Jensen XS12S Guide d'installation

Jensen
Marque
Jensen
Modèle
XS12S
Catégorie
Subwoofers de voiture
Taper
Guide d'installation
XS12s Parameters / Specifications
Specifications/Caractéristiques/Espicificaciones
Power Handling (RMS)....................................
Power Handling (Peak)..................................
Frequency Response................................
Efficiency........................................
.....................................
Voice Coil Diameter..................................
Impedance.....................................................
Nom. Diameter......................................
Outer Diameter...................................
Cutout Diameter.................................
Mounting Depth.............................
350W
1400W
25-250Hz
93dB (1W in car)
90dB (2.0V/1m)
2” (50mm)
4 Ohm
12” (305mm)
12.48” (317mm)
11.0” (2
79mm)
5.03” (128mm)
Thiele-Small Parameters/Parámetros/Paramètres
Fs...................................................................... 28Hz
Qts.....................................................................0.452
Qes....................................................................0.512
Qms.................................................................... 3.90
Vas...................................................................3.95ft
3
BL.....................................................................10.85
Revc...........................................................
3.2 Ohm
Xmax (linear)....................................+/-10mm/0.40in
• 2” High Temperature (Aluminum Former) Voice Coil w/ 10mm Xmax
• Heavy Duty Motor Structure (Bumped and Vented) w/ 40 oz Magnet
• Power Handling: 350 Watts RMS, 1400 Watts Peak
• Sensitivity (2.0V/1M): 90dB
• Treated Parabolic Paper Fiber Cone
• Nitrile Rubber Surround for Excellent Damping
• Nomex-Reinforced Spiders for Excellent Linearity
• Optimized Magnet System for Deep Bass Performance
• Optimized “Q” for Closed and Ported Enclosures
• Low-Resonance Steel Basket
Caractéristiques Principales
Key Features
Características Principales
• 2 "Alta Temperatura (ex aluminio) de la bobina de voz w / 10mm
Xmax
• Estructura de Altas Prestaciones Motor (Bumped y ventilación) w /
40 oz imán
• Manejo de potencia: 350 vatios RMS, 1400 vatios de potencia
máxima
• Sensibilidad (2.0V / 1M): 90dB
• Cono de fibra de papel tratado parabólico
• Caucho de nitrilo Surround para una amortiguación excelente
• Las arañas reforzado con fibra de Nomex para una excelente
linealidad
• Imán sistema optimizado para un rendimiento Deep Bass
• Optimizado "Q" de Recintos cerrados y portado
• Bajo Resonancia acero Basket
• 2 "Haute Température (Aluminium Ancien) Voice Coil w / 10mm
Xmax
• Structure de Heavy Duty Motor (Bumped et Ventilé) w / 40 Magnet
oz
• Puissance: 350 Watts RMS, 1400 Watts crête
• Sensibilité (2.0V / 1M): 90dB
• Traitée Parabolique Paper Fiber Cone
• Surround caoutchouc nitrile pour un excellent amortissement
• Spiders Nomex-renforcés pour une excellente linéarité
• Magnet System Optimisé pour Deep Bass Performance
• Optimisé "Q" pour boîtiers fermés et Ported
• Low-Resonance Panier en acier
Recommended Enclosure Dimensions
Attention
• Use 3/4” MDF
• Use wood glue in joints
• Use screws every 4 inches
• Seal cracks inside box
• Dimensions are external
Attention
• Utilisez avec MDF de 3/4”
• Appliquez de la colle à bois
dans les onglets
• Placez les vis tous 4”
• Bouches les fissures à
l’intérior de la boîte
• Les dimensions indiquées
sont celles à l’extérieur
Atención
• Use una tabla de MDF
de 3/4”
• Use pegamento para
madera en las uniones
• Use tornillos cada 4”
• Selle las grietas adentro
de la caja
• Dimensiones externas
Common Math
Trapezoid Area = H x (D1+D2)/2
Trapezoid Volume = H x (D1+D2)/2 x W
Rectangle Area = H x D
Rectangular Box = H x W x D
Circle Area = 0.79 x D x D
Port Volume = 0.79 x D x D x H
Common Conversions
Cubic Feet = Cubic Inches / 1728
Cubic Feet = Liters / 28.3
Liters = Cubic Feet x 28.3
Inches = Meters x 2540
Square Inches = Square Feet / 144
H
D
H
D
W
H
W
D
H
D2
D1
H
D2
D1
W
1.5ft
3
Ported
1.25ft
3
Sealed
KLIPPEL
55
60
65
70
75
80
85
90
95
100
105
110
50 100 200
dB - [V] (rms)
Frequency [Hz]
Sealed Enclosure
Fill all sealed enclosures loosely (8 oz per cubic foot) with
polyester batting or similar material for best bass performance
Good
Enclosure Volume (Internal) = 0.75 ft
3
(Vb)
Example Dimensions: 14”H x 12.5”W x 12”D
F3 = 45Hz, Qtc = 1.25
Better
Enclosure Volume (Internal) = 1.00 ft
3
(Vb)
Example Dimensions: 14”H x 16”W x 12”D
F3 = 42Hz, Qtc = 1.1
Best
Enclosure Volume (Internal) = 1.25 ft
3
(Vb)
Example Dimensions: 14”H x 19.25”W x 12”D
F3 = 39Hz, Qtc = 1.0
Vented Enclosure
Line four walls of vented enclosures with 2” thick polyester
batting or similar material for best bass performance
Good
Enclosure Volume (Internal) = 1.0 ft
3
(Vb)
Example Dimensions: 14”H x 16.0”W x 12”D
Port: 3” Inside Diameter (ID) x 13” Long
FB = 35Hz, F3 = 39Hz
Better
Enclosure Volume (Internal) = 1.25 ft
3
(Vb) Example
Dimensions: 14”H x 19.25”W x 12”D Port: 3” Inside
Diameter (ID) x 12.5” Long
FB = 32Hz, F3 = 36Hz
Best
Enclosure Volume Internal = 1.50 ft
3
(Vb)
Example Dimensions: 14”H x 22.5”W x 12”D
Port: 3” Inside Diameter (ID) x 11.5” Long
FB = 30Hz, F3 = 33Hz
WARRANTY
Limited 1 Year Warranty - USA and
Canada
Length of Warranty. This warranty from Dual Electronics Corporation shall be in effect for a period of 1 year
from the date of the first consumer purchase.
Persons Protected. This warranty will be enforceable by the original owner during the warranty period so long
as proof of date of purchase from an authorized dealer is presented whenever warranty service is required.
What is Covered. Except as otherwise specified below, this warranty covers all defects in material and
workmanship in this product. The following are not covered: damage resulting from accident, misuse, abuse,
neglect, product modification, improper installation, incorrect line voltage, unauthorized repair or failure to
follow instructions supplied with the product; damage occurring during shipment (claims must be presented to
the carrier); any plexiglass included with the product; elimination of car static or other electrical interferences;
any product purchased outside USA or Canada, or on which the serial number has been defaced, modified or
removed.
How You Can Get Service.
U.S. Purchasers. Please telephone Jensen Customer Service at 1-888-921-4088.
Canadian Purchasers. The product should be returned to the dealer from whom it was purchased and such
dealer either will service or arrange for service of the product. If shipment of the product is required, it should
be packed properly. The original dated bill of sale must always be included with the product as proof of
warranty coverage.
What We Will Pay For. We will pay for all labor and material expenses required to repair the product, but you
must pay any labor costs for the removal and/or installation of the product. If the product is shipped for
warranty service, you must prepay the initial shipping charges, but Dual Electronics Corporation will pay
the return shipping charges if the product is returned to an address inside the USA or Canada.
Limitation of Implied or Statutory Warranties and Conditions. Exclusions. Dual Electronics Corporation's
liability is limited to the repair or replacement, at our option, of any defective product and shall not include
special, indirect, incidental or consequential damages of any kind. THIS WARRANTY IS EXCLUSIVE AND IN
LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE AND ANY OBLIGATION, LIABILITY, RIGHT, CLAIM OR REMEDY IN CONTRACT OR TORT,
WHETHER OR NOT ARISING FROM THE COMPANY'S NEGLIGENCE, ACTUAL OR IMPUTED. NO
PERSON OR REPRESENTATIVE IS AUTHORIZED TO ASSUME FOR THE COMPANY ANY OTHER
LIABILITY IN CONNECTION WITH THE SALE OF THIS PRODUCT. IN NO EVENT SHALL COMPANY BE
LIABLE FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Dual Electronics Corporation
Heathrow, FL 32746
1-888-921-4088
www.jensenmobile.com
© 2016 Dual Electronics Corporation
Printed in China/Impreso en China/Imprimé en Chine
  • Page 1 1
  • Page 2 2
  • Page 3 3

Jensen XS12S Guide d'installation

Jensen
Marque
Jensen
Modèle
XS12S
Catégorie
Subwoofers de voiture
Taper
Guide d'installation
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents