Amana AWO6317SFS AWO6317SFS Use and Care EN

Catégorie
Cuisinières
Taper
AWO6317SFS Use and Care EN
THANK YOU for purchasing this high-quality product. Register your new oven at www.amana.com. In Canada, register your oven
at www.amanacanada.ca.
For future reference, please make a note of your product model and serial numbers. These can be located under the control panel.
Model Number _________________________________________ Serial Number __________________________________________
Para una versión de estas instrucciones en español, visite www.amana.com.
Deberá tener los números de modelo y serie. Se encuentran ubicada debajo del panel de control.
Table of Contents
BUILT-IN ELECTRIC OVEN
USERINSTRUCTIONS
W10785116B
OVEN SAFETY ................................................................................2
FEATURE GUIDE ............................................................................3
OVEN USE ....................................................................................... 5
Electronic Oven Controls .............................................................5
Sabbath Mode..............................................................................6
Aluminum Foil ............................................................................... 6
Positioning Racks and Bakeware ................................................6
Oven Vent .....................................................................................7
Baking and Roasting ....................................................................7
Broiling..........................................................................................7
Keep Warm ................................................................................... 8
Favorite ......................................................................................... 8
Cook & Hold .................................................................................9
Cook Time ....................................................................................9
OVEN CARE ..................................................................................10
Self-Cleaning Cycle ....................................................................10
General Cleaning ........................................................................11
Oven Lights ................................................................................11
PROBLEM SOLVER ......................................................................12
ACCESSORIES .............................................................................13
WARRANTY ..................................................................................14
2
OVEN SAFETY
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't
follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the oven, follow
basic precautions, including the following:
Proper Installation – Be sure the oven is properly installed
and grounded by a qualified technician.
Never Use the Oven for Warming or Heating the Room.
Do Not Leave Children Alone Children should not be left
alone or unattended in area where oven is in use. They
should never be allowed to sit or stand on any part of the
oven.
Wear Proper Apparel Loose-fitting or hanging garments
should never be worn while using the oven.
User Servicing Do not repair or replace any part of the
oven unless specifically recommended in the manual. All
other servicing should be referred to a qualified technician.
Storage in Oven Flammable materials should not be
stored in an oven.
Do Not Use Water on Grease Fires Smother fire or flame
or use dry chemical or foam-type extinguisher.
Use Only Dry Potholders – Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let
potholder touch hot heating elements. Do not use a towel
or other bulky cloth.
Use Care When Opening Door – Let hot air or steam
escape before removing or replacing food.
Do Not Heat Unopened Food Containers Build-up of
pressure may cause container to burst and result in injury.
Keep Oven Vent Ducts Unobstructed.
Placement of Oven Racks Always place oven racks in
desired location while oven is cool. If rack must be moved
while oven is hot, do not let potholder contact hot heating
element in oven.
DO NOT TOUCH HEATING ELEMENTS OR INTERIOR
SURFACES OF OVEN Heating elements may be hot
even though they are dark in color. Interior surfaces of an
oven become hot enough to cause burns. During and after
use, do not touch, or let clothing or other flammable
materials contact heating elements or interior surfaces of
oven until they have had sufficient time to cool. Other
surfaces of the oven may become hot enough to cause
burns – among these surfaces are oven vent openings and
surfaces near these openings, oven doors, and
windows of
oven doors.
For self-cleaning ovens:
Do Not Clean Gasket – The gasket is essential for a good
seal. Care should be taken not to rub, damage, or move
the gasket.
Do Not Use Oven Cleaners – No commercial oven cleaner
or oven liner protective coating of any kind should be used
in or around any part of the oven.
Clean Only Parts Listed in Manual.
Before Self-Cleaning the Oven Remove broiler pan and
other utensils.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
3
FEATURE GUIDE
This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or Frequently Asked
Questions (FAQs) section of our website at www.amana.com for more detailed instructions. In Canada, reference the Customer Service
section at www.amanacanada.ca. For more specific details on a feature and steps to use the features listed, refer to the titled section for
that feature.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
Keypad Feature Instructions
CLOCK Clock
This clock can use a 12- or 24-hour cycle. See “Electronic Oven Controls” section.
1. Press CLOCK until “Clock” is displayed.
2. Press the number keypads to set the time of day.
3. Press START.
LIGHT Oven cavity light
While the oven door(s) are closed, press LIGHT to turn the light(s) on and off.
The oven light(s) will come on when an oven door is opened.
TIMER ON•OFF Oven timer
The Timer can be set in hours or minutes up to 9 hours and 59 minutes.
1. Press TIMER ON•OFF.
2. Press the number keypads to set the length of time in hr-min. Leading zeros
do not have to be entered. For example, for 2 minutes, enter “2.”
3. Press TIMER ON•OFF to begin the countdown. If enabled, timer tone(s) will
sound at the end of countdown.
4. Press TIMER ON•OFF to cancel the Timer and return to the time of day.
Do not press OFF/CANCEL because the oven will turn off.
START Cooking start
The Start keypad begins any oven function. If Start is not pressed within 2 minutes
after pressing a keypad, the function is canceled and the time of day is displayed.
OFF/CANCEL Oven function
The Off/Cancel keypad stops any oven function except the Clock, Timer, and Control Lock.
BAKE Baking and
roasting
1. Press BAKE.
2. Press the number keypads to set the desired temperature. If the temperature
entered is not in the range of the temperatures allowed, the minimum or maximum
allowed temperature will be displayed. Enter a temperature in the allowable range.
3. (Single rack baking only) Press START. Rapid Preheat will begin.
IMPORTANT: Rapid Preheat should be used only for single-rack baking.
4. (Multiple rack baking) Press START. Press START again to cancel Rapid Preheat.
5. To change the temperature, repeat steps 2 and 3.
6. Press OFF/CANCEL when finished.
4
Keypad Feature Instructions
BROIL Broiling
1. Press BROIL.
2. Press the number keypads to set the desired temperature. If the temperature
entered is not in the range of the temperatures allowed, the minimum or maximum
allowed temperature will be displayed. Enter a temperature in the allowable range.
3. Press START, and then allow the oven to preheat for 5 minutes.
4. Position the cookware in the oven, and close the door.
5. To change the temperature, repeat steps 2 and 3.
6. Press OFF/CANCEL when finished.
FAVORITE Saved favorite
The Favorite feature allows you to save the time and temperature settings from
any active cook function. To save or use favorite, see the “Favorite” section.
KEEP WARM Hold warm
Food must be at serving temperature before placing it in the warmed oven.
1. Press KEEP WARM.
2. Press the number keypads to set the desired temperature. If the temperature
entered is not in the range of the temperatures allowed, the minimum or maximum
allowed temperature will be displayed. Enter a temperature in the allowable range.
3. Press START.
4. To change the temperature, repeat steps 2 and 3.
5. Press OFF/CANCEL when finished.
DELAY START Delayed start
The Delay Start keypad is used to enter the starting time for an oven function with
a delayed start. Delay Start should not be used for foods such as breads and cakes
because they may not bake properly.
To set a Timed Cook or a Delayed Timed Cook, see the “Cook Time” section.
COOK TIME Timed cooking
Cook Time allows the oven to be set to turn on at a certain time of day,
cook for a set length of time, and/or shut off automatically.
To set a Timed Cook or a Delayed Timed Cook, see the “Cook Time” section.
COOK & HOLD Timed cooking
and keep warm
Cook & Hold allows the oven to be set to cook for a set length of time,
followed by a 1-hour Keep Warm cycle.
To set a Cook & Hold or a Delayed Cook & Hold, see the “Cook & Hold” section.
SELF CLEAN Self-cleaning
cycle
See the “Self-Cleaning Cycle” section.
CONTROL LOCK
hold 3 sec.
Oven control
lockout
1. Check that the oven and timer are OFF.
2. Press and hold CONTROL LOCK for 3 seconds.
3. If enabled, a tone will sound and the controls will be locked.
4. Repeat to unlock. No keypads will function with the controls locked.
SETTINGS Oven use
functions
Settings enables you to personalize the audible tones and oven operation to suit
your needs. See the “Oven Use” section.
5
OVEN USE
Odors and smoke are normal when the oven is used the first
few times or when it is heavily soiled.
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off. Exposure to the fumes may result in death
to certain birds. Always move birds to another closed and well-
ventilated room.
Electronic Oven Controls
Control Display
The display will light up when first powered up or after a power
loss. When oven is not in use, the time of day is displayed.
Tones
Tones are audible signals, indicating the following:
One Tone
Valid keypad press
Oven is preheated (long tone).
Kitchen timer (long tone with reminder tone every 60 seconds)
Function has been entered.
Three Tones
Invalid keypad press
Four Tones
End of cycle (with reminder tone every 60 seconds)
Use the Settings keypad to change the tone settings.
Settings
Many features of the oven control can be adjusted to meet
your personal needs. These changes are made using the
Settings keypad.
Use the Settings keypad to scroll through the features that
can be changed. Each press of the Settings keypad will
advance the display to the next setting. After selecting
the feature to be changed, the control will prompt you for
the required input. Details of all of the feature changes are
explained in the following sections.
Press OFF/CANCEL to exit Settings.
Fahrenheit and Celsius
The temperature is preset to Fahrenheit but can be changed
to Celsius.
1. Press SETTINGS until “TEMP UNIT” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF/CANCEL to exit and display the time of day.
Audible Tones Disable
Turns off most tones, including the end of cycle tone
and key press tones. Reminder tones remain enabled
when audible tones are disabled.
1. Press SETTINGS until “SOUND” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF/CANCEL to exit and display the time of day.
Sound Volume
Sets the pitch of the tone to either high or low.
1. Press SETTINGS until “SOUND VOLUME” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF/CANCEL to exit and display the time of day.
End of Cycle Tone
Activates or turns off the tones that sound at the end of a cycle.
1. Press SETTINGS until “END TONE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF/CANCEL to exit and display the time of day.
Key Press Tones
Activates or turns off the tones when a keypad is pressed.
1. Press SETTINGS until “KEYPRESS TONE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF/CANCEL to exit and display the time of day.
Reminder Tones Disable
Turns off the short repeating tone that sounds every 1 minute
after the end of cycle tones.
1. Press SETTINGS until “REMINDER TONE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF/CANCEL to exit and display the time of day.
12/24 Hour Clock
1. Press SETTINGS until “12/24 HOUR” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF/CANCEL to exit and display the time of day.
12-Hour Shutoff
The oven control is set to automatically shut off the oven
12 hours after the oven initiates a cook or clean function.
This will not interfere with any timed or delay cook functions.
1. Press SETTINGS until “12 HR AUTO OFF” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF/CANCEL to exit and display the time of day.
Languages - Scrolling Display Text
Language options are English and French.
1. Press SETTINGS until “LANGUAGE” is displayed.
2. The current setting will be displayed.
3. Press the number keypad as instructed by the scrolling
text to select the new language.
4. Press OFF/CANCEL to exit and display the time of day.
6
Oven Temperature Offset Control
IMPORTANT: Do not use a thermometer to measure oven
temperature. Elements will cycle on and off as needed to provide
consistent temperature, but they may run slightly hot or cool at
any point in time due to this cycling. Most thermometers are slow
to react to temperature change and will not provide an accurate
reading due to this cycling.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature can
be adjusted to personalize it for your cooking needs. It can be
changed to Fahrenheit or Celsius.
To Adjust Oven Temperature:
1. Press SETTINGS until “TEMP CALIB” is displayed.
2. The current setting will be displayed.
3. Press START to select the choice displayed in Step 2.
Wait several seconds for the display to change or press
START, and then continue with Step 4.
4. Press the “3” keypad to increase the temperature in 5°F
(3°C) increments, or press the “6” keypad to decrease
the temperature in 5°F (3°C) increments. The range is
from -30°F to +30°F (-18°C to +18°C).
5. Press START.
6. Press OFF/CANCEL to exit and display the time of day.
Demo Mode
IMPORTANT: This feature is intended for use on the sales floor
with 120V power connection and permits the control features
to be demonstrated without heating elements turning on. If this
feature is activated, the oven will not work.
1. Press SETTINGS until “DEMO MODE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF/CANCEL to exit and display the time of day.
Sabbath Mode
The Sabbath Mode sets the oven to remain on in a bake setting
until turned off.
When the Sabbath Mode is set, only the Bake cycle will operate.
All other cooking and cleaning cycles are disabled. No tones will
sound, and the displays will not indicate temperature changes.
When the oven door is opened or closed, the oven light will
not turn on or off and the heating elements will not turn on
or off immediately.
NOTE: If a power failure happens while Sabbath Mode is running,
the oven will show Sabbath Mode is on, but the Bake cycle will not
be on. If the oven door is opened during this time, the oven light
will turn on.
To Enable Sabbath Mode Capability (One Time Only):
1. Press SETTINGS until “SABBATH” is displayed.
2. Press the “1” keypad. Sabbath Mode can be activated
for baking.
3. Press OFF/CANCEL to save the setting and exit to display
the time of day.
NOTE: To disable the Sabbath Mode, repeat steps 1 through 3
to change the status from “SABBATH ON” to “SABBATH OFF.”
To Activate Sabbath Mode:
1. Press BAKE.
2. Press the number keypads to set the desired temperature.
If the temperature entered is not in the range of the
temperatures allowed, the minimum or maximum allowed
temperature will be displayed. Enter a temperature in the
allowable range.
3. Press START.
For timed cooking in Sabbath Mode, press COOK TIME, and
then press the number keypads to set the desired cook time.
Press START.
4. Press SETTINGS. Three tones will sound. Then press “7.”
“SAb” will appear in the display.
To Adjust Temperature:
1. Press the number keypad as instructed by the scrolling
text to select the new temperature.
NOTE: The temperature adjustment will not appear on
the display, and no tones will sound. The scrolling text
will be shown on the display as it was before the keypad
was pressed.
2. Press START.
To Deactivate Sabbath Mode:
Press SETTINGS, and then press “7” to return to regular baking,
or press OFF/CANCEL to turn off the oven(s).
Aluminum Foil
IMPORTANT: To avoid permanent damage to the oven bottom
finish, do not line the oven bottom with any type of foil or liner.
For best cooking results, do not cover entire oven rack with foil
because air must be able to move freely.
Positioning Racks and Bakeware
IMPORTANT: To avoid permanent damage to the porcelain
finish, do not place food or bakeware directly on the oven
door or bottom.
Racks
Position racks before turning on the oven.
Do not position racks with bakeware on them.
Make sure racks are level.
Place food so it will not rise into the broil element. Allow
at least
1
/
2
" (1.3 cm) between pans and the broil element.
To move a rack, pull it out to the stop position, raise the front
edge, and then lift it out. Use the following illustrations and
charts as a guide for positioning racks.
Rack Positions
Broiling
Food Rack Position
Broiled meats, poultry, fish 6
Broiling/searing meats, hamburgers, steaks 6
6
5
4
3
2
1
7
Baking
Food Rack Position
Large roasts, roasted meats or poultry 1 or 2
Most baked goods, casseroles 2 or 3
Baking Layer Cakes on 1 Rack
Place the cakes on the rack as shown.
Multiple Rack Cooking
2-rack: Use rack positions 2 and 5 for regular baking.
Baking Layer Cakes on 2 Racks
For best results when baking cakes on 2 racks, use rack
positions 2 and 5 with the Bake function. Place the cakes
on the racks as shown.
Baking Cookies on 2 Racks
For best results when baking cookies on 2 racks, use rack
positions 2 and 5 with the Bake function.
Bakeware
To cook food evenly, hot air must be able to circulate.
Allow 2" (5.0 cm) of space around bakeware and oven walls.
Use the following chart as a guide.
Number of Pan(s) Position on Rack
1 Center of rack
2 Side by side
3 or 4 Refer to the previous illustration
NOTE: Bakeware materials and color may affect results. Dark,
dull, non-stick or glass pans may require shorter baking times;
in contrast insulated or stainless steel pans may require longer
baking times. Follow bakeware manufacturer’s recommendations.
Oven Vent
The oven vent should not be blocked or covered since they allow
the inlet of fresh air into the cooling system. Also, the bottom
vent should not be blocked or covered since it allows the inlet
of fresh air into the cooling system and the outlet of hot air from
the cooling system. Blocking or covering vents will cause poor
air circulation, affecting cooking, cleaning, and cooling results.
Baking and Roasting
Preheating
When beginning a Bake cycle, the oven will begin preheating after
Start is pressed. The oven will take approximately 13 to 19 minutes
to reach 350°F (177°C) with all of the oven racks provided with
your oven inside the oven cavity. Higher temperatures will take
longer to preheat. The preheat cycle rapidly increases the oven
temperature. The actual oven temperature will go above your set
temperature to offset the heat lost when your oven door is opened
to insert food. This ensures that when you place your food in the
oven, the oven will begin at the proper temperature. Insert your
food when the preheat tone sounds. Do not open the door during
preheat before the tone sounds.
Rapid Preheat
Rapid Preheat can be used to shorten the preheating time. Only
one standard flat oven rack should be in the oven during Rapid
Preheat. Extra racks should be removed prior to starting Rapid
Preheat. The preheating cycle should be completed before placing
food in the oven. When the Rapid Preheat cycle is complete, the
oven starts a normal Bake cycle.
IMPORTANT: Rapid Preheat should be used only for
single-rack baking.
Oven Temperature
While in use, the oven elements will cycle on and off as needed
to maintain a consistent temperature, but they may run slightly
hot or cool at any point in time due to this cycling. Opening the
oven door while in use will release the hot air and cool the oven
which could impact the cooking time and performance. It is
recommended to use the oven light to monitor cooking progress.
NOTE: On models with convection, the convection fan may run
in the non-convection bake mode to improve oven performance.
Broiling
When broiling, preheat the oven for 5 minutes before putting food
in, unless recommended otherwise in the recipe. Position food
on grid in a broiler pan, and then place it in the center of the oven
rack. Close the oven door to ensure proper broiling temperature.
NOTE: Odors and smoke are normal the first few times the oven
is used or if the oven is heavily soiled.
Changing the temperature when broiling allows more precise
control when cooking. The lower the broil setting is, the slower the
cooking will be. Thicker cuts and unevenly shaped pieces of meat,
fish, and poultry may cook better at lower broil settings. Place the
food in the upper or lower oven. Refer to the “Positioning Racks
and Bakeware” section for more information.
On lower settings, the broil element will cycle on and off
to maintain the proper temperature.
For best results, use a broiler pan and grid. It is designed
to drain juices and help avoid spatter and smoke.
If you would like to purchase a broiler pan, one may
be ordered. Please refer to the “Accessories” section
for more information.
B
A
C
A. Control panel
B. Oven vent
C. Oven
8
Keep Warm
IMPORTANT: Food must be at serving temperature before placing
it in the warmed oven. Food may be held up to 1 hour; however,
breads and casseroles may become too dry if left in the oven
during the Keep Warm function. For best results, cover food.
The Keep Warm feature allows hot cooked foods to stay
at serving temperature.
To Use:
1. Press KEEP WARM.
2. Press the number keypads to set the desired temperature.
If the temperature entered is not in the range of the
temperatures allowed, the minimum or maximum allowed
temperature will be displayed. Enter a temperature in the
allowable range.
NOTE: The temperature may be changed at any time
by pressing the number keypads to enter the desired
temperature and then START.
3. Press START.
4. Place food in the oven.
5. Press OFF/CANCEL when finished.
6. Remove food from the oven.
To Cancel Keep Warm:
1. Press OFF/CANCEL.
2. Remove food from oven.
Favorite
The Favorite feature allows you to save the time and temperature
settings from any active cook function.
To Save a Cooking Function as a Favorite:
1. Press FAVORITE.
2. Press “2” to save the last performed cooking function.
A confirmation message will appear.
To Recall and Start a Favorite:
1. Press FAVORITE.
2. Press “1.” The last saved function will appear onscreen.
If no functions have ever been saved, “no favorite saved”
will appear.
3. The set temperature can be changed by using the number
keypad to enter the desired value, then pressing START.
The Cook Time (if available) can be changed by pressing
COOK TIME, and then using the number keypad to enter
desired time, then pressing START. The temperature and
time can be changed after the function has started.
4. Place food in the oven when required.
5. Press OFF/CANCEL when finished.
6. Remove food from the oven.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
9
Cook & Hold
Cook & Hold allows the oven to be set to cook for a set length
of time, followed by a 1-hour Keep Warm cycle.
Delay Cook & Hold allows the oven to be set to start cooking
after a length of time you set, cook for a set length of time,
followed by a 1-hour Keep Warm cycle.
Delay start should not be used for food such as breads and cakes
because they may not bake properly. Do not use delayed baking
if oven is already hot.
NOTE: During the Cook & Hold function, the Delay Start
and Cook Time are applied to the baking itself and not
for the “Holding Warm” phase.
1. Press BAKE.
2. Use the number keypads to enter the desired temperature.
NOTE: The temperature may be changed at any time by
using the number keypads to enter the desired temperature,
and then pressing START. Changing the temperature once
food is placed in the oven could affect the performance.
3. Press COOK & HOLD.
4. Use the number keypads to enter the desired cook time.
5. (Optional) If a Delay Start is desired, press DELAY START.
Use the number keypad to enter the desired time for delay.
Repeat steps 1 through 3.
6. Press START. The oven will preheat, and a beep will sound
when the preheat is done.
7. Place the food in the oven, and close the oven door
when preheat is complete.
8. At the end of the time set, the oven will keep warm
automatically, and the end of cycle tone will sound.
NOTE: To change the set cooking time at any time during
the cooking cycle:
a. Press COOK TIME.
b. Enter the desired time using the number keypads.
c. Press START.
d. Press COOK & HOLD.
Once the cook time countdown is complete, “Cooking
complete - Holding warm” will scroll in the text area until the
door is opened, Off/Cancel is pressed, or 1 hour has passed.
9. Press OFF/CANCEL to complete the cycle.
10. Remove food from the oven.
NOTE: To cancel the hold function without canceling the cooking
cycle, press COOK & HOLD after the Cook & Hold function is
enabled. The display will not show any change. Once the cook
time countdown is complete, “Cooking complete” will scroll in
the text area.
Cook Time
To Set a Timed Cook:
1. Press the keypad for any cooking function except Broil
or Keep Warm.
2. Press the number keypads to set the desired temperature.
If the temperature entered is not in the range of the
temperatures allowed, the minimum or maximum allowed
temperature will be displayed. Enter a temperature in the
allowable range.
3. Press COOK TIME.
4. Press the number keypads to enter the length of time to cook.
5. Press START. The display will count down the time.
When the time ends, the oven will shut off automatically.
The temperature and/or time setting can be changed
at any time.
To change the temperature, repeat steps 2 through 5
and press START.
To change the time setting, repeat steps 3 through 5.
6. Press OFF/CANCEL to clear the display.
To Set a Delayed Timed Cook:
1. Press DELAY START.
2. Press the number keypads to enter the number of hours
and/or minutes you want to delay the start time.
3. Press the keypad for any cooking function except Broil
or Keep Warm.
4. Press the number keypads to set the desired temperature.
If the temperature entered is not in the range of the
temperatures allowed, the minimum or maximum allowed
temperature will be displayed. Enter a temperature in the
allowable range.
5. Press START.
6. Press the number keypads to enter the length of time to cook.
7. Press START.
When the start time is reached, the oven will automatically
turn on.
To change the temperature after the delay countdown, repeat
steps 4 and 5. To change the time after the delay countdown,
press COOK TIME and then repeat steps 6 and 7.
When the set cook time ends, the oven will shut off
automatically.
8. Press OFF/CANCEL to clear the display.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
10
OVEN CARE
Self-Cleaning Cycle
IMPORTANT: The health of some birds is extremely sensitive
to the fumes given off during the Self-Cleaning cycle. Exposure
to the fumes may result in death to certain birds. Always move
birds to another closed and well-ventilated room.
Keep the kitchen well-ventilated during the Self-Cleaning cycle
to help get rid of heat, odors, and smoke.
Do not block the oven vent(s) during the Self-Cleaning cycle.
Air must be able to move freely. Depending on your model,
see “Oven Vent” or “Oven Vents” section.
Do not clean, rub, damage, or move the oven door gasket.
Prepare Oven:
Remove the broiler pan, grid, cookware and bakeware,
all cooking utensils, oven racks, aluminum foil and, on
some models, the temperature probe from the oven.
Use a damp cloth to clean inside door edge and the 1
1
/
2
"
(38 mm) area around the inside oven cavity frame, being
certain not to move or bend the gasket.
Wipe out any loose soil to reduce smoke and avoid damage.
At high temperatures, foods react with porcelain. Staining,
etching, pitting, or faint white spots can result. This will not
affect cooking performance.
IMPORTANT:
Oven temperature must be below 500°F (260°C) to
program a clean cycle.
How the Cycle Works
IMPORTANT: The heating and cooling of porcelain on steel
in the oven may result in discoloring, loss of gloss, hairline
cracks, and popping sounds.
The Self-Cleaning cycle uses very high temperatures, burning
soil to a powdery ash.
Once the oven has completely cooled, remove ash with a damp
cloth. To avoid breaking the glass, do not apply a cool damp cloth
to the inner door glass before it has completely cooled.
The oven light will not light during the Self-Cleaning cycle.
To stop the Self-Cleaning cycle at anytime, press OFF/CANCEL.
If the temperature is too high, the oven door will remain locked.
When the oven is locked, the door of the oven cannot be opened.
To avoid damage to the door, do not force the door open when
the oven is locked.
Before self-cleaning, make sure the door is completely closed or
the door will not lock and the Self-Cleaning cycle will not begin.
NOTE: 12 hours must pass before the next Self-Cleaning
can begin.
The oven is preset for the recommended cleaning cycle; however,
the time can be changed. Suggested cleaning times are 3 hours
for light soil and between 4 hours and 5 hours for average
to heavy soil.
Use the following chart as a guide to determine the desired
cleaning level.
Cleaning Level
Total Cleaning Time
(Includes a 20 Minute Cool Down Time)
1 3 hours 20 minutes
2 3 hours 40 minutes
3 4 hours
4 4 hours 20 minutes
5 4 hours 50 minutes
6 5 hours 20 minutes
To Self-Clean:
1. Close the oven door, and then press SELF CLEAN.
2. Choose the cleaning level desired by pressing the appropriate
number keypad as instructed by the scrolling text.
3. Press START.
The oven door will automatically lock.
When the Self-Cleaning cycle is complete and the oven cools,
the oven door will unlock.
4. When the oven is completely cooled, remove ash
with a damp cloth.
To Delay Start Self-Clean:
1. Close the oven door, and then press DELAY START.
2. Press the number keypads to enter the desired amount
of time by which you want to delay the start.
3. Press SELF CLEAN.
4. Choose the cleaning level desired by pressing the appropriate
number keypad as instructed by the scrolling text.
5. Press START.
The oven door will automatically lock after the
Delay Start countdown.
When the Self-Cleaning cycle is complete and the oven cools,
the oven door will unlock.
6. When the oven is completely cooled, remove ash
with a damp cloth.
WARNING
Burn Hazard
Do not touch the oven during the Self-Cleaning cycle.
Keep children away from oven during
Self-Cleaning cycle.
Failure to follow these instructions can result in burns.
11
General Cleaning
IMPORTANT: Before cleaning, make sure all controls are
OFF and the oven is cool. Always follow label instructions
on cleaning products. For additional information, you can
visit the Frequently Asked Questions (FAQs) section of
our website at www.amana.com. In Canada, refer to the
Customer Service section at www.amanacanada.ca.
Soap, water, and a soft cloth or sponge are suggested first
unless otherwise noted.
EXTERIOR PORCELAIN ENAMEL SURFACES
(on some models)
Food spills containing acids, such as vinegar and tomato, should
be cleaned as soon as the entire oven is cool. These spills may
affect the finish.
Cleaning Method:
Glass cleaner, mild liquid cleaner, or nonabrasive
scrubbing pad:
Gently clean around the model/serial/rating plate
because scrubbing may remove numbers.
affresh
®
Kitchen and Appliance Cleaner Part Number
W10355010 (not included):
See the “Accessories” section for more information.
STAINLESS STEEL (on some models)
NOTE: To avoid damage to stainless steel surfaces, do not use
soap-filled scouring pads, abrasive cleaners, steel-wool pads,
gritty washcloths, or abrasive paper towels. Damage may occur
to stainless steel surfaces, even with one-time or limited use.
Cleaning Method:
Rub in direction of grain to avoid damaging.
affresh
®
Stainless Steel Cleaner Part Number W10355016:
See the “Accessories” section for more information.
METALLIC PAINT (on some models)
Do not use abrasive cleaners, cleaners with bleach, rust removers,
ammonia, or sodium hydroxide (lye) because paint surface
may stain.
CONTROL PANEL AND OVEN DOOR EXTERIOR
To avoid damage to the control panel, do not use abrasive
cleaners, steel-wool pads, gritty washcloths, or abrasive
paper towels.
Cleaning Method:
Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly
on panel.
affresh
®
Kitchen and Appliance Cleaner Part Number
W10355010 (not included):
See the “Accessories” section for more information.
OVEN RACKS
Cleaning Method:
Steel-wool pad
For racks that have discolored and are harder to slide, a light
coating of vegetable oil applied to the rack guides will help
them slide.
OVEN CAVITY
Do not use oven cleaners.
Food spills should be cleaned after the oven cools. At high
temperatures, foods react with porcelain and staining, etching,
pitting, or faint white spots can result.
Cleaning Method:
Self-Cleaning cycle:
See “Self-Cleaning Cycle” first.
Oven Lights
The oven light(s) are standard 40-watt appliance bulbs.
Before replacing, make sure the oven is cool and the controls
are turned off.
To Replace:
1. Disconnect power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb, and then bulb cover by turning clockwise.
5. Reconnect power.
12
PROBLEM SOLVER
First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service
call, refer to the warranty page in this manual and scan the code there with your mobile device, or visit http://amana.custhelp.com.
In Canada, visit http://www.amanacanada.ca.
Contact us by mail with any questions or concerns at the address below:
In the U.S.A.:
Whirlpool Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
In Canada:
Whirlpool Brand Home Appliances
Customer eXperience Centre
200 - 6750 Century Ave.
Mississauga, Ontario L5N 0B7
Please include a daytime phone number in your correspondence
Problem Possible Causes and/or Solutions
Nothing will operate
Oven isn’t wired properly - See the Installation Instructions.
Household fuse is blown, or a circuit breaker is tripped - Replace the fuse, or reset the circuit breaker.
If the problem continues, call an electrician.
The control displays an F9 or F9 E0 error code - The electrical outlet in the home may be miswired.
Contact a qualified electrician to verify the electrical supply.
Oven will not operate
Delay Start is set - See the “Cook Time” section.
Control Lock is on - Press and hold CONTROL LOCK for 3 seconds to unlock.
Control is in Demo Mode - See the “Electronic Oven Controls” section. Demo Mode is used for display
models in a showroom.
Electronic oven control set incorrectly - See the “Electronic Oven Controls” section.
Oven temperature too
high or too low
Oven temperature needs adjustment - See “Oven Temperature Control” in the “Electronic
Oven Controls” section.
Display shows
messages
Power failure (display shows flashing time) - On some models, reset the clock, if needed.
See the “Clock” keypad feature in the “Feature Guide” section.
Error code (display shows letter followed by number) - Press OFF/CANCEL to clear the display.
See “Control Display” in the “Electronic Oven Controls” section. If it reappears, call for service.
See the “Warranty” section for contact information.
Cleaning cycle did not
work on all spills
Several cooking cycles between cleaning cycles or spills on oven walls and doors - Run additional
cleaning cycles. The affresh
®
Kitchen and Appliance Cleaner can be used for stubborn soils. See the
“Accessories” and “Self-Cleaning Cycle” sections for more information.
Oven cooking results
not what expected
The set temperature was incorrect - Double-check the recipe in a reliable cookbook.
Oven temperature needs adjustment - See “Oven Temperature Control” in the “Electronic
Oven Controls” section.
Oven was not preheated - See the “Baking and Roasting” section.
Racks were positioned improperly - See the “Positioning Racks and Bakeware” section.
Not enough air circulation around bakeware - See the “Positioning Racks and Bakeware” section.
Batter distributed unevenly in pan - Check that batter is level in the pan.
Darker browning of food caused by dull or dark bakeware - Lower the oven temperature 25°F (15°C)
or move rack to a higher position in the oven.
Lighter browning of food caused by shiny or light colored bakeware - Move rack to a lower position
in the oven.
Incorrect length of cooking time was used - Adjust cooking time.
Oven door was not closed - Be sure that the bakeware does not keep the door from closing.
Oven door was opened during cooking - Oven peeking releases oven heat and can result in longer
cooking times.
Rack is too close to bake burner, making baked items too brown on bottom - Move rack to higher
position in the oven.
Pie crusts browning too quickly - Use aluminum foil to cover the edge of the crust and/or reduce
baking temperature.
13
ACCESSORIES
For accessories in the U.S.A., you can visit our website at www.amana.com or call us at 1-800-843-0304.
In Canada, visit our website at www.amanacanada.ca or call us at 1-800-807-6777.
Granite Cleaner and Polish
Order Part Number W10275756
Porcelain Broiler Pan and Grid
Order Part Number 4396923
Premium Broiler Pan and Roasting Rack
Order Part Number W10123240
affresh
®
Stainless Steel Cleaning Wipes
(stainless steel models)
Order Part Number W10355049
affresh
®
Stainless Steel Cleaner
(stainless steel models)
Order Part Number W10355016
affresh
®
Kitchen and Appliance Cleaner
Order Part Number W10355010
14
11/14
IF YOU NEED SERVICE:
1. Before contacting us to arrange service, please determine whether your product requires repair. Some
questions can be addressed without service. Please take a few minutes to review the Troubleshooting or
Problem Solver section of the Use and Care Guide, scan the QR code on the right to access additional
resources, or visit http://amana.custhelp.com.
2. All warranty service is provided exclusively by our authorized Amana Service Providers. In the U.S. and
Canada, direct all requests for warranty service to:
Amana Customer eXperience Center
In the U.S.A., call 1-800-843-0304. In Canada, call 1-800-807-6777.
If outside the 50 United States or Canada, contact your authorized Amana dealer to determine whether another warranty applies.
AMANA
®
MAJOR APPLIANCE
LIMITED WARRANTY
ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS
REQUIRED TO OBTAIN WARRANTY SERVICE.
Please have the following information available when you call the
Customer eXperience Center:
Name, address and telephone number
Model number and serial number
A clear, detailed description of the problem
Proof of purchase including dealer or retailer name and address
ONE YEAR LIMITED WARRANTY
WHAT IS COVERED WHAT IS NOT COVERED
For one year from the date of purchase,
when this major appliance is installed,
operated and maintained according to
instructions attached to or furnished with
the product, Amana brand of Whirlpool
Corporation or Whirlpool Canada LP
(hereafter “Amana”) will pay for Factory
Specified Replacement Parts and repair
labor to correct defects in materials or
workmanship that existed when this
major appliance was purchased, or at
its sole discretion replace the product.
In the event of product replacement,
your appliance will be warranted for
the remaining term of the original unit’s
warranty period.
YOUR SOLE AND EXCLUSIVE REMEDY
UNDER THIS LIMITED WARRANTY
SHALL BE PRODUCT REPAIR AS
PROVIDED HEREIN. Service must be
provided by a Amana designated service
company. This limited warranty is valid
only in the United States or Canada and
applies only when the major appliance
is used in the country in which it was
purchased. This limited warranty is
effective from the date of original
consumer purchase. Proof of original
purchase date is required to obtain
service under this limited warranty.
1. Commercial, non-residential, multiple-family use, or use inconsistent with published user,
operator or installation instructions.
2. In-home instruction on how to use your product.
3. Service to correct improper product maintenance or installation, installation not in
accordance with electrical or plumbing codes or correction of household electrical or
plumbing (i.e. house wiring, fuses or water inlet hoses).
4. Consumable parts (i.e. light bulbs, batteries, air or water filters, preservation solutions, etc.).
5. Defects or damage caused by the use of non-genuine Amana parts or accessories.
6. Conversion of products from natural gas or L.P. gas.
7. Damage from accident, misuse, abuse, fire, floods, acts of God or use with products not
approved by Amana.
8. Repairs to parts or systems to correct product damage or defects caused by unauthorized
service, alteration or modification of the appliance.
9. Cosmetic damage including scratches, dents, chips, and other damage to the appliance
finishes unless such damage results from defects in materials and workmanship and is
reported to Amana within 30 days.
10. Discoloration, rust or oxidation of surfaces resulting from caustic or corrosive environments
including but not limited to high salt concentrations, high moisture or humidity or exposure
to chemicals.
11. Food or medicine loss due to product failure.
12. Pick-up or delivery. This product is intended for in-home repair.
13. Travel or transportation expenses for service in remote locations where an authorized
Amana servicer is not available.
14. Removal or reinstallation of inaccessible appliances or built-in fixtures (i.e. trim, decorative
panels, flooring, cabinetry, islands, countertops, drywall, etc.) that interfere with servicing,
removal or replacement of the product.
15. Service or parts for appliances with original model/serial numbers removed, altered or not
easily determined.
The cost of repair or replacement under these excluded circumstances shall be borne by
the customer.
DISCLAIMER OF IMPLIED WARRANTIES
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not
allow limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This warranty gives
you specific legal rights, and you also may have other rights that vary from state to state or province to province.
DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY
Amana makes no representations about the quality, durability, or need for service or repair of this major appliance other than the
representations contained in this warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes with
this major appliance, you should ask Amana or your retailer about buying an extended warranty.
LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. AMANA
SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the exclusion or
limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specific
legal rights, and you also may have other rights that vary from state to state or province to province.
http://amana.custhelp.com
15
MERCI d’avoir acheté ce produit de grande qualité. Enregistrer le four sur www.amanacanada.ca.
Pour référence ultérieure, consigner par écrit les numéros de modèle et de série de votre produit. Ces derniers peuvent
se trouver sous le panneau de commande.
Numéro de modèle _____________________________________ Numéro de série ________________________________________
Table des matières
INSTRUCTIONS D’UTILISATION
DU FOUR ÉLECTRIQUE
ENCASTRÉ
SÉCURITÉ DU FOUR ...................................................................16
GUIDE DES CARACTÉRISTIQUES .............................................18
UTILISATION DU FOUR ...............................................................20
Commandes électroniques du four ...........................................20
Mode Sabbat ..............................................................................21
Papier d’aluminium ....................................................................21
Positionnement des grilles et
des ustensiles de cuisson au four .............................................22
Évent du four ..............................................................................22
Cuisson au four et rôtissage ......................................................23
Cuisson au gril ............................................................................23
Maintien au chaud ......................................................................23
Favoris ........................................................................................24
Cuisson et maintien au chaud ...................................................24
Durée de cuisson .......................................................................25
ENTRETIEN DU FOUR .................................................................26
Programme d’autonettoyage .....................................................26
Nettoyage général ......................................................................27
Lampes du four ..........................................................................27
RÉSOLUTION DE PROBLÈMES .................................................28
ACCESSOIRES .............................................................................29
GARANTIE .....................................................................................30
16
SÉCURITÉ DU FOUR
Risque possible de décès ou de blessure grave si vous ne
suivez pas immédiatement les instructions.
Risque possible de décès ou de blessure grave si vous
ne suivez pas les instructions.
Tous les messages de sécurité vous diront quel est le danger potentiel et vous disent comment réduire le risque de blessure et
ce qui peut se produire en cas de non-respect des instructions.
Votre sécurité et celle des autres est très importante.
Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager. Assurez-vous de
toujours lire tous les messages de sécurité et de vous y conformer.
AVERTISSEMENT
DANGER
Voici le symbole d’alerte de sécurité.
Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves à vous
et à d’autres.
Tous les messages de sécurité suivront le symbole d’alerte de sécurité et le mot “DANGER” ou
“AVERTISSEMENT”. Ces mots signifient :
CONSERVEZ CES INSTRUCTIONS
IMPORTANTES INSTRUCTIONS DE SÉCURITÉ
AVERTISSEMENT : Pour réduire le risque d’incendie, de
choc électrique, de blessures corporelles ou de dommages
lors de l’utilisation du four, il convient d’observer certaines
précautions élémentaires dont les suivantes :
Installation appropriée S’assurer que le four est
convenablement installé et relié à la terre par un technicien
qualifié.
Ne jamais utiliser le four pour chauffer ou réchauffer
une pièce.
Ne pas laisser les enfants seuls Les enfants ne doivent
pas être laissés seuls ou sans surveillance dans la pièce
le four est en service. Ne jamais laisser les enfants
s’asseoir ou se tenir sur une partie quelconque du four.
Porter des vêtements appropriés – Les vêtements amples
ou détachés ne doivent jamais être portés pendant
l’utilisation du four.
Entretien par l’utilisateur Ne pas réparer ni remplacer
toute pièce du four si ce n’est pas spécifiquement
recommandé dans le manuel. Toute autre opération
d’entretien ou de réparation doit être confiée à un
technicien qualifié.
Ne pas utiliser d’eau pour éteindre un feu de graisse
Étouffer le feu ou les flammes ou utiliser des extincteurs
polyvalents à produits chimiques secs ou un extincteur à
mousse.
Utiliser seulement des mitaines sèches de four Des
mitaines de four mouillées ou humides sur des surfaces
chaudes peuvent provoquer des brûlures provenant de la
vapeur. Ne pas laisser les mitaines de four toucher les
éléments chauffants. Ne pas utiliser une serviette ou un
tissu épais.
Exercer une grande prudence lors de l’ouverture de la
porte. Laisser l’air chaud ou la vapeur s’échapper avant
d’enlever ou de remplacer un plat.
Ne pas faire chauffer des contenants fermés
L’accumulation de pression peut causer une explosion du
contenant et des blessures.
Ne jamais obstruer les ouvertures des évents.
Placement des grilles du four – Toujours placer les grilles
du four à l’endroit désiré, lorsque le four est froid. Si la
grille doit être déplacée lorsque le four est chaud, ne pas
laisser des mitaines de four toucher l’élément chauffant
dans le four.
Remisage dans le four – Des matériaux inflammables ne
doivent pas être remisés dans un four.
NE PAS TOUCHER LES ÉLÉMENTS CHAUFFANTS OU
LES SURFACES INTÉRIEURES DU FOUR – les éléments
chauffants peuvent être chauds
même s’ils ont une teinte
foncée. Les surfaces intérieures de four deviennent assez
chaudes pour causer des brûlures. Pendant et après
l’utilisation, ne pas toucher ou laisser des vêtements ou
autres matériaux inflammables venir en contact avec les
éléments chauds ou les surfaces intérieures chaudes du
four avant qu’ils aient eu assez de temps pour refroidir.
D’autres surfaces du four peuvent devenir assez chaudes
pour causer des brûlures. Ces surfaces comprennent les
ouvertures de l’évent du four et la surface près de ces
ouvertures, les portes du four et les hublots des portes
du four.
Fours autonettoyants :
Ne pas nettoyer le joint de la porte – Le joint de la porte est
essentiel pour l’étanchéité. Veiller à ne pas frotter,
endommager ou déplacer le joint.
Ne pas utiliser les produits commerciaux de nettoyage de
four – On ne doit pas utiliser un produit commercial de
nettoyage de four ou un enduit de protection des surfaces
internes du four quel qu’en soit le type, sur les surfaces du
four ou les surfaces voisines.
Nettoyer uniquement les pièces indiquées dans le manuel.
Avant d’exécuter le programme d’autonettoyage du four,
enlever la lèchefrite et sa grille et les autres ustensiles.
17
Avertissements de la proposition 65 de l'État de Californie :
AVERTISSEMENT : Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de
cancers.
AVERTISSEMENT : Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de
malformations et autres déficiences de naissance.
18
GUIDE DES CARACTÉRISTIQUES
Ce manuel couvre différents modèles. Le modèle que vous avez peut comporter toutes les caractéristiques énumérées
ou seulement certaines d’entre elles. Consulter ce manuel ou la section d’aide à la clientèle sur www.amanacanada.ca
pour des instructions plus détaillées. Pour obtenir plus d’information sur une caractéristique ou sur les étapes pour utiliser les
caractéristiques mentionnées, consulter la section titre de la caractéristique.
Touche Caractéristique Instructions
CLOCK (horloge) Horloge
Cette horloge peut utiliser un programme de 12 ou 24 heures. Voir la section
“Commandes électroniques du four”.
1. Appuyer sur CLOCK (horloge) jusqu’à afficher “Clock” (horloge).
2. Appuyer sur les touches numériques pour régler l’heure du jour.
3. Appuyer sur START (mise en marche).
LIGHT
(lampe du four)
Lampe de la
cavité du four
Alors que la(les) porte(s) du four sont fermées, appuyer sur LIGHT (lampe du
four) pour allumer ou éteindre la(les) lampe(s). La(Les) lampe(s) du four s’allument
à l’ouverture de la porte.
TIMER ON•OFF
(marche•arrêt
de la minuterie)
Minuterie du four
La minuterie peut être réglée en heures ou en minutes jusqu’à concurrence de 9 heures
et 59 minutes.
1. Appuyer sur TIMER ON•OFF (marche•arrêt de la minuterie).
2. Appuyer sur les touches numériques pour régler la durée en hr-min. Les zéros
de gauche peuvent ne pas être entrés. Entrer “2” pour 2 minutes par exemple.
3. Appuyer sur TIMER ON•OFF (marche•arrêt de la minuterie) pour commencer le compte
à rebours. Si activés, le(les) signal(signaux) sonore(s) de la minuterie retentissent à la fin
du compte à rebours.
4. Appuyer sur TIMER ON•OFF (marche•arrêt de la minuterie) pour annuler la minuterie
et revenir à l’heure du jour. Ne pas appuyer sur OFF/CANCEL (arrêt/annulation), sinon
le four s’éteindra.
START
(mise en marche)
Démarrage
de la cuisson
La touche Start (mise en marche) met en marche n’importe quelle fonction du four.
Si, après avoir appuyé sur une touche, on n’appuie pas sur Start (mise en marche)
dans les 2 minutes qui suivent, la fonction est annulée et l’heure s’affiche.
OFF/CANCEL
(arrêt/annulation)
Fonction du four
La touche Off/Cancel (arrêt/annulation) désactive toutes les fonctions du four à l'exception
de l'horloge, de la minuterie et du verrouillage des commandes du four.
BAKE
(cuisson au four)
Cuisson au four
et rôtissage
1. Appuyer sur BAKE (cuisson au four).
2. Utiliser les touches numériques pour régler la température souhaitée. Si la température
entrée ne se trouve pas dans la fourchette des températures autorisées, la température
minimale ou maximale autorisée s’affiche. Entrer une température dans la fourchette
autorisée.
3. (Cuisson au four sur une seule grille uniquement) Appuyer sur START (mise en marche).
Le préchauffage rapide démarre.
IMPORTANT : La fonction de préchauffage rapide doit être utilisée uniquement
pour la cuisson au four sur une seule grille.
4. (Cuisson au four sur plusieurs grilles) Appuyer sur START (mise en marche). Appuyer
de nouveau sur la touche START (mise en marche) pour annuler le préchauffage rapide.
5. Pour modifier la température, répéter les étapes 2 et 3.
6. Appuyer sur OFF/CANCEL (arrêt/annulation) après avoir terminé.
AVERTISSEMENT
Risque d'empoisonnement alimentaire
Ne pas laisser des aliments dans un four plus d'une
heure avant ou après la cuisson.
Le non-respect de cette instruction peut causer un
empoisonnement alimentaire ou une maladie.
19
Touche Caractéristique Instructions
BROIL
(cuisson au gril)
Cuisson au gril
1. Appuyer sur BROIL (cuisson au gril).
2. Utiliser les touches numériques pour régler la température souhaitée. Si la température
entrée ne se trouve pas dans la fourchette des températures autorisées, la température
minimale ou maximale autorisée s’affiche. Entrer une température dans la fourchette
autorisée.
3. Appuyer sur START (mise en marche), et laisser le four préchauffer pendant 5 minutes.
4. Placer les ustensiles de cuisine dans le four et fermer la porte du four.
5. Pour modifier la température, répéter les étapes 2 et 3.
6. Appuyer sur OFF/CANCEL (arrêt/annulation) après avoir terminé.
FAVORITE
(recette favorite)
Recette favorite
sauvegardée
La caractéristique Favori permet de sauvegarder les réglages de durée et de température
de n’importe quelle fonction de cuisson active. Pour sauvegarder et employer la recette
favorite, consulter la section “Recette favorite”.
KEEP WARM
(maintien
au chaud)
Maintien au chaud
Les aliments doivent être à la température de service avant d’être placés
dans le four chaud.
1. Appuyer sur KEEP WARM (maintien au chaud).
2. Utiliser les touches numériques pour régler la température souhaitée. Si la température
entrée ne se trouve pas dans la fourchette des températures autorisées, la température
minimale ou maximale autorisée s’affiche. Entrer une température dans la fourchette
autorisée.
3. Appuyer sur START (mise en marche).
4. Pour changer la température, répéter les étapes 2 et 3.
5. Appuyer sur OFF/CANCEL (arrêt/annulation) après avoir terminé.
DELAY START
(mise en marche
différée)
Mise en marche
différée
La touche Delay Start (mise en marche différée) sert à entrer l’heure de mise en marche
pour un four équipé d’une fonction de mise en marche différée. Le mise en marche
différée ne doit pas être utilisée pour les aliments tels que pains et gâteaux, car ils
risquent de ne pas bien cuire.
Pour régler une cuisson minutée ou une cuisson minutée différée, voir la section
“Durée de cuisson”.
COOK TIME
(durée de cuisson)
Cuisson minutée
La fonction de durée de cuisson permet d’allumer le four à une certaine heure de
la journée, d’effectuer une cuisson pendant une durée déterminée et/ou d’éteindre
le four automatiquement.
Pour régler une cuisson minutée ou une cuisson minutée différée, voir la section
“Durée de cuisson”.
COOK & HOLD
(cuisson et
maintien au
chaud)
Cuisson minutée
et maintien
au chaud
La fonction Cook & Hold (cuisson et maintien au chaud) permet de régler une cuisson
au four pendant une durée déterminée suivie d’un programme de maintien au chaud
d’une (1) heure.
Pour régler une cuisson et maintien au chaud ou une cuisson différée et maintien au chaud,
voir la section “Cuisson et maintien au chaud”.
SELF CLEAN
(autonettoyage)
Programme
d'autonettoyage
Voir la section “Programme d’autonettoyage”.
CONTROL LOCK
hold 3 sec.
(commandes
verrouillées
appuyer pendant
3 sec.)
Verrouillage
des commandes
du four
1. Vérifier que toutes les fonctions du four et de la table de cuisson sont désactivées,
y compris les fonctions de minuterie et de cuisson minutée.
2. Appuyer sans relâcher sur CONTROL LOCK (commandes verrouillées) pendant
3 secondes.
3. Si cette fonction est activée, un signal sonore retentit et les commandes
sont verrouillées.
4. Répéter pour déverrouiller. Aucune touche ne fonctionne lorsque les commandes
sont verrouillées.
SETTINGS
(réglages)
Fonctions
d'utilisation
du four
Permet de personnaliser les signaux sonores audibles et le fonctionnement du four
pour convenir à vos besoins. Voir la section “Utilisation du four”.
20
UTILISATION DU FOUR
Des odeurs et de la fumée sont normales lorsque le four
est utilisé la première fois, ou lorsqu’il est très sale.
IMPORTANT : Certains oiseaux sont très sensibles aux
émanations de fumée. L’exposition aux émanations peut
entraîner la mort de certains oiseaux. Toujours déplacer
les oiseaux dans une autre pièce fermée et bien aérée.
Commandes électroniques du four
Affichage des commandes
L’affichage clignote lorsqu’il est mis en marche ou après
une coupure de courant. Lorsque le four n’est pas en marche,
l’heure du jour est affichée.
Signaux sonores
Les signaux sonores indiquent ce qui suit :
Un seul signal sonore
Appui sur une touche valide.
Le four est préchauffé (signal sonore long).
Minuteur de cuisine (signal sonore long avec signal sonore
de rappel toutes les 60 secondes).
Fonction entrée.
Trois signaux sonores
Appui sur une touche non valide
Quatre signaux sonores
Fin de programme (avec signal sonore de rappel toutes
les 60 secondes).
Appuyer sur la touche Settings (réglages) pour modifier
les réglages des signaux sonores.
Réglages
De nombreuses caractéristiques du module de commande du four
peuvent être ajustées pour répondre à vos besoins. On effectue
ces changements à l’aide de la touche Settings (réglages).
Utiliser la touche Settings (réglages) pour faire défiler les
caractéristiques qui peuvent être modifiées. L’affichage passe
au réglage suivant à chaque pression supplémentaire sur Settings
(réglages). Après avoir sélectionné la caractéristique à modifier,
le tableau de commande demande à l’utilisateur d’effectuer la
manœuvre nécessaire. Les sections suivantes détaillent toutes
les modifications de caractéristiques.
Appuyer sur OFF/CANCEL (arrêt/annulation) pour sortir
du mode Settings (réglages).
Fahrenheit et Celsius
Le four est préréglé pour un affichage de la température en degrés
Fahrenheit, mais on peut le permuter en degrés Celsius.
1. Appuyer sur SETTINGS (réglages) jusqu’à ce que
“TEMP UNIT” (unité de température) s’affiche.
2. Le réglage utilisé à ce moment-là s’affiche.
3. Appuyer sur la touche “1” pour modifier le réglage.
4. Appuyer sur OFF/CANCEL (arrêt/annulation) pour quitter
ce mode et afficher l’heure.
Désactivation des signaux sonores
Désactive la majorité des signaux sonores, y compris le signal
sonore de fin de programme et les signaux sonores d’appui sur
une touche. Les signaux sonores de rappel restent actifs lorsque
les sons sont désactivés.
1. Appuyer sur SETTINGS (réglages) jusqu’à ce que “SOUND”
(signaux sonores) s’affiche.
2. Le réglage utilisé à ce moment-là s’affiche.
3. Appuyer sur la touche “1” pour modifier le réglage.
4. Appuyer sur OFF/CANCEL (arrêt/annulation) pour quitter
ce mode et afficher l’heure.
Volume sonore
Règle le timbre du signal sonore à bas ou élevé.
1. Appuyer sur SETTINGS (réglages) jusqu’à ce que
“SOUND VOLUME” (volume sonore) s’affiche.
2. Le réglage utilisé à ce moment-là s’affiche.
3. Appuyer sur la touche “1” pour modifier le réglage.
4. Appuyer sur OFF/CANCEL (arrêt/annulation) pour quitter
ce mode et afficher l’heure.
Signal sonore de fin de programme
Active ou désactive les signaux sonores qui retentissent
à la fin d’un programme.
1. Appuyer sur SETTINGS (réglages) jusqu’à ce que “END TONE”
(signal de fin) s’affiche.
2. Le réglage utilisé à ce moment-là s’affiche.
3. Appuyer sur la touche “1” pour modifier le réglage.
4. Appuyer sur OFF/CANCEL (arrêt/annulation) pour quitter
ce mode et afficher l’heure.
Signaux sonores d’appui sur une touche
Active ou désactive les signaux sonores lorsqu’on appuie
sur une touche.
1. Appuyer sur SETTINGS (réglages) jusqu’à ce que “KEYPRESS
TONE” (signal de pression sur une touche) s’affiche.
2. Le réglage utilisé à ce moment-là s’affiche.
3. Appuyer sur la touche “1” pour modifier le réglage.
4. Appuyer sur OFF/CANCEL (arrêt/annulation) pour quitter
ce mode et afficher l’heure.
Désactivation des signaux sonores de rappel
Désactive les courts signaux sonores qui retentissent toutes
les minutes après les signaux sonores de fin de programme.
1. Appuyer sur SETTINGS (réglages) jusqu’à ce que
“REMINDER TONE” (signal de rappel) s’affiche.
2. Le réglage utilisé à ce moment-là s’affiche.
3. Appuyer sur la touche “1” pour modifier le réglage.
4. Appuyer sur OFF/CANCEL (arrêt/annulation) pour quitter
ce mode et afficher l’heure.
Horloge 12/24 heures
1. Appuyer sur SETTINGS (réglages) jusqu’à ce que
“12/24 HOUR” s’affiche.
2. Le réglage utilisé à ce moment-là s’affiche.
3. Appuyer sur la touche “1” pour modifier le réglage.
4. Appuyer sur OFF/CANCEL (arrêt/annulation) pour quitter
ce mode et afficher l’heure.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Amana AWO6317SFS AWO6317SFS Use and Care EN

Catégorie
Cuisinières
Taper
AWO6317SFS Use and Care EN

dans d''autres langues