QUICK
START
GUIDE
Nebula Astro
Back
Power on / off
Home
View more options
Volume up / down
Volume down Volume up
Switch to HDMI connection
Mouse mode
Navigation
Confirm the selected content
LED indicator
Nebula Connect
< Settings Bluetooth
Nebula-xxxxxx
Bluetooth
Connected
DEVICE
Download theNebula Connectapp to control the projector
using a smartphone.
Nebula Connect
Charging Nebula Astro
Preparing the Remote Control
Powering On Astro
Adjusting the Focus
Controlling Astro
Downloading the Nebula Connect App
Wireless Screen Mirroring
Bluetooth Speaker Mode
Playing Video from HDMI / USB Devices
01
02
03
04
05
06
07
08
09
01
1
2
02 03 06
04
Charge the projector by
using the provided USB-C
cable and adaptor.
Press and hold the power
button for 2 seconds to
power on / off.
When the projector is in
standby mode, press the
power button to turn on /
off.
+
+
Rotate the knob to
adjust the focus.
Slide down to open the
battery compartment.
Insert new batteries,
matching the polarity
(+ / -) as indicated.
05
2s
Power on / off
Switch to Bluetooth
speaker mode
FCC ID:2AOKB-D2400
Make sure Nebula
Astro and your
phone are connected
to the same
wireless network.
T
Wirelessly cast movies, games, and music
from your phone to Nebula Astro.
07
Model: D2400 51005002176 V01
+1 (800) 988 7973 (US) Mon-Fri 9:00am - 5:00pm (PT)
+44 (0) 1604 936200 (UK) Mon-Fri 6:00 - 11:00 (GMT)
+49 (0) 69 9579 7960 (DE) Mo-Fr 6:00 - 11:00
+81 03 4455 7823 ( ) - 9:00 - 17:00
©Anker Innovations Limited. All rights reserved. NEBULA
and the NEBULA logo are trademarks of Anker Innovations
Limited, registered in the United States and other countries.
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong
Important Safety Instructions
The adapter should be installed near the equipment and must
be easily accessible.
Do not use the device in an environment where the temperature
is too high
or too low. Never expose the device to strong sunshine
or wet environments.
The ideal temperature range for this product and its accessories
is 41°F-95°F / 5°C-35°C.
When charging, place the device in an environment with a
temperature that ranges between41°F - 77°F / 5°C- 25°C as well
as good ventilation.
Only use the charger provided by the manufacturer. Using
unauthorized chargers may cause danger and violate the
projector's guarantee.
This charger is for indoor use only.
The charger type is DST451-150300W-K with output voltage /
current of DC
15V / 3A. The plug of the adapter is considered as the
disconnect device. Once
unplugged, the charger is considered as
disconnected from the power source.
RF Exposure Information(SAR)
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of
20cm between the radiator and your body.
To get a full user manual, visit the website:
www.seenebula.com/downloads
Um eine vollständige Bedienungsanleitung zu erhalten, besuchen
Sie die Website:
www.seenebula.com/downloads
Pour obtenir un manuel d'utilisation complet, visitez le site Web:
www.seenebula.com/downloads
Para obtener un manual de usuario completo, visite el sitio web:
www.seenebula.com/downloads
Per ottenere un manuale utente completo, visitare il sito Web:
www.seenebula.com/downloads
www.seenebula.com/downloads
:
بﯾوﻟا ﻊﻗوﻣ ةرﺎﯾزﺑ مﻗ ، لﻣﺎﻛ مدﺧﺗﺳﻣ لﯾﻟد ﻰﻠﻋ لوﺻﺣﻠﻟ
This transmitter must not be co-located or operated in
conjunction with any other antenna or transmitter.
Notice: Shielded cables
All connections to other computing devices must be made
using shielded
cables to maintain compliance with FCC regulations.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 9155 Archibald Ave, Suite 202, Rancho Cucamonga,
CA 91730, USA
Telephone: 1-800-988-7973
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference tht may cause
undesired operation.
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
This symbol means the product must not be
discarded as household waste, and should be
delivered to an appropriate collection facility for
recycling. Proper disposal and recycling helps
protect natural resources, human health and the
environment. For more information on disposal and
recycling of this product, contact your local
municipality, disposal service, or the shop where
you bought this product.
< Settings Bluetooth
Nebula-xxxxxx
Bluetooth
Connected
DEVICE
2
08 09
Notice
Declaration of Conformity
Hereby, Anker Innovations Limited. declares that this device is
in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU. For the
Declaration of Conformity, visit the website:
www.SeeNebula.com.
RF exposure information: The Maximum Permissible Exposure
(MPE) level has been calculated based on a distance of d=20
cm between the device and the human body. To maintain
compliance with RF exposure requirements, use products that
maintain a 20cm distance between the device and human
body.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS
Wi-Fi Operating Frequency Range:2412~2472MHz(2.4G);
5150~5250MHz, 5725~5850MHz (5G)
Wi-Fi Max Output Power:18.97dBm(ERIP for 2.4G);13.14dBm
(ERIP for 5G)
Bluetooth Operating Frequency Range 2402~2480MHz;
Bluetooth Max Output Power:6.85dBm(EIRP)
5150~5250 MHz can be used indoor only.
This product complies with the radio interference
requirements of the European Community.
1
Press to switch to Bluetooth speaker mode.
Enable Bluetooth on your smartphone and select
[Nebula-XXXXXX] as the device to be connected.
1
2
AT BE BG HR CY CZ DK
EE FI FR DE EL HU IE
IT LV LT LU MT NL PL
PT RO SK SI ES SE UK
The HDMI and USB port
cannot be used for video
or audio steaming
stmultaneously.
T
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the device."
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement."
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
IC RF Statement:
When using the product, maintain a distance of 20cm from the
body to ensure compliance with RF exposure requirements.
Lors de l'utilisation du produit, maintenez une distance de 20 cm
du corps afin de vous conformer aux exigences en matière
d'exposition RF.
Warning: Changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.
Note: This equipment has been tested and found to comply
with the limits
for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
a
residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference
to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
The following importer is the responsible party (contact for EU
matters only)
Importer: Anker Technology (UK) Ltd
Importer Address: Suite B, Fairgate House, 205 Kings Road,
Tyseley, Birmingham, B11 2AA, United Kingdom
-
1
-
2
Anker D2400 Manuel utilisateur
- Taper
- Manuel utilisateur
- Ce manuel convient également à
dans d''autres langues
- English: Anker D2400 User manual