Samsung RF26J7510SR Manuel utilisateur

Refrigerator

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

RF26J75**

Free Standing Appliance

DA68-02601D-05.indb 1 2020. 7. 24. 오후 5:41

English - 2

Safety information

SAFETY INFORMATION

Before using your new Samsung French Door

Refrigerator, please read this manual thoroughly to

ensure that you know how to operate the features

and functions that your new appliance offers safely

and efﬁciently.

This appliance is not intended for use by persons

(including children) with reduced physical,

sensory, or mental capabilities, or those who lack

experience and knowledge, unless they have been

given supervision or instruction concerning the use

of the appliance by a person responsible for their

safety.

Because the following instructions cover various

models, the characteristics of your refrigerator may

differ slightly from the refrigerator described in this

manual.

If you have any question, contact us at

1-800-SAMSUNG or ﬁnd help and information

online at www.samsung.com.

Warning; Risk of

ﬁre / ﬂammable

materials

Important safety symbols and

precautions:

WARNING

Hazards or unsafe practices that may result in

severe personal injury or death.

CAUTION

Hazards or unsafe practices that may result in

minor personal injury or property damage.

Do NOT attempt.

Do NOT disassemble.

Do NOT touch.

Follow directions carefully.

Unplug the power plug from the wall

socket.

Make sure the refrigerator is grounded to

prevent electric shock.

Call the contact center for help.

Note.

These warning symbols are here to prevent

injury to you and others.

Please follow them carefully.

After reading this section, keep it in a safe

place for future reference.

WARNING

State of California Proposition

65 Warning

• Cancer and Reproductive Harm -

www.P65Warnings.ca.gov.

WARNING

• Fill with potable water only.

• Keep ventilation openings, in the appliance

enclosure or in the built-in structure, clear of

obstruction.

• Do not use mechanical devices or other

Contents

SAFETY INFORMATION ……………………………………………………………… 2

SETTING UP YOUR FRENCH DOOR REFRIGERATOR …………………………9

OPERATING YOUR FRENCH DOOR REFRIGERATOR ……………………… 18

TROUBLESHOOTING ……………………………………………………………… 38

DA68-02601D-05.indb 2 2020. 7. 24. 오후 5:41

English - 3

SAFETY INFORMATION

means to accelerate the defrosting process,

other than those recommended by the

manufacturer.

• Do not damage the refrigerant circuit.

• Do not use electrical appliances inside the

food storage compartments of The appliance,

unless they are of the type recommended by

the manufacturer.

• Connect to potable water supply only.

• This appliance is intended to be used in

household and similar applications such as

- sta kitchen areas in shops, oces and other

working environments;

- farm houses and by clients in hotels, motels

and other residential type environments;

- bed and breakfast type environments;

- catering and similar non-retail applications.

WARNING

CRITICAL INSTALLATION

WARNINGS

• Do not install the refrigerator in a damp

location or place where it may come in

contact with water.

- Deteriorated insulation on electrical parts may

cause an electric shock or ﬁre.

• Do not place this refrigerator in direct sunlight

or expose it to the heat from stoves, room

heaters, or other appliances.

• Do not plug several appliances into the same

multiple power strip.

The refrigerator should always be plugged into

its own individual electrical outlet which has a

voltage rating that matches the voltage listed

on the refrigerator’s rating plate.

- This provides the best performance and

also prevents overloading of house wiring

circuits, which could cause a ﬁre hazard from

overheated wires.

• If the wall socket is loose, do not insert the

power plug.

- There is a risk of electric shock of ﬁre.

• Do not use a power cord that has cracks or

abrasion damage along its length or at either

end.

• Do not bend the power cord excessively or

place heavy objects on it.

• Do not twist or tie the power cord.

• Do not hook the power cord over a metal

object, place a heavy object on the power

cord, insert the power cord between objects, or

push the power cord into the space behind the

appliance.

• When moving the refrigerator, be careful not to

roll over or damage the power cord.

- This may result in an electric shock or ﬁre.

• Never unplug your refrigerator by pulling on the

power cord.

Always grip the plug ﬁrmly and pull straight out

from the outlet.

- Damage to the cord may cause a short-circuit,

ﬁre, and/or electric shock.

• Do not use aerosols near the refrigerator.

- Using aerosols near the refrigerator may cause

an explosion or ﬁre.

• Do not install this appliance near a heater or

inﬂammable material.

• Do not install this appliance in a humid, oily,

or dusty location, or in a location exposed to

direct sunlight or water (rain, etc.).

• Do not install this appliance in a location where

gas may leak.

- This may result in an electric shock or ﬁre.

- Keep the ventilation space in the appliance

enclosure or mounting structure clear of

obstructions.

• This refrigerator must be properly

located and installed in accordance

with the instructions in this manual

before you use it.

• Connect the power plug in the proper position

with the cord hanging down.

- If you connect the power plug upside down, the

wire can get cut o and cause a ﬁre or electric

shock.

• When moving the refrigerator, be careful not to

roll over or damage the power cord.

- This constitutes a ﬁre hazard.

• Make sure that the power plug is not crushed

or damaged by the back of the refrigerator.

• Keep the packing materials out of reach of

children.

- There is a risk of death from suocation if a

child puts the packing materials on his or her

head.

• The appliance must be positioned so that the

plug is accessible after installation.

- Failing to do so may result in an electric shock

or ﬁre due to electric leakage.

• You need to remove all the protective plastic

ﬁlm before you initially plug the product in.

DA68-02601D-05.indb 3 2020. 7. 24. 오후 5:41

English - 4

• Children should be supervised to ensure that

they do not play with the fastener.

- There is a risk of death from suocation if a

child swallows the fastener.

Pay special attention to children because it can

be dangerous.

Keep the fastener out of reach of children.

• The refrigerator must be safely

grounded.

- Always make sure that you have grounded the

refrigerator before attempting to investigate or

repair any part of the appliance.

Power leakages can cause severe electric

shock.

• Never use gas pipes, telephone lines, or other

potential lightning attractors as an electrical

ground.

- Improper use of the grounding plug can result

in a risk of electric shock.

If it is necessary to use an extension cord, use

only a 3-wire extension cord that has a 3-blade

grounding plug and a 3-slot receptacle that will

accept the plug on the appliance.

The marked rating of the extension cord should

be AC 115-120 V, 10 A, or more.

If a grounding adapter is used, make sure the

receptacle box is fully grounded.

• Plug the power plug into the wall socket ﬁrmly.

Do not use a damaged power plug, damaged

power cord, or loose wall socket.

- This may result in an electric shock or ﬁre.

• The socket must be easily accessible so that

the appliance can be quickly disconnected

from the supply in an emergency. It must be

outside the area of the rear of the appliance.

• If the power cord is damaged,

have it replaced immediately by the

manufacturer or one of its service

agents.

CAUTION

INSTALLATION CAUTIONS

• Allow sucient space around the

refrigerator and install it on a ﬂat

surface.

- If your refrigerator is not level, cooling eciency

and durability can be declined.

• Allow the appliance to stand for 2 hours before

loading foods after installation and turning on.

- When installing the refrigerator, make sure both

legs contact the ﬂoor for secure installation.

Legs are located at the bottom back of freezer

door.

Insert a ﬂathead screwdriver and turn it in the

direction of the arrow until it is level.

- Always balance the load on each door.

- Overload on any one door may fell the

refrigerator, causing physical injury.

• We strongly recommend you have a qualiﬁed

technician or service company install the

refrigerator.

- Failing to do so may result in an electric shock,

ﬁre, explosion, problems with the product, or

injury.

WARNING

CRITICAL USAGE WARNINGS

• Do not insert the power plug into a wall

socket with wet hands.

• Do not store articles on the top of the

appliance.

- When you open or close the door, the articles

may fall and cause personal injury and/or

material damage.

• Do not insert hands, feet or metal objects (such

as knives, etc.) into the bottom or the back of

the refrigerator.

- This may result in an electric shock or injury.

- Any sharp edges may cause a personal injury

• Do not put a container ﬁlled with water on the

refrigerator.

- If spilled, there is a risk of ﬁre or electric shock.

• Children should be supervised to ensure that

they do not play with the appliance.

DA68-02601D-05.indb 4 2020. 7. 24. 오후 5:41

English - 5

SAFETY INFORMATION

- Keep ﬁngers out of “pinch point” areas.

Clearances between the doors and cabinet are

necessarily small. Be careful when you open

the doors if children are in the area.

• Do not let children hang on the door.

A serious injury may occur.

• Do not let children go inside the refrigerator.

They could become trapped.

• Do not insert your hands into the bottom area

under the appliance.

- Any sharp edges may cause personal injury.

• Do not let children step on a drawer cover.

- The drawer may break and cause them to slip.

• Do not overﬁll the refrigerator with food.

- When you open the door, an item may fall out

and cause personal injury or material damage.

• Do not touch the inside walls of the freezer or

products stored in the freezer with wet hands.

- This may cause frostbite.

• Never put ﬁngers or other objects into the water

dispenser hole, ice chute, or ice maker bucket.

- It may cause personal injury or material

damage.

• Do not use or place any substances sensitive

to temperature such as inﬂammable sprays,

inﬂammable objects, dry ice, medicine, or

chemicals near or inside the refrigerator.

• Do not keep volatile or inﬂammable objects

or substances (benzene, thinner, propane

gas, alcohol, ether, LP gas, and other such

products) in the refrigerator.

- This refrigerator is for storing food only.

- This may result in ﬁre or explosion.

• Do not store explosive substances such as

aerosol cans with a ﬂammable propellant in this

appliance.

• Do not store pharmaceutical products, scientiﬁc

materials, or temperature sensitive products in

the refrigerator.

- Products that require strict temperature

controls must not be stored in the refrigerator.

• Do not place or use an electrical appliance

inside the refrigerator, unless it is of a type

recommended by the manufacturer.

• Do not stand on top of the appliance or place

objects (such as laundry, lighted candles,

lighted cigarettes, dishes, chemicals, metal

objects, etc.) on the appliance.

This may result in an electric shock, ﬁre,

problems with the product, or injury.

Do not put a container ﬁlled with water on the

appliance.

- If spilled, there is a risk of ﬁre or electric shock.

• Do not use mechanical devices or any other

means to accelerate the defrosting process,

other than those recommended by the

manufacturer.

• Do not damage the refrigerant circuit.

• Do not spray volatile material such as

insecticide onto the surface of the appliance.

- As well as being harmful to humans, it may also

result in an electric shock, ﬁre, or problems with

the product.

• Never stare directly at the UV LED lamp for long

periods of time.

- This may result in eye strain due to the

ultraviolet rays.

• Do not attempt to repair, disassemble,

or modify the appliance yourself.

• Do not use any fuse (such as cooper, steel wire,

etc.) other than a standard fuse.

• If your appliance needs to be repaired or

reinstalled, contact your nearest service center.

- Failing to do so may result in an electric shock,

ﬁre, problems with the product, or injury.

• If the interior or exterior LED lamp has gone

out, please contact your nearest service center.

• Children should be supervised to

ensure that they do not play with the

appliance.

- Keep ﬁngers out of “pinch point” areas. :

Clearances between the doors and cabinet are

necessarily small.

Be careful when you open the doors if children

are in the area.

• Do not let children hang on the door.

A serious injury may occur.

• Do not let children go inside the refrigerator.

They could become trapped.

• Bottles should be stored tightly together so that

they do not fall out.

• This product is intended only for the storage of

food in a domestic environment.

• If a gas leak is detected, avoid any naked

ﬂames or potential sources of ignition, and air

the room in which the appliance is standing for

several minutes.

- Do not touch the appliance or power cord.

- Do not use a ventilating fan.

- A spark may result in an explosion or ﬁre.

• Use only the LED Lamps provided by the

manufacturer or its service agents.

DA68-02601D-05.indb 5 2020. 7. 24. 오후 5:41

English - 6

• If the refrigerator emits a burning smell

or smoke, unplug the refrigerator

immediately and contact your

Samsung Electronics service center.

• If you experience diculty changing a non-LED

light, contact a Samsung service center.

• If the product is equipped with LED Lamps, do

not disassemble the Lamp Covers and LED

Lamps yourself.

- Please contact your service agents.

• If dust or water enters the refrigerator, unplug

the refrigerator and contact your Samsung

Electronics service center.

- There is a risk of ﬁre.

CAUTION

USAGE CAUTIONS

• Do not re-freeze frozen foods that have

thawed completely.

Do not place carbonated or ﬁzzy drinks

in the freezer compartment.

Do not put bottles or glass containers

in the freezer.

- When the contents freeze, the glass may break

and cause personal injury.

• Use only the ice maker provided with the

refrigerator.

• Have the refrigerator’s water supply connected

only to a potable water supply.

To operate the ice maker properly, water

pressure of 20 ~ 125 psi (138 ~ 862 kPa) is

required. If you will be away from home for a

long period of time (on vacation, for example)

and won’t be using the water or ice dispensers,

close the water valve.

- Otherwise, water leakage may occur.

• If you won’t be using the refrigerator for a very

long period of time, (3 weeks or more) empty

the refrigerator including ice bucket, unplug it,

close the water valve, wipe excess moisture

from the inside walls, and leave the doors open

to prevent odors and mold.

• Service Warranty and Modiﬁcation.

• Any changes or modiﬁcations

performed by a 3rd party on this

ﬁnished appliance are not covered

under Samsung warranty service, nor is

Samsung responsible for safety issues

that result from 3rd party modiﬁcations.

• Do not block the air vents inside the refrigerator.

- If the air vents are blocked, especially with a

plastic bag, the refrigerator can be over cooled.

If this cooling period lasts too long, the water

ﬁlter may break and cause water leakage.

• If the refrigerator is disconnected from the

power supply, you should wait for at least ﬁve

minutes before plugging it back in.

• If you have a long vacation planned or do not

intend to use the refrigerator for a long period of

time, (3 weeks or more) empty the refrigerator

including ice bucket, pull out the power plug,

close the water valve, wipe excess moisture

from the inside walls, and leave the doors open

to prevent odors and mold.

• To get the best performance from the product:

- Do not place food too close to the vents at the

rear of the appliance as it can obstruct free air

circulation in the refrigerator compartment.

- Wrap food up properly or place it in airtight

containers before putting it into the refrigerator.

- Do not place glasses, bottles, or carbonated

beverages in the freezer.

These items may freeze and break.

Broken glasses, bottles, and beverage

containers can cause injury.

- Please observe maximum storage times and

expiration dates of frozen goods.

- There is no need to disconnect the refrigerator

from the power supply if you will be away for

less than three weeks.

However, if you will be away for more than three

weeks, remove all the food and ice in the ice

bucket, unplug the refrigerator, close the water

valve, wipe excess moisture from the inside

walls, and leave the doors open to prevent

odors and mold.

- Do not ﬁll the tank with tea or a Sports drink.

This may damage the refrigerator.

• Do not strike or apply excessive force to any

glass surface.

- Broken glass may result in a personal injury

and/or property damage.

• If the product is ﬂooded, make sure to

contact your nearest service center.

- There is a risk of electric shock or ﬁre.

• Do not keep vegetable oil in your refrigerator’s

door bins. The oil can solidify, making it

foul-tasting and dicult to use. In addition, the

open container can leak and the leaked oil can

DA68-02601D-05.indb 6 2020. 7. 24. 오후 5:41

English - 7

SAFETY INFORMATION

cause the door bin to crack. After opening an

oil container, it is best to keep the container in

a cool and shaded place such as a cupboard

or pantry.

- Examples of vegetable oil: olive oil, corn oil,

grape-seed oil, etc.

CAUTION

CLEANING CAUTIONS

• Do not spray water directly on the

inside or outside the refrigerator.

- There is a risk of ﬁre or electric shock.

• Do not use a hair dryer to dry the inside of the

refrigerator.

• Do not place a lighted candle in the refrigerator

to remove bad odors.

- This may result in an electric shock or ﬁre.

• Use a clean, dry cloth to remove any

foreign matter or dust from the power

plug blades.

Do not use a wet or damp cloth when

cleaning the plug.

- Otherwise, there is a risk of ﬁre or electric

shock.

• Before cleaning or performing

maintenance, unplug the appliance

from the wall socket.

- Failing to do so may result in an electric shock

or ﬁre.

• Use a clean sponge or soft cloth and a mild

detergent in warm water to clean the

refrigerator.

• Do not use abrasive or harsh cleansers such

as window sprays, scouring cleansers,

ﬂammable ﬂuids, muriatic acid, cleaning waxes,

concentrated detergents, bleaches, or

cleansers containing petroleum products on

exterior surfaces (doors and cabinet), plastic

parts, door and interior liners, and gaskets.

- These can scratch or damage the material.

• Do not clean glass shelves or covers with warm

water when they are cold. Glass shelves and

covers may break if exposed to sudden

temperature changes or impacts such as

bumping or dropping.

WARNING

CRITICAL DISPOSAL WARNINGS

• Risk of child entrapment. Before you

throw away your old refrigerator or

freezer:

- Take o the doors and door latch.

- Leave the shelves in place so that children

cannot easily climb inside.

- Children trapped inside a refrigerator can hurt

themselves or suocate to death.

• Please dispose of the packaging material from

this product in an environmentally friendly

manner.

• Ensure that none of the pipes on the back of

the appliance are damaged prior to disposal.

• R-600a or R-134a is used as a refrigerant.

Check the compressor label on the rear of

the appliance or the rating label inside the

fridge to see which refrigerant is used for your

refrigerator.

If this product contains ﬂammable gas

(Refrigerant R-600a), contact your local

authority in regard to safe disposal of this

product.

• When disposing of this refrigerator, remove the

door/door seals and door latch so that small

children or animals cannot become trapped

inside.

Children should be supervised to ensure that

they do not play with the appliance.

If trapped inside, the child may get hurt or

suocate to death.

• Cyclopentane is used in the insulation.

The

gases in the insulation material require a

special disposal procedure.

Please contact your local authorities in regard

to the environmentally safe disposal of this

product.

• Keep all packaging materials well out of the

reach of children, as packaging materials can

be dangerous to children.

- If a child places a bag over his or her head, the

child could suocate.

DA68-02601D-05.indb 7 2020. 7. 24. 오후 5:41

English - 8

ADDITIONAL TIPS FOR

PROPER USAGE

• In the event of a power failure, call the local

oce of your Electricity Company and ask how

long it is going to last.

- Most power failures that are corrected in an

hour or two will not aect your refrigerator

temperatures. However, you should minimize

the number of door openings while the power

is o.

- Should the power failure last more than 24

hours, remove and discard all frozen food.

• The appliance might not operate consistently

(frozen contents can thaw or temperatures

can become too warm in the frozen food

compartment) when sited for an extended

period of time in a location where ambient

air temperatures are constantly below the

temperatures for which the appliance is

designed.

• In case of particular foods, keeping it under

refrigeration can have a bad eect on

preservation due to its properties.

• Your appliance is frost free, which means there

is no need to manually defrost your appliance.

This will be carried out automatically.

• Temperature rise during defrosting complies

with ISO requirements.

But If you want to prevent an undue rise in the

temperature of frozen food while the appliance

defrosts, wrap the frozen food in several layers

of newspaper.

• Do not re-freeze frozen foods that have thawed

completely.

Saving Energy Tips

- Install the appliance in a cool, dry room with

adequate ventilation.

Ensure that it is not exposed to direct sunlight

and never put it near a direct source of heat (a

radiator, for example).

- Not to block any vents and grilles is

recommended for energy eciency.

- Allow warm food to cool down before placing it

in the appliance.

- Put frozen food in the refrigerator to thaw.

You can then use the low temperatures of the

frozen products to cool food in the refrigerator.

- Do not keep the door of the appliance open for

too long when putting food in or taking food

out.

The shorter the time the door is open, the less

frost build-up you’ll have in the freezer.

- It is recommended to install the refrigerator with

clearance to the back and sides.

This will help reduce power consumption and

keep your energy bills lower.

DA68-02601D-05.indb 8 2020. 7. 24. 오후 5:41

English - 9

SETTING UP

Setting up your French Door

Refrigerator

GETTING READY TO INSTALL

THE REFRIGERATOR

Congratulations on your purchase of this Samsung

French Door Refrigerator.

We hope you enjoy the state-of-art features and

eciencies that this new appliance oers.

Selecting the best location for the

refrigerator

Choose:

• A location with easy access to a water supply.

• A location without direct exposure to sunlight.

• A location with level (or nearly level) ﬂooring.

• A location with enough space for the

refrigerator doors to open easily.

• A location that allows sucient space to the

right, left, back, and top for air circulation.

If the refrigerator does not have enough space,

it can cause the bad inﬂuence to refrigeration

eciency and power consumption.

• A location that allows you to move the

refrigerator easily if it needs maintenance or

service.

• Do not install the refrigerator in locations where

the temperature is over 110 °F (43 °C) or below

50 °F (10 °C ).

AA

B

C

D

E

Model RF26J*

Depth “A” 34” (863 mm)

Width “B” 32 3/4” (830 mm)

Height “C” 68 7/8” (1749 mm)

Overall Height “D” 70” (1777 mm)

Depth “E” 36 1/2” (925 mm)

11 6/8"

125° 125°

2"

29 5/8"

• Each measurement based on the design

dimension, so it may dier depending on

the measuring method.

DA68-02601D-05.indb 9 2020. 7. 24. 오후 5:41

English - 10

CAUTION

When moving your refrigerator

To prevent ﬂoor damage, be sure the front

adjusting legs are in the up position (above the

ﬂoor).

Refer to “Leveling the Refrigerator” on page 14.

Flat-blade screw

driver (-)

Control Lever

Flooring

For proper installation, you must place this

refrigerator on a level, hard surface that is the

same height as the rest of the ﬂoor.

This surface should be strong enough to support a

fully loaded refrigerator.

To protect the ﬁnish of the ﬂooring, cut a large

section of the cardboard carton and place it under

the refrigerator where you are working.

When moving the refrigerator, you need to pull and

push it straight forwards or back.

Do not wiggle it from side to side.

REQUIRED TOOLS

Required Tools (Not provided)

You need the following tools to complete the

installation of your refrigerator:

Philips

screwdriver (+)

Flat-blade screw

driver (-)

Socket wrench

(13/32”) (10 mm)

Allen wrench

(3/16”) (5 mm)

DA68-02601D-05.indb 10 2020. 7. 24. 오후 5:41

English - 11

SETTING UP

REMOVING THE REFRIGERATOR

DOORS

For some installations, you need to remove the

fridge and freezer drawers so you can move the

refrigerator to its ﬁnal location.

Do not remove the doors/drawer if you don’t need

to. If you do not need to remove the refrigerator

doors, go to “Leveling the Refrigerator” on page

14.

If you need to remove the doors. continue below.

Before removing the door/drawer, make sure you

read the following items:

WARNING

Disconnect power to the refrigerator before

removing the door or drawer.

•

Be careful not to drop, damage or

scratch the door / drawer while removing

them.

• Be careful not to injure yourself while removing

the doors / drawer.

• Reattach the door/drawer properly to avoid:

- Moisture from air leakage.

- Uneven door alignment.

- Wasting energy due to improper door seal.

WARNING

Disassembling the refrigerator doors

Be careful not to drop and scratch the doors while

removing them.

With the door opened

1. Remove 3 screws holding down the TOP

TABLE ( 1 ) and separate the connected wires.

(1)

2. Disconnect two connectors ( 2 ) on the left side

door. To remove the water coupler from the

hinge, twist and pull it from the hinge.

Remove the water line ( 3 ) while pressing the

marked part ( 4 ) of the water line coupler.

(2)

(3)

(4)

Red Clip

(1/4”)

CAUTION

If a red clip is on the coupler, you must remove it

before removing the tube.

CAUTION

Keep the clips out of the reach of children and

make sure that children do not play with them or

put them into their mouths.

DA68-02601D-05.indb 11 2020. 7. 24. 오후 5:41

English - 12

3. Pull and remove the hinge lever ( 5 ).

Remove

the ground screw ( 6 ) attached to the upper

left door hinges with a philips screwdriver (+).

Remove the upper left and right door hinges

( 7 ).

(5)

(7)

(6)

4. Lift the door straight up to remove.

5. Remove the screw ( 8 ) attached to the

lower left and right door hinges with a philips

screwdriver (+).

Remove the 2 hex head bolts ( 9 ) attached to

the lower left and right door hinges with an allen

wrench (3/16”).

Remove the lower left and right door hinges

( 10 ).

(10)

(8)

(9)

Allen wrench

REATTACHING THE

REFRIGERATOR DOORS

To reattach the fridge doors after you have moved

the fridge to its ﬁnal location, assemble the parts in

reverse order.

1. The Water Line must be fully inserted into the

center of the transparent coupler (Type A) or the

Guide Lines (Type B) to prevent water leakage

from the dispenser.

2. Insert the clip in the install pack, and then

conﬁrm that it holds the line ﬁrmly.

Type A Type B

Center of Transparent

coupler

The Guide Lines

Dispenser

clip A (1/4”)

(6.35 mm)

clip A (1/4”)

(6.35 mm)

DISASSEMBLE THE FREEZER

DRAWER

1. Take out the upper drawer by lifting it up.

2. Take out the lower basket ( 2 ) by lifting the

basket up from the rail system.

(2)

DA68-02601D-05.indb 12 2020. 7. 24. 오후 5:41

English - 13

SETTING UP

CAUTION

You can scratch the side of the bin if you twist it

left or right when disassembling or re-assembling

it.

3. Press the ﬁxing hook of the rail system.

4. Holding the top of the Freezer Drawer, pull it

out all the way, and then remove it from the rail

system.

CAUTION

Be careful not to scratch or dent the sliding rail by

letting it strike the ﬂoor.

CAUTION

Make sure that you mount the freezer basket in the

right position when removing / installing the freezer

door. Failing to do so may result in the door not

opening or closing properly.

CAUTION

Putting too much food into the freezer drawers can

prevent the freezer from closing completely and

can cause frost build-up.

RE-ASSEMBLE THE FREEZER

DRAWER

To reattach the drawer after you have moved the

fridge to its ﬁ nal location, assemble the parts in

reverse order.

DA68-02601D-05.indb 13 2020. 7. 24. 오후 5:41

English - 14

LEVELING THE REFRIGERATOR

Make sure the refrigerator is level so that you can

make ﬁnal adjustments.

Use a level to test if the refrigerator is level both

side to side and back to front.

If the refrigerator is not level, you will not be able

to get the doors perfectly even, which may cause

moisture condensation and increased energy bills.

Below is an example of how to level the refrigerator

if the left side of the refrigerator is lower than the

right side.

How to adjust the level

1. Open the freezer drawer and remove the lower

basket.

2. Insert a ﬂat-blade screwdriver (-) into a notch on

the left control lever, and then turn it counter-

clockwise to level the refrigerator.

(You turn the lever clockwise to lower the

refrigerator and counterclockwise to raise it.)

ﬂat-blade

screwdriver (-)

Control Lever

CAUTION

Both control levers must be touching the ﬂoor to

avoid possible personal injury or property damage

because of tipping.

CAUTION

The refrigerator on an uneven ﬂoor may tilt.

To prevent this, adjust the leg so that it contacts

the ﬂoor.

If the right side is lower, perform the same

procedure, but with the right control lever.

MAKING MINOR ADJUSTMENTS

BETWEEN DOORS

Remember, a leveled refrigerator is necessary for

getting the doors perfectly even.

If you need help, review the previous section on

leveling the refrigerator.

Fixed part

Adjustment part

The left door is ﬁxed.

To make minor adjustments between

doors, adjust only the right door.

1. Pull out the freezer drawer ( 1 ),then you can

see the lower hinge ( 2 ).

2. Insert a philips screwdriver (+) ( 3 ) into the shaft

( 4 ) of the lower hinge.

3. Adjust the height by turning a philips

screwdriver (+) ( 3 ) clockwise (

DOWN

) or

counterclockwise (

UP

).

( 1 )

( 2 )

( 3 )

( 4 )

( 3 )

When you turn a philips screwdriver (+)

counterclockwise (

UP

), the door will

move up.

DA68-02601D-05.indb 14 2020. 7. 24. 오후 5:41

English - 15

SETTING UP

INSTALLING THE WATER

DISPENSER LINE

A water dispenser with a ﬁlter is one of the helpful

features on your new refrigerator.

To help promote better health, the water ﬁlter

removes unwanted particles from your water.

However, it does not sterilize the water or destroy

microorganisms. You may need to purchase a

water purifying system to do that.

The water line also connects to the ice maker.

For the ice maker to operate properly, water

pressure of 20 ~ 125 psi (138 ~ 862 kPa) is

required.

If the refrigerator is installed in an area with low

water pressure (below 20 psi), you can install

a

booster pump to compensate for the low pressure.

After you have connected the water line, make

sure the water storage tank inside the refrigerator

is properly ﬁlled.

To do this, press the water dispenser lever until the

water runs from the water outlet.

New hose-sets supplied with the appliance are

to be used and that old hose-sets should not be

reused.

Water line installation kits are available at

extra cost from your dealer.

We recommend using a water line

installation kit that contains copper tubing

and a ¼” compression nut.

Connecting to the water supply line

1. First, shut o the main water

supply.

2. Locate the nearest cold water drinking line and

install the pipe clamp and shut o valve.

Cold water line

Pipe clamp

Shut o valve

3. Connect the water line installation kit to the

shut o valve.

Shut o valve

Pipe clamp

Cold water line

Water line installation kit

DA68-02601D-05.indb 15 2020. 7. 24. 오후 5:41

English - 16

Connecting the water supply line to the

refrigerator

There are several items that you need to purchase

to complete this connection.

You may ﬁnd these items sold as a kit at your local

hardware store.

Use Copper Tubing Use Plastic Tubing

• ¼” copper tubing

• ¼” compression nut

(1pc)

• Ferrule (2pc)

• ¼” plastic tubing

→ Molded end (Bulb)

• ¼” compression nut

(1pc)

Compression Nut

(1/4”) (Assembled)

Ferrule

(Not supplied)

Plastic Tubing

(Assembled)

Compression

Fitting (Assembled)

Molded end

(Bulb)

Compression

nut (B) (1/4”)

(Not supplied)

or

Copper tubing

(Not supplied)

Plastic tubing (B)

(Not supplied)

Household water supply line

Refrigerator

1. Connect the household water line to the

assembled compression ﬁtting.

- If you are using copper tubing, slip the

compression nut ( B ) (not supplied) and

ferrule (not supplied) on the copper tubing (not

supplied) as shown.

- If you are using plastic tubing ( B ), insert the

molded end (Bulb) of the plastic tubing ( B ) into

the compression ﬁtting.

CAUTION

Do not use without the molded end (Bulb) of the

plastic tubing ( B ).

2. Tighten the compression nut ( B ) onto the

compression ﬁtting.

Do not over-tighten the compression nut ( B ) .

3. Turn the water on and check for any leakage.

If you ﬁnd water drops or leakage in the

connection areas, turn o the main water

supply. Check the connections and, if

necessary, tighten.

4. Flush 1 gallon of water through the ﬁlter before

drinking or using the water from the refrigerator.

(Flush approximately 6 minutes.)

To ﬂush, press a large glass or cup against the

water dispenser lever.

Fill the glass, empty it into the kitchen sink after

it is ﬁlled, and then repeat.

5. After you turn on the refrigerator, let the ice

maker make ice for 1 to 2 days.

Over that period of time, throw out the ﬁrst 1 or

2 buckets of ice the freezer makes to ensure all

impurities have been removed from the water

line.

Only connect the water line to a drinkable

water source.

If you have to repair or disassemble the

water line, cut o 1/4“ of the plastic tubing

to make sure you get a snug, leak-free

connection.

You can test the water line quickly using a

paper cup. Under normal conditions, the

water dispenser can ﬁll a 5.75 oz. (170 cc)

cup in about 10 seconds.

DA68-02601D-05.indb 16 2020. 7. 24. 오후 5:41

English - 17

SETTING UP

COMPLETING THE SET UP

Now that you have your new refrigerator installed

in place, you are ready to set up and enjoy the

features and functions of the appliance.

By completing the following steps, your refrigerator

should be fully operational.

1. Make sure your refrigerator is in an appropriate

location with reasonable clearance between it

and the wall. Refer to installation instructions in

this manual.

2. Once the refrigerator is plugged in, make sure

the interior light comes on when you open the

doors.

3. Set the Temperature control to the coldest

temperature and wait for an hour.

The freezer will get slightly chilled and the motor

will run smoothly.

Reset the refrigerator and freezer to the

temperatures you want.

4. After you plug the refrigerator in, it will

take a few hours to reach the appropriate

temperature.

You can store food and drinks in the refrigerator

after the temperature is suciently cool.

If condensation or water drops appear

on both sides of the fridge door’s central

part, turn the Energy Saver mode o after

removing the condensation.

(See the explanation of the Energy Saver

button in “Using the control panel” on

page 19.)

DA68-02601D-05.indb 17 2020. 7. 24. 오후 5:41

English - 18

Operating your French Door

Refrigerator

USING THE CONTROL PANEL

RF26J*

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

( 1 ) Freezer / Power Freeze (3 sec)

The Freezer button serves two purposes:

- To set the Freezer to your desired

temperature.

- To turn the Power Freeze function on and o.

1. To set the Freezer temperature, touch the

Freezer button.

You can set the temperature between 5 °F

(-15 °C) and -8 °F (-23 °C).

2. Power Freeze function

Touch and hold this button for 3 seconds to

decrease the time needed to freeze products in

the Freezer.

It can be helpful if you need to quickly freeze

easily spoiled items or if the temperature in the

freezer has warmed dramatically.

(For example, if the door was left open.)

When you use this function, the energy

consumption of the refrigerator will increase.

Remember to turn it o when you don’t

need it and return the freezer to your original

temperature setting.

If you need to freeze a large amount of food,

activate the Power Freeze function at least 24

hours before you put the food into the freezer.

( 2 ) Alarm / Filter Reset (3sec)

The Alarm button serves two purposes:

- To turn the door open alarm on and o

- To reset the water ﬁlter life indicator.

1. Door Alarm Function

If the door alarm is set to On, an alarm beeps if

any refrigerator door is left open for more than

three minutes.

The beeping stops when you close the door.

The door alarm function is pre-set to On in the

factory.

You can turn it o by pressing and then releasing

the Alarm button.

You can turn it back on in the same fashion.

The icon lights up when the function is on.

When the Door Alarm function is on and the

alarm sound is triggered, the Door Alarm Icon

will blink while the alarm sounds.

2. Water Filter Life Indicator Function

After you replace the water ﬁlter, touch and hold

t

his button for 3 seconds to reset the water ﬁlter

life indicator.

When you reset the water ﬁlter life indicator, the

Filter icon on the panel turns O.

The Filter icon will turn red to let you know it is

time to change the water ﬁlter after six months

(about 300 gallons).

Some areas have large amounts of lime in their

water, which causes the water ﬁlter to clog more

quickly.

If this is the case in your area, you will have to

change the ﬁlter more frequently than every six

months.

( 3 ) Energy Saver

Touching this button turns Energy Saver mode

on and o.

When you turn Energy Saver on, the Energy

Saver icon lights.

Turn Energy Saver o and the icon goes o.

The Energy Saver function automatically turns on

when power is supplied to the refrigerator.

If condensation or water drops appear on the

doors, turn the Energy Saver mode o.

DA68-02601D-05.indb 18 2020. 7. 24. 오후 5:41

English - 19

OPERATING

( 4 ) Fridge / Power Cool (3 sec)

The Fridge button serves two purposes:

- To set the Fridge to your desired temperature.

- To turn the Power Cool function on and o.

1. To set the Fridge temperature, press the

Fridge button.

You can set the temperature between 44 °F

(7 °C) and 34 °F (1 °C).

2. Power Cool function

Touch and hold this button for 3 seconds to

decrease the time needed to cool products in

the Refrigerator.

It can be helpful if you need to quickly cool

easily spoiled items or if the temperature in the

fridge has warmed dramatically.

(for example, if the door was left open)

( 5 )

Lighting / °C↔°F (3sec)

The Lighting button serves two purposes:

- To turn the dispenser light on and o

- To switch the temperature units between ºC

and ºF.

1. Light Function

Touching the Lighting button turns on the

Dispenser LED lamp in continuous mode so that

it stays on continuously.

The button also lights up.

If you want the Dispenser lamp to come on only

when some one uses the dispenser, press the

Lighting button to turn the continuous mode o.

2. To switch the temperature units between ºC

and ºF.

Touch and hold this button for 3 seconds to

select the temperature display you want.

Each time you press and hold the button, the ºC

and ºF temperature modes alternate and the ºC

or ºF icon lights up, indicating your selection.

( 6 )

Ice Maker O

If you don’t want to make more ice, touch the

Ice Maker O button.

The icon will light up and the Ice-Maker stops

making ice.

We recommend you to stop ice making if the

following occur:

- There is enough ice in the ice bucket.

- You want to save water and energy.

- Water is not being supplied to the refrigerator.

If the ice maker function is ON, and the water

Line is not connected, there will be a water valve

noise from the back of the unit. Press the Ice

Maker O (Control Lock (3sec)) button for less

than 3 seconds until the Ice O Indicator

( )

illuminates.

( 7 ) Water

Touch this button to dispense water.

This mode can not be used with the Ice Type

mode simultaneously.

Water mode shuts o when you touch the

Cubed / Crushed Ice button.

To save electricity, the Panel Display turns o

automatically under the following conditions:

When no button has been pressed, when no

doors are open, or when no Dispenser Lever

has been pushed.

However, the icon indicating your cubed or

crushed ice selection, will stay on.

When you press a button, open a door, or push

a Dispenser Lever, the Panel Display will turn

on again.

Except for the Energy Saver, Water, and Cubed

/ Crushed Ice buttons, all function buttons

will become operational after you remove

your ﬁnger from the button you are currently

pressing.

DA68-02601D-05.indb 19 2020. 7. 24. 오후 5:41

English - 20

( 8 ) Filter

Water ﬁlter usage

This icon lights up when you need to change

the ﬁlter, usually after the refrigerator has

dispensed about 300 gallons of water (after

about 6 months). After you install the new water

ﬁlter, reset the ﬁlter indicator by touching and

holding the Hold 3sec for Filter Reset button for

3 seconds.

The icon will blink red for several seconds when

you open or close the door.

- If water is not dispensing or dispensing

slowly, you need to replace the water ﬁlter

because the water ﬁlter is clogged.

- Some areas have large amounts of lime in

their water, which causes the water ﬁlter to

clog more quickly.

( 9 ) Ice Type

Touch this button to select your desired ice type.

Cubed and crushed ice modes alternate when

you press the button.

This mode can not be used with the Water mode

simultaneously.

( 10 ) Ice Maker O / Control Lock (3sec)

The Ice Maker O button serves two purposes:

- To turn the Ice maker on and o

- To turn the Control Lock Function on and o.

1. Ice O Function

If you don’t want to make more ice, press the Ice

Maker O button.

2. Control Lock Function

Touch and hold this button for 3 seconds to lock

the display and the dispenser buttons so the

buttons can not be used.

When Control Lock is on, the refrigerator does

not dispense ice or water, even if the Dispenser

Lever is pressed.

The Control Lock icon lights up to indicate

you’ve activated the Control Lock function.

Press 3 seconds to unlock.

Cooling O Mode

Cooling O mode (also called Shop mode),

is designed for use by retailers when they are

displaying refrigerators on the shop ﬂoor.

In Cooling O mode, the refrigerator’s fan motor

and lights work normally, but the compressors

do not run, and the refrigerator and freezer do

not get cold.

To start Cooling O mode, touch and hold the

Freezer, Alarm and Fridge buttons for 5 seconds

during normal operation.

The refrigerator chime sounds and the

temperature display ﬂashes OFF.

To cancel Cooling O mode, touch and hold

the Freezer, Alarm and Fridge buttons again for

5 seconds.

DA68-02601D-05.indb 20 2020. 7. 24. 오후 5:41

La page charge ...

Samsung RF26J7510SR Manuel utilisateur

Ce manuel convient également à

Samsung RF26J7510SR Manuel utilisateur

dans d''autres langues

Documents connexes