VTech CS6609 Manuel utilisateur

Marque: VTech

Modèle: CS6609

Catégorie: Téléphones

Taper: Manuel utilisateur

CS6509/CS6509-14/

CS6509-15/CS6509-16/

CS6509-17/CS6509-19

DECT 6.0 accessory handset

for use with VTech models

CS6519/CS6529

User’s manual

Congratulations

on purchasing your new VTech product. Before using this telephone, please read

Important safety instructions on page 5 of this manual.

This manual has instructions on how to set up and register your new handset.

For complete instructions on using the handset, see the Abridged user’s manual

that came with your telephone base.

Please refer to the User’s manual for a full set of installation and operation

instructions at www.vtechphones.com.

The ENERGY STAR

program (www.energystar.gov) recognizes

and encourages the use of products that save energy and help

protect our environment. We are proud to mark this product with

the ENERGY STAR

label indicating it meets the latest energy

efﬁciency guidelines.

Telephones identiﬁed with this logo have reduced noise and

interference when used with most T-coil equipped hearing

aids and cochlear implants. The TIA-1083 Compliant Logo is

a trademark of the Telecommunications Industry Association.

Used under license.

Visit www.vtechphones.com.

Registration

Product news

Learn about the latest VTech products.

Compatible with

Hearing Aid T-Coil

TIA-1083

Battery installation

Install the battery as shown below.

Plug the battery connector

securely into the socket.

Place the battery with the label

THIS SIDE UP facing up and

the wires inside the battery

compartment.

Slide the battery compartment cover

towards the center of the handset

until it clicks into place.

3. Place the handset in the telephone

base or charger to charge.

CHARGE

light remains

on when

charging.

If the handset will not be used for a long time, disconnect and remove the battery

to prevent possible leakage.

To purchase a replacement battery, visit our website at www.vtechphones.com or

call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial

1 (800) 267-7377.

•

Parts checklist

Your telephone package contains the following items. Save your sales receipt and

original packaging in the event warranty service is necessary.

Battery

Battery compartment

cover

Charger and

charger adapter

Handset

User’s manual

Add and register a handset

You can add new handsets (CS6509/CS6509-14/CS6509-15/CS6509-16/

CS6509-17/CS6509-19, purchased separately) to your telephone system. Each

handset must be registered with the telephone base before use. When ﬁrst

purchased, each expansion handset displays To register HS and See manual

alternately. You may need to charge the handset before registering it to the

telephone base.

To register a handset:

Place the new (non-registered) handset in the telephone base.

2. After about 10 seconds, the handset displays Registering... When the

registration process completes, the handset displays Registered and you

hear a beep. The registration process takes about 90 seconds to complete.

Deregister handsets

If you want to replace a handset or reassign the designated handset number of

a registered handset, you must deregister all the handsets and then individually

To deregister all handsets:

Press and hold FIND HANDSET on the telephone base for about 10 seconds

until the IN USE light on the telephone base turns on and starts to ﬂash.

Immediately press FIND HANDSET again. You must press FIND HANDSET

while the IN USE light is still ﬂashing. The IN USE light ﬂashes for approximately

ﬁve seconds.

All handsets display To register HS and See manual alternately when the

deregistration process completes. The deregistration process takes about

10 seconds to complete.

CS6519 base CS6529 base

Do not place the handset

in the charger.

Battery charging

Once you have installed the battery, the screen indicates the battery status

(see the table below).

Battery indicators Battery status Action

The screen is blank, or

displays Put in charger

and ﬂashes.

The battery has no or very little

charge. The handset cannot

be used.

Charge without interruption

(at least 30 minutes).

The screen displays

Low battery and ﬂashes.

The battery has enough charge

to be used for a short time.

Charge without interruption

(about 30 minutes).

The screen displays

HANDSET X.

The battery is charged. To keep the battery charged,

place it in the telephone

base or charger when not

in use.

For best performance, keep the handset in the telephone base or charger when

not in use.

The battery is fully charged after 11 hours of continuous charging.

If you place the handset in the telephone base or the charger without plugging

in the battery, the screen displays NO BATTERY.

•

When the battery is fully charged, you can expect the following performance:

Operation Operating time

While in handset use (talking*) Up to 7 hours

While in speakerphone mode (talking*) Up to 3.5 hours

While not in use (standby**) Up to 5 days

*Operating times vary depending on your actual use and the age of the battery.

**Handset is not charging or in use.

Handset overview

CID/ /VOLUME

Review the caller ID log when

the

phone is not in use.

Decrease the listening volume

during a call.

Decrease the listening volume

during message playback (for

CS6529 only).

Scroll down while in a menu,

or in the directory, caller ID log

or redial list.

Move the cursor to the left

when entering numbers or

names.

•

CHARGE light

On when the handset is

charging.

•

/ /VOLUME

Review the directory when the

phone is not in use.

Increase the listening volume

during a call.

Increase the listening volume

during message playback (for

CS6529 only).

Scroll up while in a menu, or

in the directory, caller ID log or

redial list.

Move the cursor to the right

when entering numbers or

names.

•

MUTE/DELETE

Mute the microphone during

a call.

Delete digits or characters

while using the dialling keys.

Silence the ringer temporarily

while the handset is ringing.

Delete the displayed entry

while in the directory, caller ID

log or redial list.

•

MENU/SELECT

Show the menu.

While in a menu, press to

select an item, or save an

entry or setting.

•

OFF/CANCEL

Hang up a call.

Silence the ringer temporarily

while the handset is ringing.

Press and hold to erase the

missed call indicator while the

phone is not in use.

Press to return to the previous

menu, or press and hold to

return to idle mode, without

making changes.

•

QUIET#

Press and hold to set and turn

on the quiet mode, or turn it off.

Press repeatedly to show other

dialing options when reviewing a

caller ID log entry.

•

INT

Start an intercom conversation

or transfer a call (for

multi-handset models only).

•

/FLASH

Make or answer a call.

Answer another incoming call

during a call.

•

REDIAL/PAUSE

Press repeatedly to review the

redial list.

Press and hold to insert a

dialing pause while dialing or

entering a number.

•

Dialing keys

Enter numbers or characters.

Answer an incoming call.

•

TONE

Switch to tone dialing

temporarily during a call.

•

Make or answer a call using the

handset speakerphone.

During a call, press to switch

between the speakerphone and

the handset.

•

Press repeatedly to add or

remove 1 in front of the caller

ID log entry before dialing or

saving it to the directory.

Press and hold to set or dial

your voicemail number.

•

Important safety instructions

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk

of ﬁre, electric shock and injury, including the following:

Read and understand all instructions.

Follow all warnings and instructions marked on the product.

Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a

damp cloth for cleaning.

Do not use this product near water such as near a bath tub, wash bowl, kitchen sink, laundry tub or a

swimming pool, or in a wet basement or shower.

Do not place this product on an unstable table, shelf, stand or other unstable surfaces.

Slots and openings in the back or bottom of the telephone base and handset are provided for ventilation.

To protect them from overheating, these openings must not be blocked by placing the product on a soft

surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat

This product should be operated only from the type of power source indicated on the marking label.

If you are not sure of the type of power supply in your home or ofﬁce, consult your dealer or local

power company.

Do not allow anything to rest on the power cord. Do not install this product where the cord may be

walked on.

Never push objects of any kind into this product through the slots in the telephone base or handset

because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind

on the product.

To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service

facility. Opening or removing parts of the telephone base or handset other than speciﬁed access doors

may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock

when the product is subsequently used.

Do not overload wall outlets and extension cords.

Unplug this product from the wall outlet and refer servicing to an authorized service facility under the

following conditions:

When the power supply cord or plug is damaged or frayed.

If liquid has been spilled onto the product.

If the product has been exposed to rain or water.

If the product does not operate normally by following the operating instructions. Adjust only those

controls that are covered by the operation instructions. Improper adjustment of other controls may

result in damage and often requires extensive work by an authorized technician to restore the

product to normal operation.

If the product has been dropped and the telephone base and/or handset has been damaged.

If the product exhibits a distinct change in performance.

Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of electric

shock from lightning.

Do not use the telephone to report a gas leak in the vicinity of the leak. Under certain circumstances, a

spark may be created when the adapter is plugged into the power outlet, or when the handset is replaced

in its cradle. This is a common event associated with the closing of any electrical circuit. The user should

not plug the phone into a power outlet, and should not put a charged handset into the cradle, if the

phone is located in an environment containing concentrations of ﬂammable or ﬂame-supporting gases,

unless there is adequate ventilation. A spark in such an environment could create a ﬁre or explosion.

Such environments might include: medical use of oxygen without adequate ventilation; industrial gases

(cleaning solvents; gasoline vapors; etc.); a leak of natural gas; etc.

Only put the handset of your telephone next to your ear when it is in normal talk mode.

The power adapter is intended to be correctly oriented in a vertical or ﬂoor mount position. The prongs are

not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.

SAVE THESE INSTRUCTIONS

Battery

CAUTION: Use Only Supplied Battery.

Do not dispose of the battery in a fire. Check with local waste management codes for special disposal

instructions.

Do not open or mutilate the battery. Released electrolyte is corrosive and may cause burns or injury to the

eyes or skin. The electrolyte may be toxic if swallowed.

Exercise care in handling batteries in order not to create a short circuit with conductive materials.

Charge the battery provided with or identified for use with this product only in accordance with the

instructions and limitations specified in this manual.

Precautions for users of implanted cardiac pacemakers

Cardiac pacemakers (applies only to digital cordless telephones):

Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation

of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by

the U.S. Food and Drug Administration, WTR recommends to physicians that:

Pacemaker patients

Should keep wireless telephones at least six inches from the pacemaker.

Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket, when it

is turned ON.

Should use the wireless telephone at the ear opposite the pacemaker.

WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless

telephones.

About cordless telephones

Privacy: The same features that make a cordless telephone convenient create some limitations.

Telephone calls are transmitted between the telephone base and the cordless handset by radio

waves, so there is a possibility that the cordless telephone conversations could be intercepted by radio

receiving equipment within range of the cordless handset. For this reason, you should not think of

cordless telephone conversations as being as private as those on corded telephones.

Electrical power: The telephone base of this cordless telephone must be connected to a working

electrical outlet. The electrical outlet should not be controlled by a wall switch. Calls cannot be made

from the cordless handset if the telephone base is unplugged, switched off or if the electrical power

is interrupted.

Potential TV interference: Some cordless telephones operate at frequencies that may cause

interference to televisions and VCRs. To minimize or prevent such interference, do not place the

telephone base of the cordless telephone near or on top of a TV or VCR. If interference is experienced,

moving the cordless telephone farther away from the TV or VCR often reduces or eliminates

the interference.

Rechargeable batteries: Exercise care in handling batteries in order not to create a short circuit with

conducting material such as rings, bracelets, and keys. The battery or conductor may overheat and

cause harm. Observe proper polarity between the battery and the battery charger.

Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not

burn or puncture the battery. Like other batteries of this type, if burned or punctured, they could release

caustic material which could cause injury.

10.

11.

12.

•

13.

14.

15.

16.

•

Operating range

This cordless telephone operates with the maximum power allowed by the Federal Communications

Commission (FCC). Even so, this handset and telephone base can communicate over only a certain distance

- which can vary with the locations of the telephone base and handset, the weather, and the layout of your

home or ofﬁce.

When the handset is out of range, the handset displays Out of range or no pwr at base.

If there is a call while the handset is out of range, it may not ring, or if it does ring, the call may not connect well

when you press . Move closer to the telephone base, then press to answer the call.

If the handset moves out of range during a telephone conversation, there may be interference. To improve

reception, move closer to the telephone base.

ECO mode

This power conserving technology reduces power consumption for optimal battery performance. The ECO

mode activates automatically whenever the handset is synchronized with the telephone base.

Maintenance

Taking care of your telephone

Your cordless telephone contains sophisticated electronic parts, so it must be treated with care.

Avoid rough treatment

Place the handset down gently. Save the original packing materials to protect your telephone if you ever need

to ship it.

Avoid water

Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with

wet hands. Do not install the telephone base near a sink, bathtub or shower.

Electrical storms

Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety,

take caution when using electrical appliances during storms.

Cleaning your telephone

Your telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a soft

cloth slightly dampened with water or mild soap. Do not use excess water or cleaning solvents of any kind.

The RBRC

seal

The RBRC

seal on the nickel-metal hydride battery indicates that VTech Communications, Inc. is voluntarily

participating in an industry program to collect and recycle these batteries at the end of their useful lives, when

taken out of service within the United States and Canada.

The RBRC

program provides a convenient alternative to placing used nickel-metal hydride batteries into the

trash or municipal waste, which may be illegal in your area.

VTech’s participation in RBRC

makes it easy for you to drop off the spent battery at local retailers participating

in the RBRC

program or at authorized VTech product service centers. Please call 1 (800) 8 BATTERY

for

information on Ni-MH battery recycling and disposal bans/restrictions in your area. VTech’s involvement in this

program is part of its commitment to protecting our environment and conserving natural resources.

RBRC

is a registered trademark of Rechargeable Battery Recycling Corporation.

Remember that electrical appliances can cause serious injury if used when you are wet or standing in

water. If the telephone base should fall into water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE

POWER CORD AND TELEPHONE LINE CORD FROM THE WALL. Then remove the telephone by the

unplugged cords.

FCC, ACTA and IC regulations

FCC Part 15

This equipment has been tested and found to comply with the requirements for a Class B digital device under

Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide

reasonable protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Changes or modiﬁcations to this equipment not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation. Privacy of communications may not be ensured

when using this telephone.

To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can

be safely absorbed by a user or bystander according to the intended usage of the product. This product has

been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the

user. The telephone base shall be installed and used such that parts of the user’s body other than the hands

are maintained at a distance of approximately 20 cm (8 inches) or more.

This Class B digital apparatus complies with Canadian requirement:

CAN ICES-3 (B)/NMB-3(B).

FCC Part 68 and ACTA

This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the

Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment

contains, among other things, a product identiﬁer in the format US:AAAEQ##TXXXX. This identiﬁer must be

provided to your telephone service provider upon request.

The plug and jack used to connect this equipment to premises wiring and the telephone network must comply

with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and

modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is

also compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two

lines. See the installation instructions in the user’s manual.

The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your

telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th

and 7th characters following the US: in the product identiﬁer (e.g., if ## is 03, the REN is 0.3). In most, but

not all areas, the sum of all RENs should be ﬁve (5.0) or less. For more information, please contact your

telephone service provider.

This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment

connected to your telephone line, ensure the connection of this equipment does not disable your alarm

equipment. If you have questions about what will disable alarm equipment, consult your telephone service

provider or a qualiﬁed installer.

If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been

corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized

agents. For repair procedures, follow the instructions outlined under the Limited warranty.

If this equipment is causing harm to the telephone network, the telephone service provider may temporarily

discontinue your telephone service. The telephone service provider is required to notify you before interrupting

service. If advance notice is not practical, you will be notiﬁed as soon as possible. You will be given the

opportunity to correct the problem and the telephone service provider is required to inform you of your right to

ﬁle a complaint with the FCC. Your telephone service provider may make changes in its facilities, equipment,

operation, or procedures that could affect the proper functioning of this product. The telephone service

provider is required to notify you if such changes are planned.

If this product is equipped with a corded or cordless handset, it is hearing aid compatible.

If this product has memory dialing locations, you may choose to store emergency telephone numbers

(e.g., police, ﬁre, medical) in these locations. If you do store or test emergency numbers, please:

Remain on the line and brieﬂy explain the reason for the call before hanging up.

Perform such activities in off-peak hours, such as early morning or late evening.

Industry Canada

Operation is subject to the following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including interference that may cause undesired

operation.

Privacy of communications may not be ensured when using this phone.

The term ‘’IC:‘’ before the certiﬁcation/registration number only signiﬁes that the Industry Canada technical

speciﬁcations were met.

The Ringer Equivalence Number (REN) for this terminal equipment is 0.1. The REN is an indication of

the maximum number of devices allowed to be connected to a telephone interface. The termination on an

interface may consist of any combination of devices subject only to the requirement that the sum of the RENs

of all the devices does not exceed ﬁve.

This product meets the applicable Industry Canada technical speciﬁcations.

•

California Energy Commission battery charging testing

instructions

This telephone is set up to comply with the energy-conserving standards right out of the box. These

instructions are intended for California Energy Commission (CEC) compliance testing only. When the

CEC battery charging testing mode is activated, all telephone functions, except battery charging, will be

disabled.

To activate the CEC battery charging testing mode:

Unplug the telephone base power adapter from the power outlet. Make sure all handsets are plugged

with charged batteries.

While you press and hold FIND HANDSET, plug the telephone base power adapter back to the

power outlet.

After about 20 seconds, when the IN USE light starts ﬂashing, release FIND HANDSET and then

press it again within 2 seconds.

When the phone successfully enters the CEC battery charging testing mode, the IN USE light

turns off and all handsets display To register HS and See manual alternately.

When the phone fails to enter this mode, repeat Step 1 through Step 3 above.

Note: The telephone base will be powered up as normal if you fail to press FIND HANDSET within

2 seconds in Step 3.

To deactivate the CEC battery charging testing mode:

Unplug the telephone base adapter from the power outlet, then plug it back in. Then the telephone base

is powered up as normal.

For C-UL compliance only

Mesures de sécurité importantes

Afin de réduire les risques d’incendie, de blessures corporelles ou d’électrocution, suivez toujours ces

mesures préventives de base lorsque vous utilisez votre téléphone :

Lisez et comprenez bien toutes les instructions.

Observez toutes les instructions et mises en garde inscrites sur l’appareil.

Débranchez ce téléphone de la prise murale avant de le nettoyer. N’utilisez pas de nettoyeurs liquides ni

en aérosol. N’utilisez qu’un chiffon doux et légèrement humecté.

N’utilisez pas ce produit près de l’eau, tel que près d’un bain, d’un lavabo, d’un évier de cuisine, d’un bac

de lavage ou d’une piscine, ou dans un sous-sol humide ou sous la douche.

Ne déposez pas ce téléphone sur un chariot, support ou table chancelants. L’appareil pourrait tomber et

être sérieusement endommagé.

Le boîtier de l’appareil est doté de fentes et d’ouvertures d’aération situées à l’arrière ou en dessous. Afin

d’empêcher la surchauffe, ces ouvertures ne doivent pas être obstruées en plaçant l’appareil sur un lit, divan,

tapis ou autre surface similaires. Ne placez pas cet appareil à proximité d’un élément de chauffage ni d’une

plinthe électrique. De plus, ne l’installez pas dans une unité murale ou un cabinet fermé qui ne possède pas

d’aération adéquate.

Ne faites fonctionner cet appareil qu’avec le type d’alimentation indiqué sur les étiquettes de l’appareil.

Si vous ne connaissez pas le voltage de votre maison, consultez votre marchand ou votre fournisseur

d’électricité.

Ne déposez rien sur le cordon d’alimentation. Installez cet appareil dans un endroit sécuritaire, là où

personne ne pourra trébucher sur la ligne d’alimentation ni le cordon téléphonique modulaire.

N’insérez jamais d’objets à travers les fentes et ouvertures de cet appareil, car ils pourraient toucher à

des points de tension dangereux ou court-circuiter des pièces, ce qui constituerait un risque d’incendie ou

d’électrocution. N’échappez pas de liquides dans l’appareil.

Afin de réduire les risques d’électrocution, ne démontez pas l’appareil, mais apportez-le plutôt à un

centre de service qualifié s’il doit être réparé. En enlevant le couvercle, vous vous exposez à des

tensions dangereuses ou autres dangers similaires. Un remontage inadéquat peut être à l’origine d’une

électrocution lors d’une utilisation ultérieure de l’appareil. Débranchez l’appareil avant de procéder au

nettoyage. Utilisez un chiffon humide et doux.

Ne surchargez pas les prises de courant et les rallonges.

Débranchez cet appareil de la prise de courant et communiquez avec le département de service à la

clientèle de VTech dans les cas suivants:

Lorsque le cordon d’alimentation est endommagé ou écorché.

Si du liquide a été échappé dans l’appareil.

Si l’appareil a été exposé à une source d’humidité telle que la pluie ou l’eau.

Si le produit ne fonctionne pas normalement en respectant les instructions de fonctionnement. Réglez

uniquement les commandes indiquées dans le les instructions de fonctionnement. Les réglages

incorrects des autres commandes pourraient provoquer un dommage qui pourrait exiger un travail

exhaustif de la part d’un technicien autorisé afin de rétablir le fonctionnement normal de l’appareil.

Si le produit a été échappé et que le socle et/ou le combiné a été endommagé.

Si le produit affiche une nette diminution de sa performance.

Évitez d’utiliser un téléphone (autre qu’un sans fil) pendant un orage. Les éclairs peuvent être à l’origine

d’une électrocution.

N’utilisez pas le téléphone pour rapporter une fuite de gaz à proximité de la fuite. En certaines

circonstances, une flammèche pourrait être provoquée lorsque l’adaptateur est branché à une prise de

courant, ou lorsque le combiné est déposé sur le socle. Ceci est un événement commun associé à la

fermeture d’un circuit électrique. L’utilisateur ne devrait pas brancher le téléphone à une prise de courant,

et ne devrait pas déposer le combiné chargé sur le socle, si le téléphone se trouve à proximité d’un

endroit comportant des concentrations de gaz inflammables, à moins que la ventilation soit adéquate. Une

flammèche dans un tel endroit pourrait provoquer un incendie ou une explosion. De tels environnements

peuvent comprendre: des endroits où l’on utilise de l’oxygène médical sans ventilation adéquate; des gaz

industriels (dissolvants de nettoyage, des vapeurs d’essence, etc.); une fuite de gaz naturel, etc.

Ne placez que le combiné de votre téléphone près de votre oreille lorsqu’en mode de conversation.

Ces adaptateurs ont été conçus pour être orientés en position verticale ou montés au sol. Les broches ne sont

pas conçues pour maintenir l’adaptateur en place si celui-ci est barnché dans une prise au plafond ou sous

une table/ armoire.

CONSERVEZ CES INSTRUCTIONS

Pile

MISE EN GARDE : N’utilisez que la pile incluse.

Ne jetez pas la pile au feu. Vérifiez les instructions spécifiques de mise aux rebus auprès des autorités

locales.

N’ouvrez pas et ne mutilez pas la pile. L’électrolyte qui s’en échapperait est corrosif et pourrait causer des

brûlures ou des blessures aux yeux ou à la peau. L’électrolyte est toxique si avalé.

Soyez prudents lorsque vous manipulez les piles afin d’éviter les courts-circuits provoqués par des

matériaux conducteurs. .

Rechargez la pile incluse ou identifiée pour fonctionner avec cet appareil, selon les instructions et limites

spécifiées dans ce guide d’utilisation.

Stimulateurs cardiaques implantés dans l’organisme

Les simulateurs cardiaques (s’applique uniquement aux téléphones numériques sans fil) :

L’organisme ‘Wireless Technology Research, LLC (WTR)’, une firme de recherche indépendante, a mené

une évaluation pluridisciplinaire des interférences entre les téléphones sans fil portatifs et les stimulateurs

cardiaques implantés dans l’organisme. Appuyée par l’Administration des aliments et drogues (FDA) des

États-Unis, la firme WTR recommande aux médecins :

Avis aux détenteurs de stimulateurs cardiaques

Ils doivent tenir le téléphone sans fil à une distance d’au moins six pouces du stimulateur cardiaque.

Ils ne doivent PAS placer le téléphone sans fil directement sur le stimulateur cardiaque, tel que dans une

poche de chemise, lorsque celui-ci est en marche.

Ils doivent utiliser le téléphone sans fil en l’appuyant sur l’oreille qui se trouve dans la direction opposée

au stimulateur cardiaque.

L’étude effectuée par l’organisme WRS n’a pas identifié de risque pour les détenteurs de simulateurs

cardiaques causés par les gens qui utilisent un téléphone sans fil à proximité de ceux-ci.

10.

11.

12.

•

13.

14.

15.

16.

•

For C-UL compliance only

À propos des téléphones sans l

Condentialité : Les mêmes caractéristiques qui constituent des avantages pour les téléphones sans

ﬁl afﬁchent également des restrictions. Les appels téléphoniques sont transmis entre le combiné sans

ﬁl et le socle par le biais d’ondes radio ; il y a donc la possibilité que vos conversations téléphoniques

sans ﬁl soient interceptées par des équipements de réception radio se trouvant dans la portée du

combiné sans ﬁl. Pour cette raison, vous ne devez pas percevoir les communications téléphoniques

sans ﬁl comme étant aussi conﬁdentielles que celles des téléphones à cordons.

Alimentation électrique : Le socle de ce téléphone sans ﬁl doit être branché à une prise électrique

fonctionnelle. La prise électrique ne doit pas être contrôlée par un interrupteur mural. Les appels ne

pourront pas être effectués du combiné sans ﬁl si le socle est débranché ou mis hors tension ou si le

courant est coupé.

Possibilité d’interférences aux téléviseurs : Certains téléphones sans ﬁl fonctionnent sur des

fréquences pouvant causer des interférences aux téléviseurs et aux magnétoscopes. Pour réduire ou

prévenir de telles interférences, ne placez pas le socle du téléphone sans ﬁl près ou sur un téléviseur

ou magnétoscope. S’il y a présence de parasites, il est conseillé d’éloigner le téléphone sans ﬁl du

téléviseur ou du magnétoscope aﬁn de réduire possiblement les interférences.

Piles rechargeables : Manipulez les piles avec soin aﬁn de ne pas les court-circuiter avec des

bagues, bracelets ou clés. Les piles ou le conducteur peut surchauffer et causer des blessures.

Respectez la polarité adéquate entre la pile et le chargeur.

Les bloc-piles rechargeables à l’hydrure métallique de nickel : Jetez ces blocs-piles de manière

écologique et sécuritaire. Ne les incinérez pas et ne les percez pas. Tel que les autres piles de ce

type, elles pourraient dégager une matière toxique qui peut causer des blessures corporelles si elles

sont brûlées ou percées.

•

Limited warranty

What does this limited warranty cover?

The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or

“you”) that the Product and all accessories provided in the sales package (“Product”) are free from defects in

material and workmanship, pursuant to the following terms and conditions, when installed and used normally

and in accordance with the Product operating instructions. This limited warranty extends only to the Consumer

for Products purchased and used in the United States of America and Canada.

What will VTech do if the Product is not free from defects in materials and workmanship during the

limited warranty period (“Materially Defective Product”)?

During the limited warranty period, VTech’s authorized service representative will repair or replace at

VTech’s option, without charge, a Materially Defective Product. If we repair the Product, we may use new

or refurbished replacement parts. If we choose to replace the Product, we may replace it with a new or

refurbished Product of the same or similar design. We will retain defective parts, modules, or equipment.

Repair or replacement of the Product, at VTech’s option, is your exclusive remedy. VTech will return the

repaired or replacement Products to you in working condition. You should expect the repair or replacement

to take approximately 30 days.

How long is the limited warranty period?

The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech

repairs or replaces a Materially Defective Product under the terms of this limited warranty, this limited

warranty also applies to the repaired or replacement Product for a period of either (a) 90 days from the date

the repaired or replacement Product is shipped to you or (b) the time remaining on the original one-year

warranty; whichever is longer.

What is not covered by this limited warranty?

This limited warranty does not cover:

1. Product that has been subjected to misuse, accident, shipping or other physical damage, improper

installation, abnormal operation or handling, neglect, inundation, ﬁre, water or other liquid intrusion; or

2. Product that has been damaged due to repair, alteration or modiﬁcation by anyone other than an

authorized service representative of VTech; or

3. Product to the extent that the problem experienced is caused by signal conditions, network reliability, or

cable or antenna systems; or

4. Product to the extent that the problem is caused by use with non-VTech accessories; or

5. Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have

been removed, altered or rendered illegible; or

6. Product purchased, used, serviced, or shipped for repair from outside the United States of America or

Canada, or used for commercial or institutional purposes (including but not limited to Products used for

rental purposes); or

7. Product returned without a valid proof of purchase (see item 2 below); or

8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems

outside the unit.

How do you get warranty service?

To obtain warranty service in the USA, please visit our website at www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.

NOTE: Before calling for service, please review the user’s manual - a check of the Product’s controls and

features may save you a service call.

Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and

are responsible for delivery or handling charges incurred in the transport of the Product(s) to the service location.

VTech will return repaired or replaced Product under this limited warranty. Transportation, delivery or handling

charges are prepaid. VTech assumes no risk for damage or loss of the Product in transit. If the Product failure

is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty,

VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity.

You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by

this limited warranty.

What must you return with the Product to get warranty service?

1. Return the entire original package and contents including the Product to the VTech service location along

with a description of the malfunction or difﬁculty; and

2. Include a “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and

the date of purchase or receipt; and

3. Provide your name, complete and correct mailing address, and telephone number.

Other limitations

This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other

written or oral communications related to this Product. VTech provides no other warranties for this Product.

The warranty exclusively describes all of VTech’s responsibilities regarding the Product. There are no other

express warranties. No one is authorized to make modiﬁcations to this limited warranty and you should not

rely on any such modiﬁcation.

State/Provincial Law Rights: This warranty gives you speciﬁc legal rights, and you may also have other rights,

which vary from state to state or province to province.

Limitations: Implied warranties, including those of ﬁtness for a particular purpose and merchantability (an

unwritten warranty that the Product is ﬁt for ordinary use) are limited to one year from the date of purchase.

Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation

may not apply to you. In no event shall VTech be liable for any indirect, special, incidental, consequential,

or similar damages (including, but not limited to lost proﬁts or revenue, inability to use the Product or other

associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use

of this Product. Some states/provinces do not allow the exclusion or limitation of incidental or consequential

damages, so the above limitation or exclusion may not apply to you.

Please retain your original sales receipt as proof of purchase.

Technical specications

Frequency control Crystal controlled PLL synthesizer

Transmit frequency Handset: 1921.536-1928.448 MHz

Channels 5

Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary

according to environmental conditions at the time of use.

Power requirements Handset: 2.4V Ni-MH battery

Charger: 6V AC @ 300mA

Memory Handset directory:

50 memory locations; up to 30 digits and 15 characters

Handset caller ID log:

50 memory locations; up to 24 digits and 15 characters

VTech Communications, Inc.

A member of THE VTECH GROUP OF COMPANIES.

VTech is a registered trademark of VTech Holdings Limited.

Speciﬁcations are subject to change without notice.

Document order number: 91-007223-020-100

Designed to fit your home.

And your life.

VTech CS6609 Manuel utilisateur

Marque: VTech

Modèle: CS6609

Catégorie: Téléphones

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: VTech CS6609 User manual

VTech CS6609 Manuel utilisateur

VTech CS6609 Manuel utilisateur

dans d''autres langues

Documents connexes