Jenn-Air JS42NXFXDW05 Guide d'installation

Marque: Jenn-Air

Modèle: JS42NXFXDW05

Catégorie: Frigos

Taper: Guide d'installation

Ce manuel convient également à

JENN-AIR_SIDEBYSIDEBUILT-INREFRIGERATOR

REFRIGERADOREMPOTRADO

DEDOSPUERTASJENN-AII_

RI_FRIGI_RATEURENCASTRI_COTE.,_CO'IEJENN-AII_

INSTALLATIONGUIDE

For questions about features, operation/performance, parts, accessories, or service, call:

1-800-JENNAIR (1-800-536-6247) or visit our website at www.jennair.com.

In Canada, call: 1-800-807-6777, or visit our website at www.jennair.ca.

GUIIA DEINSTALACION

Si tiene preguntas respecto a las caracteristicas, funcionamiento, rendimiento, partes, accesorios o servicio tecnico, Ilame al:

1-800-JENNAIR (1-800-536-6247) o visite nuestro sitio de internet: www.jennair.com.

En CanadA, Ilame al: 1-800-807-6777, o visite nuestro sitio de internet: www.jennair.ca.

GUIDED'INSTALLATION

Au Canada, pour assistance, installation ou service, composez le 1-800-807-6777 ou visitez notre site web &www.jennair.ca.

Table of Contents/[ndice/Table des matieres ...................................................................................... 2

JENN-AIR°

W10379136B

TABLEOF CONTENTS

REFRIGERATOR SAFETY ............................................................. 3

MODELS .......................................................................................... 4

Accessories .................................................................................. 5

INSTALLATION REQUIREMENTS ................................................ 5

Tools and Parts ............................................................................ 5

Location Requirements ................................................................ 7

Electrical Requirements ............................................................... 8

Water Supply Requirements ........................................................ 8

Product Dimensions ..................................................................... 9

Tipping Radius ............................................................................. 9

Door Swing Dimensions ............................................................... 9

Cabinet and Panel Installation Options ..................................... 10

Fully Integrated Grille Installation Requirements ....................... 11

Standard Integrated Grille Installation Requirements ................ 12

Panel Kit Installation Requirements ........................................... 12

Custom Wood Overlay Panels ................................................... 13

Custom Wood Overlay Panel Dimensions ................................. 13

INSTALLATION INSTRUCTIONS ................................................ 14

Unpack the Refrigerator............................................................. 14

Move the Refrigerator into House .............................................. 14

Install Anti-Tip Boards ................................................................ 15

Connect the Water Supply ......................................................... 15

Plug in Refrigerator ..................................................................... 17

Install Side Trims ........................................................................ 17

Move Refrigerator to Final Location........................................... 17

Level and Align Refrigerator ....................................................... 18

Install Refrigerator and Panels ................................................... 19

Install Handles ............................................................................ 23

Install Base Grille ........................................................................ 24

Complete Installation.................................................................. 24

[NDICE

SEGURIDAD DEL REFRIGERADOR ........................................... 25

MODELOS ..................................................................................... 26

Accesorios .................................................................................. 27

REQUlSITOS DE INSTALACION ................................................. 27

Piezas y herramientas ................................................................ 27

Requisitos de ubicacion ............................................................. 29

Requisitos electricos .................................................................. 30

Requisitos del suministro de agua ............................................. 30

Medidas del producto ................................................................ 31

Arco de vuelco ........................................................................... 32

Medidas de oscilacion de las puertas ....................................... 32

Opciones para la instalacion del armario y los paneles ............ 32

Requisitos para la instalacion de la rejilla

completamente incorporada ...................................................... 33

Requisitos para la instalacion de la rejilla

incorporada estandar ................................................................. 35

Requisitos de instalacion del juego de paneles ........................ 35

Paneles de madera recubiertos a la medida ............................. 36

Dimensiones del panel de madera recubierto ........................... 36

INSTRUCCIONES DE INSTALACION ......................................... 37

Desempaque el refrigerador ...................................................... 37

Como introducirel refrigerador en la casa ................................ 37

Como instalar los tableros antivuelco ........................................ 38

Conexion del suministro de agua .............................................. 38

Como enchufar el refrigerador ................................................... 40

Instalacion de las molduras laterales ......................................... 40

Como mover el refrigerador a su ubicacion final ....................... 41

Nivelacion y alineamiento del refrigerador ................................. 41

Instalacion del refrigerador y los paneles .................................. 42

Instalacion de las manijas .......................................................... 47

Instalacion de la rejilla de la base .............................................. 47

Como terminar la instalacion ..................................................... 48

TABLEDESMATIERES

SI_CURITI_ DU RI_FRIGI_RATEUR .............................................. 49

MODI=LES ..................................................................................... 50

Accessoires ................................................................................ 51

EXIGENCES D'INSTALLATION ................................................... 51

Outillage et pieces ...................................................................... 51

Exigences d'emplacement ......................................................... 53

Specifications electriques ......................................................... 54

Specifications de I'alimentation en eau ..................................... 54

Dimensions du produit ............................................................... 55

Rayon de basculement .............................................................. 56

Dimensions pour le pivotement des portes ............................... 56

Options d'installation du placard et du panneau ...................... 56

Specifications d'une installation grille totalement int6gree .......57

Criteres d'une installation grille integr6e standard .................... 59

Specifications pour I'installation

de I'ensemble de panneaux ....................................................... 59

Panneaux de bois decoratifs personnalises .............................. 60

Dimensions des panneaux de bois

decoratifs personnalises ............................................................ 60

INSTRUCTIONS D'INSTALLATION ............................................. 61

Deballage du r6frigerateur .......................................................... 61

Faire entrer le refrig6rateur dans le domicile ............................. 61

Installation de planches antibasculement .................................. 62

Raccordement &I'alimentation en eau ...................................... 62

Branchement du le r6frigerateur ................................................ 64

Installation des garnitures laterales ............................................ 64

Deplacement du refrig6rateur & son emplacement definitif ......65

Reglage de I'aplomb et alignement du refrig6rateur ................. 65

Installation du r6frigerateur et des panneaux ............................ 66

Installation des poignees ............................................................ 71

Installation de la grille de la base ............................................... 72

Achever I'installation .................................................................. 72

REFRIGERATORSAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Tip Over Hazard

Refrigerator is top heavy and tips easily when not

completely installed.

Keep doors taped closed until refrigerator is

completely installed.

Use two or more people to move and install

refrigerator.

Failure to do so can result in death or serious injury.

MODELS

Custom-Made Panel Design

Features custom-made panels and custom hardware

provided by the cabinetmaker for a seamless appearance

designed to blend with existing kitchen cabinetry.

Base Model Numbers: JS42NXFXDW, JS48NXFXDW

I r

Pro-Style ®Stainless Design

Features stainless steel wrapped doors and Pro-Style ®handles

with diamond-etched grip.

Base Model Numbers: JS42NXFXDW, JS48NXFXDW

Kit Model Numbers: JPK42SNXWPS, JPK48SNXWPS

] [

Euro-Style Stainless Design

Features stainless steel wrapped doors with new Euro-style

handles designed to compliment the Jenn-Air Euro kitchen suite

or enhance any kitchen decor.

Base Model Numbers: JS42NXFXDW, JS48NXFXDW

Kit Model Numbers: JPK42SNXWSS, JPK48SNXWSS

Oiled-Bronze Design

Features intricate copper strokes that integrate seamlessly into

your kitchen while slightly curved matching handles add to the

refrigerator's expressive form.

Base Model Numbers: JS42NXFXDW, JS48NXFXDW

Kit Model Numbers: JPKSNXWSR, JPK48SNXWSR

FloatingGlassDesign

Classicblackorwhiteglasspanelsthatseeminglyfloatinplace

withslightlycurved,colorcoordinatinghandlesthatwill

complimentyourcontemporarykitchen.

BaseModelNumbers:JS42NXFXDW,JS48NXFXDW

KitModelNumbers:

BlackGlass-JPK42SNXWSY,JPK48SNXWSY

WhiteGlass-JPK42SNXWSF,JPK48SNXWSF

AllfactorypartsareavailablethroughyourJenn-AirdealerorbycallingJenn-Airat1-800-JENNAIR(1-800-536-6247).InCanada,call

1-800-807-6777.

Door Handle Kits

These handle kits can be ordered to use on custom wood overlay

panels. Follow the kit instructions for installing the door handles.

Pro-Style ®Stainless Steel - W10250643

Euro-Style Stainless Steel - W10250640

Classic Euro-Style - W10250637

Armoire-Style Door Panel Kit

Follow the kit instructions for installation.

42" Model - W10292393

48" Model - W10292394

INSTALLATIONREQUIREMENTS

IMPORTANT:

• Installer: Leave Installation Instructions with the homeowner.

• Homeowner: Keep Installation Instructions for future

reference. Save these Installation Instructions for the local

electrical inspector's use.

Tools Needed:

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed

here.

• Cordless drill

• Drill bits

• Adjustable wrenches (2)

• Phillips screwdriver

• Small level

• 3/32"hex key

(panel kits only)

• 11/32" nut driver

• 3/8"and 1/2"open-end wrenches

• %2" and 3/le"hex key

• 1/4"and %e" socket drivers

• Tape measure

• Utility knife

• Tape (painters)

• Appliance dolly

PartsNeeded:

• #8x3"(7.6cm)woodscrews(longerscrewsmaybeneeded)(6)

• 2"x4"x32"(5cmx10cmx81cm)woodboard(s)(1or2)

• Customwoodoverlaypanels--consultaqualified

cabinetmakerorcarpentertomakethecustomwoodpanels.

See"CustomWoodOverlayPanels"formoreinformation.

Panelkits--See"36"Modelsor42"FrenchDoorModels"for

panelkitinformation.

• Flexible,codesapprovedwatersupplytubing,aferrule,a

unionanda1/4"(6.35ram)compressionfitting.

Parts Provided:

Slotted hex-head screw

W10141645 (21)

Hex-head blunt screw

W10142233 (4)

Phillips-head flat screw

8281251 (28)

Door Adjustment Pin

W10234194 5)

io r" }

Drawer Panel Bracket

W10203457 5)

Hex-head pointed screw

W10141189 (4)

Round-head screw

1163283 (24)

Door panel stud

W10129563 (4)

Door Stop Pin

W10234202 5)

Standard Integrated Grille

Bracket

W10182743-- Left (1)

W10182741--Right (1)

Fully Integrated Grille Bracket

W10260890-- Left (1)

W10260891 -- Right (1)

Panel top bracket

W10192849 (2)

RC Hinge Cover Trim

W10199873--42" SxS

W10199875--48" SxS

W10202875--36" BM (Right)

W10202510--42" FDBM (Right)

Panel templates

W10222281 --SxS

W10222279--BM

W10222283--Grille

Installation block

W10234156

Filler Board "L" Bracket

W10234199 5)

L,.

Top Grille Lower Trim

W10250961--36" BM (1)

W10250962--42" BM, SxS (1)

W10250963-- 48" SxS (1)

FC Hinge Cover Trim

W10199886--42"SxS

W10199888--48"SxS

W10202877--36" BM (Left)

W10202511--42"FDBM (Left)

Handle Side Door Trim

W10167367--SxS

W10188556-- BM (Left)

W10202604-- BM (Right)

W10202478-- FDBM (Right)

W10202480-- FDBM (Left)

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

IM PORTANT:

• Observe all governing codes and ordinances.

• It is recommended that you do not install the refrigerator near

an oven, radiator, or other heat source.

• Do not install in a location where the temperature will fall

below 55°F (13°C).

• Floor must support the refrigerator weight, more than 600 Ibs

(272 kg), door panels and contents of the refrigerator.

Flooring under refrigerator must be at same level as the room.

Face of cabinetry must be plumb.

• Ceiling height must allow for side tipping radius. See "Tipping

Radius."

• Location should permit door to open fully. See "Door Swing

Dimensions."

• Location must permit top grille removal. See "Opening

Dimensions."

Opening Dimensions

IM PORTANT:

• The width of the opening (Width A), from side to side, must be

as specified for your model, for at least 2" (5.08 cm) back

from the face of the cabinet.

NOTE: If your opening does not meet this requirement, you

will need to make modifications.

• A solid soffit or wall cabinet must be installed 84" (213.4 cm)

above the floor. If the solid soffit is higher than 84" (213.4 cm)

or one is not available, then the refrigerator must be braced.

If the anti-tip boards are needed, they must be attached to

the rear wall studs so that there is 84" (213.4 cm) from the

bottom of the anti-tip board to the floor. See "Install Anti-Tip

Boards" for more information.

• For a fully integrated installation, a minimum of 6" (15.24 cm)

of open space above the refrigerator is required. See "Fully

Integrated Installation." Anti-tip boards are required. See

"Install Anti-Tip Boards" for more information.

• A grounded 3 prong electrical outlet should be located within

a specified number of inches from the right-hand side

cabinets or end panel. See the chart following the graphic for

the number of inches required for your model. For more

information, see "Electrical Requirements."

• The water shutoff should be located in the base cabinet on

either side of the refrigerator or some other easily accessible

area. If the water shutoff valve is not in the cabinets, the

plumbing for the water line can come through the floor. See

"Water Supply Requirements" for more information.

84" (213.4 cm)

to bottom of solid soffit

Dimension

77"

(196 cm)

Width

(see chart following)

r I'

C Depth

Width A (as shown Dimension B(as

Model above) shown above)

42 42" (106.7cm) 10" (25.4 cm)

48 48" (121.9cm) 16" (40.6 cm)

Installation Type Depth C (as shown above)

Standard Flush 25" (63.5 cm) minimum

(new installation)

Retrofit Installations 24" (60.9 cm) minimum

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Before you move your refrigerator into its final location, it is

important to make sure you have the proper electrical

connection.

Recommended Grounding Method

A 115 volt, 60 Hz., AC only, 15- or 20-amp fused, grounded

electrical supply is required. It is recommended that a separate

circuit serving only your refrigerator be provided. Use an outlet

that cannot be turned off by a switch. Do not use an

extension cord.

IMPORTANT: If this product is connected to a GFCI (Ground

Fault Circuit Interrupter) protected outlet, nuisance tripping of the

power supply may occur, resulting in loss of cooling. Food quality

and flavor may be affected. If nuisance tripping has occurred,

and if the condition of the food appears poor, dispose of it.

NOTE: Before performing any type of installation, cleaning, or

removing a light bulb, remove the top grille and turn the master

power switch to OFF or disconnect power at the circuit breaker

box.

When you are finished, turn ON the master power switch or

reconnect power at the circuit breaker box. Then reset the control

to the desired setting.

All installations must meet local plumbing code requirements.

The water shutoff should be located in the base cabinet on

either side of the refrigerator or some other easily accessible

area. The water supply line, however, must come up through

the floor in the gray shaded area shown.

NOTE: There is not enough clearance to achieve a flush

installation if a water shutoff valve is located in the wall

behind the refrigerator.

(15.2 cm)

1" ,_ 6""

(2.54 cm) (15.2 c

• A 1/2"(12.7 mm) hole for plumbing should be drilled on the

floor at least 6" (15.2 cm) from the right or left hand side

cabinet and should be no more than 1" (2.54 cm) away from

the back wall. See "Connect the Water Supply.

• The water supply connection is made at the front of the

refrigerator.

• If additional tubing is needed, use copper tubing and check

for leaks. Install the copper tubing only in areas where the

household temperatures will remain above freezing.

• Do not use a piercing-type or 3/le"(4.76 mm) saddle valve

which reduces water flow and clogs more easily.

NOTE: Your refrigerator dealer has a kit available with a 1/4"

(6.35 mm) saddle-type shutoff valve, a union, and copper

tubing. Before purchasing, make sure a saddle-type valve

complies with your local plumbing codes.

Water Pressure

A cold water supply with water pressure between 30 and 120 psi

(207 and 827 kPa) is required to operate the water dispenser and

ice maker. Ifyou have questions about your water pressure, call a

licensed, qualified plumber.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of a

reverse osmosis system going to the water inlet valve of the

refrigerator needs to be between 30 and 120 psi (207 and

827 kPa).

If a reverse osmosis water filtration system is connected to your

cold water supply, the water pressure to the reverse osmosis

system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).

If the water pressure to the reverse osmosis system is less than

40 to 60 psi (276 to 414 kPa):

• Check to see whether the sediment filter in the reverse

osmosis system is blocked. Replace the filter if necessary.

• Allow the storage tank on the reverse osmosis system to refill

after heavy usage.

• If your refrigerator has a water filter, it may further reduce the

water pressure when used in conjunction with a reverse

osmosis system. Remove the water filter cartridge.

If you have questions about your water pressure, call a licensed,

qualified plumber.

IM PORTANT:

The depth from the front face of the doors to the back of the

refrigerator cabinet is 24" (60.96 cm) without panels.

The power cord is 84" (213 cm) long.

The water supply connection is made at the bottom front of

the refrigerator.

TopView

24"

(61.0 cm)

Model A

42 41¾" (106 cm)

48 473/4'' (121.3cm)

Front View

• Width dimensions were measured from hinge to hinge.

• When leveling legs are fully extended to 11/4"(3.2 cm) below

rollers, add 1V4"(3.2 cm) to the height dimensions.

*83%"

(211.8 cm)

._L

(see chart following)

Model Width A (hinge edge to hinge edge)

42 413/4"(106 cm)

48 473/4'' (121.3 cm)

Tqpp ng ky d t s

Be sure there is adequate ceiling height to stand the refrigerator

upright when it is moved into place.

• The dolly wheel height must be added to the tipping radius

when a dolly is used.

Side Tipping Radius

The side tipping radius varies depending upon the width of the

model. Use the chart provided to determine the side tipping

radius.

NOTE: Tip on side only.

i I

s" II

ii ii

Model Tipping Radius A

42 913/8"(232.1 cm)

48 943/8"(239.7 cm)

The location must permit both doors to open to a minimum of

90°. Allow 41/2'' (11.4 cm) minimum space between the side of the

refrigerator and a corner wall.

NOTE: More clearance may be required if you are using wood

overlay panels, custom handles, or extended handles.

A B c

I°L\ --- i!\\\

Model A B C D

42 40¾" 39¾" 453/8'' 46¾"

(103.5cm) (101.0cm) (115.3cm) (118.8cm)

48 431/4'' 42" 48%" 501/4''

(109.9 cm) (106.7 cm) (123.5 cm) (127.6 cm)

bel cxx:: Op tons

NOTE: Graphics shown below illustrate installation configuration options given the specified cabinet depths. All possible configurations

are not shown.

Cabinet Depth--25" (63.5 cm)

Framed Cabinetry

TopView

Inset

TopView

A. Refrigerator door

B. Door panel

C. Side trim

D. Adjacent cabinet

E. Grille bracket

F. 25" (63.5 cm)

Cabinet Depth--24" (60.9 cm)

NOTE: A flush installation is not possible with a 24" (60.9 cm)

deep opening.

Framed Cabinetry

Top View

A B

A. Refrigerator door

B. Door panel

C. Side trim

D. Adjacent cabinet

E. Grille bracket

F. 24" (60.9 cm)

Frameless Cabinetry

TopView

A B

A. Refrigera tor door

B. Door panel

C. Side trim

Frameless Cabinetry

TopView

D. Adjacent cabinet

E. Grille bracket

F. 25" (63.5 cm)

A B

A. Refrigerator door

B. Door panel

C. Side trim

D.Adjacent cabinet

E. Grille bracket

F. 24" (60.9 cm)

A B

A. Refrigerator door

B. Door panel

C. Side trim

D. Adjacent cabinet

E.Grille bracket

F. 25" (63.5 cm)

The refrigerator can be installed fully integrated if the adjacent

cabinetry meets the airflow venting requirements critical to

refrigerator performance. A Fully Integrated Grille installation has

no visible air gap because the grille extends upward to the soffit

or upper cabinet.

IM PORTANT:

6" (15,24 cm)

• A Fully Integrated Grille installation requires a minimum of 6" min.

(15.24 cm) of open space above the refrigerator. This space ,I,

must not be blocked in any way, including by soffits.

• Both Standard and Fully Integrated Grille installations can be

achieved with either a 24" (60.9 cm) or 25" (63.5 cm) deep

opening.

• A full height grille is used to achieve a Fully Integrated Grille

installation. Use the integrated bracket (provided with

refrigerator) to attach the full height grille.

NOTE: A top grille filler is not required with a full height grille.

Integrated Grille Bracket

Fully Integrated Grille Installation--Side View

Fully Integrated Grille Installation Options

Option 1--Open to Ceiling

84"

(213.4 cm)

A. False front (optional)

B. Airflow

C. Full height grille

D. Doorpanel

Option 2-False Front (cabinet face only)

6" (15.24 cm)

mln,

111,

84"

(213.4 cm)

IMPORTANT:

• A Standard Integrated Grille installation can be achieved with

either a 24" (60.9 cm) or 25" (63.5 cm) deep opening.

• Use the standard grille bracket (provided with refrigerator) to

attach the standard grille.

• The grille panel height, shown inthe "Standard Integrated

Grille Installation--Side View" graphic, allows for an air gap

critical to refrigerator performance.

Standard Grille Bracket

Standard Integrated Grille Installation--Side View

..................B

I I

Standard Integrated Grille Installation--Full Product View

........ C

C. Airflow

A. Top grille filler D. Grille panel

B. Soffit E. Door panel

C. Airflow

See the "Models" section to see the panel kit options available

for your model.

IM PORTANI"."

• A panel kit installation can be achieved with either a 24"

(60.9 cm) or 25" (63.5 cm) deep opening.

• A standard grille is used to achieve a panel kit installation.

Use the standard grille bracket (provided with refrigerator) to

attach the standard grille.

• The grille panel height, shown in the "Panel Kit Installation--

Side View" graphic, allows for an air gap critical to refrigerator

performance.

Standard Grille Bracket

• The weight of the top grille wood overlay panel cannot

exceed 8 Ibs (3.6 kg) for 48=models or 7 Ibs (3.2 kg) for 42=

models.

• The required thickness for all panels is 3/4"(1.91 cm).

• This installation does not require filler or backer panels.

Door Panels

A. Soffit C. Grillepanel

B.Airflow D.Door panel

Panel Kit Installation-- Full Product View

Custom wood overlay panels allow you to blend the exterior of

your refrigerator into the overall kitchen decor, and to use custom

handles for additional design flexibility.

In some cases, your cabinet manufacturer may choose to work

with one panel routed for the different dimensions. Follow these

panel dimension and placement instructions to be sure that the

custom wood overlay panels will fit properly.

IM PORTANT:

• The weight of the refrigerator door wood overlay panel

cannot exceed 66 Ibs (29.9 kg) for 48 =models or 65 Ibs

(29.5 kg) for 42 =models.

• The weight of the freezer door wood overlay panel cannot

exceed 50 Ibs (23 kg) for 48 =models or 49 Ibs (22.2 kg) for

42 =models.

741/4"

(188.6 cm)

Freezer

Door Panel

Refrigerator

Door Panel

Pinch Hazard

Installation of door panels with less than a 3/8"(0.95 cm) gap

between the door panel and the adjacent cabinet increases

the risk of potential pinching.

Model 42 48

Reveal %" 1/&,, 3/8,, W'

A 179/le'' 1713/16'' 201/le'' 208/1e''

(44.61 cm) (45.24 cm) (50.96 cm) (51.59 cm)

B 23e/16'' 2313/16'' 271/16'' 278/16''

(59.85 cm) (60.48 cm) (68.74 cm) (69.37 cm)

Grille Panel

Fully Integrated Grille Installation-- Full Height Grille--

Open Soffit

_{ C )'1

Model 42 48

Reveal 3/8" W' %" W'

C 411/4" 413/4" 471/4'' 473/4''

(104.78cm) (106.05cm) (120.02 cm) (121.29cm)

Standard Grille Installation--Flush Grille--Open or Closed

Soffit

I-' D "1

1"(2.54cm)I TopGrilleFiller I

I" E '-I

53/4" t

Model 42 48

Reveal 3/8" 1/8" 3/8" 1/8"

D 411/4" 41%" 471/4" 47%"

(104.78 cm) (106.05 cm) (120.02 cm) (121.29 cm)

E 411/4" 41%" 471/4'' 47%"

(104.78 cm) (106.05 cm) (120.02 cm) (121.29 cm)

IMPORTANT: The grille panel height, shown in the "Standard

Integrated Grille Installation--Side View" graphic, allows for an air

gap critical to refrigerator performance.

INSTALLATIONINSTRUCTIONS

Tip Over Hazard

Refrigerator is top heavy and tips easily when not

completely installed.

Keep doors taped closed until refrigerator is

completely installed.

Use two or more people to move and install

refrigerator.

Failure to do so can result in death or serious injury.

IMPORTANT:

• Do not remove the film covering until the refrigerator is in its

operating location.

• All four leveling legs must contact the floor to support and

stabilize the full weight of the refrigerator.

• Keep the cardboard shipping piece or plywood under the

refrigerator until it is installed in the operating location.

1. Remove and save the literature package and hardware kit

located inside the refrigerator. Remove and save the

literature, grille, and trim taped to the outside of the

refrigerator.

NOTE: Do not remove tape and door bracing until the

refrigerator is in its final location.

Move ;'he

Tip Over Hazard

Refrigerator is top heavy and tips easily when not

completely installed.

Keep doors taped closed until refrigerator is

completely installed.

Use two or more people to move and install

refrigerator.

Failure to do so can result in death or serious injury.

Place an appliance dolly under the left side of the refrigerator

as shown. Place the corner posts from the packing materials

over the trims as appropriate. Slowly tighten the strap.

2. Place pieces of the shipping carton on the floor when rolling

the dolly and refrigerator into the house. Move the refrigerator

close to the built-in opening.

3. Place top of cardboard carton or plywood under refrigerator.

4. Stand the refrigerator up. First, place the left bottom edge of

the refrigerator on the floor, stand the refrigerator upright and

then lower the right-hand side of the refrigerator to the floor.

5. Reassemble the trim and top grille after the dolly has been

removed from the refrigerator.

A' t,,:R© Bo<:; ds

IMPORTANT:

• If a solid soffit is not available, an anti-tip board must be

installed.

• It is recommended that board(s) be installed before the

refrigerator is installed.

• Board(s) must be long enough to fully cover the width of the

compressor cover.

• Locate the board(s) so the bottom surface(s) of the board(s)

is(are) 84" (213 cm) from the floor.

• During installation, raise the refrigerator up until the top of the

refrigerator is making contact with the bottom of the anti-tip

board(s). Do not crush the compressor cover when raising the

rear leveling legs.

To Install Anti-tip Boards

1. Mark the stud locations on rear wall 80" to 90" (203 cm to

229 cm) above floor.

2. Securely attach one or two 2" x 4" x 32" (5 cm x 10 cm x

81 cm) boards to wall studs behind refrigerator. Use six

#8 x 3" (7.6 cm) (or longer) wood screws. The wood screws

must be screwed into the studs at least 11/2"(3.8 cm). The

board(s) must overlap the compressor cover.

A B

2" (5 cm)

• I

...... C

_?_"1/4"(6 ram)

max.

84 II

(213.4 cm)

A. Center board _" (6.35 mm) max. above refrigerator

B. Two 2" x 4" x 32" (5 cm x 10 cm x 81 cm) boards

C. Attach to studs with six #8 x 3" (7.6 cm) screws

D. Compressor cover

E.Distance from bottom of anti-tip board to floor

Read all directions before you begin.

IMPORTANT: Ifyou turn the refrigerator on before the water line

is connected, turn the ice maker OFE

Connect to Water Line

Parts Needed:

• Minimum 7 ft (2.13 m)flexible, codes approved water

supply line

Style 1--Shutoff Valve Connection

NOTE: If your water line connection does not look like Style 1,

see "Style 2--Copper Line Connection."

1. Unplug refrigerator or disconnect power supply.

IMPORTANT: Before attaching the tubing to shutoff valve, flush

the main water supply line to remove particles and air in the water

line. Allow enough flow so that water becomes clear. Flushing the

water line may help avoid filters and/or water valves from

becoming clogged.

2. Connect the flexible, codes approved water supply line to the

water shutoff valve by threading the provided nut onto the

shutoff valve as shown.

I1 II

A. Bulb

B. Nut

C. Water tubing

3. Place the end of the tubing into a bucket, and turn shutoff

valve ON.

4. Check for leaks. Tighten any nuts or connections (including

connections at the valve) that leak.

Style 2--Copper Line Connection

NOTE: If there is a water supply line that meets the specifications

in "Water Supply Requirements," proceed to "Connecting to

Refrigerator." If not, use the following instructions to connect to

the household cold water supply.

1. Unplug refrigerator or disconnect power.

2. Turn OFF main water supply. Turn ON nearest faucet long

enough to clear line of water.

3. Locate a 1/2"to 11/4'' (1.25 cm to 3.18 cm) vertical cold water

pipe near the refrigerator.

IMPORTANT:

• Make sure it is a cold water pipe.

• Horizontal pipe will work, but drill on the top side of the

pipe, not the bottom. This will help keep water away from

the drill and keep normal sediment from collecting in the

valve.

4. Determine the length of copper tubing you need. Measure

from the connection on the refrigerator to the water pipe. Add

7 ft (2.1 m) to allow for cleaning. Use 1/4"(6.35 mm) O.D.

(outside diameter) copper tubing. Be sure both ends of

copper tubing are cut square.

5. Using a cordless drill, drill a 1/4"(6.35 mm) hole in the cold

water pipe you have selected.

A. Cold water pipe E. Compression sleeve

B.Pipe clamp R Shutoff valve

C. Copper tubing G.Packing nut

D. Compressionnut

6. Fasten the shutoff valve to the cold water pipe with the pipe

clamp. Be sure the outlet end is solidly in the 1/4"(6.35 mm)

drilled hole in the water pipe and that the washer is under the

pipe clamp. Tighten the packing nut. Tighten the pipe clamp

screws slowly and evenly so washer makes a watertight seal.

Do not overtighten.

IMPORTANT: Before attaching the tubing to shutoff valve, flush

the main water supply line to remove particles and air in the water

line. Allow enough flow so that water becomes clear. Flushing the

water line may help avoid filters and/or water valves from

becoming clogged.

7. Slip the compression sleeve and compression nut on the

copper tubing as shown. Insert the end of the tubing into the

outlet end squarely as far as it will go. Screw compression nut

onto outlet end with adjustable wrench. Do not overtighten

the clamp or the sleeve. This will crush the copper tubing.

8. Turn off the shutoff valve on the water pipe. Coil the copper

tubing.

9. Connect the flexible, codes approved water supply line to the

water shutoff valve by threading the provided nut onto the

shutoff valve.

10. Place the end of the tubing into a bucket, and turn shutoff

valve ON.

11. Check for leaks around the saddle valve. Tighten any nuts or

connections (including connections at the valve) that leak.

Connect to Refrigerator

Parts Supplied:

• 1/4"to 1/4"(6.35mm to 6.35 mm) male-to-male coupling

6 II

(15.2 cm) I

I (17.78 cm)

NOTE: The flexible, codes approved water supply line should

connect to the supply valve through the floor.

1. Unplug the refrigerator or disconnect power.

2. Connect the 7 ft (2.13 m) flexible codes approved water tube

to the water supply valve.

3. Flush the main water supply line to remove particles and air in

the water line. Allow enough flow so that water becomes clear.

4. Tape the 7 ft (2.13 m) flexible codes approved water supply

line to the floor, 7" (17.78 cm) from the left side of the

refrigerator. Tape along the length of the tubing, which will

allow it to pass beneath the refrigerator without interference.

NOTE: Allow a minimum of 26" (66.04 cm) of flexible codes

approved water supply line to be loose at the front of the

refrigerator for connecting to the refrigerator.

5. Connect the 7 ft (2.13 m) flexible codes approved water

supply line to the refrigerator.

NOTE: If the main water shutoff valve is behind the

refrigerator, a secondary water shutoff valve may be installed

in line with the water supply line at the front of the 3roduct.

A. Household water line E. Bulb

B. Nut (purchased) R Nut

C. Ferrule (purchased) G. Refrigerator water tubing

D. Coupfing

6. Turn on the water supply valve and check all connections for

leaks.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can resuR in death,

fire, or electrical shock.

1. Set control switch at top of cabinet to the OFF position.

2. Plug into a grounded 3 prong outlet.

n Sd® ms

The side trims cover the space between the refrigerator and the

adjacent cabinets. There is a trim piece taped to each side of the

refrigerator. Install each trim piece to the side of the refrigerator to

which it is taped.

1. Remove the tape attaching the trim pieces to the sides of the

refrigerator. Set the trim pieces aside.

IMPORTANT: For installations using custom wood panels

with 1/8"gap, the bulb-shaped section of the trim piece will

interfere with the panels. Score each trim piece at the base of

the bulb-shaped section, then remove and discard this

section. See the "Top View" graphic later in this section.

2. Remove the 4 screws from the side of the refrigerator cabinet.

3. Using the original holes and the screws removed in Step 2,

fasten the side trim to the refrigerator cabinet.

NOTE: Make sure to fasten each trim piece to the side of the

refrigerator cabinet from which it was removed. The bulb-

shaped section should be forward with the notch at the top,

as shown.

Top View

A. Side trim C. Door

B.Adjacent cabinet D. Bulb-shaped section

Tip Over Hazard

Refrigerator is top heavy and tips easily when not

completely installed.

Keep doors taped closed until refrigerator is

completely installed.

Use two or more people to move and install

refrigerator.

Failure to do so can result in death or serious injury.

IM PORTANI"."

• To avoid floor damage, make sure levelers are raised (not

touching floor) and refrigerator is on rollers before moving.

• Use the installation block, attached to the door hinge, as a

reference to make sure the refrigerator is pushed back far

enough into the opening, so that when the panels are

installed they will be flush with the adjacent cabinets.

NOTE: A flush installation is not possible with a24" (60.9 cm)

deep opening.

A. Side trim screws

After the refrigerator is leveled and aligned, remove the

installation block from the door hinge and use it to check the

spacing between the panels and adjacent cabinets.

NOTE: The installation block is designed to provide accurate

spacing for 3/4"(1.9 cm), 3/8"(9.53 mm) and 1/8"(3.18 mm).

3/4,,

(1.9 cm)

i ,/8,,

_ (3.18 mm)

(9.53 mm)

1. Place top of cardboard carton or plywood under refrigerator.

Remove dolly.

2. Move the refrigerator straight back and evenly into the

opening. Be sure that the water tubing is not kinked and the

power supply cord is on top of the refrigerator.

NOTE: If the power supply cord is behind the refrigerator, it

will not install properly.

3. Make sure the installation block is flush with the adjacent

cabinets.

NOTE: To achieve a flush installation, it is critical to verify a

3/4"(1.9 cm) depth from the front face of the adjacent

cabinetry to the refrigerator.

After moving the refrigerator to its final location:

1. Use a _e" socket driver to turn the leveling bolts clockwise to

extend the legs to the floor as shown. The rollers should be

off the floor.

A. Rear leveling bolt

B. Front leveling bolt

Adjust the leveling legs to level and align the refrigerator from

left to right and front to back so that the refrigerator is level

and aligned with the cabinets.

Continue adjusting all of the leveling legs to raise the

refrigerator until the top is within at least 1/4"(6.35 mm) of the

top soffit as shown.

NOTE: If an anti-tip board has been used, adjust the leveling

legs until the top of the refrigerator is making contact with the

bottom of the anti-tip board(s). Do not crush the compressor

cover.

A B

s/4"(1.9 cm)

C ....

A. Adjacent cabinet or wall

B. Instaflation block

C. Face of refrigerator

Tip Over Hazard

Refrigerator is top heavy and tips easily when not

completely installed.

Keep doors taped closed until refrigerator is

completely installed.

Use two or more people to move and install

refrigerator.

Failure to do so can result in death or serious injury.

IMPORTANT: All four leveling legs must contact the floor to

support and stabilize the full weight of refrigerator. Rollers are for

moving the refrigerator, not for permanent support.

2" (5 cm)

,_................C

_q/4"(6mm)

max.

84 ,I

(213.4 cm)

A. Center board _" (6.35 mm) max. above refrigerator

B. Two 2" x 4" x 32" (5 cm x 10 cm x 81 cm) boards

C. Attach to studs with six #8 x 3" (7.6 cm) screws

D. Compressor cover

E. Distance from bottom of anti-tip board to floor

IMPORTANT: Adjust in small increments to keep from

damaging the cabinet trim and causing problems with the

door alignment or top grille fit. To avoid damage to the

cabinet or leveling legs, do not apply more than 50 inch-

pounds (5.65 Nm) of torque to the leveling bolts. The leveling

legs can be extended to a maximum of 11/4'' (3.18 cm) below

the rollers.

After leveling the refrigerator, again use a straight edge or 4-ft

level across the front of the refrigerator installation blocks to

the cabinets to check that the refrigerator is still flush.

IMPORTANT: Jenn-Air is not responsible for the removal or

addition of molding or wood overlay panels that would not allow

access to the refrigerator for service.

Install Top Grille Filler (standard installation only)

IMPORTANT: The grille panel height allows the necessary airflow

for refrigerator performance. The top grille filler hides the upper

compartment cover behind the top grille. If you choose to modify

the recommended grille panel dimensions, performance will be

compromised.

Custom Wood Panel Models

1. In the custom made (1" x width of grille panel) wood filler

piece, drill a hole 11_6"from each edge.

NOTE: Make sure the hole is centered in the 1" thickness of

the wood piece.

2. Using slotted hex-head screws (provided with refrigerator),

fasten an "L" bracket to each end of the wood filler piece.

3. Using hex-head blunt screws (provided with refrigerator),

attach the "L" brackets to the top grille mounting plates.

4. Adjust the "L" brackets, so that the wood filler piece is flush

with the bottom of the soffit. Completely tighten the screws.

Side View

A. Custom wood rifler

B. "L" bracket

C. Grille mounting plate

Panel Kit Models

Excessive Weight Hazard

Use two or more people to move and install panels.

Failure to do so can result in back or other injury.

Broken Glass Hazard

Do not hit refrigerator glass doors.

Protect glass surface and edges during installation or

removal of doors.

Failure to do so can result in serious eye injury or

minor cuts.

1. Align top grille vent (provided in the door kit) with the bottom

edge of the soffit. Use as a template, and mark where to drill

the holes.

2. Using the slotted hex-head screws (provided with

refrigerator), attach the top grille vent to the soffit.

Side View

A. Top grille vent

B. Slotted hex-head screw

A. Top grille filler D. Grille panel

B. Soffit E. Door panel

C. Airflow

A. Soffit C. Grille panel

B. Airflow D. Door panel

Predrill Panels (custom wood panels only)

IMPORTANT: The custom panel template shipped with the

refrigerator can be used for either a 3/8"(0.95 cm) or a 1/8"

(0.32 cm) reveal installation.

• The drilling templates are used only for custom wood overlay

panels.

• The drilling templates are double-sided.

• The drilling holes are precut into the template.

1. On the template, locate the diagram of your refrigerator.

Then, follow the letters and colored arrows to correctly place

the drilling template on the back side panels.

NOTE: Check the direction of the arrows to determine which

holes to mark when the template is aligned at the top of the

panel and which holes to mark when the template is aligned

at the bottom of the panel.

2. Predrill 1/8"(0.32 cm) deep pilot holes into the wood rails

bordering the doors and top grille panels.

Predrill Panels (panel kits only)

IMPORTANT: The panels included in the panel kits are marked

for the location of the mounting brackets only.

1. Predrill holes where marked. See "Complete Installation" later

in this section, for instructions on drilling additional holes in

the door panels.

2. Peel back the film cover on the door panel in the area of the

brackets and handle studs. Do not fully remove the film

covering until the installation is complete.

Prepare Panels (custom wood and panel kits)

IMPORTANT: The process for installing panels on the refrigerator

is the same for both custom panels and panel kits.

Door Panels

1. Place panels on a firm, covered, flat surface with the front

facing down.

2. Locate the 2 predrilled holes in the handle side edge of the

door panel.

3. Using the installation block as a guide for depth, screw the

door studs (provided with refrigerator) into the predrilled door

panel (2 door studs per door).

For the mounting bracket, insert the hex-head pointed

screws (provided with refrigerator) into the wood at the top of

the door panels where they were predrilled.

NOTES:

It is critical to use the %" screw, the longest length

provided, to attach the bracket to the top of the door

panel. These hex-head pointed screws are used only to

attach this mounting bracket.

• Panel Kits--Insert the hex-head pointed screws into the

slots in the door panel, not the U-shaped holes.

A. U-shapped hole

B. Slot

Attach a mounting bracket to the top edge of each door panel

by placing the large end of the keyhole slot over the screws

and sliding the bracket so that the screws are centered in the

slots.

NOTE: Start with the screws in the center of the slots as

shown, then move the door panel, as necessary, to align.

A B

A. Door panel

B. Mounting bracket

Top Grille Panel

1. Using the slotted hex-head screws (provided with

refrigerator), attach a mounting bracket to each side of the

top grille panel.

IMPORTANT: See the "Parts Provided" section to select the

brackets designated for your installation.

• Use the Integrated Grille brackets for a Fully Integrated

Grille installation with a full height grille.

A. Door stud

B.Installation block

La page charge ...

Jenn-Air JS42NXFXDW05 Guide d'installation

Marque: Jenn-Air

Modèle: JS42NXFXDW05

Catégorie: Frigos

Taper: Guide d'installation

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Jenn-Air JS42NXFXDW05 Installation guide
español: Jenn-Air JS42NXFXDW05 Guía de instalación

Jenn-Air JS42NXFXDW05 Guide d'installation

Ce manuel convient également à

Jenn-Air JS42NXFXDW05 Guide d'installation

dans d''autres langues

Documents connexes

Autres documents