at linksys.com/support/EA8300.

Note—You will not have internet access until router setup is complete.

7. Enter http://LinksysSmartWiFi.com in a web browser. Follow the on-screen instructions to

complete your router setup. You also can type 192.168.1.1 in a browser to start setup.

9

At the end of setup, follow the on-screen instructions to set up your Linksys Smart Wi-Fi account. Use

Linksys Smart Wi-Fi to configure your router from any computer with an internet connection.

Manage your router’s settings:

•

Change your router’s name and password

•

Set up guest access

•

Configure parental controls

•

Connect devices to your Wi-Fi

•

Test your internet connection speed

Note—As part of Linksys Smart Wi-Fi account setup, you will be sent a verification e-mail. From your

home network, click the link in the email to associate your router with the Linksys Smart Wi-Fi

account.

Tip—Print the next page, then record your router and account settings in the table as a reference.

Store your notes in a safe place.

10

2.4 GHz Wi-Fi Name

Wi-Fi Password

5 GHz

1

Wi-Fi Name

Wi-Fi Password

5 GHz

2

Wi-Fi Name

Wi-Fi Password

Router Password

2.4 GHz Guest Wi-Fi

Name

5GHz Guest Wi-Fi

Name

Guest Wi-Fi

Password (Both

share a password.)

Linksys Smart Wi-Fi

Username

Linksys Smart Wi-Fi

Password

11

How to Use Linksys Smart Wi-Fi

You can manage your router from anywhere in the world by using Linksys Smart Wi-Fi, but you can

also do it directly from your home network. Linksys Smart Wi-Fi may be available for your mobile

device, as well. See your device’s app store for information.

How to connect to Linksys Smart Wi-Fi

To connect to Linksys Smart Wi-Fi:

1.

Open your computer’s web browser.

2.

Go to http://LinksysSmartWiFi.com

and log in to your account.

If you can’t remember your password, click

Forgot your password?

and follow the on-screen

instructions to recover it.

12

Network Map

Lets you display and manage all network devices connected to your router. You can view devices on

your main network and your guest network, or display information about each device.

Guest Access

Lets you set up and monitor a network for guests to access Wi-Fi without exposing personal

information.

13

Parental Controls

Lets you block web sites and set internet access times.

Media Prioritization

Lets you set which devices and applications have top priority for your network traffic.

14

Speed Test

Lets you test your network’s internet connection speed.

External Storage

Lets you access an attached USB drive (not included) and set up file sharing, a media server, and FTP

access.

15

Connectivity

Lets you view and change basic and advanced network settings.

Troubleshooting

Lets you diagnose problems with your router and check the status of the network.

16

Wireless

Lets you view and change your router’s wireless network. You can change network names, security

mode, password, MAC filtering, and connect devices using Wi-Fi Protected Setup.

Security

Lets you view and change your router’s wireless security. You can set up the firewall, VPN settings,

and make custom settings for applications and games.

17

Troubleshooting

You can find more help from our award-winning customer support at linksys.com/support/EA8300.

Your router was not successfully set up

If Linksys Smart Wi-Fi did not complete the setup, you can try the following:

•

Press and hold the Reset button on your router with a paperclip or pin until the illuminated

Linksys logo turns off and the blue MU-MIMO indicators start blinking (about 10 seconds).

Install the router again.

•

Temporarily disable your computer’s firewall (see the security software’s instructions for

help). Install the router again.

•

If you have another computer, use that computer to install the router again.

18

Your Internet cable is not plugged in

message

If you get a “Your Internet cable is not plugged in” message when trying to set up your router, follow

these troubleshooting steps.

•

Make sure that an ethernet or internet cable (or a cable like the one supplied with your router)

is securely connected to the yellow Internet port on the back of the router and to the

appropriate port on your modem. This port on the modem is usually labeled Ethernet.

•

Make sure that your modem is connected to power and is turned on. If it has a power switch,

make sure that it is set to the ON or | (as opposed to O) position.

19

If your internet service is cable, verify that the

cable modem’s CABLE port is connected to the

coaxial cable provided by your ISP.

If your internet service is DSL, make sure that the

DSL phone line is connected to the modem’s DSL

port.

•

If your computer was previously connected to your modem with a USB cable, disconnect the

USB cable.

•

Install the router again.

Cannot access your router

message

To access your router, you must be connected to your own network. If you have wireless internet

access, the problem may be that you have accidentally connected to a different wireless network.

To fix the problem on Windows computers, do the following*:

1.

Click on the wireless icon in the system tray. A list of available networks will appear.

20

2.

Click your own network name. Click Connect. In the example below, the computer was

connected to another wireless network named wraith_5GHz. The wireless network name of the

Linksys EA8300 router, Damaged_Beez2.4 in this example, is shown selected.

3.

If you are prompted to enter a network security key, type your password (security key) into the

network security key field. Click OK.

4.

Your computer will connect to the network, and you should be able to access the router.

*Depending on your version of Windows, there could be some differences in wording or icons in these

steps.

To fix the problem on Mac computers, do the following:

1.

In the menu bar across the top of the screen, click the Wi-Fi icon. A list of wireless networks will

appear.

2.

In the example below, the computer was connected to another wireless network named

wraith_5GHz. The wireless network name of the Linksys EA8300 router, Damaged_Beez2.4 in

this example, is shown selected.

La page charge ...

Linksys N300 Manuel utilisateur

Ce manuel convient également à

Linksys N300 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents