5095-0
SINGLE-GANG DEVICE COVER
Cubierta de Perforación Sencilla
Couvercle pour Boîte Simple
GENERAL INSTRUCTIONS
IMPORTANT: Mount cover with
hinge on top.
1. Turn off power.
2. Use only copper wire.
3. Remove appropriate device cutout
on gasket.
4. Center cover gasket evenly.
5. Install mounting screws (provided).
6. Use caulking around cover if not
mounted to a U.L. listed wet locations
box.
7. Installation and wiring must comply
with local electrical codes.
LISTED 22F0
FLUSH DEVICE COVER
WET LOCATIONS
WITH COVER CLOSED
LISTADA 22F0
TAPA PARA
DISPOSITIVO AL RAS
SITIOS MOJADOS CON
LA TAPA CERRADA
ENREGISTRER 22F0
COUVERCLE DE
DISPOSITIF AFFLEURANT
ENDROITS MOUILLÉS SI
LE COUVERCLE EST FERMÉ
INSTRUCCIONES AL DORSO
INSTRUCTIONS AU DOS
HUBBELL ELECTRICAL PRODUCTS
DIVISION OF HUBBELL INCORPORATED (DELAWARE)
P.O. BOX 4002 SOUTH BEND, INDIANA 46634
CANADA 870 BROCK RD. S. PICKERING, ON L1W 1Z8
MADE IN INDIA / HECHO EN INDIA / FAIT DANS L'INDE
Vertical Duplex Receptacle
Box Mount
Tomacorriente Vertical Doble
- Placa De Caja
Prise Double Verticale
-Montage en Boîte
0 50169 50950 0
-
1
dans d''autres langues
- English: Bell 5095-0 Installation guide
Documents connexes
-
Bell 5146-0 Guide d'installation
-
-
-
-
-
-
Bell 5103-2 Guide d'installation
-
-
-