1
Installation Instructions for
Allier 4 and 5 Light Chandelier
1.1
F2935-4-F2936-5
Chandelier
F2935/4, F2936/5
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant
junction boxes.
This product is safety listed for dry locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Screw the stem to the fixture, then screw the stem to the frame.
Install the candle tubes by slipping them through the sockets.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
1
2
1A
LAMP
3
SOCKET
4
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
FIXTURE
CANDLE TUBE
STEM
2
3
1
4
FRAME
1