1. Place lower leg (D) on top of upper leg (C).

Please read and understand this entire manual before attempting to assemble or install the product.

• Paint on this furniture might peel if it is not handled properly. Handle with care.

Washer

Hex Wrench

Tools Required for Assembly (included): Hex Wrench

• Clean frame with a solution of warm water and mild soap. Dry completely. Do not use bleach

or solvents. Use a fine automotive wax to maintain gloss on non-textured finishes.

• When using touch-up paint, if covering scratches, rub lightly with fine steel wool to smooth the

surface and improve paint adhesion. Apply thin coats of touch-up paint and allow ample drying

• The finish on furniture is formulated and baked on to make it highly resistant to repellents and

and workmanship of your patio furniture, provided your furniture is maintained with care and

or improper assembly are not covered. Discoloration or fading of the finish or fabrics as a

result of exposure to the elements, chemicals or spills; tabletop breakage; corrosion or rusting

If within the stated warranty period a product is found to be defective in material or workmanship,

the purchaser must contact the manufacturer’s customer service department at 1-866-439-9800.

The manufacturer, at its option, will repair or replace the defective parts.

The warranty is to the original purchaser and is non-transferable. Any replacement of warranted

or has been discontinued. As some states do not allow exclusions or limitations on an implied

•

3. Flip assembly upright, use the glass bumper

(F) to help level the surface, then place the glass

(A) into the top (B).

•