Legrand IDP-3050-A Eight-Outlet Power Strip Mode d'emploi
- Taper
- Mode d'emploi
Wattstopper
®
Eight-Outlet Power Strip with Personal Sensor (v2)
User Reference Guide
No: 24908 – 09/16 rev. 1
Catalog Number • Numéro de Catalogue • Número de Catálogo: IDP-3050-A
Country of Origin: Made in China • Pays d’origine: Fabriqué en Chine • País de origen: Hecho en China
DESCRIPTION AND OPERATION
The Wattstopper Isolé IDP 3050-A is an advanced energy saving control system, designed for general office use. It combines an
eight-outlet power strip with the DI-110 personal sensor. The IDP 3050-A controls power used by plug load devices, and provides surge
protection. Its use reduces energy costs and helps the environment by turning power-consuming devices off based on occupancy.
THE POWER STRIP
The power strip provides surge protection. It also filters noise caused by electromagnetic interference (EMI) and radio frequency
interference (RFI).
Outlets
Six of the power strip’s eight outlets are controlled by the personal sensor, and the remaining two are uncontrolled.
Switches
The power strip has an ON/OFF switch to turn its outlets on or off.
Diagnostic Lights
“Protected” LED indicator: When the surge protector is operating correctly, the LED indicator labeled “Protected” is lit. When unlit, a
power disturbance or fault has occurred within the unit.
“Grounded” LED indicator: Another LED indicator, labeled “Grounded,” is lit when the wall outlet is properly wired and grounded. The
surge protection will not operate if the power strip is not properly grounded.
Use Uncontrolled outlets for devices that must be continuously
powered (such as a computer).
Use Sensor-Controlled outlets for appliances and items that
don’t need to be powered while you are away from your work
area (such as a light, fan, or monitor).
Power Strip DI-110 Personal Sensor
ON/OFF Switch
Sensor Controlled Outlets
Uncontrolled
Outlets
Diagnostic Lights
800.879.8585
www.legrand.us/wattstopper
No. 24908 – 09/16 rev. 1
© Copyright 2016 Legrand All Rights Reserved.
© Copyright 2016 Tous droits réservés Legrand.
© Copyright 2016 Legrand Todos los derechos reservados.
Wattstopper warranties its products to be free
of defects in materials and workmanship for a
period of five (5) years. There are no obligations
or liabilities on the part of Wattstopper for
consequential damages arising out of, or in
connection with, the use or performance of this
product or other indirect damages with respect
to loss of property, revenue or profit, or cost of
removal, installation or reinstallation.
Wattstopper garantit que ses produits sont
exempts de défauts de matériaux et de fabrication
pour une période de cinq (5) ans. Wattstopper
ne peut être tenu responsable de tout dommage
consécutif causé par ou lié à l’utilisation ou
à la performance de ce produit ou tout autre
dommage indirect lié à la perte de propriété, de
revenus, ou de profits, ou aux coûts d’enlèvement,
d’installation ou de réinstallation.
Wattstopper garantiza que sus productos
están libres de defectos en materiales y mano
de obra por un período de cinco (5) años. No
existen obligaciones ni responsabilidades por
parte de Wattstopper por daños consecuentes
que se deriven o estén relacionados con el
uso o el rendimiento de este producto u otros
daños indirectos con respecto a la pérdida
de propiedad, renta o ganancias, o al costo
de extracción, instalación o reinstalación.
WARRANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA
THE DI-110 PERSONAL SENSOR
The DI-110 personal sensor uses passive infrared technology to detect occupancy within a workspace.
When the sensor detects occupancy, it automatically turns on the power strip’s six controlled outlets. It turns
off these outlets when it no longer senses occupancy in the workspace and the user-set time delay elapses.
(See Time Delay Setting.)
Uncontrolled outlets are continuously powered by the power strip, and remain on regardless of occupancy.
Time Delay Setting
The personal sensor automatically turns off all controlled devices after a workspace becomes vacant and a
pre-set time interval, or time delay, elapses. This setting is user-adjustable.
Turning the trimpot dial (located on the back of the sensor) clockwise or counterclockwise adjusts the time
delay. The range for adjustment is 30 seconds to 30 minutes.
• To adjust to 30 seconds (minimum), turn the dial completely counterclockwise.
• To adjust to 30 minutes (maximum), turn the dial completely clockwise.
• To adjust to 15 minutes, turn the dial half way between its maximal clockwise and counterclockwise positions.
NOTE: Use a small screwdriver to make adjustments.
Initial Warm-up
The personal sensor requires an initial warm-up period of up to two minutes whenever the power strip is initially turned on. During this
time, all connected devices will remain on, regardless of occupancy or the time delay setting.
WARNING: RISK OF ELECTRIC SHOCK. DO NOT PLUG INTO ANOTHER RELOCATABLE POWER TAP.
This device features an internal protection that will disconnect the surge protective component at the end of its useful life, but will
maintain power to the load now unprotected.
NOTE: If the “Protected” LED is not lit, the surge suppression feature has stopped working. Devices requiring surge protection should
not be plugged into the power strip’s outlets when the Protected LED is unlit. The power strip may need to be replaced. Call
Technical Support.
0LQ
0D[
Occupancy sensor lens
LED blinks when
occupancy detected
-
1
-
2
Legrand IDP-3050-A Eight-Outlet Power Strip Mode d'emploi
- Taper
- Mode d'emploi
dans d''autres langues
Documents connexes
-
wattstopper FS-355 Line Voltage Occupancy and Light Level Sensor Guide d'installation
-
Legrand FS-305 Low Voltage Occupancy and Light Level Sensor Guide d'installation
-
-
-
-
-
-
Legrand RS-250-B Guide d'installation
-
Legrand WS-301-347-I Guide d'installation