THERMADOR.COM
Use and Care
GUIDE
Thermador Masterpiece
®
Island Hood
THERMADOR.COM
Models |
Modèles |
Modelos:
HMIB36WS
HMIB42WS
Use and Care
GUIDE
Thermador Masterpiece
®
Wall Hoods
Table of Contents (English) ................................................................... 3
Table de Matières (Français) ................................................................. 20
Índice de Materias (Español).................................................................. 36
Home Connect User’s Information
Wi-Fi
®
Module
FCC/IC
Statements
CMIIT ID: 2017AJ4134 (M)
FCC: 2AHES-COM2
IC: 21152-COM2
The Home Connect module is a communication
device designed to provide communication between
appliances and smart devices.
This module is integrated at the factory, under direct control of BSH Home
Appliances Corporation, and is not user serviceable or upgradable.
At least 20 cm separation distance should be maintained from device to user.
FCC COMPLIANCE STATEMENT
CAUTION: Changes or modifications not expressly approved could void your authority to use
this equipment.
This device complies with Part 15 of the FCC Rules. Operation to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
INDUSTRY CANADA STATEMENT
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil
ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
Page. 3
Congratulations!
Congratulations on your recent
Thermador purchase! Whether you are a
dedicated chef or simply a connoisseur of
the art of cooking, owning a Thermador
kitchen is the ultimate expression of
personal style, good taste and an
appreciation for the complete culinary
experience. Our award-winning products
have been empowering culinary
enthusiasts for more than eleven
decades.
Before you begin using your new
Thermador product, please take a
moment to review the Use and Care
Guide. You will find the answers to all of
your questions as well as some very
important safety information. Pay special
attention to the Important Safety
Instructions located at the beginning of
the
manual. Your Thermador product is
ready and waiting to be used for your
next gourmet creation!
Our products are handcrafted with the
highest quality authentic materials to
ensure years of reliable service. In the
unlikely event that you have a service
question, please have your model and
serial numbers of your product available
(see the “Before Calling For Service”
section for location).
We realize that you have made a
considerable investment in your kitchen.
Please feel free to share your Thermador
kitchen photos and remodeling stories
with us. Follow us on Twitter or post your
kitchen photos on Facebook. We would
love to hear from you!
Thermador wishes you many years of
creative cooking.
Félicitations! ¡Felicidades!
Félicitations pour votre achat d’un
produit Thermador! Que vous soyez un
chef à temps plein ou simplement un
amateur d’art culinaire, être propriétaire
d’une cuisine Thermador est l’expression
ultime de style et de bon goût personnel
ou une appréciation d’une expérience
culinaire complète. Depuis plus de onze
décennies, nos produits primés font le
bonheur des passionnés des arts
culinaires.
Avant d’utiliser votre nouveau produit
Thermador, veuillez prendre quelques
instants pour lire le Guide d’utilisation et
d’entretien. Vous y trouverez les
réponses à toutes vos questions même
que quelques renseignements très
importants de sécurité. Veiller à être très
attentif aux Consignes de sécurité
importantes imprimées au début du
manuel. Votre produit Thermador est
prêt et n’attend que vous pour créer le
prochain plat gourmet!
Nos produits sont issus du travail
d’artisans qui utilisent des matériaux
authentiques d’excellente qualité pour
vous assurer des années de service
fiable. Dans le cas peu probable que
vous ayez une demande de réparation,
veuillez avoir en main les numéros de
modèle et de série du produit (consultez
la section “Avant d’appeler pour une
réparation” pour trouver l’emplacement
de ces numéros).
Nous réalisons que vous avez effectué
un investissement considérable dans
votre cuisine. N’hésitez pas à partager
les photos de votre cuisine Thermador et
de vos récits de rénovation avec nous.
Suivez-nous sur Twitter ou publiez vos
photos de cuisine sur Facebook. Nous
aimerions avoir vos opinions!
Thermador vous souhaite plusieurs
années de cuisine créative.
¡Felicidades por la reciente compra de
su Thermador! Tanto si usted es un gran
jefe de cocina o un simple aficionado del
arte culinario, el hecho de poseer una
cocina Thermador es la última expresión
de su estilo personal, de su buen gusto y
de su apreciación de una experiencia
culinaria completa. Desde hace más de
once décadas, nuestros premiados
productos han estado empoderando a
los entusiastas culinarios.
Antes de empezar a usar su nuevo
producto Thermador, tómese un
momento para leer la Guía de uso y
cuidado. Encontrará respuesta a todas
las preguntas que se plantee, así como
información muy importante sobre
seguridad. Preste especial atención a las
Instrucciones de seguridad importantes
situadas al inicio del manual. ¡Su
producto Thermador está listo y aguarda
que usted lo use en su próxima creación
gastronómica!
Nuestros productos se fabrican a mano
con materiales auténticos de alta calidad
para garantizar años de servicio
confiable. En el caso improbable de que
tenga una pregunta dirigida al servicio
técnico, tenga a mano el número de
modelo y el número de serie de su
producto (consulte la sección “Antes de
llamar al servicio técnico” para saber
dónde se encuentran).
Somos conscientes de que ha realizado
una gran inversión económica en su
cocina. No dude en compartir con
nosotros fotos e historias de la
remodelación de su cocina Thermador.
Síganos en Twitter o publique las fotos
de su cocina en Facebook. ¡Estaremos
encantados de tener noticias suyas!
Thermador le desea muchos años de
cocina creativa!
Use and Care Guide English | 5 |
Table of
Contents
Safety ........................................................................... 3
Important Safety Instructions ................................. 3
Advance Planning .......................................................... 5
Before You Begin .................................................... 5
General Information ................................................. 6
Installation ..................................................................... 7
Installation Considerations ...................................... 7
Ductwork Preparation .............................................. 8
Hood Transition ...................................................... 11
Electrical Requirements .......................................... 11
Choosing the Correct Blower ................................. 11
Preparing the Ceiling Cutout and Housing............. 12
Custom Insert Installation with Hood Trims ............ 13
Blower Motor Installation ....................................... 14
Remote Installation (optional) ................................ 16
Installing Filters and Grease Trays............................ 18
Installer Checklist and Service ........................................ 19
Installer Checklist ..................................................... 19
Before Calling Service ............................................. 19
Product Data Rating Plate ....................................... 19
Service, Parts & Accessories ................................ back page
Safety
Definitions
WARNING
This indicates that death or serious injuries may occur as a
result of non-observance of this warning.
CAUTION
This indicates that minor or moderate injuries may occur
as a result of non-observance of this warning.
NOTICE: This indicates that damage to the appliance or
property may occur as a result of non-compliance with this
advisory.
Note: This alerts you to important information and/or tips.
This THERMADOR® appliance is made by
BSH Home Appliances Corporation
1901 Main Street, Suite 600
Irvine, CA 92614
Questions?
1-800-735-4328
www.thermador.com
We look forward to hearing from you!
Use and Care GuideEnglish | 6 |
Safety
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
INSTALLER: Save these instructions for the local electrical
inspector’s use. Please leave these instructions with this
unit for the owner. Show the owner the location of the
circuit breaker or fuse. Mark it for easy reference.
OWNER: Please retain these instructions for future
reference.
WARNING
If the information in this manual is not followed exactly,
re or shock may result causing property damage or
personal injury.
WARNING
If the information in this manual is not followed
exactly, re or shock may result causing proper-
ty damage, personal injury or death.
- DO NOT store or use gasoline or other ammable
vapors and liquids in the vicinity of this or any other
apppliance.
- WHAT TO DO IF YOU SMELL GAS
• DO NOT try to light any appliance.
• DO NOT touch any electrical switch.
• DO NOT use any phone in your building.
• Immediately call your gas supplier from a
neighbor’s phone. Follow the gas supplier’s
instructions.
• If you cannot reach your gas supplier, call the re
department.
- Installation and service must be performed by an
authorized servicer, service agency or the gas supplier.
WARNING
Turn off power circuit at service panel and lock out panel
before wiring this appliance. Requirement: 120 VAC, 60
Hz 15 A. Allow the appliance to cool after the power has
been turned off before servicing the appliance.
WARNING
Automatically Operated Device
To reduce the risk of injury disconnect from power supply
before servicing.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS, OBSERVE THE
FOLLOWING:
• Use this unit only in the manner intended by the
manufacturer. If you have questions, contact the
manufacturer at the address or telephone number
listed on the back page.
• Before servicing or cleaning unit, switch power off at
service panel and lock the service disconnecting
means to prevent power from being switched on
accidentally. When the service disconnecting means
cannot be locked, securely fasten a prominent
warning device, such as a tag, to the service panel.
WARNING
DO NOT repair or replace any part of the appliance
unless specically recommended in the manuals.
Improper installation, service or maintenance can cause
injury or property damage. Refer to this manual for
guidance. All other servicing should be done by an
authorized servicer.
WARNING
ELECTRICAL SHOCK HAZARD
• DO NOT remove connections.
• DO NOT use an extension cord.
• Failure to follow these instructions can
result in death, re, or electrical shock.
Use and Care Guide English | 7 |
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
Grounding Instructions
WARNING
Improper grounding can result in a risk of electric shock.
This appliance must be grounded. In the event of an electri-
cal short circuit, grounding reduces the risk of electric shock
by providing an escape wire for the electric current.
Be sure your appliance is properly installed and grounded
by a qualied technician. Installation, electrical connections
and grounding must comply with all applicable codes.
If required by the National Electrical Code (or Canadian
Electrical Code), this appliance must be installed on a sepa-
rate branch circuit.
WARNING
To reduce the risk of re or electrical shock, DO NOT use
this appliance with any solid state speed device.
Safety Codes and Standards
This appliance complies with one or more of the following
Standards:
• UL 507, The Standard for the Safety of Electric Fans
• CSA C22.2 No. 113, Fans and Ventilators
It is the responsibility of the owner and the installer to de-
termine if additional requirements and/or standards apply
to specic installations.
CAUTION
Unit is heavy and requires at least two people
or proper equipment to move and install.
Hidden surfaces may have sharp edges. Use
caution when handling the appliance. Failure
to do so may result in property damage or
personal injury.
WARNING
State of California Proposition 65 Warnings:
This product can expose you to chemicals including vinyl
chloride, which is known to the State of California to
cause cancer and birth defects or other reproductive
harm. For more information go to
www.P65Warnings.ca.gov.
Never modify or alter the construction of the appliance.
For example, do not remove panels, wire covers or
brackets/screws.
CAUTION
For general ventilating use only. DO NOT use to exhaust
hazardous or explosive materials and vapors.
WARNING
To reduce the risk of re, use only metal ductwork.
Use a qualied installer.
Remove all tape and packaging before using the
appliance. Destroy the packaging after install. Never allow
children to play with packaging material.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS, OBSERVE THE
FOLLOWING:
• Installation work and electrical wiring must be done
by qualied person(s) in accordance with all
applicable codes and standards, including re-related
construction.
• Sufcient air is needed for proper combustion and
exhausting of gases through the ue (chimney) of
fuel burning equipment to prevent back drafting.
Follow the heating equipment manufacturer’s
guideline and safety standards such as those
published by the National Fire Protection
Association (NFPA), and the American Society for
Heating, Refrigeration and Air Conditioning
Engineers (ASHRAE), and the local code authorities.
• When cutting or drilling into wall or ceiling, do not
damage electrical wiring and other hidden utilities.
• Ducted fans must always be vented to the outdoors.
Use and Care GuideEnglish | 8 |
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
WARNING
TO REDUCE THE RISK OF A RANGE TOP GREASE
FIRE:
• Never leave surface units unattended at high
settings.
Boilovers cause smoking and greasy spillovers that
may ignite. Heat oils slowly on low or medium
settings.
• Always turn hood ON when cooking at high heat
or when cooking ambéing food (i.e. Crepes Suzette,
Cherries Jubilee, Peppercorn Beef Flambe).
• Clean ventilating fans frequently. Grease should
not be allowed to accumulate on fan or lter.
• Use proper pan size. Always use cookware
appropriate for the size of the surface element.
WARNING
TO REDUCE THE RISK OF INJURY TO PERSONS IN
THE EVENT OF A RANGE TOP GREASE FIRE,
OBSERVE THE FOLLOWING:
a
• SMOTHER FLAMES with a close tting lid, cookie
sheet, or metal tray, then turn off the burner. BE
CAREFUL TO PREVENT BURNS. If the ames do not
go out immediately, EVACUATE AND CALL THE
FIRE DEPARTMENT.
• NEVER PICK UP A FLAMING PAN - you may get
burned.
• DO NOT USE WATER, including wet dishcloths or
towels - a violent steam explosion will result.
• Use an extinguisher ONLY if:
a) You know you have a class ABC extinguisher,
and you already know how to operate it.
b) The re is small and contained in the area where
it started.
c) The re department is being called.
d) You can ght the re with your back to an exit.
a
Based on “Kitchen Fire Safety Tips” published by NFPA.
Use and Care Guide English | 9 |
Introduction
Before You Begin
Before using your appliance, be sure to read this manual.
Pay special attention to the Important Safety Instructions
located at the beginning of the manual.
WARNING
To avoid risk of burn, turn the hood ON when cooking at
high heat or when ambéing food.
DO NOT use all heating elements or gas burners simulta-
neously at high settings for a prolonged period. (max.15
minutes).
If the hood is located over a gas cooktop, operate the
hood at maximum setting whenever three or more gas
burners are being used.
DO NOT operate the ventilation system during a cooktop
re.
All Hood models are rated for 120 VAC, using a 15 amp
circuit breaker; see the Installation Manual for more details.
Operating the Appliance
Overview
NOTE: The Use and Care Guide applies to several versions
of this appliance. Accordingly, you may nd descriptions
of individual features that do not apply to your specic
appliance.
IMPORTANT: DO NOT use cooktop, rangetop, or range
while hood is disassembled.
Island Hood
HMIB36WS and HMIB42WS
27’’ (686 mm) in depth, with widths of 36’’ (914 mm) and
42’’ (1067 mm).
This model series features brushed stainless-steel canopy
with LED lights.
6
4
7
1
2
3
3
5
(1) Hood canopy
(2) Touch control
(3) LED lights
(4) Perimetral plate
(5) Filter latch
(6) Hybrid mesh lters
(7) Flue duct
Use and Care GuideEnglish | 10 |
Touch Control Panel
NOTE: Not all features referred to in this manual applies to
all models.
FILTER AUTO LIGHTS CONNECTDELAY
01234
43 5 6 721
(1) FILTER
Clean Filter Reminder
After 40 hours of operation, the FILTER button will illuminate indicating that the filters need to be
cleaned. When this indicator illuminates clean the filters as instructed on page 15. After cleaning,
press and hold the FILTER button for 3 seconds until it beeps to reset the 40-hour period and to
turn the reminder off.
Receive clean filter reminder notification through the Home Connect™ app when activated in Set-
tings section, as well as see filter saturation status.
(2) DELAY
Delay Shut Off
If the blower is off when the DELAY button is pressed, the blower will turn on to the high speed
setting for 10 minutes. Once time has elapsed, the blower will automatically turn off. If the blower
is on when the DELAY button is pressed, the blower runs for 10 minutes from the time the DELAY
button was pressed at the current speed then turns off. During the 10 minute timed period, the
DELAY button is illuminated. To interrupt a timed period, press one of the fan speed buttons or 0
button to turn off.
Ability to choose a different time period and speed than the default setting is possible through the
Home Connect
TM
app in the settings menu.
(3) 0
OFF
Touch ‘0’ once to turn the blower off and reset the control.
(4) 1 – 4
Fan Speed
Increases or decreases the blower speeds. The chosen blower speed LED will remain illuminated
while in operation.
1 – Low
2 – Medium
3 – Medium/High
4 – High
(5) AUTO
Automatic Mode
When in AUTO mode, the hood automatically turns the blower on, depending on the amount of
heat the control senses. It automatically adjusts every 5 minutes. If the control does not sense a
high level of heat, it will turn the blower off.
Remotely control and monitor hood fan speeds through Home Connect™ app.
(6) LIGHTS
LED Light Control
This button controls the LED lighting. The first press turns the lights on. A second press dims the
lights. A third press turns the lights off. 0-100% light slider in Home Connect
TM
app allows additio-
nal control to obtain the perfect level of light.
(7) CONNECT
Home Connect
TM
This function allows the user to connect the hood with a mobile device. See “Home Connect
TM
” on
page 11.
Control tone
To turn OFF/ON the control tone, hold the FILTER and LIGHTS button for 3 seconds.
Control tone can also be turned OFF/ON through the settings section of the Home Connect™ app.
Use and Care Guide English | 11 |
Operating the Hood
For Better Results
• The blower should be turned on for about 5 minutes
before cooking in order to establish air currents upward
through the hood. Thus when heat, smoke, moisture,
grease and cooking odors are produced, they will be
carried outside instead of drifting into other rooms.
• Use the low speeds for normal use and the higher
speeds for strong odors or fumes.
• Drafts across the range or cooktop will reduce the
effectiveness of the hood. Such drafts should be
prevented when possible.
• The best job of ventilation in the kitchen is done where
the only air currents are those created by the blower
itself.
• Regular use of the fan system while cooking helps keep
the kitchen comfortable and less humid.
• Use a rear burner when browning or pan frying meat.
• For optimal performance, the width of the hood should
equal that of the cooktop or rangetop or exceed it by 3
inches on either side. Install these hoods only with
Thermador blowers.
Home Connect
™
With Home Connect™, the appliance is Wi-Fi-capable and
can be remotely controlled using a mobile device (e.g.
tablet PC, smartphone). Home Connect™ app offers
additional functions which are a perfect complement to the
networked appliance.
Home Connect™ does not work over Wi-Fi networks that
require browser registration, i.e. a user name and password
entered via a web browser. You should have a stable wire-
less network with good reception and access to the inter-
net.
If the appliance is not connected to the WLAN network
(home network), it functions in the same way as a typical
hood with no network connection and can be operated as
usual via the Touch Panel.
NOTE: Please ensure that you follow the safety instructions
given at the beginning of this instruction manual and that
these are also observed when operating the appliance via
the Home Connect™ app and when away from home. Plea-
se also follow the instructions in the Home Connect™ app.
NOTE: Operation on the appliance itself always takes
priority, and during this time it is not possible to operate
the appliance using Home Connect™ App.
Cooktop-Hood Sync
You can connect this appliance to a matching cooktop (if
the cooktop supports connection to the hood) and then
control the functions of the hood via your cooktop.
There are various options for connecting the appliances:
Home Connect
TM
Two appliances can be connected using the Home Con-
nect™ app provided that both of them are Home Con-
nect™ compatible.
Refer to the Home Connect™ documents supplied for
more information.
Connecting appliances directly
If the appliance is connected directly to a cooktop, it can-
not be connected to your home network as well. The
appliance will function in the same way as a hood that is not
connected to the network and you can continue to operate
it via the touch control panel.
Connecting appliances via your home network
If the appliances are connected to each other via your
home network, both the hood controls on the cooktop and
Home Connect™ can be used to operate the appliance.
Notes
• Make sure you follow the safety instructions in the
instruction manual for your hood and that these are
complied with even when operating the appliance via
the hood controls on the cooktop.
• If the hood is being operated by means of the touch
control panel on the hood itself, this mode of operation
always has priority. It is not possible to use the hood
controls on the hob during this time.
Use and Care GuideEnglish | 12 |
Setting up a connection
To set up the connection between the hood and the cook-
top, the hood must be switched off and the cooktop must
be switched on before you can connect the cooktop and
hood.
Connecting directly
Ensure that the cooktop is switched on and is in search
mode.
To do this, refer to the section entitled “Connecting to the
hood” in the instruction manual for your cooktop.
Notes
• If your hood is connected directly to the cooktop, it
cannot be connected to your home network as well and
you will not be able to use Home Connect™.
• The cooktop must not be connected to your home
network. To break a connection, follow the instructions
in the section entitled “Disconnecting from the
network”.
Press and hold the CONNECT button until it starts to ash.
The hood has been connected to the cooktop when the
CONNECT button stops ashing and remains continuously
lit.
Connecting via your home network
Follow the instructions in the section entitled “Connecting
your hood to your home network (Wi-Fi) on page 13.
Once the hood is connected to your home network, you
can connect to the hob via the Home Connect™ app. To do
this. follow the instructions on your mobile device.
Setting up
To implement settings via Home Connect™, you must have
installed the Home Connect™ App on a mobile device (e.g.
tablet PC, smartphone).
Follow the steps specied by the app to implement the
settings.
What do you need to connect your hood
to Home Connect™?
• Your smartphone or tablet PC must be running the
latest version of the operating system it uses.
• A home network signal (Wi-Fi) at the location where the
home appliance is located.
• Name and password for your home network (Wi-Fi):
(SSID):..........................................................................
Password:....................................................................
Step 1: Installing the
Home Connect™ app
1. On your smartphone or tablet PC, go to the App
Store (Apple devices) or Google Play Store (Android
devices).
2. Enter “Home Connect” in the store’s search eld.
3. Select the “Home Connect (America)” app published by
BSH Home Appliances Corporation and install it on your
smartphone or tablet.
Open the Home Connect™ app and press “Register” to
create a new Home Connect™ account. The app will
guide you through the registration process. Don’t forget
to make a note of your e-mail address and password
afterwards.
Save your Home Connect™ login details here:
Email:........................................................................
Password:..................................................................
Use and Care Guide English | 13 |
Step 2 (initial start-up): Connecting your
hood to your home network (Wi-Fi)
A. Connect the appliance.
B. Check whether your home network router has A WPS
function (automatic connection) and locate the WPS
button. Refer to the router manual for more information.
C. Does your router have a WPS function (automatic
connection)?
Yes
No
Now go on to Step 2.1 –
Automatic connection
(WPS).
Now go on to Step 2.2 –
Manual connection
(Professional mode).
Step 2.1: Automatically connecting your
hood to your home network (Wi-Fi)
• Press SPEED 1 button.
• CONNECT and SPEED 1 buttons ash.
• WPS connection process started.
A. Note: To connect the hood to your home network,
the hood and the light must be switched off.
You can cancel the process at any time by pressing
“0”.
B. Press and hold the “CONNECT” button until “0”
and “CONNECT” start ashing.
C. Press “1”.
Note: “1” and “CONNECT” will ash.
D. If you have WPS (see previous page) press the WPS
button on your router.
Note: Please consult your router’s manual to locate
the WPS button.
E. When “CONNECT” and “3” ashes your appliance
is connected to the home network.
Go on to step 3.
Error: If the “CONNECT” and “2” light ashes then the
hood could not establish a connection with your home
Wi-Fi within 2 minutes.
Fix: Check whether your hood is in range of your Wi-Fi
and repeat the process. If unsuccessful, refer to step 2.2
to connect the oven manually.
Step 2.2: Manually connecting your hood
to your home network (Wi-Fi)
A. Note: To connect the hood to your home network, the
hood and the light must be switched off.
You can cancel the process at any time by pressing “0”.
B. Press and hold the “CONNECT” button until it start
ashing.
C. Press “2”.
Note: “2” and “CONNECT” will start ashing.
D. Open general settings on your mobile device and then
open Wi-Fi settings. Connect to the network named
“HomeConnect”.
This is your hoods Wi-Fi-network.
Use the following
login information to connect:
Wi-Fi-Name/SSID: HomeConnect
Password/Key: HomeConnect
E. Open the Home Connect™ App on your mobile device.
F. The app will prompt you to enter your home Wi-Fi’s
network name and password.
Note: The app may take a few minutes to nd your
hood.
G. Next, follow directions in the App.
H. When “CONNECT” and Fan Setting “3” ashes your
appliance is connected to the home network.
Go on to step 3.
Error: The appliance fails to connect to the app (The
“CONNECT” light will turn off).
Fix: Ensure your smartphone or tablet is connected to
the same home network (Wi-Fi). Check that your wire-
less connection is stable and has a strong signal. Then
repeat the process from step 2.
Use and Care GuideEnglish | 14 |
Connecting your hood to another Home
Connect
™
account
A. Open general settings on your mobile device and then
open Wi-Fi settings. Connect to the same home
network (Wi-Fi) as the hood.
B. Press and hold the “CONNECT” button until the
“CONNECT” and 3 buttons start ashing.
C. Open the app on your mobile device and follow the
instructions.
D. The registration process is complete once “CONNECT”
stops ashing on the hood.
If you want to change the wireless home network that
is connected to the hood, reset the connection to your
hood by:
A. Press and hold the “CONNECT” and fan setting “0”
buttons on your hood for at least 3 seconds. The
“CONNECT” button will turn off.
B. Repeat the process from step 2.
Software update
Using the software update function, your hood’s softwa-
re can be updated (e.g. for the purpose of optimization,
troubleshooting or security updates). To do this, you need
to be a registered Home Connect™ user, have installed the
app on your mobile device and be connected to the Home
Connect™ server.
As soon as a software update is available, you will be infor-
med through the Home Connect™ app and will be able to
start the software update via the app.
Once the update has been successfully downloaded, you
can start installing it via the Home Connect™ app if you are
on your local area network.
The Home Connect™ app will inform you once installation
is complete.
Notes
• You can continue to use your hood as normal while
updates are downloading.
• Depending on your personal settings in the app,
software updates can also be set to download
automatically.
• We recommend that you install security updates as
soon as possible.
Resetting the connection
You can reset the connections you have saved on your
home network and on Home Connect™ at any time.
• Press and hold the 0 and CONNECT buttons at the
same time until the CONNECT symbol is no longer
illuminated.
About Data Protection
When your appliance is connected for the rst time to a
WLAN network, which is connected to the Internet, your
appliance transmits the following categories of data to the
Home Connect™ server (initial registration):
• Unique appliance identication (consisting of appliance
codes as well as the MAC address of the installed Wi-Fi
communication module).
• Security certicate of the Wi-Fi communication module
(to ensure a secure IT connection).
• The current software and hardware version of your
domestic appliance.
• Status of any previous resetting to factory settings.
This initial registration prepares the Home Connect™
functions for use and is only required when you want to use
these Home Connect™ functions for the rst time.
NOTE: Ensure that the Home Connect™ functions can be
used only in conjunction with the Home Connect™ app.
Information on data protection can be accessed in the
Home Connect™ app.
Use and Care Guide English | 15 |
Care and Cleaning
Grease Filters Cleaning
WARNING
Be sure the entire appliance (including the lters
and lights) has cooled and grease has solidied
before attempting to clean any part of the
appliance.
Your hood has removable aluminum mesh lters. They must
be cleaned when the FILTER light illuminates on the touch
panel or whenever they collect grease. When used over a
grill, wok or other high grease applications, more frequent
cleaning may be required.
The lters may be washed by hand or in the dishwasher.
Soak the ventilation lters in hot water using a mild deter-
gent. Rinse well and shake to dry.
Slight discoloration can occur when cleaning the lters in
a dishwasher. This has no inuence on the function of the
grease lters.
NOTE: Reverse the directions below to remove the lters.
Ensure lters are cool and grease has solidied before
removal.
NOTE: Do not use cooktop, rangetop, or range while hood
is disassembled.
To Install Filters:
• Remove the lter by pulling the spring release lter
latch and then pulling down the lter.
• Reinstall the lter by making sure the spring release
lter latch is toward the front. Insert aluminum lter
into upper track.
• Push in spring release lter latch.
• Push up on aluminum lter and release handle to latch
into place.
Access additional tips and tricks through the Home Con-
nect™ app.
Cleaning Chart
Anodized
Aluminum
Surfaces
Wash top and underside with hot sudsy
water.
Rinse and wipe dry or apply Fantastic®
or Formula 409
®
rst to a clean sponge
or paper towel and wipe clean. DO NOT
USE powdered cleaners or steel wool
pads.
Aluminum
Mesh Filters
Clean lters in the dishwasher or by
agitating in sudsy water. Ensure that
there is no soil trapped in the ne mesh.
Dry the lters before reinstalling them.
Plastic
surfaces
DO NOT REMOVE control buttons.
Wipe with a moist soapy sponge. Rinse
and dry.
Painted
surfaces
For general care, wipe the outside of the
hood with sudsy water or household
cleaners such as Fantastic or Formula
409, rinse well and dry with a clean soft
cloth to avoid water marks. DO NOT USE
powdered cleansers or steel wool pads.
Stainless
Steel
Surfaces
Wipe and dry stainless steel in the same
direction as the grain. Avoid using too
much pressure, which may mar the
surface. To remove nger prints and give
added shine, use cleaners such as
Stainless Steel Magic. Do not allow any
cleaning compounds to remain in contact
with stainless steel for extended periods.
Hood Surface Cleaning
• For general care, wipe the outside of the stainless
steel with mild, lukewarm, soapy water. Always wipe
and dry in the direction of the stainless steel grain.
Avoid using too much pressure, which may mar the
surface.
• DO NOT use abrasive products such as steel wool.
• DO NOT use cellulose sponges. Some sponges are
processed with salt and can cause corrosion by
leaving salt deposits on the metal.
• DO NOT allow any cleaning compounds to remain
in contact with stainless steel for extended periods.
• DO NOT USE CHLORINE-BASED CLEANERS.
• To remove ngerprints and produce added shine, use
a stainless steel cleaner or conditioner. The
THERMADOR Stainless Steel Conditioner can be
purchased online (US only) at:
www.store.thermador.com (order part number
00576697).
Use and Care GuideEnglish | 16 |
Problem Suggested Solution
Noise during operation Some noise is normal due to vibration and air movement.
Excessive noise could indicate one of the following:
a) Ductwork is too small / undersized
b) Ductwork is too large / oversized
c) Ductwork is loose
d) Transition is too small or is loose
e) Wood screws are not fully tightened
f) Loose screws in trim parts, etc.
Check Installation Manual to verify that ductwork is the proper size. Tighten
screws.
Noise when unit is off a) Backow ap on outside of duct wall cap moves with the wind. This is
normal.
Lights and fan blower do not
work
a) Hood circuit breaker may be tripped. Reset breaker.
Fan blower does not work a) Power supply is insufcient.
b) Electrical wiring is incorrectly connected.
See the Installation Manual for more information.
Hood trips breaker a) Electrical wiring is incorrectly connected.
b) Circuit is not sufcient.
See the Installation Manual for more information.
The hood is not venting
properly.
a) The hood may be too high from the cook top.
b) The hood may not be centered above the cook top.
c) Make up air not sufcient.
d) The wind from opened windows or opened doors in the surrounding area
is affecting the ventilation of the hood. Close all the windows and doors
to eliminate the outside air ow.
e) Blockage in the duct opening or ductwork. Remove all blockage from the
duct-work or duct opening.
f) Duct length too long, too many elbows, “back to back” elbows, or too
small roof or wall cap, will all cause issues with air draw.
See the Installation Manual for more information.
Service
Before Calling Service
Trobuleshooting
To reach a service representative, see the contact informa-
tion at the back of the manual. Before calling, please note
the complete model and serial number printed on your
product data rating label.
Use the suggestions in the table below before calling for
service to avoid service charges.
Use and Care Guide English | 17 |
How to Obtain Service or Parts
We want you to remain a satised customer. If a problem
comes up that cannot be resolved to your satisfaction plea-
se let us know.
To reach a service representative, see the contact informa-
tion at the back page of the manual. Whether you write
or call, please provide us with the Model Number, Serial
Number and Date of Original Purchase or Installation.
Product Data Rating Label
The data rating label shows the model and serial number.
Refer to the data label on the appliance when requesting
service. The data rating label is located on the frame be-
hind the lter. The data rating label is located on the frame
behind the lters. Remove the perimetral plate and the
lters to view it.
Service Information
For handy reference, copy the information below from the
data rating label located on the frame. Keep your invoice
for Warranty validation.
Model Number _______________________________________
Serial Number________________________________________
Date of Purchase _____________________________________
Also enter this information on the Product Registration
Form included with this product.
Register your BSH product to ensure timely service and
access to your product related information. You may regis-
ter your product through one of the following ways:
1. Mail in the completed THERMADOR Product
Registration card.
2. Register your product online at www.thermador.com.
3. Call us at THERMADOR customer service at
1-800-735-4328.
Use and Care GuideEnglish | 18 |
Statement of Limited Product Warranty
What this Warranty Covers & Who it
Applies to
The limited warranty provided by BSH Home Appliances
Corporation (BSH) in this Statement of Limited Product
Warranty applies only to the THERMADOR
®
appliance sold
to you, the rst using purchaser, provided that the Product
was purchased:
• For your normal, household (non-commercial) use, and
has in fact at all times only been used for normal hous
hold purposes.
• New at retail (not a display, “as is”, or previously
returned model), and not for resale, or commercial
use.
• Within the United States or Canada, and has at all
times remained within the country of original purchase.
The warranties stated herein apply to the original purchaser
of the product warranted herein and to each succeeding
owner of the product purchased for ordinary home use
during the term of the warranty.
Please make sure to return your registration card; while not
necessary to effectuate warranty coverage, it is the best
way for BSH to notify you in the unlikely event of a safety
notice or product recall.
How Long the Warranty Lasts
Product built preceding January 1, 2012 with a number of
FD911299999 or lower: BSH warrants that the Product is
free from defects in materials and workmanship for a period
of three hundred and sixtyve (365) days from the date of
purchase. The foregoing timeline begins to run upon the
date of purchase, and shall not be stalled, tolled, extended,
or suspended, for any reason whatsoever.
Product built subsequent to January 1, 2012 with a number
of FD920100000 or higher: BSH warrants that the Product
is free from defects in materials and workmanship for a
period of seven hundred and thirty (730) days from the date
of purchase. The foregoing timeline begins to run upon the
date of purchase, and shall not be stalled, tolled, extended,
or suspended, for any reason whatsoever.
This Product is also warranted to be free from cosmetic
defects in material and workmanship (such as scratches of
stainless steel, paint/porcelain blemishes, chips, dents, or
other damage) to the nish of the Product, for a period of
sixty (60) days from the date of purchase or closing date for
new construction. This cosmetic warranty excludes slight
color variations due to inherent differences in painted and
porcelain parts, as well as differences caused by kitchen
lighting, product location, or other similar factors. This cos-
metic warranty specically excludes any display, oor, “As
Is”, or “B” stock appliances.
Repair/Replace as Your Exclusive Remedy
During this warranty period, BSH or one of its authorized
service providers will repair your Product without charge
to you (subject to certain limitations stated herein) if your
Product proves to have been manufactured with a defect in
materials or workmanship. If reasonable attempts to repair
the Product have been made without success, then BSH will
replace your Product (upgraded models may be availa-
ble to you, in the sole discretion of BSH, for an additional
charge). All removed parts and components shall become
the property of BSH at its sole option. All replaced and/or
repaired parts shall assume the identity of the original part
for purposes of this warranty and this warranty shall not be
extended with respect to such parts. BSH’s sole liability and
responsibility hereunder is to repair manufacturer-defecti-
ve Product only, using a BSH-authorized service provider
during normal business hours. For safety and property
damage concerns, BSH highly recommends that you do not
attempt to repair the Product yourself, or use an un-autho-
rized servicer; BSH will have no responsibility or liability for
repairs or work performed by a non-authorized servicer. If
you choose to have someone other than an authorize servi-
ce provider work on your Product, THIS WARRANTY WILL
AUTOMATICALLY BECOME NULL AND VOID. Authorized
service providers are those persons or companies that have
been specially trained on BSH products, and who possess,
in BSH’s opinion, a superior reputation for customer service
and technical ability (note that they are independent enti-
ties and are not agents, partners, afliates or representati-
ves of BSH). Notwithstanding the foregoing, BSH will not
incur any liability, or have responsibility, for the Product if
it is located in a remote area (more than 100 miles from an
authorized service provider) or is reasonably inaccessible,
hazardous, threatening, or treacherous locale, surroundings,
or environment; in any such event, if you request, BSH
would still pay for labor and parts and ship the parts to the
nearest authorized service provider, but you would still be
fully liable and responsible for any travel time or other spe-
cial charges by the service company, assuming they agree
to make the service call.
Use and Care Guide English | 19 |
Out of Warranty Product
BSH is under no obligation, at law or otherwise, to provide
you with any concessions, including repairs, pro-rates, or
Product replacement, once this warranty has expired.
Warranty Exclusions
The warranty coverage described herein excludes all de-
fects or damage that are not the direct fault of BSH, inclu-
ding without limitation, one or more of the following:
• Use of the Product in anything other than its normal,
customary and intended manner (including without
limitation, any form of commercial use, use or storage
of an indoor product outdoors, use of the Product in
conjunction with air or water-going vessels).
• Any party’s willful misconduct, negligence, misuse,
abuse, accidents, neglect, improper operation, failure
to maintain, improper or negligent installation,
tampering, failure to follow operating instructions,
mishandling, unauthorized service (including self-pe
formed “xing” or exploration of the appliance’s
internal workings).
• Adjustment, alteration or modication of any kind.
• A failure to comply with any applicable state, local,
city, or county electrical, plumbing and/or building
codes, regulations, or laws, including failure to install
the product in strict conformity with local re and
building codes and regulations.
• Ordinary wear and tear, spills of food, liquid, grease
accumulations, or other substances that accumulate
on, in, or around the Product.
• Any external, elemental and/or environmental forces
and factors, including without limitation, rain, wind,
sand, oods, res, mud slides, freezing temperatures,
excessive moisture or extended exposure to humidity,
lightning, power surges, structural failures surrounding
the appliance, and acts of God.
• In no event shall BSH have any liability or responsibility
whatsoever for damage to surrounding property,
including cabinetry, oors, ceilings, and other structures
or objects around the Product. Also excluded from this
warranty are products on which the serial numbers have
been altered, defaced, or removed; service visits to
teach you how to use the Product, or visits where there
is nothing wrong with the Product; correction of
installation problems (you are solely responsible for any
structure and setting for the Product, including all
electrical, plumbing or other connecting facilities, for
proper foundation/ooring, and for any alterations
including without limitation cabinetry, walls, oors,
shelving, etc.); and resetting of breakers or fuses.
TO THE EXTENT ALLOWED BY LAW, THIS WARRANTY
SETS OUT YOUR EXCLUSIVE REMEDIES WITH RESPECT
TO PRODUCT, WHETHER THE CLAIM ARISES IN CON-
TRACT OR TORT (INCLUDING STRICT LIABILITY, OR NE-
GLIGENCE) OR OTHERWISE. THIS WARRANTY IS IN LIEU
OF ALL OTHER WARRANTIES, WHETHER EXPRESS OR IM-
PLIED. ANY WARRANTY IMPLIED BY LAW, WHETHER FOR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PUR-
POSE, OR OTHERWISE, SHALL BE EFFECTIVE ONLY FOR
THE PERIOD THAT THIS EXPRESS LIMITED WARRANTY IS
EFFECTIVE. IN NO EVENT WILL THE MANUFACTURER BE
LIABLE FOR CONSEQUENTIAL, SPECIAL, INCIDENTAL,
INDIRECT, “BUSINESS LOSS”, AND/OR PUNITIVE DA-
MAGES, LOSSES, OR EXPENSES, INCLUDING WITHOUT
LIMITATION TIME AWAY FROM WORK, HOTELS AND/
OR RESTAURANT MEALS, REMODELLING EXPENSES IN
EXCESS OF DIRECT DAMAGES WHICH ARE DEFINITIVELY
CAUSED EXCLUSIVELY BY BSH, OR OTHERWISE. SOME
STATES DO NOT ALLOW THE EXCLUSION OR LIMITA-
TION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
AND SOME STATES DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATIONS MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND-
YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE.
No attempt to alter, modify or amend this warranty shall be
effective unless authorized in writing by an ofcer of BSH.
Guide d’Utilisation et d’EntretienFrançais | 20 |
Mode d’emploi de Home Connect
Module Wi-Fi
®
FCC/IC
Déclarations
No ID CMIIT (Chine): 2017AJ4134 (M)
FCC: 2AHES-COM2
IC: 21152-COM2
Le module Home Connect est un dispositif de communication
conçu pour permettre des échanges entre
les appareils électroménagers et les appareils intelligents.
Ce module est intégré en usine, sous le contrôle direct de BSH Home
Appliances Corporation, et ne peut pas être réparé ni mis à niveau par l’utilisateur.
Au moins 20 cm de distance doivent séparer l’utilisateur de l’appareil.
DÉCLARATION DE CONFORMITÉ DE LA FCC
MISE EN GARDE : Tout changement ou toute modification n’ayant pas fait l’objet d’une autorisation
expresse peut entraîner l’annulation du droit d’utilisation de l’équipement.
Ce dispositif est conforme à la section 15 de la réglementation de la FCC.
Le fonctionnement est soumis aux deux conditions qui suivent:
(1) Cet appareil ne doit pas générer d’interférence et (2) doit accepter toute interférence reçue, notam-
ment celle pouvant entraîner un mauvais fonctionnement.
DÉCLARATION D’INDUSTRIE CANADA
Cet appareil est conforme à la norme ou aux normes RSS sous exemption de licence d’Industrie Canada.
Le fonctionnement est soumis aux deux conditions qui suivent : (1) cet appareil ne doit pas générer
d’interférence et (2) doit accepter toute interférence reçue, notamment celle pouvant entraîner un
mauvais fonctionnement dudit appareil
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
dans d''autres langues
- English: Thermador HMIB36WS User manual
- español: Thermador HMIB36WS Manual de usuario
Documents connexes
-
Thermador HMIB42WS Mode d'emploi
-
Thermador HDDB30WS Mode d'emploi
-
Thermador HMDW36WS Le manuel du propriétaire
-
-
Thermador HMCB36WS Mode d'emploi
-
Thermador HDDB36WS Mode d'emploi
-
-
Thermador HMWB30WS Mode d'emploi
-
-
Thermador Professional Series Mode d'emploi