Chief PAC811 Guide d'installation

Marque: Chief

Modèle: PAC811

Catégorie: Accessoires de montage de caméra

Taper: Guide d'installation

I N S T A L L A T I O N I N S T R U C T I O N S

Instrucciones de instalación

Installationsanleitung

Instruções de Instalação

Istruzioni di installazione

Installatie-instructies

Instructions d´installation

Video Conferencing Shelf

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

PAC811

PAC811 Installation Instructions

DISCLAIMER

Legrand | AV and its affiliated corporations and subsidiaries

(collectively “Legrand | AV”), intend to make this manual

accurate and complete. However, Legrand | AV makes no claim

that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Legrand | AV

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Legrand | AV

assumes no responsibility for accuracy, completeness or

sufficiency of the information contained in this document.

Chief® is a registered trademark of Legrand AV Inc.

DEFINITIONS

MOUNTING SYSTEM: A MOUNTING SYSTEM is the

primary Chief product to which an accessory and/or component

is attached.

ACCESSORY: AN ACCESSORY is the secondary Chief

product which is attached to a primary Chief product, and may

have a component attached or setting on it.

COMPONENT: A COMPONENT is an audiovisual item

designed to be attached or resting on an accessory or mounting

system such as a video camera, CPU, screen, display,

projector, etc.

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

IMPORTANT SAFETY INSTRUCTIONS!

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all mounting systems/

accessories are properly assembled and installed using the

instructions provided.

WARNING: Failure to provide adequate structural strength

for this accessory can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this accessory is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

accessory.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all equipment and accessories mounted on the PAC811 does

not exceed 10 lbs (4.54 kg).

WARNING: RISK OF INJURY TO PERSONS! Do not use

this accessory to support video equipment such as

televisions or computer monitors.

WARNING: Do not use this accessory outdoors.

--SAVE THESE INSTRUCTIONS--

DIMENSIONS

.27

CAMERA MOUNTING

HOLES

363.5

14.31

MINIMUM EXTENSION

MAXIMUM EXTENSION

Installation Instructions PAC811

LEGEND

Tighten Fastener

Apretar elemento de fijación

Befestigungsteil festziehen

Apertar fixador

Serrare il fissaggio

Bevestiging vastdraaien

Serrez les fixations

Loosen Fastener

Aflojar elemento de fijación

Befestigungsteil lösen

Desapertar fixador

Allentare il fissaggio

Bevestiging losdraaien

Desserrez les fixations

Phillips Screwdriver

Destornillador Phillips

Kreuzschlitzschraubendreher

Chave de fendas Phillips

Cacciavite a stella

Kruiskopschroevendraaier

Tournevis à pointe cruciforme

Open-Ended Wrench

Llave de boca

Gabelschlüssel

Chave de bocas

Chiave a punte aperte

Steeksleutel

Clé à fourche

By Hand

A mano

Von Hand

Com a mão

A mano

Met de hand

À la main

Hex-Head Wrench

Llave de cabeza hexagonal

Sechskantschlüssel

Chave de cabeça sextavada

Chiave esagonale

Zeskantsleutel

Clé à tête hexagonale

Pencil Mark

Marcar con lápiz

Stiftmarkierung

Marcar com lápis

Segno a matita

Potloodmerkteken

Marquage au crayon

Drill Hole

Perforar

Bohrloch

Fazer furo

Praticare un foro

Gat boren

Percez un trou

Adjust

Ajustar

Einstellen

Ajustar

Regolare

Afstellen

Ajuster

Remove

Quitar

Entfernen

Remover

Rimuovere

Verwijderen

Retirez

Optional

Opcional

Optional

Opcional

Opzionale

Optie

En option

Security Wrench

Llave de seguridad

Sicherheitsschlüssel

Chave de segurança

Chiave di sicurezza

Veiligheidssleutel

Clé de sécurité

PAC811 Installation Instructions

TOOLS REQUIRED FOR INSTALLATION

PARTS

5/32" 1/4"

A (1)

B (2) C (2)

[Video conferencing shelf]

1/4-20"

1/4-20 x 3/4"

D (1)

1/4-20 x 3/8"

Installation Instructions PAC811

Installation

NOTE: The PAC811 video conferencing shelf can be mounted

before or after the display is mounted to the faceplate.

It may be mounted above or below the display.

Attach to Faceplate

1. Position video conferencing shelf (A) above or below the

faceplate making sure to line up the holes on the shelf with

the holes on the faceplate. (See Figure 1) or (See Figure 2)

2. Install two 1/4-20 x 3/4" button head cap screws (B) through

holes in shelf (A) and faceplate. (See Figure 1) or (See

Figure 2)

3. Thread two 1/4-20" lock nuts (C) onto screws (B) to secure

shelf (A) to faceplate. (See Figure 1) or (See Figure 2)

Figure 1

Figure 2

Camera Mounting

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all equipment and accessories mounted on the PAC811 does

not exceed 10 lbs (4.54 kg).

NOTE: Mounting options will vary depending on the type of

camera being mounted.

1. Install 1/4-20 x 3/8" Phillips pan machine screw (D) through

holes on shelf and into hole on bottom of camera. (See

Figure 3)

NOTE: It is also acceptable to mount the camera directly to the

shelf without any screws or ties.

Figure 3

(A)

(B) x 2

faceplate

(top installation)

(bottom installation)

(B) x 2

faceplate

(A)

camera (example)

(D)

PAC811 Installation Instructions

Adjustments

Height Adjustment

1. Loosen two adjustment knobs on the back of the video

conferencing shelf (A). (See Figure 4)

2. Raise or lower shelf to desired height. (See Figure 4)

3. Tighten two adjustment knobs on the back of the shelf until

mount is secure. (See Figure 4)

Figure 4

Shelf Extension Adjustment

1. Loosen two button head cap screws on video conferencing

shelf (A). (See Figure 5)

2. Adjust shelf to desired mounting position. (See Figure 5)

3. Tighten two button head cap screws on shelf until mount is

secure. (See Figure 5)

Figure 5

123

Installation Instructions PAC811

PAC811 Installation Instructions

USA/International A 6436 City West Parkway, Eden Prairie, MN 55344

P800.582.6480 / 952.225.6000

F877.894.6918 / 952.894.6918

Europe A Franklinstraat 14, 6003 DK Weert, Netherlands

P+31 (0) 495 580 852

F+31 (0) 495 580 845

Asia Pacific A Office No. 918 on 9/F, Shatin Galleria

18-24 Shan Mei Street

Fotan, Shatin, Hong Kong

P852 2145 4099

F852 2145 4477

8800-003167 Rev00

2019 Legrand | AV

www.legrandav.com

08/19

Chief PAC811 Guide d'installation

Marque: Chief

Modèle: PAC811

Catégorie: Accessoires de montage de caméra

Taper: Guide d'installation

Télécharger le PDF

rapport

dans d''autres langues

English: Chief PAC811 Installation guide

Chief PAC811 Guide d'installation

Chief PAC811 Guide d'installation

dans d''autres langues

Documents connexes