Samsung UA40D5800VW Manuel utilisateur

LED TV

User Manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model _____________ Serial No. _____________

E-MANUAL

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

Customer Care Centre

Web Site

NIGERIA 0800-SAMSUNG(726-7864) www.samsung.com

SOUTH AFRICA 0860-SAMSUNG(726-7864 ) www.samsung.com

BN68-03731F

BN68-03731F-00

[UD5800-SH]BN68-03731F.indb 1 2011-06-02 �� 9:19:29

English - 2

For more information on how to use e-Manual. (P. 13)

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

Product design and speciﬁcations may be changed without notice.

Important Warranty Information Regarding Television Format Viewing

1. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial

signals are broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check

with your local dealer the possibility to receive DVB-T or DVB-C signal.

2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast

transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so

on, are not included in this speciﬁcation. So, they cannot be workable at this moment.

3. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial

and DVB-C digital cable broadcasts cannot be guaranteed.

4. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and

you may be required to agree to terms and conditions of their business.

5. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service

providers.

6. For more information, please contact your local Samsung customer care centre.

✎

The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV

performance in the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconﬁguring TV

setting or not.

Still image warning

Avoid displaying still images (like jpeg picture ﬁles) or still image element (like TV programme logo, panorama or 4:3 image format, stock or news

bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LED screen, which will affect image quality. To

reduce risk of this effect, please follow below recommendations:

• Avoid displaying the same TV channel for long periods.

• Always try do display any image on full screen, use TV set picture format menu for best possible match.

• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout

process.

• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.

Failing to do so may result in ﬁre or a problem with the product due to an increase in the internal temperature of the product.

✎

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

• If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

✎

The appearance may differ depending on the product.

✎

Be careful when you contact the TV because some parts can be somewhat hot.

Installation with a stand. Installation with a wall-mount.

10 cm10 cm

10 cm

[UD5800-SH]BN68-03731F.indb 2 2011-06-02 �� 9:19:30

English - 3

Accessories

✎

Please make sure the following items are included with your TV. If any items are missing, contact your dealer.

✎

The items’ colours and shapes may vary depending on the models.

✎

Cables not included in the package contents can be purchased separately.

CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET

y Remote Control & Batteries (AAA x 2)

y Owner’s Instructions

y Warranty Card / Safety Guide (Not available in some locations)

y Power Cord

y Cleaning Cloth

y Holder Ring (4EA) y Holder-Wire Stand y CI Card Adapter

y Component / AV Adapter y Scart Adapter

✎

An administration fee may be charged if either

(a) an engineer is called out at your request and there is no defect in the product

(i.e. where you have failed to read this user manual)

(b) you bring the unit to a repair centre and there is no defect in the product

(i.e. where you have failed to read this user manual).

✎

The amount of such administration charge will be advised to you before any work or home visit is carried out.

Assembling the Holder-Wire stand

[UD5800-SH]BN68-03731F.indb 3 2011-06-02 �� 9:19:32

English - 4

Viewing the Control Panel

✎

The product colour and shape may vary depending on the model.

Control Panel (TV Rear)

Remote control sensor It is operating when pressing the buttons on remote control in the direction of the

remote control sensor of TV.

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.

SOURCE

E

Toggles between all the available input sources. In the on-screen menu, use this

button as you would use the ENTERE button on the remote control.

MENU Displays an on-screen menu, the OSD (on screen display) of your TV’s features.

Y

Adjusts the volume. In the OSD, use the Y buttons as you would use the ◄

and ► buttons on the remote control.

z

Changes the channels. In the OSD, use the z buttons as you would use the

▼ and ▲ buttons on the remote control.

P

(Power)

Turns the TV on or off.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount

of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

[UD5800-SH]BN68-03731F.indb 4 2011-06-02 �� 9:19:32

English - 5

Viewing the Remote Control

✎

This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel, and

Volume buttons.

Installing batteries (Battery size: AAA)

A B C D

P.MODE SRS

E-MANUAL AD/SUBT.

CONTENT

DUAL I-II

HDMI

Turns the TV on and off.

Displays and selects the available video

sources.

Selects the HDMI mode directly.

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Displays channel lists on the screen.

Displays the EPG (Electronic Programme

Guide).

Displays information on the TV screen.

Exits the menu.

Press to directly access to channels.

Adjusts the volume.

Alternately select Teletext ON, Double,

Mix or OFF.

Displays the main on-screen menu.

Quickly select frequently used functions.

Displays the My Downloads, Watch TV

and Source.

Returns to the previous menu.

Selects the on-screen menu items and

changes the values seen on the menu.

Buttons used in the Channel List,

Channel Manager, My Downloads,

Network, AllShare™ menu, etc.

Use these buttons in a speciﬁc feature.

For details, refer to the e-Manual.

P.MODE: Selects picture mode.

SRS: Selects the TruSurround HD mode.

DUAL I-II: Select Dual sound mode.

E-MANUAL: Displays the e-Manual

guide.

P.SIZE: Selects the picture size.

AD: Audio Description selection. (Not

available in some locations)

SUBT.: Displays digital subtitles.

[UD5800-SH]BN68-03731F.indb 5 2011-06-02 �� 9:19:34

English - 6

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.

✎

Preset: Connecting the mains and antenna.

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in conﬁguring basic settings. Press the

POWER

P

button. Plug & Play is available only when the Input source is set to TV.

✎

To return to the previous step, press the Red button.

1

Selecting a language

Press the ▲ or ▼ button, then press the ENTER

E

button.

Select the desired OSD (On Screen Display) language.

P

POWER

2

Selecting Store Demo or

Home Use

Press the ◄ or ► button, then press the ENTER

E

button.

Select the Home Use mode. Store Demo mode is for retail environments.

To return the unit’s settings from Store Demo to Home Use (standard):

Press the volume button on the TV. When the OSD volume is displayed,

press and hold MENU for 5 sec.

Store Demo is only for shop display. If you select it, several functions are not

able to use. Please select Home Use when you watch at home.

3

Setting the Clock Mode Set the Clock Mode automatically or manually.

4

Time Zone

Press the ▲ or ▼ button to select the your time zone, then press the ENTER

E

button.

(depending on the country)

5

Selecting an antenna

Press the ▲ or ▼ button, then press the ENTER

E

button.

Select the desired broadcasting signal.

6

Selecting a channel

Press the ▲ or ▼ button, then press the ENTER

E

button.

Select the channel source to memorise. When setting the antenna source to Cable, a step

appears allowing you to assign numerical values (channel frequencies) to the channels. For more

information, refer to Channel → Auto Tuning.

✎

Some channel may not be transmitted to this television. It depends on Broadcasting

signal gain or specification.

✎

Press the ENTER

E

button at any time to interrupt the memorisation process.

7

Enjoy your TV.

Select the Watch TV. Press the ENTER

E

button.

✎

If you select the Network Settings, set the network. For more information, refer to

“Network menu” in the e-Manual.

If You Want to Reset This Feature...

Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to

change the PIN number, use the Change PIN function.

You should do Plug & Play (MENU → System) again at home although you did in shop.

✎

If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets

the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).

VHF/UHF Antenna Cable

or

TV Rear Panel

[UD5800-SH]BN68-03731F.indb 6 2011-06-02 �� 9:19:35

English - 7

Connecting to an AV devices

¦ Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite

receiver, VCR, Digital Audio System, Ampliﬁer, DVD Home Theatre, PC

HDMI OUT

DVI OUT

AUDIO OUT

R-AUDIO-L

HDMI, HDMI/DVI connection

Using an HDMI cable or HDMI to DVI Cable (up to 1080p)

✎

HDMI IN 1(DVI), 2, 3, 4, PC/DVI AUDIO IN

x

For better picture and audio quality, connect to a digital device using an HDMI cable.

x

An HDMI cable supports digital video and audio signals, and does not require an audio cable.

– To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables.

x

The picture may not display normally (if at all) or the audio may not work if an external device that uses an older

version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external

device about the HDMI version and, if out of date, request an upgrade.

x

Be sure to use an HDMI cable with a thickness of 14 mm or less.

x

Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may

occur.

x

A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the

ethernet function via HDMI.

[UD5800-SH]BN68-03731F.indb 7 2011-06-02 �� 9:19:36

English - 8

AUDIO OUT

R-AUDIO-L

VIDEO OUT

AUDIO OUT

R-AUDIO-L

P

R

P

B

Y

COMPONENT OUT

W

R

G

R

B

W

R

G

R

B

R

W

R

W

EXT

Y

Component connection

AV connection

SCART connection

Using a Component (up to 1080p) or Audio/Video (480i only) and Scart Cable

✎

In Ext. mode, DTV Out supports MPEG SD Video and Audio only.

✎

To obtain the best picture quality, the Component connection is recommended over the A/V connection.

[UD5800-SH]BN68-03731F.indb 8 2011-06-02 �� 9:19:37

English - 9

Connecting to a PC and Audio device

¦ Available devices: Digital Audio System, Ampliﬁer, DVD Home Theatre

OPTICAL

Audio connection

Headphones connection

Using an Optical (Digital) Cable or Headphone Connection

✎

DIGITAL AUDIO OUT (OPTICAL)

x

When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of

both the TV and the system.

x

5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

x

When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the TV

is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital

component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to

the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio,

connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an

amplifier or home theatre.

✎

Headphones

H

: You can connect your headphones to the headphones output on your set. While the headphones

are connected, the sound from the built-in speakers will be disabled.

x

Sound function may be restricted when connecting headphones to the TV.

x

Headphone volume and TV volume are adjusted separately.

[UD5800-SH]BN68-03731F.indb 9 2011-06-02 �� 9:19:39

English - 10

Display Modes (D-Sub and HDMI/DVI Input)

Optimal resolution is 1920 X 1080 @ 60 Hz.

Mode Resolution

Horizontal Frequency

(KHz)

Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V)

IBM

640 x 350 31.469 70.086 25.175 +/-

720 x 400 31.469 70.087 28.322 -/+

MAC

640 x 480 35.000 66.667 30.240 -/-

832 x 624 49.726 74.551 57.284 -/-

1152 x 870 68.681 75.062 100.000 -/-

VESA DMT

640 x 480 31.469 59.940 25.175 -/-

640 x 480 37.861 72.809 31.500 -/-

640 x 480 37.500 75.000 31.500 -/-

800 x 600 37.879 60.317 40.000 +/+

800 x 600 48.077 72.188 50.000 +/+

800 x 600 46.875 75.000 49.500 +/+

1024 x 768 48.363 60.004 65.000 -/-

1024 x 768 56.476 70.069 75.000 -/-

1024 x 768 60.023 75.029 78.750 +/+

1152 x 864 67.500 75.000 108.000 +/+

1280 x 1024 63.981 60.020 108.000 +/+

1280 x 1024 79.976 75.025 135.000 +/+

1280 x 800 49.702 59.810 83.500 -/+

1280 x 800 62.795 74.934 106.500 -/+

1280 x 960 60.000 60.000 108.000 +/+

1360 x 768 47.712 60.015 85.500 +/+

1440 x 900 55.935 59.887 106.500 -/+

1440 x 900 70.635 74.984 136.750 -/+

1680 x 1050 65.290 59.954 146.250 -/+

VESA DMT / DTV

CEA

1920 x 1080p 67.500 60.000 148.500 +/+

✎✎

NOTE

x

For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.

x

The interlace mode is not supported.

x

The set might operate abnormally if a non-standard video format is selected.

x

Separate and Composite modes are supported. SOG(Sync On Green) is not supported.

¦ Using an HDMI cable or HDMI to DVI Cable / a D-sub Cable

✎

Connecting through the HDMI cable may not be supported depending on the PC.

✎

An HDMI cable supports digital video and audio signals, and does not require an audio cable.

AUDIO OUT

DVI OUT

PC OUT

HDMI OUT

PC connection

[UD5800-SH]BN68-03731F.indb 10 2011-06-02 �� 9:19:41

English - 11

Changing the Input Source

¦ Source List

Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver

connected to the TV.

■ TV / Ext. / PC / AV / Component / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB / AllShare

✎

In the Source List, connected inputs will be highlighted.

✎

If you want to see connected devices only, move to Connected using ◄ or ► button.

✎

Ext. and PC always stay activated.

✎

If the connected external devices are not highlighted, press the red button. The TV will search for connected

devices.

How to use Edit Name

In the Source, press the TOOLS button, and then you can set an external input sources name you want.

■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray /

HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier.

✎

When connecting a PC to the HDMI IN 1(DVI) port with HDMI cable, you should set the TV to PC mode under Edit Name.

✎

When connecting a PC to the HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI PC mode under Edit Name.

✎

When connecting an AV devices to the HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI Devices mode under

Edit Name.

Information

You can see detailed information about the selected external device.

✎

For best cable connection to this product, be sure to use cables with a maximum thickness as below:

x

Maximum thickness - 0.55 inches (14mm)

Connecting to a COMMON INTERFACE slot

Attaching the CI Card Adaptor

Attach the adapter as shown in the right.

To connect the CI CARD Adapter, follow these steps.

✎

Make sure that you attach the adaptor before you mount the TV on a wall.

1. Insert the CI CARD Adapter into the two holes on the product 1.

✎

Please find the two holes on the rear of the TV. The two holes are beside the COMMON

INTERFACE port.

✎

Press it firmly at center of adapter to ensure it is fully lock.

2. Connect the CI CARD Adapter into the COMMON INTERFACE port.

3. Insert the “CI or CI+ CARD”.

Using the “CI or CI+ CARD”

To watch paid channels, the “CI or CI+ CARD” must be inserted.

y If you do not insert the “CI or CI+ CARD,” some channels will display the message “Scrambled

Signal”.

y The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other

information will be displayed in about 2~3 minutes. If an error message is displayed, please contact

your service provider.

y When the conﬁguration of channel information has ﬁnished, the message “Updating Completed” is

displayed, indicating the channel list is updated.

✎

NOTE

x

You must obtain a “CI or CI+ CARD” from a local cable service provider.

x

When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage

to it.

x

Insert the “CI or CI+ CARD” in the direction marked on the card.

x

The location of the COMMON INTERFACE slot may be different depending on the model.

x

“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.

x

If you have any problems, please contact a service provider.

x

Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen.

[UD5800-SH]BN68-03731F.indb 11 2011-06-02 �� 9:19:43

English - 12

Network Connection

Network Connection - Wireless

You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must ﬁrst

attach a “Samsung Wireless LAN Adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN - sold separately) to either the USB 1

(HDD) or USB 2 port on the side of your TV. See the illustration below.

The LAN Port on the Wall

LAN Cable

Wireless IP sharer

(wireless router having

DHCP server)

Samsung Wireless

LAN Adapter

TV Side Panel

Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers and Ecommerce sites. Samsung’s

Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE

802.11n. When you play video over a network connection, the video may not be played smoothly.

Most wireless network systems incorporate a security system that requires devices that access the network through an access

point or wireless router (typically a wireless IP Sharer) to transmit an encrypted security code called an access key.

If Pure High-throughput (Greenﬁeld) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP AES

(WPS2Mixed) for your wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi certiﬁcation

speciﬁcations.

Network Connection - Wired

There are two main ways to connect your TV to your network using cable, depending on your network setup. They are

illustrated below:

The Modem Port on the Wall

TV Rear Panel

LAN CableModem Cable

External Modem

(ADSL / VDSL / Cable TV)

The LAN Port on the Wall

TV Rear Panel

LAN Cable

✎

A network speed of lower than 10 Mbps is not supported.

[UD5800-SH]BN68-03731F.indb 12 2011-06-02 �� 9:19:45

English - 13

How to view the e-Manual

Screen Display

1

4 5 6

2

3

Basic Features

Picture Menu

Sound Menu

}

Index

E

Enter

e

Exit

1 Currently displayed video, TV Programme, etc.

2 The category list. Press ◄ or ► button to select

category you want.

3 Displays the sub-menu list. Use the arrow buttons on

your remote to move the cursor. Press ENTER

E

button to select the sub-menu you want.

4 } Blue (Index): Displays the index screen.

5 E Enter: Selects a category or sub-menu.

6 e Exit: Exit the e-Manual.

How to toggle between an e-Manual topic and the corresponding OSD menu(s).

Picture

Picture Mode : Standard ►

Backlight : 7

Contrast : 95

Brightness : 45

Sharpness : 50

Colour : 50

Tint (G/R) : G50/R50

Screen Adjustment

E-MANUAL

a

Try Now

Basic Features > Picture Menu (3/17)

a

Try Now

b

Home

{

Zoom

}

Index

L

Page

e

Exit

✎

This function is not enabled in some menus.

Method 1 Method 2

1. If you want to use the menu that corresponds to an

e-Manual topic, press the red button to select Try Now.

2. To return to the e-Manual screen, press the E-MANUAL

button.

1. Press the ENTER

E

button when a topic is displayed.

“Are you sure?” appears. Select Yes, and then press the

ENTER

E

button. The OSD window appears.

2. To return to the e-Manual screen, press the E-MANUAL

button.

E-MANUAL

You can ﬁnd instructions about your TV’s features in the e-Manual in your TV. To

use, press the E-MANUAL button on your remote. Move the cursor using the up/

down/right/left buttons to highlight a category, then a topic, and then press the

ENTER

E

button. The e-Manual displays the page you want to see.

You can also access it through the menu:

O

MENU

m

→ Support → e-Manual → ENTER

E

✎

To return to the e-Manual main menu, press the E-MANUAL button on the remote.

✎

You cannot use Try Now directly if the TV is set to an external input source.

[UD5800-SH]BN68-03731F.indb 13 2011-06-02 �� 9:19:48

English - 14

Viewing the Contents

Basic Features > Picture Menu (3/17)

2 3 4 5

a

Try Now

b

Home

{

Zoom

}

Index

L

Page

e

Exit

1

1 Contents Area: Contains the topic contents, if you

selected a sub-menu. To move previous or next

page, press the ◄ / ► button.

2 Try Now: Displays the OSD menu that corresponds

to the topic. To return to the e-Manual screen, press

the E-MANUAL button.

3 Home: Moves to the e-Manual home screen.

4 Zoom: Magniﬁes a screen. You can scroll through the

magniﬁed screen by using ▲ / ▼ buttons.

5 L (Page): Moves to previous or next page.

Using the Zoom mode

U

Move

R

Return

Select the Zoom, and then press ENTER

E

to magnify

the screen. You can scroll through the magniﬁed screen

by using the ▲ or ▼ buttons.

✎

To return to the screen to normal size, press the

RETURN button.

How to search for a topic on the index page

✎

This function may not be supported depending on the language.

1. If you want to search a keyword, press the blue button to select Index.

2. Press the ◄ or ► button to select a character order you want.

3. Press the ▲ or ▼ button to select a keyword you want to see, and then press the ENTERE button.

4. You can view the corresponding e-Manual instruction screen.

✎

To close the Index screen, press the RETURN button.

[UD5800-SH]BN68-03731F.indb 14 2011-06-02 �� 9:19:52

English - 15

Installing the Wall Mount

The wall mount kit (sold separately) allows you to mount the TV on the wall.

For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for

assistance when installing the wall mount bracket.

Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the

TV on your own.

Wall Mount Kit Speciﬁcations (VESA)

Case A. Installing the SAMSUNG Wall-Mount Case B. Installing another company’s Wall-Mount

1

✎

Wall mount kit is not supplied but sold separately.

Install your wall mount on a solid wall perpendicular to the ﬂoor. When attaching to other building materials, please contact

your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.

✎

NOTE

x

Standard dimensions for wall mount kits are shown in the table below.

x

When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.

x

Do not use screws that do not comply with the VESA standard screw specifications.

x

Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set.

x

For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ

depending on their specifications.

x

Do not fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal

injury. Samsung is not liable for these kinds of accidents.

x

Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or

the consumer fails to follow the product installation instructions.

x

Do not exceed 15 degrees tilt when mounting this TV.

Product

Family

inches VESA Spec. (A * B)

Standard

Screw

Quantity

LED-TV

19~22 75 X 75

M4

4

27 200 X 100

32~40 200 X 200

M846~60 400 X 400

65~75 600 X 400

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric

shock.

[UD5800-SH]BN68-03731F.indb 15 2011-06-02 �� 9:19:53

English - 16

Troubleshooting

If the TV seems to have a problem, ﬁrst try this list of possible problems and solutions. If none of these troubleshooting tips

apply, visit “www.samsung.com”, then click on Support, or call Samsung customer service centre.

Issues Solutions and Explanations

The TV will not turn on. • Make sure the AC power cord is securely plugged in to the wall outlet and the TV.

• Make sure the wall outlet is working.

• Try pressing the POWER button on the TV to make sure the problem is not the remote. If

the TV turns on, refer to “Remote control does not work” below.

There is no picture/video. • Check cable connections (remove and reconnect all cables connected to the TV and

external devices).

• Set your external device’s (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match

the connections to the TV input. For example, if an external device’s output is HDMI, it

should be connected to an HDMI input on the TV.

• Make sure your connected devices are powered on.

• Be sure to select the TV’s correct source by pressing the SOURCE button on the remote

control.

• Reboot the connected device by reconnecting the device’s power cable.

The remote control does not work. • Replace the remote control batteries with the poles (+/–) in the right direction.

• Clean the sensor’s transmission window on the remote.

• Try pointing the remote directly at the TV from 5~6 feet away.

The cable/set top box remote control

doesn’t turn the TV on or off, or

adjust the volume.

• Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set

user manual for the SAMSUNG TV code.

✎

You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com -> Support ->

Downloads) by USB.

✎

This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However,

there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the

product.

Licence

List of Features

Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed without

a cable box / STB (Set-Top-Box) satellite receiver.

My Downloads

Allows you to play music ﬁles, pictures, and movies saved on a USB device.

AllShare™

AllShare™ connects your TV and compatible Samsung mobile phones/devices through a network.

Anynet+(HDMI-CEC)

Allows you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote.

[UD5800-SH]BN68-03731F.indb 16 2011-06-02 �� 9:19:54

English - 17

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your

children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious

injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install

the anti-fall device for safety purposes, as follows.

To avoid the TV from falling

1. Put the screws into the clamps and ﬁrmly fasten them onto the

wall. Conﬁrm that the screws have been ﬁrmly installed onto the

wall.

✎

You may need additional material such as an anchor

depending on the type of wall.

✎

Since the necessary clamps, screws, and string are not

supplied, please purchase these additionally.

2. Remove the screws from the centre back of the TV, put the

screws into the clamps, and then fasten the screws onto the TV

again.

✎

Screws may not be supplied with the product. In this case,

please purchase the screws of the following specifications.

✎

Screw Specifications

x

For a 32 ~ 75 inch LED TV: M8

3. Connect the clamps ﬁxed onto the TV and the clamps ﬁxed onto

the wall with a strong string and then tie the string tightly.

✎

NOTE

x

Install the TV near to the wall so that it does not fall backwards.

x

It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on

the TV.

x

Untie the string before moving the TV.

4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any

doubt about the security of your connections, contact a professional installer.

Storage and Maintenance

✎

If you remove the attached sticker on the TV screen, clean the residues and then watch TV.

Do not spray water or a cleaning agent directly onto the

product. Any liquid that goes into the product may cause a

failure, ﬁre, or electric shock.

Clean the product with a soft cloth dapped in a small amount

of water.

Wall

[UD5800-SH]BN68-03731F.indb 17 2011-06-02 �� 9:19:56

English - 18

Speciﬁcations

Display Resolution 1920 x 1080

Environmental Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

10°C to 40°C (50°F to 104°F)

10% to 80%, non-condensing

-20°C to 45°C (-4°F to 113°F)

5% to 95%, non-condensing

TV System Analogue: B/G, D/K, L, I

Digital: DVB-T/DVB-C

Colour/Video System Analogue: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60

Digital: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, [email protected], [email protected]

Sound System BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC

HDMI IN Video: 1080 24p, 1080p, 1080i, 720p, 576p, 480p

Audio: 2Ch Linear PCM 32/44.1/48kHz, 16/20/24bits.

Stand Swivel (Left / Right) -20˚ ~ 20˚

Model Name UA32D5800 UA40D5800

Screen Size 32 inches 40 inches

Sound

(Output) 10 W X 2

Dimensions (WxDxH)

Body

With stand

745.8 X 29.9 X 443.4 (mm)

745.8 X 241.3 X 518.0 (mm)

933.0 X 29.9 X 548.8 (mm)

933.0 X 241.3 X 622.2 (mm)

Weight

Without Stand

With Stand

6.7 kg

7.9 kg

10.7 kg

12.1 kg

✎

Design and specifications are subject to change without prior notice.

✎

For information about power supply, and more about power consumption, refer to the label attached to the product.

[UD5800-SH]BN68-03731F.indb 18 2011-06-02 �� 9:19:57

This page is intentionally

left blank.

[UD5800-SH]BN68-03731F.indb 19 2011-06-02 �� 9:19:57

Français - 2

Pour plus d'informations sur l'utilisation du manuel électronique (P.13)

Les ﬁgures et illustrations contenues dans ce mode d’emploi sont fournies pour référence uniquement. Elles peuvent différer

de l’aspect réel du produit. La conception et les spéciﬁcations du produit sont susceptibles d’être modiﬁées sans préavis.

Informations importantes relatives à la garantie de votre téléviseur (format d'afﬁchage)

1. Les fonctions relatives à la télévision numérique (DVB) ne sont disponibles que dans les pays ou régions où des signaux terrestres

numériques de type DVB-T (MPEG2 et MPEG4 AVC) sont diffusés ou dans lesquels vous avez accès à un service de télévision par câble

compatible DVB-C (MPEG2 et MPEG4 AAC). Consultez votre distributeur local pour connaître les possibilités en matière de réception des

signaux DVB-T ou DVB-C.

2. DVB-T est la norme du consortium européen DVB pour la diffusion de signaux terrestres de télévision numérique. La norme DVB-C est, quant à

elle, prévue pour la diffusion des signaux de télévision numérique par câble. Certaines fonctions particulières, telles que le guide électronique des

programmes (Electric Program Guide - EPG) ou encore la vidéo à la demande (Video On Demand - VOD), ne sont toutefois pas incluses dans cette

spéciﬁcation. Dès lors, elles ne seront pas traitées pour l’instant.

3. Bien que ce téléviseur soit conforme aux dernières normes DVB-T et DVB-C (août 2008), il n’est pas garanti qu’il soit compatible avec les

futures diffusions de signaux numériques terrestres DVB-T et par câble DVB-C.

4. En fonction du pays ou de la région où vous vous trouvez, certains opérateurs de télévision par câble peuvent facturer des frais

supplémentaires pour un tel service. Il se peut également que vous deviez accepter les termes et conditions de ces sociétés.

5. Il se peut que certaines fonctions de TV numérique ne soient pas disponibles dans certains pays ou certaines régions et que la réception des

signaux DVB-C ne soit pas correcte avec tous les opérateurs.

6. Pour plus d’informations, contactez votre service client Samsung.

✎

Les différentes méthodes de diffusion adoptées en fonction des pays peuvent affecter la qualité de réception du téléviseur. Vériﬁez le

fonctionnement du téléviseur chez votre revendeur agréé SAMSUNG ou contactez le centre d’appel de Samsung pour savoir s’il est

possible d’en améliorer les performances en reconﬁgurant les réglages.

Avertissement d’image ﬁxe

Evitez d'afﬁcher sur l'écran des images ﬁxes (telles que des photos au format JPEG) ou des éléments d'images ﬁxes (tels que des logos de

programmes TV, un format d'image 4:3 ou panoramique, des bandeaux d'actualités ou d'informations boursières au bas de l'écran, etc.).

L'afﬁchage permanent d'images ﬁxes risque, en effet, d'entraîner l'apparition d'images fantôme à l'écran, ce qui peut se traduire par une

dégradation de la qualité d'image. Pour atténuer les risques, suivez scrupuleusement les recommandations suivantes:

• Evitez d’afﬁcher le même canal de télévision pendant de longues périodes.

• Essayez toujours d’afﬁcher l’image en plein écran ; pour obtenir une correspondance optimale, utilisez le menu de format d’image du

téléviseur.

• Réduisez les valeurs de luminosité et de contraste sur le minimum requis pour obtenir la qualité d’image souhaitée. L’utilisation de valeurs trop

élevées risque d’accélérer le processus de brûlure.

• Utilisez fréquemment toutes les fonctions du téléviseur conçues pour réduire le phénomène de rémanence et la brûlure d’écran. Pour plus

d’informations à ce sujet, consultez la section appropriée du mode d’emploi.

Sécurisation de l’espace d’installation

Maintenez les distances requises entre le produit et les autres objets (par exemple, les murs) aﬁn de garantir une ventilation adaptée.

Le non-respect de ces distances peut provoquer un incendie ou un problème au produit en raison d’une augmentation de la température interne

de celui-ci.

✎

Lors de l’utilisation d’un pied ou d’un support mural, utilisez uniquement les pièces fournies par Samsung Electronics.

• L’utilisation de pièces fournies par un autre fabricant peut occasionner un problème au niveau du produit ou la chute de celui-ci, ce qui pourrait

vous blesser.

✎

L’aspect peut varier en fonction du produit.

✎

Soyez prudent lorsque vous touchez le téléviseur, car certaines parties peuvent être brûlantes.

Installation avec un pied. Installation avec un support de montage mural.

10 cm10 cm

10 cm

[UD5800-SH]BN68-03731F.indb 2 2011-06-02 �� 9:19:57

La page charge ...

Samsung UA40D5800VW Manuel utilisateur

Samsung UA40D5800VW Manuel utilisateur

dans d''autres langues

Documents connexes