Dyna-Glo Gas Grill DGP350NP-D Manuel utilisateur

Questions, problems, missing parts? Before returning to your retailer,

call our customer service department at 1-877-447-4768

03:4 – .m.a 03:8 p.m. CST, Monday – Friday

or email us at [email protected]

USER’S MANUAL AND OPERATING INSTRUCTIONS

70-10-001 REV: 002-01-25-11

LP Gas Grill

Model # DGP350NP/DGP350NP-D

ANS Z21.58a – CSA 1.6a-2008

Outdoor Cooking Gas Appliance

WARNING:

1. Do not store or use gasoline or other

of this or any other appliance.

2. An LP cylinder not connected for use shall

not be stored in the vicinity of this or any

other appliance.

3. This grill is for outdoor use only, and shall

not be used in a building, garage, under

overhangs or any other enclosed area.

4. Do not leave a lit grill unattended.

Keep children and pets away from

the grill at all times.

DANGER:

If you smell gas:

1. Shut off gas to the appliance.

3. Open Lid.

4. If odor continues, keep away from the

appliance and immediately call your

Assembler/Installer: This manual contains important information necessary for the proper

assembly and safe use of this appliance. Read and follow all warnings and instructions before

assembling and using this appliance. Leave these instructions with the consumer.

Consumer/User: Follow all warnings and instructions when using this appliance.

Retain these instructions for future reference.



STOP!



Questions With The Assembly?

Require Parts Information?

Product Under Manufacturers Warranty?

Call Toll Free : 1-877-447-4768

8:30 a.m. – 4:30 pm CST, Monday – Friday





Fill in the information below:

Model NumberDate of Purchase Product Serial No.

MODEL NUMBER AND PRODUCT SERIAL NUMBER CAN BE FOUND ON

THE RATING LABEL OF YOUR GRILL.

1

Place of Purchase

Safety Information .............................................................................................. 2 - 3

Package Contents ............................................................................................. 4 - 5

Illustrated Parts List .......................................................................................... 6 - 7

Hardware Contents .................................................................................................... 8

Preparation ................................................................................................................. 8

Assembly Instructions ......................................................................................... 9 - 20

Operation Instructions ........................................................................................ 21 - 25

Care and Maintenance ........................................................................................ 26 - 30

Troubleshooting ............................................................................................................ . 31

Replacements Parts List .................................................................................... 32 - 33

Warranty ...................................................................................................................... 34





1



2 3

SAFETY INFORMATION

1. DO NOT store or use gasoline or any other ammable vapors and liquids within 25 feet (8 m)

of this or any other appliance.

2. An LP Cylinder not connected for use should be stored a minimum of 10 feet (3 m) away from

this or any other appliance.

3. This grill is for use with propane gas only (propane gas cylinder not included).

4. Never attempt to attach this grill to the self-contained propane system of a boat, camper trailer,

motor home or house.

5. Never use charcoal or lighter uid with the grill.

6. Do not use gasoline, kerosene or alcohol for lighting. The LP gas supply cylinder used with

this appliance must be:

(a) Constructed and marked in accordance with the Specications for LP-Gas Cylinders of the U.S.

Department of Transportation (D.O.T.) or the National Standard of Canada, CAN/CSA-B339, Cylinders,

Spheres and Tubes for Transportation of Dangerous Goods; and Commission, as applicable; and

(b) Provided with a listed overlling prevention device.

(c) Provided with a cylinder connection device compatible with the connector for outdoor cooking

appliances. This grill is not intended to be used in or installed on recreational vehicles and/or boats.

7. Do not attempt to move the grill while it is lit or when it is hot. The casters should be locked when

not moving the grill.

8. Do not use the grill unless it is completely assembled and all parts are securely fastened and tightened.

9. Keep all combustible items and surfaces at least 36 inches (91.44 cm) away from the grill at all times.

10. Do not use in an explosive atmosphere. Keep grill area clear and free from combustible materials,

gasoline and other ammable vapors and liquids.

11. Do not touch metal parts of grill until it has completely cooled (about 45 minutes) to avoid burns,

unless you are wearing protective gear (pot holders, gloves, BBQ mittens, etc…).

12. Do not alter this grill in any manner.

13. Clean and inspect the hose before each use. If there is evidence of abrasion, wear, cuts, or leaks,

the hose must be replaced prior to operating the appliance. The replacement hose assembly will be

that which is specied by GHP Group, listed in the repair parts list in this manual.

14. Move gas hoses as far away as possible from hot surfaces and dripping hot grease.

15. Never keep a lled container in a hot car or car trunk. Heat will cause the gas pressure to increase,

which may open the relief valve and allow gas to escape.

16. Keep the grill’s valve compartment, burners and circulating air passages clean. Inspect the

grill before each use. Do not obstruct the ow of gas or ventilation air.

17. The use of alcohol, prescription or non-prescription drugs may impair the operator’s ability

to properly assemble or safely operate the grill.

18. Always open grill lid slowly and carefully as heat and steam trapped within the grill can burn you severely.

19. 

20. Do not place this grill on any type of tabletop surface. The grill should be placed on a at and level surface.

21. Do not use the grill in high winds.



Please read and understand this entire manual before attempting to assemble, operate or install

the product. If you have any questions regarding the product, please call customer service at

1-877-447-4768, 8:30 a.m. – 4:30 pm CST, Monday – Friday

















SAFETY INFORMATION

2

3

CALIFORNIA PROPOSITION 65 WARNING:

Fuels used in gas or oil red appliances and the products of combustion of such fuels, contain

chemicals known to the State of California to cause cancer, birth defects or other reproductive

harm. This product contains chemicals, including lead and lead compounds, known to the state

of California to cause cancer, birth defects or other reproductive harm.

36 in.

(914.4mm)

36 in.

(914.4mm)

Part No. Description Qty Part No. Description Qty

1 Bottom Shelf 1 12 Grill Body 1

2 Locking Caster 2 13 Control Knob 2

3 Caster 2 14 Collapsible Shelf Support A 2

4 Cart Left Side Panel 1 15 Collapsible Shelf Support B 2

5 Cart Right Side Panel 1 16 Heat Tent 2

6 Cylinder Holder 1 17 Cooking Grate 2

7 Pin 2 18 Warming Rack 1

8 Cart Rear Panel 1 19 Left Shelf 1

9 Upper Front Door Brace 1 20 Right Shelf 1

10 Door Assembly 1 21 Grease Cup Clip 1

11 Upper Swivel Rear Panel 1 22 Grease Cup 1



PACKAGE CONTENTS

4 5

























































PACKAGE CONTENTS

4

5

























































ILLUSTRATED PARTS LIST

6 7

  

  

  

  

Bottom Shelf Locking Caster

Cart Right Side Panel

Cart Rear Panel Down

Cart Swivel Rear Panel Upper

Cart Left Side Panel

Door Assembly

Caster

Cylinder Holder

Upper Door Brace

Grill Body





ILLUSTRATED PARTS LIST

6

7



  

  

  



Control Knob

Heat Tent

Left Shelf

Grease Cup

Collapsible Shelf Support B

Warming Rack

Grease Cup Clip

Collapsible Shelf Support A

Cooking Grate

Right Shelf



HARDWARE CONTENTS

    

M4x10

Flat Head Screw

4





M6

Step Screw

4







M5x12

S cr e w

16





6MM

Spring Washer

16

M6x12

S cr e w

30





6MM

Flat Washer

16



M6x25

Round Head Screw

4





Tools Required for Unpacking, Assembly and Leak Testing of This Product:

8 9











ASSEMBLY INSTRUCTIONS



1. Secure each locking caster (2) to the back side (side that is

beveled for access to locking mechanism when assembled and

upright) of the bottom shelf (1) using four screws (A) four spring

washers (F) ) and four at washers (G). Then tighten all screws.



First, remove the pins (7) from

the cylinder holder (6). Insert the

cylinder holder (6) through the

holes in the bracket pre-attached

to the cart right side panel (5).

Lock in place with the pins (7).

Back Side Beveled















M6x12

S cr e w

6MM

Spring Washer





16 pc

2. Install the casters (3) to the front side

(not beveled) of bottom shelf using four

screws (A) four spring washers (F) ) and

four at washers (G). Then tighten all screws.

6

5

7

Cylinder

Holder





1 pc

2 pc



8

9





6MM

Flat Washer

16 pc



Back Side Beveled









A: M6x12 Screw

Qty: 4pcs

A

4

1

5



ASSEMBLY INSTRUCTIONS

10 11



1. Attach the cart left side panel

(4) to the bottom shelf (1) with

two screws (A), but do not

fully tighten.

2. Attach the cart right side

panel (5) to the bottom shelf (1)

in the same way.



Install two screws (A) into the cart left side

panel and two screws (A) into the cart right

side panel (5) as illustrated at right. Do not

fully tighten screws (keep approximately 4

to 6mm from fully installed) as the cart rear

panel (8) has key hole slots that need to slide

onto these screws.



M6x12

S cr e w





4 pc











M6x12

S cr e w





4 pc











ASSEMBLY INSTRUCTIONS



1. Align the key holes in the cart rear panel (8) with the 4 screws just

installed into the cart left and right side panels. Push cart rear panel

(8) onto screws and down to meet bottom shelf (1).



Secure the upper door brace (9)

to the cart left and right side panels

using four screws (A), and then

tighten the screws.

2. Secure the cart rear panel (8) to the

bottom shelf (1) with two screws (A).

Next, tighten the 4 screws on the cart

left and right side panels (4 and 5).



M6x12

S cr e w





2 pc



 



M6x12

S cr e w





4 pc

A: M6x12 Screw

Qty: 4pcs

4

5

9

A







10

11

Tighten

Screw (A).







ASSEMBLY INSTRUCTIONS

12 13



Install the door assembly (10) to the cart left side panel (4)

with four at head screws (B) and tighten.





M4x10

S cr e w



4 pc



















 When not in use put the match holder

into the hole of door inner as shown below.





ASSEMBLY INSTRUCTIONS



Install the control knobs (13) onto the control panel of the

grill body (12) by gently pushing them onto the valve stem.

Control

Knob



2 pc





12

13

1. Secure the cart swivel upper rear panel

(11) to the cart left side panel (4) and cart

right side panel (5) with two screws (C).

Then install another 2 screws (C) into the

upper mounting holes of the left and right

side panels. These will secure the cart

swivel upper rear panel (11) when it is in

the closed position.

2. Rotate the cart swivel rear panel

upper (11) upwards until the two screws

(C) on the cart left and right side panels

snap into the two slots on the cart

swivel rear panel upper.









M6

Step Screw



4 pc







ASSEMBLY INSTRUCTIONS

14 15



2. Carefully place the grill body (12) over

the mounting tabs on the cart side panels

and onto the cart. Make sure the gas hose

is inside the cart. Align the holes in the grill

body with the holes in the mounting tabs.

Fasten the grill body (12) in place

with four screws (D).



M6x25

S cr e w



4 pc







1. First, lock the back

two casters to ensure the

cart doesn’t move while

installing the grill body (12).









14

15

ASSEMBLY INSTRUCTIONS



Install the collapsible

shelf support A (14) and

collapsible shelf support B

(15) on both sides of the

grill body using hardware

part E (M5x12 screw).





M5x12

S cr e w



16 pc

Open the lid and place the two heat tents (16) on the brackets

directly above the burners on the inside the grill body.



  



15: Collapsible

Shelf Support B

Qty: 2 pcs

A

B

Collapsible

Shelf Support

 





















ASSEMBLY INSTRUCTIONS



Place two cooking grates (17) on the grill body brace and grill rear panel.





Install the warming rack (18) as illustrated below.



16 17





ASSEMBLY INSTRUCTIONS



Align the left shelf (19) to the shelf support and insert between shelf supports,

then swing the left shelf 90 degrees up and push shelf against grill body.

Finally, press down on side shelf close to grill body until it is fully fastened

to the shelf support. Install the right shelf (20) in the same way.

Shelf Support

Swing shelf up 90 degrees

Push

Press down

16

17





ASSEMBLY INSTRUCTIONS



Open the cart swivel upper rear panel (11) and hang the grease cup clip (21)

onto the bottom of the grill body by pushing the small top part of the grease

cup clip (21) into the hole in the bottom of the grill body. Place the grease

cup (22) into the grease cup clip. Close the cart swivel upper rear panel.



 

Grease cup clip Grease cup Close the cart swivel

upper rear panel.

Open the door and place a gas cylinder

(not included) lled with LP gas into the bottom shelf.

Then lock the cylinder with the cylinder holder (6).



18 19



La page est en cours de chargement...

Dyna-Glo Gas Grill DGP350NP-D Manuel utilisateur

Ce manuel convient également à

Dyna-Glo Gas Grill DGP350NP-D Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents