Sanyo CRT Television DS20424 Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

AS
Model No.:
No. de Modelo:
N
o
de modele:
Color TV Owner’s Manual
Color TV Manual Del Propietario
Manuel d’instructions du télécouleur
“Read this manual before assembling
(or using) this product.”
Important Safety Instructions . . . . . . 2
Welcome to the World of Sanyo . . . . 3
Features . . . . . . . . . . . . . . . . . . . . . . . 3
Specifications . . . . . . . . . . . . . . . . . . . 3
Basic Set-up and Connections . . . . . . 4
Front & Rear Panel . . . . . . . . . . . . . . 5
Using the Component Video and Audio
Input Jacks . . . . . . . . . . . . . . . . . . . . 6
Using the Front A/V Input Jacks . . . . 7
Using the Rear A/ V Input Jacks . . . . 8
Using the Remote Control . . . . . 9 ~ 10
TV Adjustment and Setup
How to Operate the
On-Screen Menu . . . . . . . . . . . . . . 10
Audio Mode . . . . . . . . . . . . . . . . . 11
Adjusting Picture/Sound . . . . . . . . 11
Adding or Deleting a Channel . . . . 12
Closed-Captioning . . . . . . . . . . . . . . 12
V-Guide Operation
(Parental Control) . . . . . . . . . . 13 ~ 14
Care and Cleaning . . . . . . . . . . . . . . 14
Helpful Hints (problems/solutions) . 15
Warranty (Mexico) . . . . . . . . . . . . . . 16
Warranty (U.S.A. and Canada) . . . . . 17
Child Safety Matters . . . . . . Back Cover
ESPAÑOL . . . . . . . . . . . . . . 18 ~ 35
Contenido . . . . . . . . . . . . . . . . . . . 18
FRANÇAIS . . . . . . . . . . . . . . 36 ~ 51
Table des matières . . . . . . . . . . . 36
CONTENTS
DS20424
Printed in U.S.A. SMC, June 2004
Impreso en U.S.A. SMC, Junio 2004
Imprimé aux É.-U. SMC, juin 2004
Part No. / No. de Parte/
N
o
de pièce : 1AA6P1P4633–
Service Code/Código de Servicio/
Code de service : 610 316 6643
Importado Por :
Comercializadora México
Americana, S. DE R.L. DE C.V.
Nextengo Nº 78
Col. Santa Cruz Acayucan
Del. Azcapotzalco, México D.F. C.P.
02770, RFC CMA 9109119L0
Telefono: 55-5328-3500
ENERGY STAR
“As an ENERGY STAR
®
Partner, Sanyo
Manufacturing Corporation has determined
that this product meets the E
NERGY STAR
®
guidelines for energy efficiency.”
Positioning the appliance
1. Do not place your appliance on an unstable cart, stand, shelf or table.
Serious injury to an individual, and damage to the appliance, may result
if it should fall. Your salesperson can recommend approved
carts and stands or shelf and wall mounting instructions. An
appliance and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may
cause the appliance and cart combination to overturn.
2. Slots and openings in the cabinet and in the back or bottom are
provided for ventilation. To ensure reliable operation of the appliance and
to protect it from overheating, these openings must not be blocked or
covered. The openings should never be covered with a cloth or other
material, and the bottom openings should not be blocked by placing the
unit on a bed, sofa, rug, or other similar surface. This appliance should
never be placed near or over a radiator or heat register. This appliance
should not be placed in a built-in installation such as a bookcase unless
proper ventilation is provided.
3. Do not expose the appliance to rain or use near water . . . for example,
near a bathtub, swimming pool, kitchen sink, in a wet basement, etc.
Hooking Up Outdoor Antenna
LIGHTNING PROTECTION FOR YOUR ANTENNA AND SET AS PER
NATIONAL ELECTRICAL CODE INSTRUCTIONS.
4. If an outside antenna is connected to the receiver, be sure the antenna
system is grounded so as to provide some protection against voltage
surges and built up static charges. Article 810 of the National Electrical
Code, ANSI/NFPA 70, provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead in
wire to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode.
An outside antenna system should not be located in the vicinity of over-
head power lines or other electric light or power circuits, or where it can
fall into such power lines or circuits. When installing an outside antenna
system extreme care should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.
Plug in the power cord
5. This product should be operated only from the type of power source indi-
cated on the marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or local power
company. This product is equipped with a polarized alternating current
line plug (a plug having one blade wider than the other). This plug will fit
into the power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of this polarized plug.
Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
6. Power-supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
Cleaning
7. Before cleaning, unplug the unit from the wall outlet. Do not apply liquid clean-
ers or aerosol cleaners directly to the unit. Use a dry cloth for cleaning.
Service & Repair
8. Unplug the appliance from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A. If the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the appliance.
C. If the appliance has been exposed to rain or water.
D. If the appliance has been dropped or the cabinet has been damaged.
E. If the appliance exhibits a distinct change in performance.
F. If the appliance does not operate normally by following the operating
instructions, adjust only those controls that are covered in the
operating instructions. Improper adjustment of other controls may
result in damage and will often require extensive work by a qualified
technician to restore the appliance to normal operation.
9. Upon completion of any service or repair, request the service techni-
cian’s assurance that only Factory Authorized Replacement Parts that
have the same characteristics as the original parts were used, and that
routine safety checks have been performed to determine that the
appliance is in safe operating condition. Unauthorized substitutions may
result in fire, electrical shock, or other hazards.
10. Never add accessories that have not been specifically designed for use
with this appliance as they may cause hazards.
11. For added protection during a lightning storm, or when the set is left
unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna. This will prevent damage to the set
due to lightning or power line surges.
12. Never push objects of any kind into this product through openings as
they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind on the
product.
EXAMPLE OF ANTENNA GROUNDING ACCORDING TO NATIONAL
ELECTRICAL CODE, ANSI/NFPA 70
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING
A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING
AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANY-
ING THIS UNIT.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE ADHERE TO ALL WARNINGS ON THE PRODUCT AND IN THE OPERATING INSTRUCTIONS. BEFORE
OPERATING THE PRODUCT, PLEASE READ ALL OF THE SAFETY AND OPERATING INSTRUCTIONS. RETAIN THIS
LITERATURE FOR REFERENCE. Follow all instructions...
“Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40
of the NEC that provides guidelines for proper grounding and, in particular, specifies that
the cable ground shall be connected to the grounding system of the building, as close to
the point of cable entry as practical.”
NEC
- NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
2
Important Safety Instructions
Trilingual On-Screen Menu
Automatic Channel Search
Auto Shut Off
Closed-Captioning/Quikcap
Digital picture controls with
on-screen display
MTS stereo/SAP Decoder
Auto Flesh Tone
Factory preset adjustments for
picture/sound
Front Surround Sound
Tone
V-Guide (Parental Control)
Game Mode
480i Component AV Input Jacks
Audio/Video In Jacks
2 sets—Front (AV1), Rear (AV2)
S-Video In Jack
Sleep Timer (3 hours)
TV Reset
181 Channel Tuning System
VHF Channels 2-13
UHF Channels 14-69
Cable TV (CATV) 1, 14-125
Automatic Fine Tuning
VHF and Cable Channels
Remote Control
0~9 Numbered Channel Selection
Channel Scanning
Volume Mute
Power Recall
Display Sleep
Caption Reset
Menu V-Guide
Input
PICTURE TUBE SIZE, True Flat Screen
(Measured Diagonally) . . . . . . . . . . . . . . . . . . . . . . . . . 20-inches
PICTURE RESOLUTION . . . . . . . . . . . . . . . . . . . . . . . . 260 Lines
Video Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 Lines
ANTENNA INPUT . . . . . . . . . . . . . . . . . UHF/VHF/CATV 75
POWER REQUIREMENT . . . . . . . . . . . . . . . . . . . . . 120VAC 60Hz
POWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 watts
HORIZONTAL DIM. (Width) . . . . . . . . . . . . . . . . 23.1 in. (588mm)
VERTICAL DIM. (Height) . . . . . . . . . . . . . . . . . 18.3 in. (466mm)
DEPTH DIM. (Thickness) . . . . . . . . . . . . . . . . . 19.4 in. (493mm)
WEIGHT (Approx.) . . . . . . . . . . . . . . . . . . . . 53.5 lbs. (24.3 Kg.)
SOUND (2 Speakers) . . . . . . . . . . . . . . . . . . . . . . . Size: 5x9 cm
AMPLIFIER . . . . . . . . . . . . . . . . . . . . . . . . . . Built-in with 1W/ch
AUDIO/VIDEO INPUT JACKS . . . . . . . . . . . . . . . . . . . . . Video Input
. . . . . . . . . . . . . . . . . . . . Audio Input (2 sets, R/L – Front/Rear)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .S-Video Input
480i COMPONENT VIDEO
INPUT JACKS . . . . . Component Video Inputs (Y, Pb, Pr – R/L)
CAUTION: FCC Regulations state that improper modifications or unauthorized changes to this unit may void the
user’s authority to operate the unit.
Welcome to the World of Sanyo
Thank you for purchasing a Sanyo Color Television. You made an excellent choice for Performance, Styling,
Reliability, and Value. The TV is designed with easy to use on-screen set-up instructions and operating features.
Please retain this owners manual for future reference. Need assistance? Visit our Web site at
www.sanyoctv.comor call toll free 1-800-877-5032.
Thank You / Features / Specifications
3
Specifications
Features
CATV FRANCHISE NOTE:
Cable companies, like public
utilities, are franchised by
local government authorities.
To receive cable programs,
even with equipment which
is capable of receiving cable
channels, the consumer
must subscribe to the cable
company’s service.
QuickTips
The TV will automati-
cally select the
correct Antenna
mode for the type of
RF signal you
connect.
TV will switch off
automatically after
15 minutes if there is
no signal reception
(cable out or station
not broadcasting).
Exception—When the
Video mode is
selected, the TV will
not automatically
switch off when
signal reception has
stopped for 15
minutes.
If you move the TV
to a new location,
press the RESET key
twice after connect-
ing the signal and
turning on the TV.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
AUDIO VIDEO
INPUT 2
R
L
UHF/VHF/CATV
75
PR
PB
Y
VIDEO
(MONO)
S-VIDEO
COMPONENT
2
IN
FROM ANT.
OUT
OUT TO TV
CATV IN
OUT TO TV
S-VIDEO
CH3
CH4
VIDEO
L-AUDIO-R
VIDEO
L-AUDIO-R
IN FROM
SAT.
IN OUT
CONNECTING CABLE SERVICE, OR RF ANTENNA, OR SATELLITE DISH
RECEIVER TO TV
Cable Box
RF Antenna
Satellite Receiver
TV Back
INITIAL SET-UP
1.
Install batteries in remote control, see page 9.
2.
Connect signal, see below.
3.
Plug in AC power cord.
4.
Press POWER key to turn on TV.
5. Follow on-screen instructions, see pages 10 ~ 12.
VCR Back
Note:
If you do not have a VCR
connect signal directly to TV 75
ohm jack.
4
Basic Set-up and Connections
Operational Tip for No Signal Connection:
If the TV is used as a monitor only, with a DVD player or some other type of external
equipment, and no cable or antenna signal is available, the following setup is necessary:
Your TV is designed to automatically search for available channels. Therefore, the
initial start up requires that you press the MENU key, enabling the TV to automatically
go through the channel search process before you can operate the TV. After the initial
channel search is completed, you must press the MENU key again to complete the
channel search process. This may take several minutes.
After the channel search process is complete (2 searches), you can press the INPUT
key on the remote control to use the TV as a monitor.
Basic Set-up and Connections
Note:
If you do not have a cable box
connect cable directly to TV 75 ohm jack
or VCR.
AUDIO VIDEO
INPUT 2
R
L
UHF/VHF/CATV
75
PR
PB
Y
VIDEO
(MONO)
S-VIDEO
COMPONENT
2
POSITIONING THE TV
Do not position the TV in a confined
area. Allow space for normal air
circulation around electronic parts.
Audio/Video In Jacks (AV2)
Connect video equipment here (see pages 6 and 8).
Note: S-Video connection will override an AV2
video connection.
S-Video In Terminal
To enhance video detail use the AV2
S-Video jack instead of the AV2 Video jack,
if available on your external equipment. (An
S-Video connection will override connection to
the AV2 video input jack. See page 8.)
480i Component Video In Jacks
(Component 2, Y, Pb, Pr)
Connect video equipment here
(see page 6).
Note: Audio/Video Input (AV2) and Com-
ponent inputs share the same
audio (R/L) input jacks.
Front & Rear Panels
5
Front and Rear Panels
VIDEO L- AUDIO -R
AV INPUT
MENU CH VOL POWER
Audio/Video In Jacks (AV1)
Connect video equipment here (see page 7).
FRONT
BACK
6
Connect a DVD Player to Component AV In
CONNECTING A DVD PLAYER
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
Connect a DVD Player or other equipment’s interlaced Component Video Out to the TV
Component Video In (Y-Pb-Pr) Jacks.
Connect the DVD Players Audio Out to the TVA/V2 Audio In (L/R) Jacks.
Press POWER to turn on the TV. Turn on external equipment also.
To access Audio/Video inputs, press the INPUT key to select COMPONENT2.
Notes: DVD Player component output must be set to Interlaced (480i).
Audio/Video Input (AV2) and Component inputs share the same audio (R/L) input
jacks.
Connect equipment to the component video inputs or the AV2 video input, but not
both types at the same time.
Y
P
B
/CB /CR
PR
COMPONENT VIDEO OUT
AUDIO OUT
RL
DIGITAL OUT
COAXIAL
S-VIDEO OUT
VIDEO OUT
VIDEO OUT
SELECT
S-VIDEO COMPONENT
AUDIO VIDEO
INPUT 2
R
L
UHF/VHF/CATV
75
PR
PB
Y
VIDEO
COMPONENT
2
S-VIDEO
DVD Player
TV BACK
QuickTips
A solid Blue screen
with COMPONENT2
displayed means
that the Video mode
is selected, but no
signal is being
detected at the
Component jacks.
Check connection,
and turn on external
equipment.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
What you will need for connections:
Component video cable – 1
Audio Cable – 1
Using the Component Video and Audio Input Jacks
Press INPUT key after
connecting cables to access
the A/V inputs.
There is NO need to tune
to a blank channel.
MENU RECALL
RESETINPUT
CH
POWER
Remote Control
Connect a Video Game to the Front A/V In jacks
7
CONNECTING A VIDEO GAME OR OTHER EQUIPMENT
Switch off TV and external equipment before connecting cables.
(Cables are not supplied.)
Connect game Audio Output (R/L) to the TVAudio Input (R/L).
Then connect game Video Output to the TV Video Input.
Press POWER to turn on the TV. Turn on external equipment also.
To access Audio/Video inputs, press the INPUT key to select
GAME or select using the menu.
Using the Front Video and Audio Input Jacks
MENU CH VOL POWER
VIDEO L- AUDIO -RAV INPUT
VIDEO L- AUDIO -R
AV INPUT
Camcorder
Video Game
What you will need for connections:
Audio Cable – 1
QuickTips
A solid Blue screen
with the word
VIDEO1 displayed,
means that the Video
mode is selected, but
no signal is being
detected at the
Video jacks. Check
connections, turn on
external equipment.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
MENU
CH
VOL
A
S
Lift up here
to open.
8
Connect a VCR or DVD Player to AV Input Rear Jacks
CONNECTING A VCR OR OTHER EQUIPMENT
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
Connect VCR, DVD Player, or other equipment’s Audio Video Out to the TV Audio Video
Input.
For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L) Input.
Optional
Connect DVD Player or other equipment’s S-Video Out to the TV S-Video In Jack.
Using the S-Video jack overrides the Video (AV1) jack.
Press POWER to turn on the TV. Turn on external equipment also.
To access Audio/Video inputs, press the INPUT key to select VIDEO2.
Notes: Audio/Video Input (AV2) and Component inputs share the same audio (R/L) input
jacks.
Connect equipment to the component inputs or AV2 inputs, but not both sets at
the same time.
QuickTips
Make sure all cable
connectors are fully
seated on jacks.
Always match A/V
cables according to
the colors; red for
right audio, white for
left audio and yellow
for video.
A solid Blue screen
with the word
VIDEO2 displayed,
means that the Video
mode is selected, but
no signal is being
detected at the
Video jacks. Check
connections, turn on
external equipment.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
What you will need for connections:
AV Cable – 1
OPTIONAL CONNECTION
S-Video Cable – 1
Audio Cable – 1
Press
INPUT key after
connecting cables to
access the A/V inputs.
There is NO need to
tune to a blank
channel.
Using the Rear Audio/ Video Input Jacks
Y
P
B
/CB /CR
PR
COMPONENT VIDEO OUT
AUDIO OUT
RL
DIGITAL OUT
COAXIAL
S-VIDEO OUT
VIDEO OUT
VIDEO OUT
SELECT
S-VIDEO COMPONENT
AUDIO VIDEO
INPUT 2
R
L
UHF/VHF/CATV
75
PR
PB
Y
VIDEO
COMPONENT
2
34
R-AUDIO-L
R-AUDIO-L VIDEO
VIDEO
VHF/UHF
TO TV
FROM ANT.
RF
CHANNEL
IN
OUT
IN
OUT
S-VIDEO
Back View of VCR
Rear TV AV Input Jacks
DVD Player
MENU RECALL
RESETINPUT
CH
POWER
Remote Control
Remote Control
9
INSTALL BATTERIES AS SHOWN (2 AAA, not included)
Notes:
Do not mix old batteries with new ones or mix
different types of batteries together.
Remove the batteries if the remote control will
not be used for a month or more. Weak batter-
ies may leak and cause damage.
(Normal battery life is roughly six months.)
Using the Remote Control
MENU
MUTE
SLEEP
V-GUIDE
DISPLAY
CAPTION
RECALL
RESETINPUT
CH
POWER
VOL
VOL
1
2
3
4
5
6
789
0
4
5
6
789
0
1
2
3
REMOTE CONTROL KEYS
Input Key—Press to select the
program source to watch: TV signal or
signal from DVD Player or other
equipment you have connected to the
A/V jacks.
Menu Key—Use this key with the
/ and – /+ keys to navigate and
adjust features of the on-screen menu
system.(See pages 10 ~ 12.)
Channel Scanning (CH /) and
Volume (VOL – /+) Keys—Press to
scan through the channels in memory
and to adjust the volume.
Mute Key—Press once to suppress the
volume. Press again to restore volume
to previous level.
Caption Key—(See page 12.)
V-Guide Key—(See pages 13 ~ 14.)
Point towards TV
QuickTips
Be sure batteries
are installed
correctly.
Point the remote
control toward the
equipment you want
to operate. Objects
between the remote
control may cause
misoperation of the
remote control
function.
Cannot select
channel with
number keys.
Press “0” in front
of numbers 1~9.
Example: Channel 05.
Adjusting the
volume level: Flash-
ing Right arrow
indicates volume
is increasing and
flashing Left
arrow indicates
volume is
decreasing.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
IMPORTANT NOTE: Spent or discharged batteries must be recycled or
disposed of properly in compliance with all applicable laws. For
detailed information, contact your local County Solid Waste Authority.
(Continued on page 10.
)
10
Remote Control, TV Adjustment and Setup
Reset Key—Press this key twice to restore factory set-
tings. The TV will automatically start Channel Search
and clear all customized settings. These features will
automatically reset:
Picture Adjustments: Color, Tint, Contrast, Bright,
Sharpness, Tone, and Surround
Audio to Stereo
Channel Memory
Caption to OFF
V-Guide to OFF
Language to English
Sleep Timer
Video to TV
If desired, personal settings can be made again using
the menu options.
Power Key—Press to turn TV ON or OFF.
Recall Key—Press to switch between the last two
channels you selected.
Display Key—Press once to display the channel
number. Press twice to display the channel number
continuously. Press again to remove the channel
number.
Number Keys—Press two keys to select a channel.
Example: Press 0 then 6 to select channel 6. For cable
channels 100 through 125, press and hold the 1 key
until C1– appears. Then press the other two
numbers.
Sleep Key—Press this key then press the “0” key to
set the Sleep Timer. The desired time can be set from
30 minutes up to 3 hours in 30-minute increments.
Sleep Timer will switch off the TV automatically.
Note: The Sleep Timer cancels when the TV is
turned off or if a power failure occurs.
The on-screen menu provides the viewer with easy access to adjustments and settings. Just
use the keys on the remote control and follow the on-screen instructions.
HOW TO OPERATE THE ON-SCREEN MENU
1. Press MENU key.
2. Use the /keys to highlight the desired
feature.
3. Use the /+ keys to choose desired option.
(
indicates selected item.)
4. Press the MENU key to exit.
Items with submenus require additional steps.
keys – + keys
Audio
Stereo Mono SAP
Picture/Sound
Auto Manual
Game
Antenna
Cable VHF/UHF
CH. Search
NO Start
CH. Scan Memory C 34 Added
Espanol
Menu Language
English Francais
Press MENU key to exit
TV Adjustment and Setup
QuickTips
The menu will display
on the screen for
approximately 20
seconds. Press MENU
again to redisplay.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
11
12
MENU
MUTE
SLEEP
V-GUIDE
DISPLAY
CAPTION
RECALL
RESETINPUT
CH
POWER
VOL
VOL
1
2
3
4
5
6
789
0
4
5
6
789
0
1
2
3
11
12
REMOTE CONTROL KEYS (CONTINUED)
Audio mode, Adjust Picture/Sound, Channel Search
11
SETTING AUDIO MODE
Select desired sound setting, Stereo, Mono, or SAP (secondary audio program).
Note: Stereo and SAP must be part of the broadcast signal.
1. Choose Stereo, Mono, or SAP from the Audio
options.
Note: The TV will automatically reset to stereo if
unplugged or a power failure occurs.
keys – + keys
AA
AA
uu
uu
dd
dd
ii
ii
oo
oo
SS
SS
tt
tt
ee
ee
rr
rr
ee
ee
oo
oo Mono SAP
ADJUSTING PICTURE/SOUND
For automatic picture/sound adjustment
Choose Sports, Movie,orNews from
the Picture/Sound options.
Adjust the picture/sound manually
1. Choose Manual from the Picture/Sound
options.
2. Press the MENU key to open the
picture/sound settings submenu.
3. Use the / keys to highlight the
picture or sound setting you want
to change.
4. Use the /+ keys to adjust settings.
For automatic game settings
1. Choose Game from the Picture/Sound options.
The screen and sound will automatically change
to factory preset settings.
2. Press the MENU key to exit.
Note: Select the front A/V input jacks by pressing the INPUT key on the remote control.
RESETTING THE ANTENNA/CABLE MODE AND CHANNEL SEARCH
Resetting the Antenna/Cable Mode or CH. (Channel) Search is required only if additional
channels become available, such as moving to
another city or having a cable service installed.
1. Choose Start from the Ch. Search menu options.
QuickTips
The menu will display
on the screen for
approximately 20
seconds. Press MENU
again to redisplay.
Under weak stereo
signal conditions, you
may receive better
quality sound in the
“Mono” position.
Surround sound will
expand the sound
effect while receiving
MTS stereo signals.
When setting the
Antenna mode,
choose Cable if your
TV is connected to a
cable system, other-
wise choose VHF/UHF.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
keys – + keys
Audio
PP
PP
ii
ii
cc
cc
tt
tt
uu
uu
rr
rr
ee
ee
//
//
SS
SS
oo
oo
uu
uu
nn
nn
dd
dd
Auto
MM
MM
aa
aa
nn
nn
uu
uu
aa
aa
ll
ll
Game
keys – + keys
Color
Tint
Contrast
Brightness
Sharpness
Press MENU key to exit
TT
TT
oo
oo
nn
nn
ee
ee
LL
LL
--
--
--
--
--
--
--
--
HH
HH
SS
SS
uu
uu
rr
rr
rr
rr
oo
oo
uu
uu
nn
nn
dd
dd OFF
OO
OO
NN
NN
CH. Scan Memory
Menu Language
Press MENU key to exit
CC
CC
HH
HH
..
..
SS
SS
ee
ee
aa
aa
rr
rr
cc
cc
hh
hh NO
SS
SS
tt
tt
aa
aa
rr
rr
tt
tt
12
Adding/Deleting Channels, Closed-Captioning
ADDING OR DELETING CHANNELS
1. Press the MENU key.
2. Use the / keys to highlight CH. Scan Memory.
3. Press the
+ key to highlight channel number entry area.
4. Enter the channel number you want to add or delete (example): C34. For cable channels
above 99, press and hold the 1 key until C1– – appears. Then enter the other two numbers.
Menu Language
SS
SS
ee
ee
ll
ll
ee
ee
cc
cc
tt
tt
cc
cc
hh
hh
aa
aa
nn
nn
nn
nn
ee
ee
ll
ll
uu
uu
ss
ss
ii
ii
nn
nn
gg
gg
,,
,,
00
00
~~
~~
99
99
kk
kk
ee
ee
yy
yy
ss
ss
PP
PP
rr
rr
ee
ee
ss
ss
ss
ss
MM
MM
EE
EE
NN
NN
UU
UU
kk
kk
ee
ee
yy
yy
t
t
tt
oo
oo
ee
ee
xx
xx
ii
ii
tt
tt
CH. Scan Memory
CC
CC
33
33
44
44
Deleted
5. Press the + key to change the present setting.
Example: Added will change to Deleted. This
takes about three seconds. During that time, the
word “Added” or “Deleted” will become yellow.
6. Use the 0 ~ 9 or keys to choose other chan-
nels to delete or add, or press the MENU key to
exit.
CAPTION1: The main mode used for program captioning (words match
the program you are watching). These captions are generally one or two
lines.
CAPTION2: An alternative mode for program captioning. Caption2 may
be used by the broadcaster to provide captions in another language, such
as, Spanish or French.
TEXT1: This mode is used to display large amounts of text. This text will
appear within a black box that may be nearly as large as the TV screen. Text
displayed in this manner does not generally relate to the program. Captions
may be used by broadcasters to provide weather reports, community
bulletins, etc.
TEXT2: Alternative mode used to display large amounts of text (same as
Text1).
QUIKCAP: Allows captions to toggle on and off with the Mute function. Press the MUTE
key on the remote control to block the TV sound; the captions display automatically. Press
the MUTE key again to restore the sound, the captions will disappear. Quikcap displays
program captions in the Caption1 mode.
SETTING CAPTIONS
1. Press the CAPTION key on the remote control.
2. Press the 0 key on the remote control to select options: OFF, CAPTION1, CAPTION2,
TEXT1, TEXT2, or QUIKCAP.
TWO OUTS AND TWO STRIKES
Caption1/ 2
TONIGHT: BECOMING MOSTLY
CLOUDY WITH A 40 PERCENT
CHANCE OF RAIN. COLD WITH
A LOW IN THE UPPER 30's WEST
WIND AROUND 20 MPH, SHIFT-
ING TO NORTHWEST AROUND
MIDNIGHT. FRIDAY: MOSTLY
CLOUDY AND COLDER WITH
A 50 PERCENT CHANCE OF
RAIN. HIGH IN THE MID 50's.
Text1/ 2
Captioning is text information transmitted along with the picture and sound so it can be dis-
played on the TV screen. Because different types of captions can be transmitted with the TV
signal, separate captioning modes are provided. The captioning modes recognized by this
model are: Caption1, Caption2, Text1, and Text2. Local broadcasters decide which caption
signals to transmit.
QuickTips
Channels deleted
from scan memory
can be selected with
the number keys.
Restoring deleted
channels, use the
on-screen menu to
manually add chan-
nels or start CH.
(Channel) Search
from the menu. It
may take a few
minutes to search
thru the available
channels.
OR
Press the
RESET
key twice.
If Caption Text mode
is selected and no
captioned text is
broadcasted, a black
box may appear and
remain on the TV
screen as shown
below.
To remove this black
box, set captioning to
any mode other than
Text1 or Text2 or
press the RESET key
to cancel captioning
and other customized
settings.
Channel number
will not display
continuously when
captioning is on.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
Closed-Captioning
V-Guide (Parental Control)
13
ABOUT MPAA AND TV PARENTAL GUIDELINES
MPAA and TV Parental Guidelines are rating systems that provide advance cautionary
information to parents about the content of movie and television programming.
The V-Guide system contain both age-based and content-based settings. This gives parents
discretionary ways of choosing appropriate material for their children to view.
Content ratings are represented by the initials D (Suggestive Dialog), L (Adult Language),
S (Sexual Situations), V (Violence), and FV (Fantasy Violence). When programming con-
tains any or all of these conditions, these letters become part of the icon that is displayed on
the TV screen.
A rating icon will generally appear in the upper left hand corner of the TV screen for about
fifteen seconds at the beginning of a program and should be repeated at the beginning of the
second hour of a long program. It may also appear when returning from commer-
cials. There may be other instances when these icons will be displayed as well.
Parents are encouraged to become familiar with these icons and their meanings.
NOTE: THIS FEATURE IS DESIGNED TO COMPLY WITH THE UNITED STATES OF
AMERICA’S FCC V-CHIP REGULATIONS. THEREFORE, IT MAY NOT
FUNCTION WITH BROADCASTS THAT ORIGINATE IN OTHER COUNTRIES.
Use this feature to supervise television viewing for young children. This television can be set to automatically block
programs with content you deem as inappropriate for your children to view, including: suggestive dialog, adult language,
sexual situations, violence, and fantasy violence.
The ability of the television to block the reception of specific programming content depends upon several conditions:
1) The program must be rated, 2) Networks must broadcast the rating code data, 3) Cable companies must transmit the
rating code signal, and 4) The TV must be properly setup to decode the signal.
SETTING MPAA MOVIE RATING
1. Press the V-GUIDE key on the remote control to display menu.
2. Press the + key to switch V-Guide ON.
3. Press the + key again. Then use the / keys to highlight rating.
4. Press the MENU key to Block (B) or Unblock (U) selected rating.
(Arrow indicates selection.)
5. Press the key to return to the V-Guide Options menu.
V-GUIDE
MPAA Movie Ratings
TV Parental Guidelines
Press MENU key to BLOCK
Use , – + keys to select
Press V-GUIDE key to exit
XB
NC17 B
R
R
B
B
PG13 U
PG U
GU
QuickTips
Use the CHANNEL
/
keys
and the VOLUME
/
+
keys to
navigate through
the menus
.
V-Guide feature is
accessible only from
the remote control.
The V-Guide display
remains on screen
for approximately 20
seconds. If it
disappears, press
the
V-GUIDE
key.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
V-Guide (Parental Control)
V-Guide Operation
(Continued on page 14.)
14
V--Guide (Parental Control), Care and Cleaning
QuickTips
When in the
V-Guide menu
system, the
/+
keys allow you to
navigate between the
ratings and the
options menu.
The TV will automati-
cally block (B)
ratings above or
unblock (U) ratings
below selection. For
example, if you block
rating R, NC17 and X
will be blocked as
well.
Blocking TVY7 does
not block higher
ratings.
You can block a
content rating
such as TVPG-V and
still be able to watch
TVPG programs with
ratings of S-L-D
provided TVPG is
unblocked (U).
To temporarily
unblock or view
Blocked (B)
programs, set
V-GUIDE to OFF, or
press the
RESET
key twice to clear all
Blocked (B) ratings
and other cus-
tomized settings.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
SETTING TV PARENTAL GUIDELINES
6. Use the / keys to highlight TV
Parental Guidelines.
7. Press the + key. Then use the /
keys to highlight rating.
8. Press the MENU key to Block (B) or
Unblock (U) selected rating.
( Arrow indicates selection.)
SETTING CONTENT-BASED
GUIDELINES
9. Follow steps 6 and 7. Use the /
keys to highlight Content.
10. Press the MENU key to display the
Content Option menu.
11. Use the / keys to highlight a category
(D-Suggestive Dialog, L-Adult Language,
S-Sexual Situations, V-Violence, FV-Fantasy
Violence).
12. Press the + key. Then use the / keys
to highlight a rating.
13. Press the MENU key to Block (B) or
Unblock (U) selected rating. (Arrow
indicates selection.)
14. Press the V-GUIDE key to exit; or press the
key to return to the Content Options menu.
15. Repeat steps 11 through 13 to Block (B) or
Unblock (U) additional content ratings,
if desired.
TURNING OFF THE V-GUIDE
1. Press the V-GUIDE key.
2. Use the /+ keys to select OFF.
Note: Networks and local stations may
or may not include the content
ratings portion of the TV Parental
Guidelines.
V-GUIDE
MPAA Movie Ratings
TV Parental Guidelines
TVMA B
TV14 B
TVPG B
T
T
V
V
-
-
G
G
B
B
TVY7 U
TV-Y U
Content
Press MENU key to BLOCK
Use , – + keys to select
Press V-GUIDE key to exit
V-GUIDE
MPAA Movie Ratings
TV Parental Guidelines
Press MENU key to set
Use , – + keys to select
Press V-GUIDE key to exit
TVMA B
TV14 B
TVPG B
TV-G B
TVY7 U
TV-Y U
C
C
o
o
n
n
t
t
e
e
n
n
t
t
D-Suggestive Dialog
L-Adult Language
S-Sexual Situations
V-Violence
FV-Fantasy Violence
T
T
V
V
1
1
4
4
B
B
TVPG B
Press MENU key to BLOCK
Use , – + keys to select
Press V-GUIDE key to exit
The surface of the cabinet can be damaged if not properly maintained. Many common household
aerosol sprays, cleaning agents, solvents, and polishes will cause permanent damage to the fine
surface.
1. Unplug the power cord before cleaning the television.
2. Clean the screen and cabinet with a soft dry cloth.
Note:
Never spray liquids on the screen because it can run down and drip onto the
chassis. This may cause component failure not covered under Warranty.
Care and Cleaning
Helpful Hints (Problems and Solutions)
15
Before calling for assistance, please check the condition that most closely resembles your problem in the
following chart, then try the solutions for that condition. Visit our Web site at
www.sanyoctv.com
or call toll free 1-800-877-5032.
Problem: Check these Conditions: Try these Solutions:
Press POWER key.
The sleep timer may have been set.
Unplug TV momentarily.
Adjust antenna.
Try a different channel.
Press RESET key.
Turn off Mixer, Drill, Blender, etc.
Press RESET key twice.
Switch OFF Captions (see page 12).
Try a different channel.
Adjust antenna.
Press RESET key twice.
Press INPUT key.
Switch on external equipment.
Set DVD component output to interlaced.
Try a different channel.
Adjust Volume.
Press RESET key twice.
Select Stereo from Audio on-screen
menu.
Select SAP from Audio on-screen menu.
Select Cable from Antenna on-screen
menu; then start CH. (channel) Search
using the menu.
Select VHF/UHF from Antenna on-screen
menu; then start CH. (channel) Search
using the menu.
Select CH. Scan Memory and manually add
channels or start CH. (channel) search.
Press RESET key to clear setting.
Set V-Guide to OFF or press RESET key.
Select Caption1 or Caption2 (see page 12).
Reselect menu language choice using the
on-screen menu or press RESET key.
Replace batteries.
Aim remote control at front of TV.
TV turns off
automatically.
No picture, poor
picture, or wavy lines
in picture.
Black box on screen.
Poor color or
no color.
Blue Screen with
Video1, Video2, or
Component2 displayed.
No sound, poor sound.
No sound on some
channels.
No TV stereo sound.
No TV SAP sound
No Cable channels
above number 13.
No UHF channels,
VHF OK.
Cannot select or scan
some channels.
No Captioning.
Menu System words
seem misspelled
Remote Control
will not work TV.
Cabinet makes
popping sound.
Check signal (Cable/Ant.) connection.
Power surge protection feature.
Check antenna connections.
May be station trouble.
Brightness or Contrast misadjusted.
Possible interference from household
appliance.
Caption Text Mode without display
information.
Check if program is in color.
Check antenna connections.
Color or Tint misadjusted.
May be station trouble.
Check Audio/Video connections.
Check external equipment connections.
Check DVD setting.
May be station trouble.
May be MUTE function.
Check Audio/Video connections.
Check if station is broadcasting a true MTS
stereo signal.
Check if station is broadcasting a SAP signal.
Cable Channel Indicator C should appear
next to channel number.
Cable Channel Indicator C should not
appear next to channel number.
Channel may be removed from memory.
Check antenna connections.
V-Guide is set to block
programming (see pages 13 ~ 14).
Check if station is broadcasting a Closed-
Caption signal. Select another channel.
May be a different language is selected
.
Check batteries; see if TV is plugged in.
This is a normal condition during warm-up
and cool down of the plastic cabinet parts.
Helpful Hints (Problems/Solutions)
16
Mexico Guarantee
IMPORTADOR:
COMERCIALIZADORA MEXICO
AMERICANA, S.DE R.L. DE C.V.
AV. NEXTENGO N
o
78
COL. SANTA CRUZ ACAYUCAN
DEL. AZCAPOTZALCO, MÉXICO, C.P. 02770
RFC: CMA9109119L0
GUARANTEE
THE APPARATUS THAT YOU HAVE ACQUIRED HAS A ONE YEAR GUARANTEE FOR MANUFACTURING DEFECTS AND
A ONE YEAR SERVICE WARRANTY FROM THE DATE OF PURCHASE GRANTED BY:
COMERCIALIZADORA MEXICO-AMERICANA, S. DE R.L. DE C.V.
UNDER THE FOLLOWING CONDITIONS:
1. TO MAKE THE GUARANTEE EFFECTIVE, SIMPLY SHOW THIS POLICY FILLED OUTBYTHE STORE OR SUPPLIER
UNIT OR THIS SALES INVOICE, WITH THE APPARATUS IN ANY OF THE SERVICE CENTERS INDICATED ON THIS
GUARANTEE.
2. IF THE FAULT IS ATTRIBUTED TO AMANUFACTURING DEFECT, THE APPARATUS WILL BE REPLACED OR YOUR
MONEY REFUNDED. DURING THE 30 DAYS SUBSEQUENT TO THE PURCHASE THE GUARANTEE WILLBE VALID
AT THE STORE WERE THE APPARATUS WAS PURCHASED, PRESENTING THE ABOVE DOCUMENTS.
3. REPAIR TIME WILL NEVER BE MORE THAN 30 DAYS. IF THIS TIME HAS ELAPSED, AND THE PRODUCT ISN’T
REPAIRED, COMERCIALIZADORA MEXICO AMERICANA, S. DE R.L. DE C.V. WILL PROCEED TO EFFECTUATE
THE EXCHANGE FOR AN EQUIVALENT APPARATUS OR THE RETURN OF THE BUYING-SALE COST
RESPECTIVELY.
4. THIS GUARANTEE WILL COVER ITS TOTALITY OF PIECES, COMPONENTS AND SERVICE REPAIR OF PRODUCT,
AND THE RESPECTIVE COST OF TRANSPORTATION.
THIS GUARANTEE WILL BE NULLAND VOID IN THE FOLLOWING CIRCUMSTANCES:
*
WHEN PRODUCT HAS BEEN USED IN A DIFFERENT CONDITION THAN ITS NORMAL USE.
*
WHEN PRODUCT HASN’T BEEN OPERATING CORRECTLY ACCORDING TO THE INSTRUCTIONS IN THIS MANUAL.
*
WHEN PRODUCT HAS BEEN CHANGED OR REPAIRED BY PERSONS NOT AUTHORIZED FROM THE
MANUFACTURER, IMPORTER, OR MERCHANT RESPONSIBLE RESPECTIVE.
CENTRO DE SERVICIO Y LUGAR DONDE OBTENER PARTES,
COMPONENTES, CONSUMIBLES Y ACCESORIOS:
SUCURSAL VALLEJO SUCURSAL MINERVA
Poniente 126 N
o
288 B Silos N
o
135, Col. Minerva
Col. Nueva Vallejo Deleg. Iztapalapa
México, D.F. México, D.F. 09810
Tels. 5567-5378 Tels. 5646-4551
5368-0105, 8589-8033 5646-4550
DESCRIPTION: ________________________________ BRAND: __________________ MODEL:__________________
CLIENT’S NAME: __________________________________________________________________________________
ADDRESS: ______________________________________________________________________________________
EXTERIOR NUMBER: _______________________ INTERIOR NUMBER: _______________________
SUB DIVISION: ____________________________________________ STATE/DELEGATION: _______________________
TELEPHONE: _____________________________________________
STAMP, DATE AND SIGNATURE
OF
STORE
DESCRIPTION: Television
BRAND: SANYO
MODEL: DS20424
Mexico Guarantee
ONE-YEAR LIMITED WARRANTY
THIS LIMITED WARRANTY IS VALID ONLY ON SANYO TELEVISIONS PURCHASED AND USED IN THE
UNITED STATES OF AMERICA, CANADA, AND PUERTO RICO, EXCLUDING THE UNITED STATES’ OTHER
TERRITORIES AND PROTECTORATES. THIS LIMITED WARRANTY APPLIES ONLY TO THE ORIGINAL PUR-
CHASER, AND DOES NOT APPLY TO PRODUCTS USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
FOR ONE YEAR from the date of purchase, Sanyo Manufacturing Corporation will replace any defective TV.
To insure proper warranty exchange, keep the original sales receipt for evidence of purchase. Return the
defective TV to the retailer along with the receipt and the included accessories, such as the remote
control. The defective TV will be exchanged for the same model, or a replacement model of equal value,
if necessary. Replacement model will be contingent on availability and at the sole discretion of Sanyo
Manufacturing Corporation.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
OBLIGATIONS
For one year from the date of purchase, Sanyo Manufacturing Corporation warrants this product to be free from
defects in material and workmanship under normal use and conditions. Should replacement be necessary under
this warranty for any reason due to manufacturing defect or malfunction during the first year from date of origi-
nal purchase, Sanyo Manufacturing Corporation will provide a new TV via exchange at the retailer.
For customer assistance, whether during or out of the warranty period, call toll free 1-800-877-5032.
Weekdays 7:30 AM – 7:00 PM Central Time
Saturday 7:30 AM – 4:00 PM Central Time
This warranty expresses specific contractual rights; retail purchasers may have additional statutory rights which
vary from state to state.
(EFFECTIVE: August 1, 2002)
For your protection in the event of theft or loss of this product, please fill in the information requested
below and KEEP IN A SAFE PLACE FOR YOUR OWN PERSONAL RECORDS.
Model No.______________________________ Date of Purchase _________________________
Serial No.______________________________ Purchase Price___________________________
Where Purchased_________________________
(Located on back of unit)
AS
Sanyo Manufacturing Corp.
3333 Sanyo Road, Forrest City, AR 72335
This symbol on the nameplate means the product is Listed by Underwriters’ Laboratories Inc. It is
designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and
electrical hazards.
United States and Canada Warranty
United States and Canada Warranty
17
18
Español Manual de Instrucciónes / Contenido
Importantes Medidas de Seguridad . . . . . . . . . . . . . . . 19
Características . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Especificaciones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Ajustes Básicos y Conexiones . . . . . . . . . . . . . . . . . . . . 21
Panel Frontal y Posterior . . . . . . . . . . . . . . . . . . . . . . . . 22
Utilizando Las Entradas de Componente
de Video / Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Conectando una Reproductor de DVD . . . . . . . . . . . . 23
Usando Las Entradas Frontales de Audio / Video . . . . . . 24
Conecte un Juego de Video u otros equipos . . . . . . . 24
Usando las Entradas de Audio/Video . . . . . . . . . . . . . . 25
Conectando una VCR o Reproductor de DVD . . . . . . 25
Usando el Control Remoto . . . . . . . . . . . . . . . . . . 26 ~ 27
Ajustes del TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Como Operar el Menú en Pantalla . . . . . . . . . . . . . . . 28
Ajuste el modo de Audio . . . . . . . . . . . . . . . . . . . . . . 28
Ajuste de Imagen/Sonido . . . . . . . . . . . . . . . . . . . . . . 28
Búsqueda de Canales . . . . . . . . . . . . . . . . . . . . . . . . . 29
Agregando o Borrando Canales . . . . . . . . . . . . . . . . . 29
Informacíon de Guía-V . . . . . . . . . . . . . . . . . . . . . . . . . 30
Operación de Guía-V (Control Paternal) . . . . . . . . 30 ~ 31
Transmisión Captada . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Cuidado y Limpieza . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Sugerencias Útiles—problemas / soluciones . . . . . . . 33
Garantía (México) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Garantía (Estados Unidos y Canadá) . . . . . . . . . . . . . . . 35
Bienvenido al mundo SANYO
Gracías por comprar un Televisor a Color Sanyo. Usted hizo una excelente selección por Funcionamiento,
Estilo, Confiabilidad, y Precio. El TV esta diseñado con instrucciones de fácil ajuste y operación en
pantalla.“Lea este manual antes ensamblar (o usar) este producto.” ¿ Necesita ayuda? Visite nuestro
sitio en internet en www.sanyoctv.com o llame sin costo al 1-800-877-5032.
“Como un Asociado de ENERGY STAR
®
,” Sanyo Manufacturing
Corporation, ha determinado que este producto cumple con
los lineamientos en eficiencia energética de ENERGY STAR
®
.
CONTENIDO
ESPAÑOL Manual de Instrucciónes
ENERGY STAR
Importantes Medidas de Seguridad
19
PRECAUCION
RIESGO DE TOQUE ELECTRICO NO ABRIR!
PRECAUCION : PARA REDUCIR EL RIESGO DE TOQUE ELECTRICO, NO QUITE LA CUBIERTA (O
LA TAPA TRASERA). NO HAY PARTES ADENTRO QUE LAS PUEDA REPARAR EL USUARIO.
REFIERASE A PERSONAL CALIFICADO PARA REPARAR EL APARATO.
ESTE SIMBOLO INDICA QUE VOLTAJES PELIGROSOS QUE CONSTI-
TUYEN UN RIESGO DE TOQUE ELECTRICO ESTAN PRESENTES DENTRO
DE ESTA UNIDAD.
ESTE SIMBOLO INDICA QUE HAY INSTRUCCIONES IMPORTANTES DE
OPERACION Y MANTENIMIENTO EN LA LITERATURA QUE SE ANEXA A
ESTA UNIDAD.
ADVERTENCIA : PARA REDUCIR EL RIESGO DE FUEGO O TOQUE ELECTRICO, NO EXPONGA ESTE
APARATO A LLUVIA O HUMEDAD.
IMPORTANTES MEDIDAS DE SEGURIDAD
PRECAUCION : POR FAVOR SIGA TODAS LAS ADVERTENCIAS EN EL PRODUCTO Y EN LAS INSTRUCCIONES DE OPERA-
CION. ANTES DE OPERAR EL PRODUCTO, POR FAVOR LEA TODAS LAS INSTRUCCIONES DE OPERACION Y SEGURIDAD.
GUARDE ESTA LITERATURA PARA SU REFERENCIA.
Siga todas las instrucciones. . .
Colocando el aparato
1. No coloque su aparato en carrito, pedestal, anaquel o mesa que sean inesta-
bles. Heridas serias a un individuo, y avería al aparato, pueden resultar si
este cae. Su vendedor puede recomendar carritos y pedestales
o anaqueles e instrucciones para montaje en la pared. Una com-
binación de aparato y carrito deberá de ser movida con cuidado.
Paradas rápidas, fuerza excesiva, y superficies irregulares
pueda causar que la combinación de aparato y carrito se volteen
y caigan.
2. Las ranuras y aperturas en el gabinete y en la parte trasera e inferior fueron
provistas para ventilación del aparato. Para asegurar una operación confiable
del aparato y protejerlo de sobrecalentamiento, estas aperturas no deberán de
ser tapadas o cubiertas. Las aperturas nunca deberán de ser cubiertas con un
trapo u otro material, y las aperturas de la parte inferior no deberán de ser
tapadas poniendo la unidad en una cama, sofá, alfombra, u otra superficie
similar. Este aparato nunca deberá de ser puesto cerca o sobre radiadores de
calor. Este aparato nunca deberá de ser puesto en instalaciones tales como
libreros a no ser que haya una adequada ventilación en tales instalaciones.
3. No exponga el aparato a lluvia o a uso cerca de agua . . . por ejemplo, cerca
a una bañera, una alberca, un lavabo, en un sótano húmedo, etc.
Conectando la Antena Externa
PROTECCION EN CONTRA DE RAYOS ELECTRICOS PARA SU ANTENA Y APARATO DE
ACUERDO A LAS INSTRUCCIONES DEL CODIGO NACIONAL ELECTRICO (EUA).
4. Si una antena exterior es conectada al receptor, asegúrese que el sistema de
antena esté aterrizado para proveer alguna protección en contra de impulsos de
voltaje y la acumulación de cargas estáticas. El articulo 810 del código nacional
eléctrico de los Estados Unidos de América (National Electrical Code,
ANSI/NFPA 70), provee información con respecto al aterrizamiento correcto del
mástil y la estructura de soporte, el aterrizamiento del alambre a la antena en
una unidad de descarga, el tamaño de los conductores de aterrizamiento, la
localización de la unidad de descarga, conexión a los electrodos de aterriza-
miento, y requerimientos para los electrodos de aterrizamiento.
Una antena exterior no deberá de ser localizada en la vecindad de líneas de
potencia que pasen por encima de otros circuitos de luz eléctrica o de potencia,
o en donde pueda caer sobre tales líneas de potencia o circuitos. Cuando se
instale un sistema de antena externa, se debe de tener cuidado extremo en no
tocar tales líneas de potencia o circuitos ya que contacto con ellos puede llegar
a ser fatal.
Conectando el cordon de potencia
5. Este producto debe ser operado solamente con el tipo de cordón de potencia
indicado en la etiqueta. Si usted no esta seguro del tipo de alimentación en su
casa, consulte a su distribuidor de este producto, o a la compañía de
suministro eléctrico. Este producto esta equipado con cordón de potencia
polarizado (una de las navajas de la clavija es más ancha, que la otra). Esta
clavija debe de ajustar en el toma corriente de una manera solamente. Esta
característica es una medida de seguridad. Si usted no puede insertar la clavija
totalmente en el toma corriente, trate invirtiendo la clavija.Si la clavija continua
floja en el toma corriente, llame a su electricista, para reemplazar su toma
corriente obsoleto. No deshabilite el propósito de seguridad de esta clavija
polarizada. No sobre cargue los toma corrientes de pared, extensiones
eléctricas, o receptáculos integrales, ya que esta condición puede resultar en
un riesgo de fuego o descarga eléctrica.
6. Los cordones de potencia deben ser direccionados de tal manera que no
puedan ser pisados o dañados con enseres colocados a un lado arriba del
cordón de potencia. ponga una particular atención a los cordones de
potencia y clavijas, receptáculos de toma corrientes, y el punto donde ellos
salen del producto.
Limpieza
7. Antes de limpiar, desconecte la unidad del receptáculo de la pared. No
aplique limpiadores líquidos o en aerosol directamente a la unidad. Utilice
un trapo seco para limpiar.
Servicio y Reparación
8. Desconecte el aparato del receptáculo de pared y refiera servicio a personal
de servicio eléctrico calificado bajo las siguientes condiciones :
A Si el cordón de potencia o el conector están averiados o raídos.
B. Si líquido ha sido derramado en el aparato.
C. Si el aparato ha sido expuesto a lluvia o agua.
D. Si el aparato ha sido tirado o el gabinete a sido averiado.
E. Si el aparato exhibe un cambio perceptible en funcionamiento.
F. Si el aparato no opera normalmente siguiendo las instrucciones de
operación, ajuste solamente aquellos controles que han sido cubiertos en
las instrucciones de operación. Ajuste impropio de otros controles puede
resultar en avería al aparato y posiblemente requiera de trabajo extensivo
por un técnico calificado para restaurar el aparato a su operación normal.
9. Cuando se termine cualquier servicio o reparación, requiera del técnico de ser-
vicio confirmación de que solo Partes Autorizadas de Remplazo de Fabrica que
tengan las mismas características que las partes originales hayan sido usadas,
y que verificaciones de seguridad rutinarias hayan sido llevadas a cabo para
determinar que el aparato se encuentra en condiciones seguras de operación.
Substituciones no autorizadas pueden resultar en fuego, toque eléctrico u
otros peligros.
10. Nunca adicione accesorios que no han sido especificamente diseñados
para uso con este aparato.
11. Para protección adicional durante una tormenta eléctrica, o cuando el aparato
es dejado sin atención ni uso durante largos periódos de tiempo,
desconéctelo del receptáculo de la pared y desconecte la antena. Esto evitará
daños al aparato debido a rayos o a cambios bruscos en el voltaje de línea.
12. Nunca introduzca ningún tipo de objetos a través de las ranuras, ya que el
contacto con componentes de alto voltaje pueden poner en corto dichas
componentes que pueden resultar en incendios o descargas eléctricas,
Nunca derrame líquidos o cualquier tipo de productos.
EJEMPLO DE ATERRIZAMIENTO DE ANTENA DE ACUERDO AL CODIGO
NACIONAL ELECTRICO (National Electrical Code, ANSI/NFPA 70)
NEC - NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
“Nota al instalador del sistema de cable CATV :
Este recordatorio es dado para llamar la atención del instalador del sistema de cale CATV
al Articulo 820-40 del NEC que provee guias para el aterrizamiento adecuado y, en particu-
lar, especifica que la tierra del cable deberá de estar conectada al sistema de tierra del
edificio, tan cercano al punto de entrada del cable como sea practico.”
20
Características / Especificaciones
Menú en Pantalla Trilingüe
Búsqueda Automática de
Canales
Apagado Automático
Transmisión Captada /
Quikcap
Controles digitales de Imagen
desplegados en Pantalla
MTS sonido estereofónico/
sonido SAP
Tonos de piel por ajuste
Automático
Ajustes de Fabrica para
Imagen/Sonido
Frontal Ambient Sonido
Tono
V-Guide (Control Paternal)
Mode de Jeugo
Entrada de Audio/Video
Componente 480i
Entradas de Audio/Video
(Frontal (AV!), Posterior (AV2)
Entrada de S-Video
Cronómetro para Dormir (3 horas)
Reajuste de TV
Sistema de sintonía de 181
canales
VHF Canales 2-13
UHF Canales 14-69
Cable TV (CATV) 1, 14-125
Sintonía Fina Automática
VHF y Canales de Cable
Control Remoto
0~9 Selección de Canales Numerados
Búsqueda de Canales
Volume Mute
Power Recall
Display Sleep
Caption Reset
Menu V-Guide
Input
TAMAÑO DEL TUBO DE IMAGEN (Pantalla de Realmente Plana)
(Medido Diagonalmente) . . . . . . . . . . . . . . . . . . . . . . . 20-pulgadas
RESOLUCIÓN DE IMAGEN . . . . . . . . . . . . . . . . . . . . . . . . . 260 Líneas
Entrada de Video
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 Líneas
ENTRADA . . . . . . . . . . . . . . . . . . . . . . . . . . . UHF/VHF/CATV 75
FRECUENCIA DE OPERACION . . . . . . . . . . . . . . . . . . . . . . . . 60Hz.
TENSION DE ALIMENTACION . . . . . . . . . . . . . . . . . . . . . . . . . 120
V~CONSUMO DE CORRIENTE . . . . . . . . . . . . . . . . . . . . . . 65 watts
DIMENSIÓN HORIZONTAL (Ancho) . . . . . . . . . . 23.1 in. (588mm)
DIMENSIÓN VERTICAL (Alto) . . . . . . . . . . . . . . . 18.3 in. (466mm)
DIMENSIÓN EN PROFUNDIDAD (Grosor) . . . . . .19.4 in. (493mm)
PESO (APROX.) . . . . . . . . . . . . . . . . . . . . . . . . 53.5 lbs. (24.3 Kg.)
SONIDO (2 Bocinas) . . . . . . . . . . . . . . . . . . . . . Tamaño: 5x9 cm
AMPLIFICADOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Interon 1W/canal
ENTRADAS DE AV . . . . . . . . . . . . . . . . . . . . . Entrada de Video (2)
. . . . . . . . . . . . . . . . .Entrada de Audio (2-R/L – Frontal/Posterior)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .S-Video
ENTRADAS DE COMPONENT 480I
AUDIO/VIDEO . . . . . . . . . . . . . . . . . . . . Entrada (Y, Pb, Pr – R/L)
PRECAUCION : Las Regulaciones de FCC declaran, que las modificaciones no apropiadas o cambios no
autorizados a esta unidad, pueden anular la autoridad del usuario para operar la unidad.
Características
Especificaciones
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52

Sanyo CRT Television DS20424 Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à