AEG L6F48264IM Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur
USER
MANUAL
EN User Manual 2
Washing Machine
FR Notice d'utilisation 34
Lave-linge
L6F48264IM
CONTENTS
1. SAFETY INFORMATION.............................................................................................3
2. SAFETY INSTRUCTIONS.............................................................................................5
3. INSTALLATION............................................................................................................6
4. ACCESSORIES........................................................................................................... 10
5. PRODUCT DESCRIPTION.........................................................................................11
6. CONTROL PANEL..................................................................................................... 12
7. DIAL AND BUTTONS................................................................................................13
8. PROGRAMMES .........................................................................................................15
9. SETTINGS...................................................................................................................17
10. BEFORE FIRST USE.................................................................................................18
11. DAILY USE................................................................................................................18
12. HINTS AND TIPS..................................................................................................... 22
13. CARE AND CLEANING.......................................................................................... 24
14. TROUBLESHOOTING.............................................................................................28
15. CONSUMPTION VALUES.......................................................................................31
16. TECHNICAL DATA..................................................................................................32
17. QUICK GUIDE.........................................................................................................32
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler - features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com/webselfservice
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
www.aeg.com
2
1. SAFETY INFORMATION
Before the installation and use of the appliance,
carefully read the supplied instructions. The
manufacturer is not responsible for any injuries or
damage that are the result of incorrect installation or
usage. Always keep the instructions in a safe and
accessible location for future reference.
1.1 Children and vulnerable people safety
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
Children between 3 and 8 years of age and persons
with very extensive and complex disabilities shall be
kept away from the appliance unless continuously
supervised.
Children of less than 3 years of age should be kept
away from the appliance unless continuously
supervised.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of
it appropriately.
Keep detergents away from children.
Keep children and pets away from the appliance when
the door is open.
If the appliance has a child safety device, it should be
activated.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2
General Safety
Do not change the specification of this appliance.
This appliance is intended to be used in household
and similar applications such as:
ENGLISH
3
staff kitchen areas in shops, offices and other
working environments;
by clients in hotels, motels, bed & breakfast and
other residential type environments;
areas for communal use in blocks of flats or in
launderettes.
Do not exceed the maximum load of 8 kg (refer to the
"Programme chart" chapter).
The operating water pressure at the water entry point
from the outlet connection must be between 0.5 bar
(0.05 MPa) and 8 bar (0.8 MPa).
The ventilation opening in the base must not be
covered by a carpet, mat, or any floor covering.
The appliance must be connected to the water mains
using the new supplied hose sets, or other new hose
sets supplied by the Authorised Service Centre.
Old hose sets must not be reused.
If the mains power supply cable is damaged, it must
be replaced by the manufacturer, its Authorised
Service Centre or similarly qualified persons to avoid
an electrical hazard.
Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the
socket.
Do not use high pressure water sprays and/or steam
to clean the appliance.
Clean the appliance with a moist cloth. Use only
neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
If a tumble dryer is stacked on the top of the washing
machine, make sure to use the correct stacking kit
approved by AEG (see more details in chapter
"Accessories - Stacking kit").
www.aeg.com
4
2. SAFETY INSTRUCTIONS
2.1 Installation
The installation must comply
with relevant national
regulations.
Remove all the packaging and the
transit bolts including rubber bush
with plastic spacer.
Keep the transit bolts in a safe place.
If the appliance is to be moved in the
future they must be reattached to lock
the drum to prevent an internal
damage.
Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
Follow the installation instructions
supplied with the appliance.
Do not install or use a damaged
appliance.
Do not install or use the appliance
where the temperature can be less
than 0°C or where it is exposed to the
weather.
The floor area on which the appliance
is to be installed must be flat, stable,
heat resistant and clean.
Make sure that there is air circulation
between the appliance and the floor.
When the appliance is in its
permanent position, check if it is
levelled correctly with the aid of a
spirit level. If it is not, adjust the feet
accordingly.
Do not install the appliance directly
above a floor drain.
Do not spray water on the appliance
and do not expose it to excessive
humidity.
Do not install the appliance where the
appliance door cannot be fully
opened.
Do not put a closed container to
collect possible water leakage under
the appliance. Contact the Authorised
Service Centre to ensure which
accessories can be used.
2.2 Electrical connection
WARNING!
Risk of fire and electric
shock.
The appliance must be earthed.
Always use a correctly installed
shockproof socket.
Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to
the mains plug and to the mains
cable. Should the mains cable need
to be replaced, this must be carried
out by our Authorised Service Centre.
Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
Do not touch the mains cable or the
mains plug with wet hands.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
2.3 Water connection
Do not cause damage to the water
hoses.
Before connection to new pipes,
pipes not used for a long time, where
repair work has been carried out or
new devices fitted (water meters,
etc.), let the water flow until it is clean
and clear.
Ensure that there are no visible water
leaks during and after the first use of
the appliance.
Do not use an extension hose if the
inlet hose is too short. Contact the
Authorised Service Centre for the
replacement of the inlet hose.
When unpacking the appliance, It is
possible to see water flowing from the
drain hose. This is due to the testing
of the appliance with the use of water
in the factory.
ENGLISH
5
You can extend the drain hose to
maximum 400 cm. Contact the
Authorised Service Centre for the
other drain hose and the extension.
Make sure that there is access to the
tap after the installation.
2.4 Use
WARNING!
Risk of injury, electric shock,
fire, burns or damage to the
appliance.
Follow the safety instructions on the
detergent packaging.
Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
Do not wash fabrics which are heavily
soiled with oil, grease or other greasy
substances. It can damage rubber
parts of the washing machine.
Prewash such fabrics by hand before
loading them into the washing
machine.
Do not touch the glass door while a
programme operates. The glass can
get hot.
Make sure that all metal objects are
removed from the laundry.
2.5 Service
To repair the appliance contact the
Authorised Service Centre.
Use original spare parts only.
2.6 Disposal
WARNING!
Risk of injury or suffocation.
Disconnect the appliance from the
mains electrical and water supplies.
Cut off the mains electrical cable
close to the appliance and dispose of
it.
Remove the door catch to prevent
children or pets from becoming
trapped in the drum.
Dispose of the appliance in
accordance with local requirements
for the disposal of Waste Electrical
and Electronic Equipment (WEEE).
3. INSTALLATION
WARNING!
Refer to Safety chapters.
3.1 Unpacking
WARNING!
Remove all the packaging
and the transit bolts before
installing the appliance.
WARNING!
Use the gloves.
1. Use a cutter to cut through external
film.
2. Remove the external film.
www.aeg.com6
3. Remove the cardboard top and the
polystyrene packaging materials.
4. Open the door and remove the
polystyrene piece from the door seal
and all the items from the drum.
5. Put the front polystyrene packaging
element on the floor behind the
appliance.
6. Carefully put down the appliance
with the rear side on it.
Make sure not to
damage the hoses.
7. Remove the polystyrene protection
from the bottom.
1
2
8. Pull up the appliance in vertical
position.
9. Remove the power supply cable and
the drain hose from the hose holders.
It is possible to see
water flowing from the
drain hose. This is due to
the testing with water of
the appliance in factory.
10. Remove the three bolts by using the
key supplied with the appliance.
ENGLISH
7
11. Pull out the plastic spacers.
12. Put the plastic caps, that you find in
the user manual bag, in the holes.
We recommend that you
keep the packaging and the
transit bolts for any
movement of the appliance.
3.2 Positioning and levelling
1. Install the appliance on a flat hard
floor.
Make sure that carpets do
not stop the air circulation
below the appliance.
Make sure that the
appliance does not touch
the wall or other units.
2. Loosen or tighten the feet to adjust
the level.
WARNING!
Do not put cardboard, wood
or equivalent materials
below the appliance feet to
adjust the level.
x4
The appliance must be level and stable.
A correct adjustment of the
appliance level prevents the
vibration, noise and the
movement of the appliance
when in operation.
When the machine is
installed on a plinth or if a
washer dryer is stacked on
the washing machine, use
the accessories described in
chapter 'Accessories'. Read
carefully the instructions
supplied with the appliance
and with the accessory.
3.3 The inlet hose
1. Connect the water inlet hose to the
back of the appliance.
2. Position it toward left or right
depending on the position of the
water tap.
www.aeg.com
8
20º20º
45º45º
Make sure that the inlet hose
is not in vertical position.
3. If necessary, loose the ring nut to set
it in the correct position.
4. Connect the water inlet hose to the
cold water tap with 3/4" thread.
CAUTION!
Make sure that there are no
leaks from the couplings.
Do not use an extension
hose if the inlet hose is too
short. Contact the service
centre for the replacement
of the inlet hose.
3.4 Water drainage
The drain hose should be positioned at a
height of not less than 60 cm and not
more than 100 cm from the floor.
You can extend the drain
hose to maximum 400 cm.
Contact the authorized
service centre for the other
drain hose and the
extension.
It is possible to connect the drain hose in
different ways:
1. Make a U shape with the drain hose
and put it around the plastic hose
guide.
2. On the edge of a sink - Fasten the
guide to the water tap or to the wall.
Make sure that the plastic
guide cannot move when
the appliance drains.
Make sure that the drain
hose end is not immersed in
the water. There may be a
return of dirty water into the
appliance.
3. To a stand pipe with vent-hole -
Insert the drain hose directly into a
drain pipe. Refer to the illustration.
ENGLISH
9
The end of the drain hose
must always be ventilated ,
i.e. the inner diameter of the
drain pipe (min. 38 mm -
min. 1.5") must be larger
than the external diameter
of the drain hose.
4. If the end of the drain hose looks like
this (see the picture), you can push it
directly into the stand pipe.
5. Without the plastic hose guide, to
a sink spigot - Put the drain hose in
the spigot and tighten it with a
clamp. Refer to the illustration.
Make sure that the drain
hose makes a loop to
prevent particles going into
the appliance from the sink.
6.
Position the hose directly to a built-
in drain pipe in the room wall and
tighten it with a clamp.
4. ACCESSORIES
4.1 Available in
www.aeg.com/shop or from
authorised dealer
Only appropriate
accessories approved by
AEG ensure the safety
standards of the appliance. If
unapproved parts are used,
any claims will be
invalidated.
4.2 Fixing plate kit
(4055171146)
Available from your authorised dealer.
If you install the appliance on a plinth,
secure the appliance in the fixing plates.
Read carefully the instructions supplied
with the accessory.
www.aeg.com10
4.3 Stacking kit
The tumble dryer can be stacked on the
top of the washing machine only by
using the correct stacking kit
manufactured and approved by AEG.
Verify the compatible
stacking kit by checking the
depth of your appliances.
The stacking kit can be used only with
the appliances specified in the leaflet
provided with the accessory.
Read carefully the instructions supplied
with the appliance and with the
accessory.
WARNING!
Do not put the tumble dryer
under the washing machine.
5. PRODUCT DESCRIPTION
5.1 Special features
Your new washing machine meets all
modern requirements for an effective
treatment of laundry with low water,
energy and detergent consumption and
respectful of fabric care.
The ProSense technology adjusts
automatically the programme
duration to the laundry in the drum to
achieve perfect washing results in the
minimum possible time.
5.2 Appliance overview
1 2 3
9
5
6
7
4
10
8
11 12
ENGLISH 11
1
Worktop
2
Detergent dispenser
3
Control panel
4
Door handle
5
Rating plate
6
Drain pump filter
7
Feet for levelling the appliance
8
Drain hose
9
Inlet hose connection
10
Mains cable
11
Transit bolts
12
Hose support
6. CONTROL PANEL
6.1 Control panel description
O
n/O
Cottons
C
otton
s Eco
Syn
thetics
D
elicates
2
0min 3kg
Co
tton 20
°
Duvet
Spin
Drain
Wool/S
ilk
Programme
95°
1
200
1000
800
S
tain
s
Rinse hold
4
00
P
r
ewash
R
inse only
60°
40°
30
°
Delay Start
Time Save
O
ptions
Spin
Temp.
St
art/Pause
2
3
9
8 6
1
4
5
7
1
Programme dial
2
Display
3
Delay Start touch button
4
Time Save touch button
5
Start/Pause touch button
6
Options touch button
Stains option
Prewash option
Rinse only option
7
Spin reduction touch button
Rinse hold
option
8
Temp.
touch button
9
On/Off
push button
www.aeg.com12
6.2 Display
A
B
ED
C
A The digital indicator can show:
Programme duration (e. g. ).
Delay time (e. g. or ).
Cycle end ( ).
Warning code ( ).
B Extra rinse indicator. It lights on when this option is se-
lected .
C
The indicator blink during the laundry load detec-
tions.
D Child safety lock indicator.
E Door locked indicator.
7. DIAL AND BUTTONS
7.1 On/Off
Pressing this button for a few seconds
allows to activate or deactivate the
appliance. Two different tunes sound
while switching the appliance on or off.
As the Stand-by function automatically
deactivates the appliance to decrease
the energy consumption in a few cases,
you may need to activate the appliance
again.
For more details, refer to Stand-by
paragraph in Daily Use chapter.
7.2 Introduction
The options/functions are
not selectable with all
washing programmes. Check
the compatibility between
options/functions and
washing programmes in the
"Programme Chart". An
option/function can exclude
another one, in this case the
appliance doesn't allow you
to set the incompatible
options/functions together.
Make sure the screen and
touch buttons are always
clean and dry.
ENGLISH
13
7.3 Temp.
When you select a washing programme,
the appliance automatically proposes a
default temperature.
Set this option to change the default
temperature.
The indicator = cold water of the set
temperature comes on (the appliance
does not heat the water).
7.4 Spin
When you set a programme, the
appliance automatically sets the
maximum spin speed allowed.
Touch repeatedly this button to:
Activate the Rinse hold option
Set this option to prevent the laundry
creases.
The related indicator comes on.
There is a water in the drum when the
programme is completed.
The door stays locked and the drum
turns regularly to reduce creasing.
You must drain the water to unlock
the door.
If you touch the Start/Pause button,
the appliance performs the spinning
phase and drains the water.
The appliance empties the
water out automatically after
18 hours approximately.
7.5 Options
Press this button repeatedly to activate
one of the available options.
Stains
Select this option to add an anti-stain
phase to a programme in order to
treat heavily soiled or stained laundry
with stain remover.
Pour the stain remover into
compartment . The stain remover will
be added in the appropriate phase of
the washing programme.
This option can increase
the programme duration.
This option is not
available with a
temperature lower than
40 °C.
Prewash
Use this option to add a prewash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust , mud and other
solid particles.
This option can increase
the programme duration.
Rinse only
The appliance performs only the
rinsing phase, the spinning and the
draining phases of the selected
programme.
The relevant indicator comes on.
7.6 Delay Start
With this option you can delay the start
of a programme in a more convenient
time.
Touch repeatedly the button to set the
required delay. The time increases by
steps of 30 minutes up to 90' and from 2
hours up to 20 h.
The indicator of the option and the
indicator of the set value are on. After
touching theStart/Pause button the
appliance begins the countdown.
7.7 Time Save
This option may be advisable to shorten
the washing programme.
Use this option for items with normal or
light soil or items to refresh.
Touch this button once to decrease the
duration.
In case of smaller load, touch this button
twice to set an extra quick programme.
The indicator of the option and the
indicator of the set value are on.
7.8 Start/Pause
Touch the Start/Pause button to start,
pause the appliance or interrupt a
running programme.
www.aeg.com
14
8. PROGRAMMES
8.1 Programme Chart
Washing programmes
Programme Programme description
Washing programmes
Cottons
White and coloured cotton heavily and normally soiled cotton
items.
Cottons Eco
White and coloured cotton heavily and normally soiled cotton
items.
Cotton Energy saving programme. This programme at 60°C
with a load of 8 kg and Eco option is the reference programme
for the data entered in the energy label, in compliance with EU
Commission Directive 95/12/EC and measured according to
EN 60456/2005.
Synthetics
Synthetic items or mixed fabric items. Normal soil.
Delicates
Delicate fabrics such as acrylics, viscose and mixed fabrics
requiring gentler washing. Normal soil.
Wool/Silk
Machine washable wool, hand washable wool and other
fabrics with «hand washing» care symbol
1)
.
20 min. - 3 kg
Cotton and synthetic items lightly soiled or once worn.
Cotton 20°
Mixed fabric (cotton and synthetic items)
2)
.
Duvet
Single synthetic blanket, padded clothes, duvets, down
jackets and similar items.
Spin
All fabrics, except woollens and very delicate fabrics. Pro-
gramme for spinning the laundry and draining the water left in
the drum. The default spin speed is the one used for cotton
programmes. Reduce the spin speed accordingly to the type
of laundry.
Drain
All fabrics, except woollens and very delicate fabrics. Pro-
gramme for draining the water left in the drum.
1)
During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn't
rotate or doesn't rotate properly, but this is normal for this programme.
2)
This programme is for daily use and has the lowest energy and water consumption whilst maintaining
a good washing performance.
ENGLISH 15
Programme temperature, maximum spin speed and maximum load
Programme Default tempera-
ture
Temperature
range
Reference spin
speed
Spin speed range
Maximum load
Washing programmes
Cottons
40 °C
95 °C - Cold
1200 rpm
1200 rpm - 400 rpm
8 kg
Cottons Eco
40 °C
60 °C - 40 °C
1200 rpm
1200 rpm - 400 rpm
8 kg
Synthetics
40 °C
60 °C - Cold
1200 rpm
1200 rpm - 400 rpm
3 kg
Delicates
30 °C
40 °C - Cold
1200 rpm
1200 rpm - 400 rpm
3 kg
Wool/Silk
40 °C
40 °C - Cold
1200 rpm
1200 rpm - 400 rpm
1,5 kg
20 min. - 3 kg
30 °C
40 °C - 30 °C
1200 rpm
1200 rpm - 400 rpm
3 kg
Cotton 20°
Cold
1200 rpm
1200 rpm - 400 rpm
8 kg
Duvet
40 °C
60 °C - Cold
800 rpm
800 rpm - 400 rpm
3 kg
Spin
-
1200 rpm
1200 rpm - 400 rpm
8 kg
Drain
- - 8 kg
Programme options compatibility
Programme
Cottons
Cottons Eco
Synthetics
Delicates
Wool/Silk
20 min. - 3 kg
Cotton 20°
Duvet
Spin
Drain
Options
Spin
Rinse hold
www.aeg.com16
Programme
Cottons
Cottons Eco
Synthetics
Delicates
Wool/Silk
20 min. - 3 kg
Cotton 20°
Duvet
Spin
Drain
Options
Stains
1)
Prewash
Rinse only
Extra Rinse
Time Save
2)
3)
Delay Start
1)
This option is not available with temperature lower than 40 °C.
2)
If you set the shortest duration, we recommend that you decrease the load size. It is possible to fully
load the appliance, however the washing results can be less satisfactory.
3)
With these programmes you can set only the shorter duration.
8.2 Woolmark Apparel Care - Blue
The wool wash cycle of this machine has been
approved by The Woolmark Company for the
washing of wool garments labelled as «hand
wash» provided that the garments are wash-
ed according to the instructions issued by the
manufacturer of this washing machine. Follow
the garment care label for drying and other
laundry instructions. M1511
The Woolmark symbol is a Certification mark
in many countries.
9. SETTINGS
9.1 Child Lock
With this option you can prevent children
from playing with the control panel.
To activate/deactivate this option,
touch the Spin and the Option
buttons simultaneously until the
indicator comes on/goes off on
the display.
You can activate this option:
After you touch the Start/Pause
button: all the buttons and the
programme dial are deactivated
(except On/Off button ).
Before you touch the Start/Pause
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
ENGLISH 17
9.2 Acoustic signals
The acoustic signals operate when the
programme is completed (sequence of
sounds for about 2 minutes).
To deactivate/activate the acoustic
signals, touch the Delay Start and the
Time Save buttons simultaneously for
about 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
9.3 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
To activate/deactivate this option
touch the Temp. button and the Spin
button simultaneously until relevant
indicator
comes on/goes off on
display.
10. BEFORE FIRST USE
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
3. Pour a small quantity of detergent
into the compartment marked .
4. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
11. DAILY USE
WARNING!
Refer to Safety chapters.
11.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the On/Off button for a few
seconds to activate the appliance.
A short tune sounds (if activated). The
programme dial is automatically set on
Cotton programme .
11.2 Loading the laundry
1. Open the appliance door.
2. Shake the items before you put them
in the appliance.
3. Put the laundry in the drum, one item
at a time.
Make sure not to put too much laundry
in the drum.
4. Close the door firmly.
CAUTION!
Make sure that no laundry
stays between the seal and
the door. There is a risk of
water leakage or damage to
the laundry.
www.aeg.com18
11.3 Filling the detergent and
additives
Compartment for prewash phase,
soak programme or stain remover.
Compartment for washing phase.
Compartment for liquid additives
(fabric conditioner, starch).
Maximum level for quantity of liquid
additives.
Flap for powder or liquid detergent.
Always follow the
instructions that you find on
the packaging of the
detergent products, but we
recommend that you do not
exceed the maximum
indicated level ( ). This
quantity will however
guarantee the best washing
results.
After a washing cycle, if
necessary, remove any
detergent residue from the
detergent dispenser.
11.4 Check the position of the
flap
1. Pull out the detergent dispenser until
it stops.
2. Press the lever down to remove the
dispenser.
1
2
3.
To use powder detergent, turn the
flap up.
4. To use liquid detergent, turn the flap
down.
ENGLISH
19
With the flap in the
position DOWN:
Do not use
gelatinous or thick
liquid detergents.
Do not put more
liquid detergent than
the limit shown on
the flap.
Do not set the
prewash phase.
Do not set the delay
start function.
5. Measure out the detergent and the
fabric conditioner.
6. Carefully close the detergent
dispenser.
Make sure that the flap does not cause a
blockage when you close the drawer.
11.5 Setting a programme
1. Turn the programme dial to select
the desired washing programme. The
related programme indicator comes
on.
The indicator of the Start/Pause button
flashes.
The display shows an indicative
programme duration.
2. To change the temperature and/or
the spin speed, touch the related
buttons.
3. If desired, set one or more options
by touching the related buttons. The
related indicators come on in the
display and the given information
changes accordingly.
In case a selection is not
possible, no indicator comes
on and an acoustic signal
sounds.
11.6 Starting a programme
with the delay start
Touch the Start/Pause button.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts.
The PROSENSE adapts
starts at the end of the
countdown.
Cancelling the delay start after
the countdown has started
To cancel the delay start:
1. Touch the Start/Pause button to
pause the appliance. The related
indicator flashes.
2. Touch the Delay Start button
repeatedly until the display shows .
3. Touch the Start/Pause button again
to start the programme immediately.
Changing the delay start after
the countdown has started
To change the delay start:
1. Touch the Start/Pause button to
pause the appliance. The related
indicator flashes.
2. Touch the Delay Start button
repeatedly until the display shows
the desired delay time.
3. Touch the Start/Pause button again
to start the new countdown.
11.7 Starting a programme
Touch the Start/Pause button to start the
programme.
The related indicator stops flashing and
stays on.
The programme starts, the door is
locked. The display shows the indicator
.
The drain pump can operate
shortly before the appliance
fills water.
www.aeg.com20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72

AEG L6F48264IM Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur

dans d''autres langues