Pioneer DEH-P460MP Manuel utilisateur

Operation Manual

Mode demploi

Multi-CD control High power CD/MP3/WMA player

with FM/AM tuner

Syntoniseur FM/AM et lecteur de CD/MP3/WMA,

Puissance élevée, avec contrôleur pour lecteur de

CD à chargeur

DEH-P460MP

English EspañolFrançais

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate

your model properly. After you have finished reading the instructions, put them away

in a safe place for future reference.

Before You Start

Information to User 5

For Canadian model 5

About this unit 5

About this manual 5

After-sales service for Pioneer products 5

Product registration 5

Precautions 6

Features 6

About WMA 6

Use and care of the remote control 7



Installing the battery 7



Using the remote control 7

About the XM READY mark 7

Protecting your unit from theft 8



Removing the front panel 8



Attaching the front panel 8

Whats What

Head unit 9

Remote control 9

Power ON/OFF

Turning the unit on 11

Selecting a source 11

Turning the unit off 11

Tuner

Listening to the radio 12

Introduction of advanced tuner

operation 13

Storing and recalling broadcast

frequencies 13

Tuning in strong signals 13

Storing the strongest broadcast

frequencies 14

Built-in CD Player

Playing a CD 15

Introduction of advanced built-in CD player

operation 16

Repeating play 16

Playing tracks in a random order 16

Scanning tracks of a CD 16

Pausing CD playback 17

Using compression and BMX 17

Selecting the search method 17

Searching every 10 track in the current

disc 18

Using disc title functions 18



Entering disc titles 18



Displaying disc titles 19

Using CD TEXT functions 19



Displaying titles on CD TEXT

discs 19



Scrolling titles in the display 19

MP3/WMA/WAV Player

Playing MP3/WMA/WAV 20

Introduction of advanced built-in CD player

(MP3/WMA/WAV) operation 22

Repeating play 22

Playing tracks in a random order 22

Scanning folders and tracks 23

Pausing MP3/WMA/WAV playback 23

Selecting the search method 23

Searching every 10 track in the current

folder 24

Using compression and BMX 24

Switching the tag display 24

Displaying text information on MP3/WMA

disc 24

Displaying text information on WAV disc 25

Scrolling text information in the display 25

Multi-CD Player

Playing a CD 26

50-disc multi-CD player 26

Contents

En

2

Introduction of advanced multi-CD player

operation 27

Repeating play 27

Playing tracks in a random order 27

Scanning CDs and tracks 28

Pausing CD playback 28

Using ITS playlists 28



Creating a playlist with ITS

programming 28



Playback from your ITS playlist 29



Erasing a track from your ITS

playlist 29



Erasing a CD from your ITS

playlist 30

Using disc title functions 30



Entering disc titles 30



Displaying disc titles 31

Using CD TEXT functions 31



Displaying titles on CD TEXT

discs 31



Scrolling titles in the display 31

Using compression and bass emphasis 31

Audio Adjustments

Introduction of audio adjustments 32

Using balance adjustment 32

Using the equalizer 32



Recalling equalizer curves 33



Adjusting equalizer curves 33



Fine adjusting equalizer curve 33

Adjusting loudness 34

Front image enhancer (F.I.E.) 34

Adjusting source levels 35

Initial Settings

Adjusting initial settings 36

Setting the clock 36

Switching the warning tone 36

Switching the auxiliary setting 36

Other Functions

Turning the clock display on or off 37

Using the AUX source 37



Selecting AUX as the source 37



Setting the AUX title 37

Introduction of XM operation 38



XM operation 38



Swiching the XM channel select

setting 38

Additional Information

Understanding built-in CD player error

messages 39

CD player and care 39

CD-R/CD-RW discs 40

MP3, WMA and WAV files 40



MP3 additional information 41



WMA additional information 41



WAV additional information 41

About folders and MP3/WMA/WAV files 41

Terms 43

Specifications 45

En

3

English

Contents

Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your

musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your

equipment offers. This manufacturer and the Electronic Industries Association’s Consumer

Electronics Group want you to get the most out of your equipment by playing it at a safe level. One

that lets the sound come through loud and clear without annoying blaring or distortion—and, most

importantly, without affecting your sensitive hearing.

Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of

sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard against

this by setting your equipment at a safe level BEFORE your hearing adapts.

To establish a safe level:

• Start your volume control at a low setting.

• Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.

Once you have established a comfortable sound level:

• Set the dial and leave it there.

Taking a minute to do this now will help to prevent hearing damage or loss in the future. After

all, we want you listening for a lifetime.

We Want You Listening For A Lifetime

Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since

hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the

Electronic Industries Association’s Consumer Electronics Group recommend you avoid prolonged

ex

p

osure to excessive noise. This

l

ist of sound

l

eve

l

s is inc

l

uded for

y

our

p

rotection

.

D

ec

i

bel

Leve

l Exampl

e

30

Quiet

l

i

b

rar

y

, soft whis

p

er

s

4

0

L

ivin

g

room, refri

g

erator,

b

edroom awa

y

from traffi

c

50

L

i

g

ht traffic, norma

l

conversation,

q

uiet office

60 Air conditioner at 20 feet, sewing machine

70 Vacuum cleaner, hair dryer, noisy restaurant

80 Average city traffic, garbage disposals, alarm clock at two feet

THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE

90 Subway, motorcycle, truck traffic, lawn mower

100 Garbage truck, chain saw, pneumatic drill

120 Rock band concert in front of speakers, thunderclap

140 Gunshot blast, jet plane

180 Rocket launching pad

Information courtesy of the Deafness Research Foundation.

En

4

Information to User

Alteration or modifications carried out without

appropriate authorization may invalidate the

users right to operate the equipment.

For Canadian model

This Class B digital apparatus complies with

Canadian ICES-003.

About this unit

The tuner frequencies on this unit are allo-

cated for use in North America. Use in other

areas may result in improper reception.

Important (Serial number)

The serial number is located on the bottom of

this unit. For your own security and convenience,

be sure to record this number on the enclosed

warranty card.

About this manual

This unit features a number of sophisticated

functions ensuring superior reception and op-

eration. All the functions have been designed

for the easiest possible use, but many are not

self-explanatory. This operation manual will

help you benefit fully from this unit s potential

and to maximize your listening enjoyment.

We recommend that you familiarize yourself

with the functions and their operation by read-

ing through the manual before you begin

using this unit. It is especially important that

you read and observe precautions on the next

page and in other sections.

After-sales service for

Pioneer products

Please contact the dealer or distributor from

where you purchased this unit for after-sales

service (including warranty conditions) or any

other information. In case the necessary infor-

mation is not available, please contact the

companies listed below:

Please do not ship your unit to the companies

at the addresses listed below for repair without

advance contact.

U.S.A.

Pioneer Electronics (USA) Inc.

CUSTOMER SUPPORT DIVISION

P.O. Box 1760

Long Beach, CA 90801-1760

800-421-1404

CANADA

Pioneer Electronics of Canada, Inc.

CUSTOMER SATISFACTION DEPARTMENT

300 Allstate Parkway

Markham, Ontario L3R OP2

(905) 479-4411

1-877-283-5901

For warranty information please see the Lim-

ited Warranty sheet included with this unit.

Product registration

Visit us at the following site:

1 Register your product. We will keep the details

of your purchase on file to help you refer to

this information in the event of an insurance

claim such as loss or theft.

Before You Start

En

5

English

Section

01

2 Receive updates on the latest products and

technologies.

3 Download owners manuals, order product

catalogues, research new products, and

much more.

Precautions

WARNING:

Handling the cord on this product or cords asso-

ciated with accessories sold with the product will

expose you to lead, a chemical known to the

State of California and other governmental enti-

ties to cause cancer and birth defects or other re-

productive harm. Wash hands after handling.

CAUTION:

USE OF CONTROL OR ADJUSTMENT OR

PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE.

CAUTION:

THE USE OF OPTICAL INSTRUMENTS

WITH THIS PRODUCT WILL INCREASE

EYE HAZARD.

! Keep this manual handy as a reference for

operating procedures and precautions.

! Always keep the volume low enough so you

can hear sounds outside of the car.

! Protect this unit from moisture.

! If the battery is disconnected or dis-

charged, the preset memory will be erased

and must be reprogrammed.

Features

CD playback

Music CD/CD-R/CD-RW playback is possible.

MP3 file playback

You can play back MP3 files recorded on CD-

ROM/CD-R/CD-RW (ISO9660 Level 1/Level 2

standard recordings).

! Supply of this product only conveys a li-

cense for private, non-commercial use and

does not convey a license nor imply any

right to use this product in any commercial

(i.e. revenue-generating) real time broad-

casting (terrestrial, satellite, cable and/or

any other media), broadcasting/streaming

via internet, intranets and/or other net-

works or in other electronic content distri-

bution systems, such as pay-audio or

audio-on-demand applications. An inde-

pendent license for such use is required.

For details, please visit

http://www.mp3licensing.com.

WMA file playback

You can play back WMA files recorded on CD-

ROM/CD-R/CD-RW (ISO9660 Level 1/Level 2

standard recordings).

WAV file playback

You can play back WAV files recorded on CD-

ROM/CD-R/CD-RW (Linear PCM (LPCM)/MS

ADPCM recordings).

About WMA

The Windows Media" logo printed on the box

indicates that this unit can playback the WMA

data.

WMA is short for Windows Media Audio and

refers to an audio compression technology

Before You Start

En

6

Section

01

that is developed by Microsoft Corporation.

WMA data can be encoded by using Windows

Media Player version 7 or later.

Microsoft, Windows Media, and the Windows

logo are trademarks, or registered trademarks

of Microsoft Corporation in the United States

and/or other countries.

Notes

! With some applications used to encode WMA

files, this unit may not operate correctly.

! With some applications used to encode WMA

files, album names and other text information

may not be correctly displayed.

Use and care of the remote

control

Installing the battery

Slide the tray out on the back of the remote

control and insert the battery with the plus (+)

and minus () poles pointing in the proper di-

rection.

WARNING

Keep the battery out of the reach of children.

Should the battery be swallowed, immediately

consult a doctor.

CAUTION

! Use only one CR2032 (3 V) lithium battery.

! Remove the battery if the remote control is not

used for a month or longer.

! Do not recharge, disassemble, heat or dispose

of the battery in fire.

! Do not handle the battery with metallic tools.

! Do not store the battery with metallic materi-

als.

! In the event of battery leakage, wipe the re-

mote control completely clean and install a

new battery.

! When disposing of used batteries, please

comply with governmental regulations or en-

vironmental public institutions rules that

apply in your country/area.

Using the remote control

Point the remote control in the direction of the

front panel to operate.

Important

! Do not store the remote control in high tem-

peratures or direct sunlight.

! The remote control may not function properly

in direct sunlight.

! Do not let the remote control fall onto the

floor, where it may become jammed under the

brake or accelerator pedal.

About the XM READY mark

The XM READY mark printed on the front

panel indicates that the Pioneer XM tuner

(sold separately) can be controlled by this unit.

Please inquire to your dealer or nearest

authorized Pioneer service station regarding

the XM tuner that can be connected to this

unit. For XM tuner operation, please refer to

the XM tuner owner s manual.

Before You Start

En

7

English

Section

01

Notes

! XM Satellite Radio is developing a new band

of radio in the U.S.A.

The system will use direct satellite-to-receiver

broadcasting technology to provide listeners

in their cars and at home with crystal-clear

sound seamlessly from coast to coast. XM will

create and package up to 100 channels of di-

gital-quality music, news, sports, talk and chil-

drens programming.

! The XM name and related logos are trade-

marks of XM Satellite Radio Inc.

Protecting your unit from

theft

The front panel can be detached from the

head unit to discourage theft.

! If the front panel is not detached from the

head unit within five seconds of turning off

the ignition, a warning tone will sound.

! You can turn off the warning tone. See

Switching the warning tone on page 36.

Important

! Never use force or grip the display and the

buttons tightly when removing or attaching.

! Avoid subjecting the front panel to excessive

shocks.

! Keep the front panel out of direct sunlight and

high temperatures.

Removing the front panel

1 Press OPEN to open the front panel.

2 Grip the left side of the front panel and

pull it gently outward.

Take care not to grip it tightly or to drop it.

Attaching the front panel

% Replace the front panel by holding it

upright to this unit and clipping it securely

into the mounting hooks.

Before You Start

En

8

Section

01

Head unit

1 CLOCK button

Press to change to the clock display.

2 PAUSE button

Press to turn pause on or off.

3 LOUDNESS button

Press to turn loudness on or off.

4 OPEN button

Press to open the front panel.

5 FUNCTION button

Press to select functions.

6 AUDIO button

Press to select various sound quality con-

trols.

7 a/b/c/d buttons

Press to do manual seek tuning, fast for-

ward, reverse and track search controls.

Also used for controlling functions.

8 BAND button

Press to select among three FM and one

AM bands and cancel the control mode of

functions.

9 16 buttons

Press for preset tuning and disc number

search when using a multi-CD player.

a EQ button

Press to select various equalizer curves.

b VOLUME

When you press VOLUME, it extends out-

ward so that it becomes easier to turn. To re-

tract VOLUME, press it again. Rotate to

increase or decrease the volume.

c SOURCE button

This unit is turned on by selecting a source.

Press to cycle through all of the available

sources.

d DISPLAY button

Press to select different displays.

Remote control

Operation is the same as when using the but-

ton on the head unit. See the explanation of

the head unit about the operation of each but-

ton with the exception of ATT, which is ex-

plained below.

Whats What

En

9

English

Section

02

e CD button

Press to select the built-in or multi-CD

player as the source.

f TUNER button

Press to select the tuner as the source.

g ATT button

Press to quickly lower the volume level, by

about 90%. Press once more to return to the

original volume level.

h VOLUME button

Press to increase or decrease the volume.

g

7

6

e

5

2

f

8

h

Whats What

En

10

Section

02

Turning the unit on

% Press SOURCE to turn the unit on.

When you select a source the unit is turned

on.

Selecting a source

You can select a source you want to listen to.

To switch to the built-in CD player, load a disc

in this unit (refer to page 15).

% Press SOURCE to select a source.

Press SOURCE repeatedly to switch between

the following sources:

Built-in CD playerTelevisionTunerXM

tunerMulti-CD playerExternal unit 1

External unit 2AUX

% When using the remote control, press

TUNER or CD to select a source.

Press each button repeatedly to switch be-

tween the following sources:

TUNER: XM tunerTunerTelevision

Sources off

CD: Built-in CD playerMulti-CD player

Sources off

Notes

! In the following cases, the sound source will

not change:

 When a unit corresponding to each source

is not connected to this unit.

 When no disc is set in this unit.

 When no magazine is set in the multi-CD

player.

 When the AUX (auxiliary input) is set to off

(refer to page 36).

! External unit refers to a Pioneer product (such

as one available in the future) that, although

incompatible as a source, enables control of

basic functions by this unit. Two external units

can be controlled by this unit. When two exter-

nal units are connected, the allocation of

them to external unit 1 or external unit 2 is

automatically set by this unit.

! When this units blue/white lead is connected

to the cars auto-antenna relay control term-

inal, the cars antenna extends when this

units source is turned on. To retract the an-

tenna, turn the source off.

Turning the unit off

% Press SOURCE and hold until the unit

turns off.

Power ON/OFF

En

11

English

Section

03

Listening to the radio

These are the basic steps necessary to operate

the radio. More advanced tuner operation is

explained starting on the next page.

1 Band indicator

Shows which band the radio is tuned to, AM

or FM.

2 Frequency indicator

Shows to which frequency the tuner is

tuned.

3 Stereo (5) indicator

Shows that the frequency selected is being

broadcast in stereo.

4 Preset number indicator

Shows what preset has been selected.

1 Press SOURCE to select the tuner.

Press SOURCE until tuner is selected as the

source.

2 Use VOLUME to adjust the sound level.

Rotate to increase or decrease the volume.

3 Press BAND to select a band.

Press BAND until the desired band is dis-

played, F1, F2, F3 for FM or AM.

4 To perform manual tuning, press c or

d with quick presses.

The frequencies move up or down step by

step.

5 To perform seek tuning, press and hold

c or d for about one second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

# You can cancel seek tuning by pressing either

c or d with a quick press.

# If you press and hold c or d you can skip

broadcasting stations. Seek tuning starts as soon

as you release the buttons.

Note

When the frequency selected is being broadcast

in stereo the stereo (5) indicator will light.

Tuner

En

12

Section

04

Introduction of advanced

tuner operation

1 Function display

Shows the function status.

2 LOC indicator

Shows when local seek tuning is on.

3 Preset number indicator

Shows what preset has been selected.

% Press FUNCTION to display the function

names.

Press FUNCTION repeatedly to switch be-

tween the following functions:

BSM (best stations memory)LOCAL (local

seek tuning)

# To return to the frequency display, press

BAND.

Note

If you do not operate the function within about 30

seconds, the display is automatically returned to

the frequency display.

Storing and recalling

broadcast frequencies

If you press any of the preset tuning buttons

16 you can easily store up to six broadcast

frequencies for later recall with the touch of a

button.

% When you find a frequency that you

want to store in memory press a preset

tuning button 16 and hold until the preset

number stops flashing.

The number you have pressed will flash in the

preset number indicator and then remain lit.

The selected radio station frequency has been

stored in memory.

The next time you press the same preset tun-

ing button 16 the radio station frequency is

recalled from memory.

Notes

! Up to 18 FM stations, 6 for each of the three

FM bands, and 6 AM stations can be stored in

memory.

! You can also use a and b to recall radio sta-

tion frequencies assigned to preset tuning

buttons 16.

Tuning in strong signals

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals

for good reception.

1 Press FUNCTION to select LOCAL.

Press FUNCTION until LOCAL appears in the

display.

2 Press a to turn local seek tuning on.

Local seek sensitivity (e.g., LOCAL 2) appears

in the display.

3 Press c or d to set the sensitivity.

There are four levels of sensitivity for FM and

two levels for AM:

FM: LOCAL 1LOCAL 2LOCAL 3

LOCAL 4

AM: LOCAL 1LOCAL 2

Tuner

En

13

English

Section

04

The LOCAL 4 setting allows reception of only

the strongest stations, while lower settings let

you receive progressively weaker stations.

4 When you want to return to normal

seek tuning, press b to turn local seek tun-

ing off.

LOCAL:OFF appears in the display.

Storing the strongest

broadcast frequencies

BSM (best stations memory) lets you automa-

tically store the six strongest broadcast fre-

quencies under preset tuning buttons 16 and

once stored there you can tune in to those fre-

quencies with the touch of a button.

1 Press FUNCTION to select BSM.

Press FUNCTION until BSM appears in the

display.

2 Press a to turn BSM on.

BSM begins to flash. While BSM is flashing

the six strongest broadcast frequencies will be

stored under preset tuning buttons 16 in

order of their signal strength. When finished,

BSM stops flashing.

# To cancel the storage process, press b.

Note

Storing broadcast frequencies with BSM may re-

place broadcast frequencies you have saved

using 16.

Tuner

En

14

Section

04

Playing a CD

These are the basic steps necessary to play a

CD with your built-in CD player. More ad-

vanced CD operation is explained starting on

the next page.

1 Play time indicator

Shows the elapsed playing time of the cur-

rent track.

2 Track number indicator

Shows the track currently playing.

1 Press OPEN to open the front panel.

CD loading slot appears.

# After a CD has been inserted, press SOURCE

to select the built-in CD player.

2 Insert a CD into the CD loading slot.

Playback will automatically start.

CD loading slot

EJECT button

# You can eject a CD by pressing EJECT.

# To avoid a malfunction, make sure that no

metal object comes into contact with the term-

inals when the front panel is open.

3 Close the front panel.

4 Use VOLUME to adjust the sound level.

Rotate to increase or decrease the volume.

5 To perform fast forward or reverse,

press and hold c or d.

# If you select the search method to ROUGH,

pressing and holding c or d enables you to

search every ten track in the current disc. (Refer

to Selecting the search method on page 17.)

6 To skip back or forward to another

track, press c or d.

Pressing d skips to the start of the next track.

Pressing c once skips to the start of the cur-

rent track. Pressing again will skip to the pre-

vious track.

Notes

! The built-in CD player plays one, standard, 12-

cm or 8-cm (single) CD at a time. Do not use

an adapter when playing 8-cm CDs.

! Do not insert anything other than a CD into

the CD loading slot.

! If you cannot insert a disc completely or if

after you insert a disc the disc does not play,

check that the label side of the disc is up.

Press EJECT to eject the disc, and check the

disc for damage before inserting the disc

again.

! If the built-in CD player does not operate prop-

erly, an error message such as ERROR-11

may be displayed. Refer to Understanding

built-in CD player error messages on page 39.

! When a CD TEXT disc is inserted, the disc and

track titles begin to scroll to the left auto-

matically.

Built-in CD Player

En

15

English

Section

05

Introduction of advanced

built-in CD player operation

1 RPT indicator

Shows when repeat play is turned on.

2 Function display

Shows the function status.

% Press FUNCTION to display the function

names.

Press FUNCTION repeatedly to switch be-

tween the following functions:

RPT (repeat play)RDM (random play)

SCAN (scan play)PAUSE (pause)COMP

(compression and bit media EX)FF/REV

(search method)TAG (tag display)

# To return to the playback display, press BAND.

Notes

! When playing audio data (CD-DA), it is not ef-

fective even if you turn TAG (tag display) on.

(Refer to page 24.)

! If you do not operate the function within about

30 seconds, the display is automatically re-

turned to the playback display.

Repeating play

Repeat play lets you hear the same track over

again.

1 Press FUNCTION to select RPT.

Press FUNCTION until RPT appears in the dis-

play.

2 Press a to turn repeat play on.

RPT:ON appears in the display. The track cur-

rently playing will play and then repeat.

3 Press b to turn repeat play off.

RPT:OFF appears in the display. The track cur-

rently playing will continue to play and then

play the next track.

Note

If you perform track search or fast forward/re-

verse, repeat play is automatically cancelled.

Playing tracks in a random

order

Random play lets you play back tracks on the

CD in a random order.

1 Press FUNCTION to select RDM.

Press FUNCTION until RDM appears in the

display.

2 Press a to turn random play on.

RDM :ON appears in the display. Tracks will

play in a random order.

3 Press b to turn random play off.

RDM :OFF appears in the display. Tracks will

continue to play in order.

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of

each track on the CD.

1 Press FUNCTION to select SCAN.

Press FUNCTION until SCAN appears in the

display.

Built-in CD Player

En

16

Section

05

2 Press a to turn scan play on.

SCAN :ON appears in the display. The first 10

seconds of each track is played.

3 When you find the desired track press

b to turn scan play off.

SCAN :OFF appears in the display. The track

will continue to play.

# If the display has automatically returned to

the playback display, select SCAN again by press-

ing FUNCTION.

Note

After scanning of a CD is finished, normal play-

back of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of

the CD.

1 Press FUNCTION to select PAUSE.

Press FUNCTION until PAUSE appears in the

display.

2 Press a to turn pause on.

PAUSE:ON appears in the display. Play of the

current track pauses.

3 Press b to turn pause off.

PAUSE:OFF appears in the display. Play will re-

sume at the same point that you turned pause

on.

Note

You can also turn pause on or off by pressing

PAUSE.

Using compression and BMX

Using the COMP (compression) and BMX

functions let you adjust the sound playback

quality of the CD player. Each of the functions

have a two-step adjustment. The COMP func-

tion balances the output of louder and softer

sounds at higher volumes. BMX controls

sound reverberations to give playback a fuller

sound. Listen to each of the effects as you se-

lect through them and use the one that best

enhances the playback of the track or CD that

you are listening to.

1 Press FUNCTION to select COMP.

Press FUNCTION until COMP appears in the

display.

2 Press a or b to select your favorite set-

ting.

Press a or b repeatedly to switch between the

following settings:

COMP OFFCOMP 1COMP 2

COMP OFFBMX 1BMX 2

Selecting the search method

You can switch the search method between

fast forward/reverse and searching every 10

track.

1 Press FUNCTION to select FF/REV.

Press FUNCTION until FF/REV appears in the

display.

# If the search method ROUGH has been pre-

viously selected, ROUGH will be displayed.

2 Press c or d to select the search meth-

od.

Press c or d until the desired search method

appears in the display.

! FF/REV  Fast forward and reverse

! ROUGH  Searching every 10 track

Built-in CD Player

En

17

English

Section

05

Searching every 10 track in

the current disc

If a disc contains over 10 tracks, you can

search every 10 track. When a disc contains a

lot of tracks, you can roughly search the track

you want to play.

1 Select the search method ROUGH.

Refer to Selecting the search method on the

previous page.

2 Press and hold c or d to search every

10 track in a disc.

# If a disc contains less than 10 tracks, pressing

and holding d recalls the last track of a disc.

Also, if the remaining number of tracks after

searching every 10 tracks are less than 10, press-

ing and holding d recalls the last track of a disc.

# If a disc contains less than 10 tracks, pressing

and holding c recalls the first track of a disc.

Also, if the remaining number of tracks after

searching every 10 tracks are less than 10, press-

ing and holding c recalls the first track of a

disc.

Using disc title functions

You can input CD titles and display the title.

The next time you insert a CD for which you

have entered a title, the title of that CD will be

displayed.

Entering disc titles

Disc title input lets you input CD titles up to 8

letters long and up to 48 disc titles into this

unit.

1 Play a CD that you want to enter the

title.

2 Press FUNCTION and hold until TITLE IN

appears in the display.

# When playing a CD TEXT disc, you cannot

switch to TITLE IN. The disc title will have already

been recorded on a CD TEXT disc.

3 Press a or b to select a letter of the al-

phabet.

Each press of a will display a letter of the al-

phabet in A B C ... X Y Z, numbers and sym-

bols in 1 2 3 ... > [ ] order. Each press of b will

display a letter in the reverse order, such as Z

Y X ... C B A order.

4 Press d to move the cursor to the next

character position.

When the letter you want is displayed, press d

to move the cursor to the next position and

then select the next letter. Press c to move

backwards in the display.

5 Move the cursor to the last position by

pressing d after entering the title.

When you press d one more time, the entered

title is stored in memory.

6 Press BAND to return to the playback

display.

Notes

! Titles remain in memory, even after the disc

has been removed from this unit, and are re-

called when the disc is reinserted.

! After data for 48 discs has been stored in

memory, data for a new disc will overwrite the

oldest one.

! If you connect a multi-CD player, you can

input disc titles for up to 100 discs.

Built-in CD Player

En

18

Section

05

Displaying disc titles

You can display the title of any disc that has

had a disc title entered.

% Press DISPLAY.

Press DISPLAY repeatedly to switch between

the following settings:

Play timeDISC TTL (disc title)

When you select DISC TTL, the title of the cur-

rently playing disc is shown in the display.

# If no title has been entered for the currently

playing disc, NO TITLE is displayed.

Using CD TEXT functions

Some discs have certain information encoded

on the disc during manufacture. These discs

may contain such information as the CD title,

track title, artists name and playback time

and are called CD TEXT discs. Only these spe-

cially encoded CD TEXT discs support the

functions listed below.

Displaying titles on CD TEXT discs

% Press DISPLAY.

Press DISPLAY repeatedly to switch between

the following settings:

Play timeDISC TTL (disc title)ART NAME

(disc artist name)TRK TTL (track title)

ART NAME (track artist name)

# If specific information has not been recorded

on a CD TEXT disc, NO XXXX will be displayed

(e.g., NO D-TTL).

Scrolling titles in the display

This unit can display the first 8 letters only of

DISC TTL, ART NAME, TRK TTL and

ART NAME. When the recorded information is

longer than 8 letters, you can scroll the text to

the left so that the rest of the title can be seen.

% Press DISPLAY and hold until the title

begins to scroll to the left.

The rest of the title will appear in the dis-

play.

Built-in CD Player

En

19

English

Section

05

Playing MP3/WMA/WAV

These are the basic steps necessary to play an

MP3/WMA/WAV with your built-in CD player.

More advanced MP3/WMA/WAV operation is

explained starting on page 22.

1 Folder number indicator

Shows the folder number currently playing.

2 MP3 indicator

Shows when the MP3 file is playing.

3 WMA indicator

Shows when the WMA file is playing.

4 Play time indicator

Shows the elapsed playing time of the cur-

rent track (file).

5 Track number indicator

Shows the track (file) currently playing.

! If a track number 100 to 199 is selected,

d on the left of the track number indica-

tor will light.

! If a track number 200 or more is selected,

d on the left of the track number indica-

tor will blink.

1 Press OPEN to open the front panel.

CD loading slot appears.

# After a CD-ROM has been inserted, press

SOURCE to select the built-in CD player.

2 Insert a CD-ROM into the CD loading

slot.

Playback will automatically start.

CD loading slot

EJECT button

# You can eject a CD-ROM by pressing EJECT.

# To avoid a malfunction, make sure that no

metal object comes into contact with the term-

inals when the front panel is open.

3 Close the front panel.

4 Use VOLUME to adjust the sound level.

Rotate to increase or decrease the volume.

5 Press a or b to select a folder.

# You cannot select a folder that does not have

an MP3/WMA/WAV file recorded in it.

# To return to folder 01 (ROOT), press and hold

BAND. However, if folder 01 (ROOT) contains no

files, playback commences with folder 02.

6 To perform fast forward or reverse,

press and hold c or d.

# This is fast forward and reverse operation only

for the file being played. This operation is can-

celed when the previous or next file is reached.

# If you select the search method to ROUGH,

pressing and holding c or d enables you to

search every ten track in the current folder. (Refer

to Selecting the search method on page 23.)

7 To skip back or forward to another

track, press c or d.

Pressing d skips to the start of the next track.

Pressing c once skips to the start of the cur-

rent track. Pressing again will skip to the pre-

vious track.

MP3/WMA/WAV Player

En

20

Section

06

La page charge ...

Pioneer DEH-P460MP Manuel utilisateur

Ce manuel convient également à

Pioneer DEH-P460MP Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents