Philips 28DW6559 Le manuel du propriétaire

ANALOGUE

MENUS

1

Introduction

Ta b le of Contents

Thank you for purchasing this television set.

This handbook has been designed to help you install and operate your TV set.

We would strongly recommend that you read it thoroughly.

We hope this new television meets entirely with your satisfaction.

Installing your television set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

The keys on the TV set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

The remote control keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Digital or Analogue channels ? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Switching on for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Understanding the information on the banner . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Rearrange services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

View or Listen to new TV services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Add new services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Reinstall all services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Test reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Language and location preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Access restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Setting up your favourite list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Information menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Downloading new software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Using the Options menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

TV guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Recording function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Automatic tuning of analogue programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Sorting analogue programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Manual tuning of analogue programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Naming analogue programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Picture settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Sound adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Feature settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Analogue Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Digital text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

16:9 Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Connecting peripheral equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

To select connected equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

VCR / DVD mode selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Centre Frequencies Table (in KHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

DIGITAL

MENUS

°

Recycling

The materials used in your set are either reusable or can be recycled.

To minimise environmental waste, specialist companies collect used appliances

and dismantle them after retrieving any materials that can be used again (ask

your dealer for further details).

English

The digital menus

of this product

use the latest

Java

™

technology

from Sun

Microsystems Inc.

FrançaisEspañolItalianoSvenskaSuomi

The television set has 4 keys which are

located on the front or the top of the set

depending on the model.

The VOLUME - + (-

” +) keys are used to

adjust sound levels.

The PROGRAM - + (- P +) keys are used to

select the required programmes.

To access the menus, simultaneously hold

down the

” - and ” + keys.The

PROGRAM - + keys may then be used to

select an adjustment and the -

” + keys to

make that adjustment.

To exit from the menus, hold down

the 2

” - and ” + keys.

PROGRAMVOLUME

--

++

2

&

Positioning the television set

Place your TV on a solid, stable surface, leaving

a space of at least 5 cm around the appliance.

To avoid accidents, do not put anything on the

set such as a cloth or cover, a container full of

liquid (vase) or a heat source (lamp).The set

must not be exposed to water.

é

Connections

• Insert the aerial plug into the : socket at

the rear of the set.

• Insert the mains plug into a wall socket (220-

240 V / 50 Hz).

“

Remote control

Insert the two R6-type batteries (supplied)

making sure that they are the right way round.

The batteries supplied with this appliance do not

contain mercury or nickel cadmium. If you have

access to a recycling facility, please use this facility

(if in doubt, consult your dealer).When the batteries

are replaced, use the same type.

‘

Switching on

To switch on the set, press the on/off key.

A red indicator comes on and the screen lights

up. Go straight to the chapter Switching on

for the first time, on page 4.

If the television remains in standby mode,

press P

# on the remote control.

The indicator will flash when you use the remote

control.

5 cm

Installing your television set

The keys on the TV set

3

12

BACK

VCR

DVD

MENU

OK

A/D

”

P(age)

564

879

0

·

∆

Ê Æ

¢

∫

†

Á

ª

-

3

-

++

.

DIGITAL

TV

[

OPTIONS

›Ó

¤Ÿ

Œ

Ë

MENU

SELECT

∏ù

SMART

Ø

MODE

CANCEL

The remote control keys

Screen information

In digital mode, press once to display the

information banner, a 2

nd

time to get

more information on the programme

and a 3rd time to remove it (see p. 4).

In analogue mode, this displays /

removes the programme

informations(number, name, sound

mode). Hold down for 5 seconds to

permanently display the analogue

programme number on the screen.

TV guide

(see p.9).

Select EXT sockets

(see p.16).

Mode selector

To activate the remote control in

VCR or DVD mode (see p. 17).

TV Menu

To display or exit from the analogues

menus

Select

In digital mode this displays / clears the

programme list.Use the

îÏ keys to

select a programme and

u to display it.

Volume

To adjust the sound level

16:9 formats (p. 15)

Mute

To disable or enable the sound.

Picture and sound settings

Accesses a series of picture and

sound settings.

The position Personal corresponds to the

settings stored in the menus.

Standby

To set the TV to standby mode.To

switch the TV set on again, press b,

P @#or 09.

Options menu

(see p.9).

Teletext features (p. 14)

and VCR/DVD keys (p.17).

Digital Menu

To display or exit from the digital

menus (when TV is in digital mode).

Analogue or Digital mode

To switch the television between

analogue and digital mode.

Cursor

These 4 keys are used to move

within the menus or to directly access

the 16:9 screen formats (p 15).

Previous programme

To access the previously viewed

programme.

Numerical keys

For direct access to programmes.For a

2 (3) digit programme number, the 2

nd

(3

rd

)digit must be entered before the

dash disappears.

The number, the name

(and the sound

mode, in analogue

mode) are displayed for a few seconds.

Sound mode

To switch from

Stereo to Mono or

to choose between different

languages (Dual I, Dual II, ...).

When the sound mode is switched to

Mono, the indication is displayed in red.

Surround sound

To activate / deactivate the Virtual

Dolby Surround * effect. In stereo,

you can obtain Dolby Surround

Pro Logic sound quality. In mono, a

stereo spatial effect is simulated.

*

Manufactured under license from Dolby

Laboratories. ”Dolby” ”Pro Logic” and the double-D

symbol are trademarks of Dolby Laboratories.

Programme selection

To access the next or previous

programme (or page in digital menus).

Subtitle mode

To activate/deactivate the subtitle mode

To receive TV channels, your television is equipped with 2 tuners. One is for digital channels, the other

is for analogue channels. Use the

v key of the remote control to switch the TV between analogue

and digital mode.Then use the

P @#or 09keys to select channels.

Digital or Analogue channels ?

4

The first time the TV set is switched on, a

congratulation message will appear on screen.

The language of which changes every 5 seconds.

If the menu is not displayed, press and hold down

the

”- and ”+ keys on the TV set for 5

seconds to display the menu.

&

Press the u key on the remote control, the

moment your prefered language is visible

on the screen.The

Setup

menu is displayed :

é The Language, corresponding Country and

Time zone is now preselected according to the

opening screen. However, you can still change

your preferences before you start a service scan.

“ With the cursor keys, select

Language,

Country or Time zone and check if the

adjustment is according to your preferences. If

necessary, use the cursor keys to make your

adjustment and press

u to exit.

Caution: if you select a wrong country, the channel

numbering will not be according to the standard

for your country.

‘ Select

Service Scan from the menu and

press

u to start the installation.The Service

Scan

menu is displayed.

All the digital and analogue programmes are

searched for and stored automatically.When

the search is complete, the menu will indicate

the number of digital services and analogues

programmes found.

( Press the

u key twice to start watching TV.

The television then displays the current

programme.The installation is now complete.

When you select a digital programme, an

information banner is displayed for a few

seconds at the top of the screen.

You can also use the

∂ key of the remote control

to display this banner.A second press displays more

information about the programme (when available).

The banner contains information on the

preset number, channel name, programme

duration, transmission clock, programme title

and the time remaining of the current

programme.

Switch on for the first time

Understanding the information on the banner

Banner description:

Congratulations for selecting this Philips television.

Press OK to start enjoying your digital television.

Setup

Set options and start a service scan

Language

Country

Time Zone

Service Scan

11:46

English

United Kingdom

(GMT) Lisbon, London

Please press OK to start

2 11:06 - 11:09

BBC2 Snooker

11:46

Minutes left : 14

u

ù

i

ß

preset

number

symbols

clock

programme

start and end

time

remaining time

of programme

programme titlechannel name

Symbols description :

i

more information about this programme is available :

press the ∂key to display or remove it.

ß subtitling is available : if you want to display

them, press the ß key or the

OPTIONS key to

access the

options menu and select subtitles.

ù other audio languages are availables and can be

selected in the

options menu.

u the selected Favourite list is displayed in the

colour of the activated list.

5

Rearrange services

This menu allows you to change the order of

the stored digital channels and radio stations.

& From the digital mode, press the

‹ MENU

key

to display the setup menu.

é Use the

Ï key to select installation and press

¬ twice to select the Service lists menu.

“ Use the

îÏ keys to select Rearrange

services

and press ¬.

‘ Use the

îÏ keys to select the channel you

want to exchange.

( Press

u to activate.

If you want to uninstall the selected channel, press

the red key.

§ Select (

îÏ) the new channel number you

want to exchange it with.

è Press

u to confirm.The exchange is done.

! Repeat the operations ‘ to è until all the

channels are in the required order.

ç Press the

‹ MENU

key to leave the menu.

This menu allows you to check the availability

of new TV channels or new radio stations that

have been launched by the broadcaster after

the initial installation.

& From the digital mode, press the

‹ MENU

key

to display the setup menu.

é Use the

Ï key to select installation and press

¬ twice to select the Service lists menu.

“ Use the

îÏ keys to select View new TV

channels

or Listen to new Radio station.

‘ If new services are availables, press

¬ to

enter into the list and use the îÏ keys to

move through the list.

( Press the

‹ MENU

key to leave the menu.

View or Listen to new services

Setup

Installation

Manage service lists

Close

Service lists

Service setup

Test reception

11:46

Rearrange services

View new TV channels

Listen to new Radio stations

Add new services

This menu allows you to search for new TV

channels or radio stations that have been launched

by the broadcaster after the initial installation.

& From the digital mode, press the

‹ MENU

key

to display the setup menu.

é Use the

Ï key to select installation and press

¬.

“ Select

Service setup (Ï) and press ¬.

‘ Press

¬ to select Add new services and

press

u to activate the installation.

The search begins and only new channels will

be stored and added to the

channel list menu.

The percentage of the installation that has

been completed and the number of channels

found is displayed.

( When the search is complete, select store and

press

u to accept the new services.

§ Press the

‹ MENU

key to leave the menu.

Setup

Installation

Install and manage services

Close

Service lists

Service setup

Test reception

11:46

Add new services

Reinstall all services

6

This menu allows you to reinstall all the digital

TV channels and radio stations.

& From the digital mode, press the

‹ MENU

key

to display the setup menu.

é Use the

Ï key to select installation and press

¬.

“ Select

Service setup (Ï) and press ¬.

‘ Select

Reinstall all services (Ï) and press ¬.

( Press

u to start the installation.

A search is then made for all digital services

which are then stored automatically.

When the search is completed, the menu will

indicate the number of digital services found.

§ When the search is complete, press

u to

store the services.

è Press the

‹ MENU

key to leave the menu.

This menu allows you to check the strengh of

the signal you are receiving through your aerial.

& From the digital mode, press the

‹ MENU

key

to display the setup menu.

é Use the

Ï key to select installation and press

¬ to display the installation menu.

“ Use

Ï to select Test reception and press ¬.

You obtain an indication of the actual

programme frequency, the network name, the

signal quality and strength.

‘ You now have to enter the frequency of the

digital channel you want to test.

Your Tv magazine can provide the list of digital

channel numbers. Use the table on page 18 to get

the frequency.

( If the signal quality and strength is poor, a

message appears at the bottom of the menu

prompting you to enter the frequency between

the lower and the higher limit. If after keying

the frequency, the reception is still poor, you

can try improving, renewing, adjusting or

updating the aerial. It is however advisable to

contact a specialised aerial installer in order to

achieve best results.

Reinstall all services

Test reception

Setup

Installation

Test signal quality

Close

Service lists

Service setup

Test reception

11:46

Frequency

Network name

Signal quality

Signal strength

Setup

Installation

Install and manage services

Close

Service lists

Service setup

Test reception

11:46

Add new services

Reinstall all services

7

Language and location preferences

This menu allows you to select your prefered

language for audio, subtitle, teletext and menu

and make changes to the location (country

and time zone).

& From the digital mode, press the

‹ MENU

key

to display the setup menu.

é Use the

Ï key to select preferences and

press

¬.

“ Select

Languages, Location or Digital Audio

Output

(Ï) and press ¬.

‘ Use the

Ïî keys to select a setting and

press

¬ to enter into the sub-menu. Make

your adjustment and press

u or È to exit.

Language default settings:

•

Audio: to select the audio sound language.

•

Subtitle/Teletext: to select the

subtitle/teletext language.

•

Subtitling mode: off, on or auto

(subtitle only

displayed in case of original audio transmission)

.

•

Subtitles for hearing impaired

: to activate or

deactivate the specific subtitle for hearing

impaired (if made available by the broadcaster).

• System: to select the menu language.

Location settings:

•

Country: to select the country where you are

located.

•

Time zone: to select the time zone where

you are located.

Digital Audio Output settings:

To select

AC3 (if the amplifier supports the

Dolby Digital format) or

PCM (if it doesn’t

support Dolby Digital format).

( Press the

‹ MENU

key to leave the menu.

This menu allows you to setup the access

restrictions of the digital channels.

& From the digital mode, press the

‹ MENU

key

to display the setup menu.

é Use the

Ï key to select Access restriction

and press ¬.

“ Press the

¬ key to enter into the Set pin

code protection

menu.

‘ Use the

È¬ keys to set to on and press

u to exit.You can then access the other

adjustments :

W

arning: the moment you use any kind of access

restriction, you need to fill in the pin code when you

schedule a program for recording.

•

Maturity rating: select your prefered rating to

lock the channel.

Maturity rating will only block certain programmes if

the broadcaster provides data with the programme.

•

TV channels: select the TV channel you want

to lock and press

u.

•

Radio station: select the radio station you

want to lock and press

u.

•

Change pin code:press ¬ to enter in the

menu. Follow the on-screen instruction to

change your access code.

The default pin code is 1234. If you have forgotten

your personal code, you can reset to the default pin

code (1234) by enter the universal code 0711.

( Press the

‹ MENU

key to leave the menu.

The TV is equipped with a Common Interface (CI)

slot (see p.17).A CI module can enable additional

services, for example Pay TV.The Access

Restrictions menu will show the CI Access

Restrictions when a CI module is installed.The CI

module is responsible for the messages and texts

on screen. In case of failure or strange behaviour,

you must call your CI service provider.

Access restrictions

Setup

Preferences

Select your prefered language

Close

Languages

Location

Digital Audio Output

11:46

Audio

Subtitle / Teletext

Subtitling mode

Subtitling for hearing impaired

System

Setup

Access restrictions

Switch pin code protection “on” or “off”

Close

Set pin code protection

Maturity rating

TV channels

Radio stations

Change pin code

11:46

On Off

8

Setting up your favourite list

This menu enables you to create a favourite

list with your prefered TV channels and radio

stations. For example, each member of your

family can create his/her own favourite list.

& From the digital mode, press the

‹ MENU

key

to display the setup menu.

é Press

¬ to enter into the favourites list

menu.You have the choice to create 4 different

favourite lists.

“ Use the

Ïî keys to select your favourite

list :

List 1, List 2, List 3 or List 4 and press ¬.

‘ Use the

Ïî keys to select a setting and

press

¬ to enter into the sub-menu.

•

Name: use the È¬ keys to move around

the name display area (16 characters) and the

@P# keys to select the characters.When

the name has been entered, press

u to exit.

•

Select TV channels: use the Ïî keys to

select your favourite TV channels and confirm

with

u.Press È to exit.

•

Select radio stations: use the Ïî keys to

select your favourite radio station and

confirm with

u.Press È to exit.

•

Add all services:press u if you want to add

all the service into your favourite list.

•

Remove all services:press u if you want to

remove all the service from your favourite list.

( Press the

‹ MENU

key to leave the menu.

§ Your favourite list can be selected using the

options menu (see next page).

This menu provides informations about the

software version and the installation of new

software.

& From the digital mode, press the

‹ MENU

key

to display the setup menu.

é Use the

Ï key to select information and

press

¬ twice.

The software version is displayed.

“ You can activate the menu to automatically

accept any software update of your digital TV.

Normally the product will detect if an update is

available while it is in standby mode. Next time

the television is turned on a banner will appear

at the bottom of the screen indicating new

software is available. Selecting

u

activates the

software download.The software download

menu will give a description of the software

together with the date and time of the

download.This may update certain menus,

functions or add new features, but the general

way in which the TV operate will not change.

Once accepted the download will take place at

the designated time and date.

Note

:The TV must be put into standby when the

download is due in order for it to take place.

‘ Press the

‹ MENU

key to leave the menu.

Information

Downloading new software

Setup

Make changes to your lists of favourite services

Close

Favourites

Preferences

Information

Access restrictions

Installation

11:46

List 1

List 2

List 3

List 4

Setup

Provides information on problem reports and ...

Close

Favourites

Preferences

Information

Access restrictions

Installation

11:46

System software

Whenever a new software is available, it is advisable to always accept and download the software.

In case new software is available, you will see a message when you switch on the TV.

9

Using the Options menu

This menu gives you direct access to the:

favourite list, the language selection and some

other selections.

& From the digital mode, press the white

OPTIONS

key to display the options menu.

é Use the

Ïî keys to select a setting and

press

¬ to enter the sub-menu.

• Favourites: use the Ïî keys to select your

favourite list and confirm with

u.

The “none” option deactivate any favourite list.

To create your own favourite list, see page 8.

•

Subtitle language: use the Ïî keys to

temporarily change the language and confirm

with

u.

•

Audio language:to temporarily change the

audio sound language.

To permanetly change the audio and subtitle

languages, use the Preferences menu (p. 7).

•

Mode:you can choose to only have radio

stations, TV channels or services without audio

or video

.

Remar

k:for the UK only, the TV list will contain

both radio stations and TV channels.

• banner duration: to select the duration for

which the banner is visible.

“ Press the white

OPTIONS

key to leave the menu.

The TV guide is an Electronic Service Guide

that allows you to look up digital programmes

as you would in a newspaper or TV magazine.

You can navigate through the list of digital

programmes and obtain detailed information

on the programmes.You can also program the

TV to provide a digital channel to be recorded.

& From the digital mode, press the

o

key to

display the TV guide :

A list of all the digital programmes in the

currently selected favourite list is displayed.

é Use the Ï key to enter into the

Preset/service list or press ¬ to access

Today list.

“ Use the îÏ keys to select a programme.

‘ The TV guide features are displayed at the

bottom of the screen. Use the coloured keys red,

green, yellow, blue or white to activate them :

• Record (red key) : this feature enables you to

record a digital channel even the TV is in

standby mode.You will still have to program

your video recorder.

• Record list (green key) : this menu gives the

list of recording schedules.You can check,

modify, delete or add a new schedule by using

the cursor or coloured keys as indicated on

the screen.

•

To p

(yellow key)

: to go directly to the top of the

list.

• Close (blue key) : to exit from the TV guide.

• Options (white ∫ key) : with this menu, you

can select your favourite list, mode or themes.

Themes are areas of interest, you can for

example decide to display only : drama, news,

movie, ...

( Press the

∂

key if you want to dislay more

information about the selected programme (if

available).

§ Press the

o

key to leave the menu.

TV guide

Options

Selects the active favourite list

Exit

Favourites

Subtitle language

Audio language

Mode

None

List 1

List 2

List 3

List 4

OptionsCloseTo pRecord listRecord

1 BBC ONE

2 BBC TWO

3 ITV Channel 3

4 Channel 4

5ITV 2

6 BBC CHOICE

See It Saw

Snooker

Tr isha

-

Gmtv2

Oakie Doke

Microsoap

Ice Skating

This morning

-

This afternoon

Bodger & Badger

1 17:15-17:25 17:24

BBC ONE See It Saw

Now/Next Today

Preset/service Now Next

10

Recording function

This feature enables you to record a digital

channel while the TV is in standby mode.You

will still have to program your video recorder.

Important:The video recorder must be connected

to EXT2. Please note that it is NOT possible to record

one digital channel and watch another digital channel

at the same time.You can however record a digital

channel and watch an analogue channel on your TV, or

vice versa.

& From the digital mode, press the

o

key to

display the TV guide.

é Use the Ï

key to enter into the Preset/service

list or press ¬ to access Today list.

“ Press the

RED key to call the Record menu.

‘ Use the

Ïî keys to select a setting and

press

¬ to enter into the sub-menu. Make

your adjustment and press

u or È to exit.

• Name : the selected programme will be

displayed here.

• Service : you can change the number of the

programme you want to record. Press

u to

confirm.

Note

: it is only possible to change to a number

that is in the currently selected favourite list.

• Enter your pin code if locked : enter your

secret code only if you have activated the

access restriction feature (see p.7). Press

u

to confirm.

•Day & Month : enter the date by using the

09

or

@

P

#

keys. Press u to exit

• Start time : enter the start time.

• End time : enter the end time.

• Audio language : select your language and

confirm with

u.

• Subtitle language : make your selection and

confirm with

u.

• Subtitles for hearing impaired : select

Yes

or No and confirm with u.

• Occurrence : select

Once, Daily or Weekly

and confirm with u.

( Press the

RED key to store your recording.

The TV guide reappears.

You can press the

GREEN key to display the list of

recordings you have set.

§ If you have finished watching television, you must

leave it in standby in order for the recording

program to be activated.

Important:never switch off the TV with the power

button when a recording has been programmed,

but use the standby key on the remote control.

è If you wish to continue watching another

digital channel after setting a timer, you can do

so by changing channels in the normal way.

! If you are watching another digital channel when

the timer is due to start, the timer alarm will sound

and present you with the option of switching

channels or continuing to watch the current

channel.

ç You can also watch analogue channels while

recording digital channels. Press the

v key to

switch the TV to analogue mode.

2 BBC 2

CloseCancelStore

Name

Service

Enter your pin code if locked

Day & Month

Start time

End time

Audio language

11:46

See it saw

2 BBC 2

16/02

12:15

12:30

English

11

Automatic tuning of analogue programmes

Sorting analogue programmes

This menu allows you to automatically search

for all the analogue programmes available in

your region.

& From analogue mode, press the

W MENU

key

to display the main menu.

é With the cursor, select the

Install menu then

the

Auto Store menu and press ¬.The

search begins.After several minutes, the

Install

menu reappears automatically.

“ If the transmitter or the cable network

broadcasts the automatic sort signal, the

programmes will be correctly numbered.

‘ If this is not the case, the programmes found

will be numbered in descending order starting

at 99, 98, 97, etc.

Use the

Sort menu to renumber them.

Some transmitters or cable networks broadcast

their own sort parameters (region, language, etc.).

Where this is the case, make your choice using the

îÏ keys and confirm with ¬.

To exit or interrupt the search, press the

W MENU

key.

If no picture is found, refer to the chapter entitled

Tips on p. 18.

( To exit from the menus, press

∂.

& Press the

W MENU

key to display the main menu.

é With the cursor, select the Install menu

followed by the

Sort menu.

“ Select the programme you want to move using

the

îÏ keys and press ¬.

‘ Then use the

îÏ keys to select the new

number and validate with

È.

( Repeat steps “ and ‘ for each program you

wish to renumber.

§ To quit the menus, press

∂.

Auto Store

• Program 2

• TV 470 MHz

• ••••••••••••••••••••••••••••••••

Mainge

• Picture

• Sound

• Features

$ Install

Î

ï

Install

• Auto Store

• Manual Store

$

Sort

Æ

• Name

000

001 BBC1

002 BBC2

003

Æ

ANGLI

004 CH4

005 CH5

12

Manual tuning of analogue programmes

Naming analogue programmes

This menu allows you to store the analogue

programmes one at time.

& Press

W MENU

.

é With the cursor, select the

Install menu then

Manual Store :

“

System : select Europe (automatic detection*)

or

West Europe (BG standard), East Europe

(DK standard), UK (I standard) or France (LL'

standard).

* Except for France (standard LL'): in this case

select the option FRANCE.

‘

Search : If you know the frequency of the

programme required, enter its number directly

using the

09keys.Alternatively press ¬.

The search begins.As soon as a programme is

found, the search will stop.

If no programme is found, refer to the Tips chapter

on page 18).

(

Program No. : enter the required number with

the

È¬ or 0 to 9 keys.

§

Fine Tune : if the reception is not satisfactory,

try adjusting the frequency using the

È¬

keys.

è

Store :press ¬.The programme is stored.

! Repeat steps ‘ to è for each programme to

be stored.

ç To quit the menus, press

∂.

If required, you can give a name to the analogue

programmes and external connectors.

& Press

W MENU

.

é With the cursor, select the

Install menu, then

Name :

“ Select the programme you wish to name using

the keys 09or @ P #.

Note: on installation, the programmes are named

automatically when the correct information is

transmitted by the broadcaster.

‘ Use the

È¬ keys to move within the name

display area (5 characters) and the

îÏ keys

to choose the characters.

( When the name has been entered, press

È.

The name is stored.

§ Repeat steps “ to ( for each programme to

be named.

è To exit from the menus, press

∂

.

Mainge

• Picture

• Sound

• Features

$ Install

Manual Store

Î

$

System Europe Æ

• Search

• Program No.

• Fine Tune

• Store

ï

Mainge

• Picture

• Sound

• Features

$ Install

Î

ï

Install

• Auto Store

• Manual Store

• Sort

$

Name

Æ

000

001 BBC1

002 BBC2

003

Æ

ANGLI

004 CH4

005 CH5

13

Picture settings

Sound adjustments

& Press

W MENU

then ¬.The Picture menu is

displayed:

é Use the

îÏ keys to select a setting and

the

È¬ keys to adjust.

Note: during the picture adjustment, only the

selected line remains displayed. Press

îÏ to

display the menu again.

“ Once the adjustments have been made, select

Store and press ¬ to store them. Press ∂

to exit.

Description of the adjustments:

• Brightness: this changes picture brilliance.

• Colour: this changes the intensity of the colour.

• Contrast: this changes the difference

between the light and dark tones.

•

Sharpness: this changes the picture definition.

• Colour Temp.: this changes the colour

rendering:

Cool (bluer), Normal (balanced)

or

Warm (redder).

• Store: to store the picture adjustments and

settings (as well as the settings for

Contrast +

and NR in the Features menu).

& Press

W MENU

, select Sound (Ï) and

press

¬.The Sound menu is displayed:

é Use the

îÏ keys to select a setting and

the

È¬ keys to adjust.

“ Once the adjustments have been made, select

Store and press

¬ to store these changes.

‘ To quit the menus, press

∂.

Description of the settings:

• Tre ble: this alters the high frequency sounds.

• Bass: this alters the low frequency sounds.

• Balance: this balances the sound on the left

and right speakers.

• Delta Volume: this is used to compensate

any volume discrepancies between the

different programs or EXT sockets.This

setting is available for programs 0 to 40 and

the EXT sockets.

• AVL (Automatic Volume Leveller): this is

used to limit increases in sound, especially on

program change or advertising slots.

• Store: this is used to store the sound settings.

Feature settings

& Press

W MENU

, select Features (Ï) and

press

¬.You can adjust:

é Rotation (only available on very large screen

sets): large screen sets are sensitive to

terrestrial magnetic field variations.This setting

is used to compensate for this by adjusting the

picture rotation.

“ Contrast +: automatic adjustment of the

picture contrast which permanently sets the

darkest part of the picture to black.

‘ NR: attenuates picture noise (snow) in difficult

reception conditions.

Caution:

to store the Contrast + and NR

settings, use the Store choice in the Picture

menu.

( To quit the menus, press

∂.

Mainge

$ Picture

• Sound

• Features

• Install

Mainge

• Picture

$ Sound

• Features

• Install

Î

ï

Picture

$

Brightness

Í

--I------ 39

Æ

• Colour

• Contrast

• Sharpness

• Colour Temp.

• Store

Î

ï

Sound

$

Treble

Í

-----I---- 56

Æ

• Bass

• Balance

• Delta Volume

• AVL

• Store

14

Analogue Teletext

Teletext is an information system, broadcast by most analogue TV channels. It also provides subtitles

for people with hearing difficulties.

Press :

You will obtain:

12

BACK

VCR

DVD

MENU

OK

A/D

”

P(age)

P

564

879

0

¢

∫

†

Á

ª

-

3

-

+ +

.

DIGITAL

TV

[

OPTIONS

›Ó

¤Ÿ

Œ

Ë

MENU

SELECT

∏ù

SMART

Ø

MODE

CANCEL

Ë

TV

MENU

¢

¤

Ÿ

Ó

CANCEL

›

Œ

Teletext call

Selecting a

page

This is used to call teletext, change to transparent mode

and then exit.The summary appears with a list of items

that can be accessed. Each item has a corresponding 3 digit

page number.

Some digital programmes may also include analogue

teletext. If this is the case, it can be accessed by pressing the

teletext key for 3 seconds.

If no teletext is available, 100 will appear and the screen will remain

blank (in this case, exit from teletext and choose another channel).

Use the 0 to 9 or @ P # or È¬ keys to enter the page

number required . Example: page 120, enter

120.The

number is displayed top left, the counter turns and then the

page is displayed. Repeat this operation to view another page.

If the counter continues to search, this means that the page is

not transmitted. Select another number.

Direct access

to the items

Coloured areas are displayed at the bottom of the

screen.The 4 coloured keys are used to access the items

or corresponding pages.

The coloured areas flash when the item or the page is not yet

available.

Contents

This returns you to the contents page (usually page 100).

Stop sub-page

acquisition

Certain pages contain sub-pages which are automatically

displayed successively.This key is used to stop or resume

sub-page acquisition.The indication

_ appears top left.

Double height

teletext

Hidden

information

Favourite

pages

Press this key several times to display the upper, then the

lower part of the screen and then return to the normal

size teletext page. Cursor up/down key can also be used.

To display or hide the concealed information (games

solutions).

For teletext programs 0 to 40, you can store 4 favourite

pages which can then be accessed directly using the

coloured keys (red, green, yellow, blue).

& Press the

W MENU

key to change to favourite

pages mode.

é Display the teletext page that you want to store.

“ Press the coloured key of your choice for 3 seconds.

The page is now stored.

‘ Repeat the operation with the other coloured keys.

( You can now consult teletext and your favourite

pages will appear in colour at the bottom of the

screen.To retrieve the standard items, press

W MENU

.

To clear everything, press d for 5 seconds.

15

16:9 Formats

Digital Text

The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format

(conventional screen). 4:3 pictures sometimes have a black band at the top and bottom of the screen

(letterbox format).This function allows you to optimise the picture display on screen.

Automatic switching

This TV set is also equipped with automatic switching which will select the correct-screen format,

provided the specific signals are transmitted with the programmes.

Using the different screen formats

Press the p key to select the different modes:

4:3, Zoom 14:9, Zoom 16:9, Subtitle Zoom, Super Wide and WideScreen.

With analogue programs only, you can access directly these settings with the

È and ¬ key.

Some digital channels, which you select like any other channel, offer dedicated teletext services

(for instance BBCTEXT). Some digital channels also offer information on the programme being

broadcast (a message may appear at the bottom of the screen).

& To use the digital teletext, follow the instructions on screen.

é Depending on the service, you can be asked to use the cursor and

SELECT keys (u), the coloured

keys, the

TEXT key (c) and sometimes the numerical keys.

“ When you have finished watching teletext, select a different channel with

@ P #

keys or follow the

on screen instructions to return to picture.

4:3 Mode

The picture is reproduced in 4:3 format and a black band is

displayed on either side of the picture.With analogue programs only,

the picture may be progressively enlarged using the

îÏ keys.

Zoom 14:9

The picture is enlarged to 14:9 format, a thin black band remains on

both sides of the picture.With analogue programs, the

îÏ keys

allow you to compress vertically the image to view the top or the

bottom of the picture (subtitles).

Zoom 16:9

The picture is enlarged to 16:9 format.This mode is recommended

when displaying pictures which have black bands at the top and

bottom (letterbox format).With analogue programs, use the

îÏ

keys if you wish to display the top or the bottom of the picture.

Subtitle Zoom

This mode is used to display 4:3 pictures using the full surface of the

screen leaving the sub-titles visible.With analogue programs, use the

îÏ keys to increase or decrease the section at the bottom of

the picture.

Super Wide

This mode is used to display 4:3 pictures using the full surface of the

screen by enlarging the sides of the picture.With analogue programs,

the

îÏ keys allow you to move the image up or down.

Widescreen

This mode restores the correct proportions of pictures transmitted

in 16:9 using full screen display.

Note:

If you display a 4:3 picture in thid mode, it will be enlarged horizontally.

12

SMART SMART

564

879

0

ù

∏

3

P

(age)

--

++

”

ª-

[

Á

16

S-VHS

Video

R Audio L

S-VHS

Video

R Audio L

**

VHS, 8 mm

S-VHS, Hi-8

VCR

DVD

¢

∫

.

EXIT/OPTIONS

›Ó

¤Ÿ

Œ

Ø

MODE

CANCEL

Connecting peripheral equipment

The television has 2 external sockets situated at the back of the set (EXT1 and EXT2).

The EXT1 socket has audio and video inputs/outputs and RGB inputs.

The EXT2 socket has audio and video inputs/outputs and S-VHS inputs.

Video recorder (only)

Carry out the connections featured opposite.To record digital

programmes from your TV, the VCR must be connected to EXT2.

If your video recorder does not have a euroconnector socket, the

only connection possible is via the aerial cable.You will therefore

need to tune in your video recorder's test signal and assign it

programme number 0 (refer to manual store, p. 12).

To reproduce the video recorder picture, press 0. In this case it

will not be possible to record digital channels.

Video recorder with decoder

Connect the decoder to the second euroconnector socket

of the video recorder.You will then be able to record

scrambled transmissions.

Video recorder

Satellite receiver, decoder, DVD, games, etc.

Carry out the connections featured opposite.

To optimise picture quality, connect the equipment which

produces the RGB signals (digital decoder, games, etc.) to

EXT1, and the equipment which produces the S-VHS

signals (S-VHS and Hi-8 video recorders, certain DVD

drives) to EXT2 and all other equipment to either EXT1

or EXT2.

Carry out the connections featured opposite.

With the

n key, select AV / S-VHS.

For a monophonic device, connect the audio signal to the

AUDIO L input. Use the e key to reproduce the sound on the

left and right speakers of the TV set.

Headphones

When headphones are connected, the sound on the TV set

will be cut.The

@

”

# keys are used to adjust the volume

level.

The headphone impedance must be between 32 and 600 Ohms.

Other equipment

Side connections

To select connected equipment

Press the n key to select EXT1, EXT2 / S-VHS2 (S-VHS signals

from the EXT2 socket) and AV / S-VHS for the side connections.

Most equipment (decoder, video recorder) carries out the switching itself.

VCR

EXT 2

EXT 1

17

VCR / DVD mode selector

To connect to a hi-fi system, use an audio connection cable

and connect the “L” and “R” outputs on the TV set to the

“AUDIO IN” “L” and “R” input on your hi-fi amplifier.

Use a digital audio connecting cable and connect the

television’s “SPDIF” output (only available on certain versions) to

a “DIGITAL IN” input on the amplifier (amplifier with coaxial

digital input).

A common interface is available to connect a CAM

(conditional access module) and a smartcard. Please contact

your service provider to get more information about these

modules.

Note

: the television should always be switched off before any module

is inserted in the common interface slot.

Amplifier

Common interface

standby

· record *,

∆ pause,

Ê stop,

Æ play,

¢ rewind,

∫ fast forward,

bring up a menu *

select (

îÏ) and set (È¬) *

u confirm*

select programme,

enter a number

* Some programming functions are not available on all models

(cursors, menu, OK key, etc.).

The remote control is compatible with all the video recorders in our

range as well as models which use the RC5 signalling standard.

12

BACK

VCR

DVD

MENU

OK

A/D

”

P(age)

564

879

0

¢

∫

†

Á

ª

-

3

-

+ +

.

DIGITAL

TV

[

OPTIONS

›Ó

¤Ÿ

Œ

Ë

MENU

SELECT

∏ù

SMART

Ø

MODE

CANCEL

The remote control allows you to control the main functions of your video recorder or DVD.

& Press the

MODE key to select the required mode : VCR (video recorder) or DVD.

A green indicator lights up to show the selected mode. It returns automatically (TV mode) after

20 seconds without action.

é Then press one of the following keys :

SPDIF

18

Tips

Poor reception (in analogue mode)

The proximity of mountains or high buildings

may be responsible for ghost pictures, echoing

or shadows. In this case, try manually adjusting

your picture: see "fine tuning" (p.12) or modify

the orientation of the outside aerial. Does your

antenna enable you to receive broadcasts in

this frequency range (UHF or VHF band)?

In the event of difficult reception (snowy

picture) switch the

NR on the Feature analogue

menu to

ON.(p. 13).

Bad picture (in digital mode)

If the picture freezes a lot, or in cases of block

effect, there is a problem of poor reception. Please

check with the signal strength menu (see p. 6).

Depending on the strength of digital terrestrial

signals available in your area, standard aerials

used for analogue transmissions will in most

cases provide satisfactory reception of digital

signals. If it is not the case, a good quality

narrow beam antenna should be professionally

installed outside the property and aligned to

capture the maximum digital signal strength.

No picture

Have you connected the aerial socket properly?

Have you chosen the right system? (p. 12).

Poorly connected euroconnector cables or

aerial sockets are often the cause of picture or

sound problems (sometimes the connectors

can become half disconnected if the TV set is

moved or turned). Check all connections.

No sound (in analogue mode)

If on certain channels you receive a picture but no

sound, this means that you do not have the correct

TV system. Modify the

SYSTEM setting (p.12).

The remote control no longer works.

The TV set does not react to the remote

control; the indicator on the set no longer

flashes when you use the remote control?

Replace the batteries.

Standby

If the set receives no signal for 10 mins, it

automatically goes into standby mode.

To save power, your set is fitted with components

that give it a very low power consumption when in

standby mode.

Cleaning the set

Only use a clean, soft and lint-free cloth to clean

the screen and the casing of your set. Do not use

alcohol-based or solvent-based products.

Still no results?

If your TV set breaks down, never attempt to repair

it yourself:contact your dealer's after-sales service.

Centre Frequencies Table (in KHz)

Digital Frequency Nominal Centre

Channel Frequency KHz

21 . . . . . . . . . . . . . . . . .474 000

22 . . . . . . . . . . . . . . . . .482 000

23 . . . . . . . . . . . . . . . . .490 000

24 . . . . . . . . . . . . . . . . .498 000

25 . . . . . . . . . . . . . . . . .506 000

26 . . . . . . . . . . . . . . . . .514 000

27 . . . . . . . . . . . . . . . . .522 000

28 . . . . . . . . . . . . . . . . .530 000

29 . . . . . . . . . . . . . . . . .538 000

30 . . . . . . . . . . . . . . . . .546 000

31 . . . . . . . . . . . . . . . . .554 000

32 . . . . . . . . . . . . . . . . .562 000

33 . . . . . . . . . . . . . . . . .570 000

34 . . . . . . . . . . . . . . . . .578 000

35 . . . . . . . . . . . . . . . . .586 000

36 . . . . . . . . . . . . . . . . .594 000

37 . . . . . . . . . . . . . . . . .602 000

38 . . . . . . . . . . . . . . . . .610 000

39 . . . . . . . . . . . . . . . . .618 000

40 . . . . . . . . . . . . . . . . .626 000

41 . . . . . . . . . . . . . . . . .634 000

42 . . . . . . . . . . . . . . . . .642 000

43 . . . . . . . . . . . . . . . . .650 000

44 . . . . . . . . . . . . . . . . .658 000

45 . . . . . . . . . . . . . . . . .666 000

Digital Frequency Nominal Centre

Channel Frequency KHz

46 . . . . . . . . . . . . . . . . .674 000

47 . . . . . . . . . . . . . . . . .682 000

48 . . . . . . . . . . . . . . . . .690 000

49 . . . . . . . . . . . . . . . . .698 000

50 . . . . . . . . . . . . . . . . .706 000

51 . . . . . . . . . . . . . . . . .714 000

52 . . . . . . . . . . . . . . . . .722 000

53 . . . . . . . . . . . . . . . . .730 000

54 . . . . . . . . . . . . . . . . .738 000

55 . . . . . . . . . . . . . . . . .746 000

56 . . . . . . . . . . . . . . . . .754 000

57 . . . . . . . . . . . . . . . . .762 000

58 . . . . . . . . . . . . . . . . .770 000

59 . . . . . . . . . . . . . . . . .778 000

60 . . . . . . . . . . . . . . . . .786 000

61 . . . . . . . . . . . . . . . . .794 000

62 . . . . . . . . . . . . . . . . .802 000

63 . . . . . . . . . . . . . . . . .810 000

64 . . . . . . . . . . . . . . . . .818 000

65 . . . . . . . . . . . . . . . . .826 000

66 . . . . . . . . . . . . . . . . .834 000

67 . . . . . . . . . . . . . . . . .842 000

68 . . . . . . . . . . . . . . . . .850 000

69 . . . . . . . . . . . . . . . . .858 000

La page charge ...

Philips 28DW6559 Le manuel du propriétaire

Ce manuel convient également à

Philips 28DW6559 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents