Maytag MHW4100DW0 Le manuel du propriétaire

Marque: Maytag

Modèle: MHW4100DW0

Catégorie: Machines à laver

Taper: Le manuel du propriétaire

se Care ide

ided'utilisation d'entretien

FRONT-LOADINGAUTOMATICWASHER

LAVEUSEAUTOMATIO.UEDECHARGElViENTFRONTAL

Para obtener acceso

al Manual de uso v cuidado

en espanol, o para obtener

informaci6n adicional acerca

de su producto, visite:

www.maytag.com

If you have any problems or questions, visit us at www.maytag.com

Pour tout probleme ou question, consulter www.maytag.ca

W10649249B

W10649250B-SP

Designed to use only HE

High Efficiency detergents.

Con£ue pour I'utilisation

d'un d_tergent haute

efficacit_ seulement.

NSF Protocol P351 Protocole NSF P351

Allergen Reduction Performance of Residential Performance de reduction des allergSnes pour les laveuses

and Commercial, Family-Sized Clothes Washers de format familial & usage residentiel ou commercial

TABLEOF CONTENTS

WASHERSAFETY..................................................................................2

ACCESSORIES.......................................................................................3

CONTROL PANELAND FEATURES.................................................4

USING THE DISPENSER DRAWER.................................................6

CYCLEGUIDE..........................................................................................7

USING YOUR WASHER.......................................................................9

WASHER MAINTENANCE................................................................13

TROUBLESHOOTING........................................................................16

WARRANTY...........................................................................................23

ASSISTANCEOR SERVICE............................................. BackCover

TABLEDE MATIERES

SECURITEDE LA LAVEUSE.............................................................24

ACCESSOIRES....................................................................................25

TABLEAUDECOMMANDE ETCARACTERISTIQUES............26

UTILISATIONDUTIROIRDU DISTRIBUTEUR...........................29

GUIDE DE PROGRAMMES.............................................................29

UTILISATIONDE LALAVEUSE........................................................32

ENTRETIENDE LALAVEUSE..........................................................36

DEPANNAGE.........................................................................................39

GARANTIE..............................................................................................50

ASSISTANCEOU SERVICE................................. Couverturearriere

WASHER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all

safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or

"WARNING." These words mean:

You can be kiJled or seriously injured if you don't

immediately follow instructions.

You can be killed or seriously injured if you don't

follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you

what can happen if the instructions are not followed.

iMPORTANT SAFETY iNSTRUCTiONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,

including the following:

[] Read all instructions before using the washer.

[] Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline,

dry=cleaning solvents, other flammable, or explosive

substances as they give off vapors that could ignite or

explode.

[] Do not add gasoline, dry=cleaning solvents, or other

flammable, or explosive substances to the wash water.

These substances give off vapors that could ignite or

explode.

[] Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used

for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not been

used for such a period, before using the washing

machine, turn on all hot water faucets and let the water

flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame during

Do not allow children to play on or in the washer. Close

supervision of children is necessary when the washer is used

near children.

Before the washer is removed from service or discarded,

remove the door or lid.

[] Do not reach intothe washer if the drum, tub or agitator is

moving.

[] Do not install or store the washer where it will be exposed to

the weather.

[] Do not tamper with controls.

[] Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in

published user-repair instructions that you understand and

have the skills to carry out.

[] See "Electrical Requirements" located in the installation

instructionsfor grounding instructions.

this time.

SAVE THESE iNSTRUCTiONS

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other

reproductive harm.

ACCESSORIES

Customize your new washer and dryer with the following

genuine Maytag accessories. For more information on options

and ordering, contact your dealer, call us at 1-800-901-2042,

or visit: www.maytag.com/accessones.

In Canada, call 1-800-807-6777, or visit: www.maytag.ca.

15" Pedestal

Color-matched pedestals raise the washer

and dryer to a more comfortable working

height. The large drawer provides convenient

storage.

Stack Kit

If space is at a premium, the stack kit

allows the dryer to be installed on top

of the washer.

CONTROLPANELAND FEATURES

Not all features and cycles are avadable on all models,

NOTE: The control panel features a sensitive surface that responds to a light touch of your finger, To ensure your selections are registered,

touch the control panel with your finger tip, not your fingernail, When selecting a setting or option, simply touch its name.

Model MHW71 00D

Model MHW5400D

L......L_'-

Model MHW4100D

[

PowerWash co [d

wash

bedd,_g wrlr_k[ _

r_ontrol

,ap_o ",Jeh_ates

Nag!]

_aqlrlZe

d_OIP _[eaN _=:_3her

I,,11

hold tostart

e_t_a

i Low h_gh%_ln _,peed w _ m

r----J

eftra _ _ 8P'ay

' .......

r, add a _- m_nt

I .... i

I'b"_! I

POWER/CANCEL

Touch to turn the washer on and off. Touch to stop/cancel

a cycle at any hme.

NOTE: Turning the Wash Cycle knob wdl also turn the washer

on and off.

WASH CYCLE KNOB

Turn the knob to select a cycle for your laundry load.

An LED wdl hght up for the cycle selected.

NOTE: The Clean Washer with affresh _ LED will flash when the

washer has run 30 wash cycles as a reminder to run the Clean

Washer with affresh _cycle.

See "Cycle Guide" for detaded descriphons of cycles.

NOTE: For best results when using the Overnight Wash & Dry

cycle, use for loads weighing 2.5 pounds and less, such as a

soccer uniform or a running tank and shorts.

O START

Touch and holduntilthe lightabove START comes on tostarta

cycle,or touchonce whilea cycleisinprocess topause it.Ifyou

want to add a garment,you can touch START when the "Add a

Garment" LED ison.

O LED DISPLAY AND SETTINGS

When you select a cycle, its default settings will light up and the

Estimated Cycle Time will be displayed. Factors such as load size,

wash temperature, and water pressure may affect the time shown in

the display during the cycle. Tightly packing garments, unbalanced

loads, or excessive suds may cause the washer to adjust the cycle

time, as well.

Touch the desired setting along the right of the display to adjust.

See "Cycle Guide" for available settings on each cycle. Not all

settings are available with all cycles.

Temperature

The recommended wash temperature is preset for each cycle. You

may also select a wash temperature based on the type of fabric

and soils being washed. For best results, follow the garment label

instructions. All wash temperatures feature a cold rinse.

Soil Level

The Soil Level setting (wash time) is preset for each wash cycle.

For most loads, use this preset soil level. When you change the

soil setting, the cycle time will increase or decrease in the Estimated

Cycle Time display.

For heavily soiled and sturdy fabrics, use the Soil Level setting to

select more wash time. For lightly soiled and delicate fabrics, use

the Soil Level setting to select less wash time. Lower soil level

settings will help reduce tangling and wrinkling.

Spin Speed

This washer automatically selects the spin speed based on the

cycle selected. Some preset speeds can be changed.

[] Higher spin speeds mean shorter dry times, but may

increase wrinkling in your load.

[] Lower spin speeds reduce wrinkling, but will leave

your load more damp.

DELAY START

Use + and - to delay the start of the wash cycle by 9 to 12 hours,

depending on model. To turn off Delay Start, use + and - to set the

delay time to "01'or touch POWER/CANCEL

O CYCLE STATUS LIGHTS

NOTE: Not all Cycle Status Lights are available

on all models. iiiiiiii_i__i_i!!_i!_ii_!!_!!!!!_!__!!_____i_!__i__i__i__i__i__i__i__i__i__i__i__i__i__i__i_i__i_ii__ii_i__i__i__i__i__i__i__i__i__i_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_i_ii

_!i¸!i¸!i¸!_!!_!_ii!_i_i_i!_ii_i_ii_ii_ii!_i_i_i_i_i_i_i_i_i_i_!i_!i_!i!_!_i!_i!_i!_i!_i!_i;_!_i_i!i

Delay

If a Delay Start is set, the Delay indicator will

light and the delay time will count down in the

display.

Door Locked

Door Locked will light to indicate that the door

is locked and cannot be opened without first

pausing or canceling the cycle.

Sensing

When START is touched and held, the washer

will first perform a self-test on the door lock

mechanism and the sensing light will come on.

You will hear a click, the drum will make a partial turn, and the

door will click again as it unlocks briefly. The door will click one

more time when it locks again.

Once the door has locked the second time, the washer will

begin tumbling and adding water. This sensing process will

continue throughout the cycle. You may also hear water flowing

through the dispenser, adding detergent to the load.

After the load size is sensed, the estimated time based on load

size will be displayed. The actual cycle time may be lengthened;

however, the display will continue to show the estimated time.

The sensing light will blink once a second at various times

during the cycle, such as when the washer is reducing extra

suds.

Add a Garment

When "Add a Garment" is lit, you may pause the washer, open

the door, and add items. Touch and hold START to start the

washer again.

Steaming

This will light to show that the cycle is using a steam boost for

added cleaning power.

Done

Once the cycle is complete, this light will come on. Remove

the load promptly for best results. The Done indicator is also lit

during Fresh Hold :" or Fresh Spin TM option.

OPTIONS

Touch to activate additional wash options or additional features on

the washer. Not all options are available on all models.

Fresh Hold _ Option (on some models)

The Fresh Hold _ option will periodically tumble the load after

the end of the cycle for 12 hours while the integrated fan

circulates air through the washer to reduce humidity. To turn

on the Fresh Hold :"option, touch Fresh Hold. If, however, the

Fresh Hold :" option is turned on, it will stay on for all future

cycles until turned back off - the washer remembers the last

on/off status set. To turn off the Fresh Hold :" option, touch

Fresh Hold.

You may also activate the Fresh Hold _option without running

a cycle by touching and holding POWER/CANCEL for one

second, then touching and holding Fresh Hold for 3 seconds,

then touching and holding START for 3 seconds.

To turn off the Fresh Hold" option when it is running, touch

POWER/CANCEL.

NOTE: The door will lock while the Fresh Hold _option is

active. To cancel the option and unlock the door, touch

POWER/CANCEL

Fresh Spin TM Option (on some models)

The Fresh Spin T''option will periodically tumble the load after

the end of the cycle for up to 6 hours to reduce humidity.

To turn on the Fresh Spin T''option, touch Fresh Spin.

If, however, the Fresh Spin TM option is turned on, it will stay

on for all future cycles until turned back off - the washer

remembers the last on/off status set. To turn off the Fresh

Spin TM option, touch Fresh Spin.

You may also activate the Fresh Spin T''option without

running a cycle by touching and holding POWER/CANCEL

for one second, then touching and holding Fresh Spin for

3 seconds, then touching and holding START for 3 seconds.

To turn off the Fresh Spin"' option when it is running, touch

POWER/CANCEL.

NOTE: The door will lock while the FreshSpin T''option is active.

Tocancel the option and unlock the door, touch POWER/

CANCEL.

_ team for Stains

The Steam for Stains option adds additional soak and

wash time to many cycles to help remove tough stains, as well

as a steam boost for added cleaning power. An integrated

heater helps to maintain optimal wash temperatures. See the

"Cycle Guide" for cycles that allow the Steam for Stains option.

_ Extra Rinse

Activate this option to add an extra rinse to most cycles.

_ ycle Signal

Use this option to turn on or off the signal that sounds at end

of cycle.

To turn off the tones that sound when a setting is touched:

Touch and hold CYCLE SIGNAL for about 3 seconds.

Repeat to turn them on.

_ Control Lock

Touch and hold for 3 seconds to lock the controls

to avoid unwanted changes or operation. Touch and hold

3 seconds again to unlock. For each second CONTROL

LOCK is held down, the display will count down one

second: you will see "3_' then "2_' then "1 _'You may

still touch START to pause the cycle, or touch POWER/

CANCEL to turn off the washer. 5

CONTROLPANELAND FEATURES

_HE detergent

_ Liquid fabric

softener

_ Chlorine bleach

O DISPENSER DRAWER

The dispenser drawer gives you the convenience of automatically

adding HE detergent, liquid chlorine bleach, and liquid fabric

softener to the wash bad at the proper time. See "Using the

Dispenser Drawer" for information on using the dispenser drawer.

High Efficiency "H E" detergent compartment

This compartment holds liquid or powdered HE detergent for

your main wash cycle.

Liquid fabric softener compartment

AutomaticaJiy dilutes and dispenses Jiquid fabric softener at

the optimum time in the cycle.

m Use onJy liquid fabric softener in this dispenser.

Liquid chlorine bleach compartment

AutomaticaJiy dilutes and dispenses Jiquid chJorine bJeach at

the optimum time during the first rinse after the wash cycle.

This compartment cannot dilute powdered bJeach,

Choosing the Right Detergent

Use only High Efficiency detergents. The package will be marked

"HE" or "High Efficiency/' Low-water washing creates excessive

sudsing with a non-HE detergent. Using non-HE detergent will likely

result in longer cycle times and reduced rinsing performance, it may

also result in component failure and, over time, buildup of mold or

mildew. HE detergents are low-sudsing and quick-dispersing to

produce the right amount of suds for the best performance. They

hold soil in suspension so it is not re-deposited onto clean clothes.

Follow the manufacturer's instructions to determine the amount of

detergent to use.

Use only High Efficiency (HE) detergent.

USING THE DISPENSER DRAWER

1. Open the dispenser drawer.

2. Add laundry products as described in steps 4-6 in the

"Using Your Washer" section.

3. Slowly close the dispenser drawer. Make sure it is

completely closed.

NOTE: A small amount of water may remain inthe dispensers from

the previous wash cycle. This is normal.

Adding H E detergent to dispenser

SeJector

Pour a measured amount of HE

detergent into detergent compartment.

For powdered detergent, lift the selector

to the high position, For liquid detergent,

push down the selector to the low

position,

[H E detergent

compartment

Use on/y High Efficiency

(HE) detergent.

SeJector

in low

Powdered detergent:

Lift the seJector to the high

position.

Liquid detergent:

Push down the seJector to the

Jow position.

Do not overfill; adding too much detergent may cause

detergent to be dispensed into the washer too early,

IMPO RTANT:

m Do not add single-dose laundry packet to dispenser drawer,

m Use powdered detergent when using the Delay Start option,

Liquid detergent may seep out before the wash begins,

CYCLEGUIDE

Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle, options, and settings that best

fit the load being washed. Not all settings are available with each cycle, and some options cannot be used together.

NOTES:

[] Not all cycles and options are available on all models

[] All wash temperature selections feature a cold rinse.

[] Not all temperatures or spin speeds are labeled on the control panel.

F i

terns to wash I

using default Wash Sp n Soi Available

cyclesetUngs: ! Cycle:. Temperature: . Speed: . Level: . Options: . Cycle Details:

Normally soiled

cottons, linens,

sheets, and mixed

garment loads

Bright or darkly

colored cottons,

linens, casual and

mixed loads.

Lightly soiled shirts,

blouses, trousers,

pants, and dresses

Sheer fabrics,

lingerie, sweaters,

and lightly-soiled

shirts, blouses,

trousers, pants,

and skirts

Normally soiled

sheets, pillowcases,

light blankets, or

throws

Small loads of

2-4 lightly soiled

garments

Normal Extra Hot

Hot

Warm

Cool

Cold

Cold Cold

Wash

Wrinkle Extra Hot

Control Hot

Warm

Cool

Cold

Delicates Extra Hot

Hot

Warm

Cool

Cold

Bedding Extra Hot

Hot

Warm

Cool

Cold

Rapid Extra Hot

Wash Hot

Warm

Cool

Cold

Clean

Washer

with

affresh _R

Max Extract"/

Extra High

High

Med

None

Max ExtractT"/

Extra High

High

Med

None

Max ExtractT_/

Extra High

High

Med

Low

None

Max ExtractT_/

Extra High

High

Med

Low

None

Max ExtractT_/

Extra High

High**

Med

Low

None

Max ExtractTV

Extra High

High

Med

Low

None

Extra Heavy

Heavy

Med

Light

Extra Heavy

Heavy

Med

Light

Extra Heavy

Heavy

Med

Light

Extra Heavy

Heavy

Med

Light

Extra Heavy

Heavy

Med

Light

Extra Heavy

Heavy

Med

Light

No clothes in washer

Steam for

Stains*

Fresh Hold°/

Fresh Spin TM

Extra Rinse

Delay Start

Fresh Hold°/

Fresh Spin TM

Extra Rinse

Delay Start

Steam for

Stains*

Fresh Hold°/

Fresh Spin TM

Extra Rinse

Delay Start

Steam for

Stains*

Fresh Hold°/

Fresh Spin TM

Extra Rinse

Delay Start

Steam for

Stains*

Fresh Hold°/

Fresh Spin TM

Extra Rinse

Delay Start

Steam for

Stains*

Fresh Hold°/

Fresh Spin TM

Extra Rinse

Delay Start

Fresh Hold°/

Fresh Spin TM

Delay Start

This cycle combines medium-

speed tumbling and an extra-high-

speed spin. This cycle is designed

to provide the most energy

efficiency.

This cycle uses a concentrated

detergent solution along with cold

water throughout the cycle to

gently lift out stains and care for

fabrics.

This cycle combines low-speed

tumbling and medium-speed spin

for gentle fabric care and reduced

wrinkling.

This cycle combines low-speed

tumbling and low-speed spin for

gentle fabric care and reduced

wrinkling.

The wash action of this cycle is

designed to keep large items from

tangling and bailing up.

Q or small loads (2-4 items) needed

quickly. This cycle combines high-

speed tumbling, a shortened wash

time, and an extra-high-speed spin

for reduced drying times.

Use this cycle every 30 washes to

keep the inside of your washer fresh

and clean. This cycle uses a higher

water level. Use with affresh _ washer

cleaner tablet or liquid chlorine bleach

to thoroughly clean the inside of your

washer. This cycle should not be

interrupted. See "Washer Care_'

IMPORTANT: Do not place garments

or other items in the washer during the

Clean Washer with affresh" cycle. Use

this cycle with an empty wash tub. See

"Washer Care" in "Washer MaintenanceS'

* Steam for Stains option is only available when warm, hot, or extra hot water temperature is selected.

** On some models, the default is Extra High.

continued on next page

Load Size Recommendations

For best results, follow the load size recommendations noted for each cycle.

Q Small load: Fill the washer drum with 3-4 items, not than

1/4 full.

Medium load: Fill the washer drum to about 1/2 full.

Large load: Fill the washer drum up to about 3/4 full.

Extra-large load: Fill the washer drum, but make sure clothes

can tumble freely. For best results, avoid packing tightly.

CYCLEGUIDE

Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle, options, and settings that best

fit the load being washed. Not all settings are available with each cycle, and some options cannot be used together.

NOTES:

[] Not all cycles and options are available on all models

[] All wash temperature selections feature a cold rinse.

[] Not all temperatures or spin speeds are labeled on the control panel.

cycle settings:

Wet load of clothes

Swimwear, items

that need rinsing

Clothing, bedding

and towels requiring

sanitization

Sturdy garments

and household items

exposed to possible

allergens

2-4 lightly soiled

synthetic garments,

athletic uniforms, or

workout wear

Heavily soiled

fabrics

Cycle:

Drain

& Spin

Drain

& Spin

with

Extra

Rinse

Sanitize

Allergent

Overnight

Wash &

Dry

Power

Wash

Temperature:

N/A

Extra Hot

Hot

Warm

Cool

Cold

Extra Hot

Hot

Extra Hot

Hot

Warm

Cool

Cold

Extra Hot

Hot

Warm

Cool

Cold

Speed:

Max ExtractT"/

Extra High

High

Med

Low

None

Max ExtractT"/

Extra High

High

Med

Low

None

Max Extract_V

Extra High

High

Med

Low

None

Max Extract_V

Extra High

High

Med

Max ExtractS"/

Extra High

Max Extract_V

Extra High

High

Med

Low

None

Level:

N/A

Extra Heavy

Heavy

Med

Light

Extra Heavy

Heavy

Med

Light

Extra Heavy

Heavy

Med

Light

Extra Heavy

Heavy

Med

Light

Extra

Heavy

Med

Light

Options:

Fresh Hold°/

Fresh Spin TM

Delay Start

Fresh HoldR/

Fresh Spin TM

Delay Start

Steam for

Stains*

Fresh Hold°/

Fresh Spin TM

Extra Rinse

Delay Start

Steam for

Stains*

Fresh Hold°/

Fresh Spin TM

Extra Rinse

Delay Start

Steam for

Stains*

Fresh Hold

Extra Rinse

Delay Start

Steam for

Stains*

Fresh Hold°/

Fresh Spin TM

Extra Rinse

Delay Start

Cycle Details:

Use Drain & Spin to removeexcess water from the load.

Spin speed can be set to a

lower setting.

Select Drain & Spin; then select

Extra Rinse to add water. The

cycle includes an extra-high-speed

spin. For some fabrics, you may

wish to set the spin speed to a

lower setting.

This cycle eliminates 99.990/0 of

the most common bacteria found

in clothes, sheets, and towels.

The extra hot wash temperature

ensures sanifizafion. Check

recommended wash temperature

of your items. Bacteria tested were

K. pneumonia, R aureginosa, and

S. aureus.

Uses more water to flush out

allergens such as dust mites

and pet dander from normally-

soiled items.

Q his short wash cycle has an

extra-high-speed spin followed

by inermitent tumbling and fan

activation to circulate air through

the clothes.

Use this cycle for extremely soiled

garments and household items that

need additional cleaning power.

* Steam for Stains option is only available when warm, hot or extra hot water temperature is selected.

t" Allergen

Allergen cycle certified by NSF International, an independent, third party testing and certification organization. The certification verified that this

cycle reduced tested allergens by at least 95.0% and maintained the water temperature necessary to kill dust mites. Only the allergen cycle has

been designed to meet the requirements of NSF Protocol P351 for Allergen Reduction Performance effectiveness.

USINGYOURWASHER

Fire Hazard

Never place items in the washer that are dampened

with gasoline or other fiarnmable fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on

it (including cooking oils).

Doing so can result in death, explosion, or fire.

First wash cycle without laundry

Before washing clothes for the first time, if not completed during

the final installation step, choose the NORMAL cycle and run it

without clothes. Use only HE detergent. Use 1/2 the manufacturer's

recommended amount for a medium-size load. This initial cycle

serves to ensure the interior is clean before washing clothes.

1, Sort and prepare your laundry

Sort items by recommended cycle, water temperature, and

colorfastness. Separate heavily soiled items from lightly soiled.

Separate delicate items from sturdy fabrics. Treat stains promptly

and check for colorfastness by testing stain remover products on

an inside seam.

IMPORTANT:

[] Empty pockets. Loose change, buttons, or any small object can

plug pumps and may require a service call.

[] Close zippers, fasten hooks, tie strings and sashes, and remove

non-washable trim and ornaments.

[] Mend rips and tears to avoid further damage to items

during washing.

[] Turn knits inside out to prevent pilling. Separate lint-takers from

lint-givers. Synthetics, knits, and corduroy fabrics will pick up lint

from towels, rugs, and chenille fabrics.

[] Do not dry garments if stains remain after washing, because heat

can set stains into fabric.

[] Always read and follow fabric care labels and laundry

product instructions. Improper usage may cause damage

to your garments.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

f2, Add laundry products

Single-dose laundry packet, Oxi-type boosters, color-safe bleach,

or fabric softener crystals can be added to the drum prior to

adding laundry.

NOTE: Do not add clothes to washer drum prior to adding

laundry products. Always follow manufacturer's instructions.

3.Load laundry into washer

Place a load of sorted clothes loosely in the washer, items need to

move freely for best cleaning and to reduce wrinkling and tangling.

Close the washer door by pushing it firmly until the latch clicks.

[] Depending on load type and cycle, the washer can be fully

loaded, but not tightly packed. Washer door should close easily.

See "Cycle Guide" for loading suggestions.

[] Mix large and small items and avoid washing single items. Load

evenly.

[] Wash small items in mesh garment bags. For multiple items, use

more than one bag and fill bags equally.

USINGYOURWASHER

USING LAUNDRY PRODUCT DISPENSERS

NOTE: Do not add single-dose laundry packets, Oxi-type boosters,

color-safe bleach, or fabric softener crystals to dispensers. They will

not dispense correctly.

,,_=

4, Add H E detergent

Adjust the selector, based on type of HE detergent used

(either liquid or powdered). See "Using the Dispenser Drawer"

instructions on how to use the dispenser.

(if desired)

Pour a measured amount of liquid fabric softener into liquid fabric

softener compartment. Always follow manufacturer's directions for

correct amount of fabric softener based on your load size.

Fabric softener is always dispensed in the last rinse, even if Extra

Rinse is selected.

IMPORTANT: Do not overfill, dilute, or use more than 1/4 cup

(60 mL) of fabric softener. Do not fill past the MAX line. Overfilling

dispenser will cause fabric softener to immediately dispense into

washer.

[] Do not spill or drip any fabric softener onto the clothes.

[] Do not use liquid fabric softener dispenser balls in this washer.

They will not dispense correctly.

Add liquid chlorine bleach to dispenser

(if desired)

Add liquid chlorine bleach to the bleach compartment. Do not

overfill, dilute, or use more than 2/3 cup (165 mL). Do not use

color-safe bleach or Oxi in the same cycle with liquid chlorine

bleach.

[] Always measure liquid chlorine bleach. Use a measuring cup

with a pour spout; do not guess.

[] Do not fill beyond the "MAX" level. Overfilling could cause

garment damage.

7, Touch POWER/CANCEL to turn on

washer (optional)

power!cancel

Slowly close the dispenser drawer. Make sure the drawer is closed

completely, then touch POWER/CANCEL to turn on the washer or

go to Step 8.

8, Select CYCLE*

normal

P_w_rWash

overnigh"_

wash & dry

allerge_

sanitize

cold

wash

wrinkle

contro!

_e}icates

_edding

Appearance may vary.

Turn cycle knob to select your wash cycle. See "Cycle Guide" for

details on cycle features.

9, Adjust settings, if desired*

extra

( lco[d warm hot

temperature

extra

) light reed heavy

SOil {eve_ m m m

max

I sp,n speed )none reed extract

Appearance may vary.

1 0, Select any additional options*

fresh

m hold

steam

m for stains

am extra

rinse

m cycle

signal

control

m lock

hold 3 sees

Appearance may vary.

To add an option to the cycle, touch its name - Fresh Hold/Fresh

Spin, Steam for Stains, Extra Rinse, Cycle Signal, or Control Lock.

To remove an option from the selected cycle, touch the option

again.

1 1, Setting a delayed start

estimated cycle time

The display will show the default settings for the selected cycle.

To adjust a setting, touch its name - Temperature, Soil Level, or

Spin Speed. Adjusting settings will change the Estimated Cycle

Time. Tightly packing the load, unbalanced loads, or excessive

suds may also cause the washer to increase the cycle time.

If you do not want to begin a cycle immediately, you may choose

the DELAY START option. This will delay the start of the wash

cycle by 9 to 12 hours.

To set a delayed start:

1. Touch DELAY START + and - buttons to set the desired delay

time.

2. Touch and hold START to set the delay.The delay countdown

has started when the START light stops blinking.

*Not all options and settings are available with all cycles.

See "Cycle Guide" for available options and settings.

USINGYOURWASHER

1 2, Touch and hold START to begin

wash cycle

hold to start

Touch and hold START to start the wash cycle. To pause

a cycle in progress, touch START once, then touch and

hold again to continue the cycle. To cancel a cycle, touch

POWER/CANCEL

Once you touch and hold START, you will hear the door lock,

unlock, and lock again. The washer door will remain locked

during the wash cycle.

Unlocking the door to add garments:

Ifyou need to open the door to add 1 or 2

missed garments, you may do so while the

"Add a Garment" light is lit.

.- add a garment

Touch START once; the door will unlock

once the washer movement has stopped.

This may take several minutes. Then close

door and touch and hold START again to

restart the cycle.

hold to start

13, Remove garments promptly

after cycle is finished

between the tub and the washer drum.

If you will be unable to remove the load promptly,

use the Fresh Hold "j or Fresh Spin TM option

(depending on model). If selected,

the Fresh Hold '°joption will activate the fan

and tumble the load periodically for up to

1 2 hours. The Fresh Spin TM option will tumble

the load periodically for up to 6 hours. To turn

off the Fresh Hold 1_or Fresh Spin TM option, touch

m [l'eS_

[ 0'0-t

POWER/CANCEL To set the washer so that the Fresh Hold"_/

Fresh Spin TM option does not come on for future cycles, touch Fresh

Hold -_or Fresh Spin TM option.

NOTE:

III The door will remain locked while the Fresh Hold:_/Fresh Spin TM

option is active. To cancel the option and unlock the door, touch

POWER/CANCEL

[] A small amount of water may remain in the dispensers after the

wash cycle is complete. This is normal.

[] This washer has a tight seal to avoid water leaks. To avoid odors,

leave the door open to allow the washer to dry between uses.

WASHERMAINTENANCE

WATER iNLET HOSES

Replace inlet hoses after 5 years of use to reduce the risk of

hose failure. Periodically inspect and replace inlet hoses if

bulges, kinks, cuts, wear, or leaks are found.

When replacing your inlet hoses, mark the date of replacement

on the label with a permanent marker.

WASHER CARE

Recommendations to Help Keep Your Washer Clean

and Performing at its Best

1. Always use High Efficiency (HE) detergents and follow the

HE detergent manufacturer's instructions regarding the

amount of HE detergent to use, Never use more than the

recommended amount because that may increase the rate

at which detergent and soil residue accumulate inside your

washer, which in turn may result in undesirable odor,

2. Use warm or hot water washes sometimes (not exclusively

cold water washes), because they do a better job of controlling

the rate at which soils and detergent accumulate,

3. Always leave the washer door slightly ajar between uses

to help dry out the washer and avoid the buildup of

odor-causing residue,

4. Periodically clean residue from the underside of the glass

window,

Cleaning Your Front Loading Washer

Read these instructions completely before beginning the

routine cleaning processes recommended below. This Washer

Maintenance Procedure should be performed, at a minimum,

once per month or every 30 wash cycles, whichever occurs

sooner, to control the rate at which soils and detergent may

otherwise accumulate in your washer,

Cleaning the Door Seal

1. Open the washer door and remove any clothing or items from

the washer,

2. inspect the colored seal between the door opening and the

drum for stained areas or soil buildup. Pull back the seal

to inspect all areas under the seal and to check for foreign

objects,

3. if stained areas or soil buildup are found, wipe down these

areas of the seal using either of the following two procedures:

a. affresh :" Grit Grabber TM Cloth Procedure:

i, When the cycle is complete, gently pull back the rubber

door seal and clean the entire surface with the rough

side of the Grit Grabber TM cloth.

b. Dilute Liquid Chlorine Bleach Procedure:

i, Mix a dilute bleach solution, using 3/4 cup (177 mL) of

liquid chlorine bleach and 1 gallon (3,8 L) of warm tap

water,

ii, Wipe the seal area with the dilute solution, using

a damp cloth,

iii, Let stand 5 minutes,

iv, Wipe down area thoroughly with a dry cloth and let

washer interior air dry with door open,

IM PORTANT:

[] Wear rubber gloves when cleaning with bleach,

[] Refer to the bleach manufacturer's instructions for

proper use,

WASHER CARE (cont.)

Cleaning the Inside of the Washer

This washer has a special cycle that uses higher water volumes

in combination with affresh '_ Washer Cleaner or liquid chlorine

bleach to thoroughly clean the inside of the washer. Steam

washer models also utilize steam to enhance cleaning in this

special cycle,

NOTE: Read these instructions completely before beginning the

cleaning process,

Begin procedure

1. Clean Washer with affresh :" Cycle Procedure

(Recommended for Best Performance):

a. Open the washer door and remove any clothing or items,

b. Add an affresh '_ Washer Cleaner tablet to the washer

drum,

c. Do not add the affresh "_Washer Cleaner tablet to the

dispenser drawer,

d. Do not add any detergent or other chemical to the washer

when following this procedure,

e. Close the washer door,

f. Select the Clean Washer with affresh '_ cycle,

g. On some models: Select the Fresh Hold"_/Fresh Spin _

option to help dry the washer interior after the cycle is

complete, NOTE: The washer remembers your last option

selection and will use it for future wash cycles until you

deselect that option, While the fan is on, the washer door

will lock. To unlock the door, touch POWER/CANCEL.

h. Touch and hold START to begin the cycle, The Clean

Washer with affresh "_Cycle Operation is described below.

2. Chlorine Bleach Procedure:

a. Open the washer door and remove any clothing or items.

b. Open the dispenser drawer and add liquid chlorine bleach

to the MAX level in both the bleach compartment and

the fabric softener compartment. Either traditional or HE

chlorine bleach can be used,

NOTE: Use of more liquid chlorine bleach than is

recommended above could cause washer damage over time,

c. Close the washer door and the dispenser drawer,

d. Do not add any detergent or other chemicals to the

washer when following this procedure,

e. Close the washer door,

f. Select the Clean Washer with affresh '_ cycle,

g. On some models: Select the Fresh Hold"_/Fresh Spin _

option to help dry the washer interior after the cycle is

complete, NOTE: The washer remembers your last option

selection and will use it for future wash cycles until you

deselect that option, While the fan is on, the washer door

will lock. To unlock the door, touch POWER/CANCEL.

h. Touch and hold START to begin the cycle, The Clean

Washer with affresh "_Cycle Operation is described below.

NOTE: For best results, do not interrupt cycle,

WASHERMAINTENANCE

WASHER CARE (cont.)

Description of Clean Washer with affresh _"Cycle Operation:

1. The Clean Washer with affresh "_cycle, will determine whether

clothing or other items are in the washer.

2. if no items are detected in the washer, it will proceed with

the cycle.

a. if any items are detected in the washer, "rL" (remove load)

will be displayed. The door will unlock. Open washer and

remove any garments from the washer drum,

b. Touch POWER/CANCEL to clear the "rL" code.

c. Touch and hold START to restart the cycle,

3. Steam models only: During the first 20 minutes of the cycle,

it will activate the steamer but the drum will not spin or fill

with water, You may see condensation on the door glass

during this initial phase, if you are using an affresh "_Washer

Cleaner tablet, it will not dissolve completely during the

steam phase, This is normal.

After the cycle is complete, leave the door open slightly to allow

for better ventilation and drying of the washer interior,

Cleaning the Dispensers

After a period of using your washer, you may find some residue

buildup in the washer's dispensers. To remove residue from the

dispensers, remove the drawer and wipe the surfaces with a

damp cloth and towel dry either before or after you run the Clean

Washer with affresh "_cycle, Use an aIFpurpose surface cleaner,

if needed,

iMPORTANT: Dispenser is not dishwasher safe,

Cleaning the Outside of the Washer

Use a soft, damp cloth or sponge to wipe up any spills.

Occasionally wipe the outside of your washer to help keep it

looking new, Use mild soap and water,

iMPORTANT: To avoid damaging the washer's finish, do not use

abrasive products,

CLEAN WASHER CYCLE REMINDER

NOTE: Not all models have the Clean Washer with affresh "_

cycle reminder light:

The Clean Washer with affresh "_ ___J ,_,

LED will flash at the end of a _ ";_<'ean washer

wash cycle when the washer has w_,_

run 30 wash cycles, This is a

reminder to run the Clean Washer with affresh '_ cycle,

If the Clean Washer with affresh "_cycle is not turned on, the LED

will stop flashing at the end of a wash cycle after running 3 more

regular wash cycles, After 30 more wash cycles are completed,

the Clean Washer with affresh '_ LED will again flash at the end

of a wash cycle as a reminder,

tf "_

REMOVING THE DISPENSER

To remove:

1. Pull dispenser drawer out until it stops,

2. Press down on the release tab and pull straight out to

remove the dispenser.

"\.",.,,

3. Lift off cover panel by

pulling straight up,

To replace:

1. Slide cover panel back

onto posts on dispenser,

2. Align edges of dispenser

with guides in washer,

then slide dispenser

back into slot.

NON-USE AN D VACATION CARE

Operate your washer only when you are home, If moving, or

not using your washer for a period of time, follow these steps:

1. Unplug or disconnect power to washer,

2. Turn off water supply to washer to avoid flooding due

to water pressure surges.

3. Clean dispensers, See "Cleaning the Dispensers"

tf "_

WINTER STORAGE CARE

IMPORTANT: To avoid damage, install and store washer

where it will not freeze, Because some water may stay in

hoses, freezing can damage washer, If storing or moving

during freezing weather, winterize your washer,

To winterize washer:

1. Shut off both water faucets, disconnect and drain water

inlet hoses.

2. Put 1 qt. (1 L) of R.V.-type antifreeze in washer drum

and run washer on NORMAL cycle for about 2 minutes

to mix antifreeze and remaining water,

3. Unplug washer or disconnect power,

TRANSPORTING YOUR WASHER

1. Shut off both water faucets, Disconnect and drain water

inlet hoses.

2. If washer will be moved during freezing weather, follow

WINTER STORAGE CARE directions before moving.

3. Disconnect drain hose from drain system and from back

of washer,

4. Unplug power cord,

5. Place inlet hoses and drain hose inside washer drum,

6. Bundle power cord with a rubber band or cable tie to keep

it from hanging onto the ground,

IM PORTANT: Call for service to install new transport bolts,

Do not reuse transport bolts. Washer must be transported

in the upright position, To avoid structural damage to your

washer, it must be properly set up for relocation by a certified

technician,

f REINSTALLING/USING WASHER AGAIN "_

To reinstall washer after non-use, vacation, winter storage,

or moving:

1. Refer to Installation Instructions to locate, level, and

connect washer,

2. Before using again, run washer through the following

recommended procedure:

To use washer again:

1. Flush water pipes and hoses. Reconnect water inlet hoses.

Turn on both water faucets.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

2. Plug in washer or reconnect power.

3. Run washer through NORMAL cycle to clean washer and

remove antifreeze, if used. Use only HE detergent. Use half

the manufacturer's recommended amount for a medium-size

load,

TROUBLESHOOTING

First try the solutions suggested here or visit our webske at www.maytag.com/product_heJp -

In Canada www.maytag.ca for assistance and to possibly avoid a service call.

If you experience Possible Causes 1 Solution

Once any possible issues are corrected, touch POWER/CANCEL once to clear the code. Reselect and restart the cycle.

"Sud" (Excess suds)

appears in display

Excessive suds in washer. Washer is

running a suds reduction routine.

Check for proper water supply.Fn8 followed by En/

(water supply error)

appears in display

Check plumbing for correct drain

hose installation. Drain hose extends into

standpipe farther than 41/2'' (114 mm).

Fn9 followed by En/

(drain pump system

error) appears in display

Not using HE detergent or using too

much HE detergent.

Fn5 followed by En2 Washer door not locking.

(door will not lock)

appears in display

"rL" (remove load) appears Load detected in drum during Clean

in display Washer with affresh "j cycle.

Washer making error beeps Door has not been opened and closed

for at least 3 cycles.

Washer beeps when START Door not closed.

is touched

Allow the washer to continue. Use only HE detergent. Always

measure detergent, and base detergent quantity on load size.

Follow detergent manufacturer's instructions.

Both hoses must be attached and have water flowing to the inlet

valve.

Both hot and cold water faucets must be on.

Inlet valve screens on washer may be clogged.

Remove any kinks in the inlet hose.

Touch POWER/CANCEL once to clear the code. Then touch

POWER/CANCEL again to restart washer. If code appears

again, call for service.

Check drain hose for proper installation.

Make sure the drain hose is not kinked, pinched, or blocked.

Remove any clogs from drain hose.

Use drain hose form and securely attach to drainpipe or tub.

Lower drain hose if the end is higher than 96" (2.4 m) above

the floor.

Use only HE detergent. Always measure detergent and follow

manufacturer's directions based on load size and soil level.

Touch POWER/CANCEL to cancel the cycle. Make sure the

door is closed completely and latching. Check for items in

the washer drum that may be keeping the door from closing

completely.

Remove items from washer drum and restart Clean Washer with

affresh _-_cycle.

This code may appear when the washer is first turned on.

Open and close the door to clear the display.

Close the door completely.

F## E## code other than System error code. Touch POWER/CANCEL once to clear the code. Then touch

as described above appears POWER/CANCEL again to restart washer. If code appears

in display again, call for service.

"lnt" (interrupted) appears in The cycle was paused or cancelled. The washer can take 20 to 30 minutes to stop spinning

display and drain and will display this error code during that time.

Touch POWER/CANCEL once to clear the code. Then touch

POWER/CANCEL again to restart washer.

Clean Washer LED flashing

at end of wash cycle

The washer has run 30 wash cycles and

is indicating a reminder to run the Clean

Washer with affresh "j cycle.

Run the Clean Washer with affresh "_cycle. If the Clean Washer

with affresh "_cycle is not turned on, the LED will stop flashing

at the end of a wash cycle after running 3 more regular wash

cycles. After 30 more wash cycles are completed, the Clean

Washer LED will again flash at the end of a wash cycle as a

reminder.

TROUBLESHOOTING

if you experience

First try the solutions suggested here or visit our website at www.maytag.com/producLhelp -

in Canada www.maytag.ca for assistance and to possibly avoid a service call.

Possible Causes Solution

Vibration, rocking, or Feet may not be in contact with the floor

"walking" and locked.

Washer may not be level.

Load could be unbalanced or too large.

The shipping bolts are still in the back of

the washer.

Clicking or metallic noises Door locking or unlocking.

Objects caught in washer drain system.

Front and rear feet must be in firm contact with floor, and washer

must be level to operate properly. Jam nuts must be tight against

the bottom of the cabinet.

Check floor for flexing or sagging, if flooring is uneven, a 3/4"

(19 mm) piece of plywood under your washer will reduce sound.

See "Level the Washer" in installation instructions.

Avoid tightly packing the load. Avoid washing single items.

Balance a single item such as a rug or jeans jacket with a few

extra items.

item or load not suitable for selected cycle. See "Cycle Guide"

and "Using Your WasherS'

See "Remove transport bolts from washer" in the installation

Instructions.

Gurgling or humming

Rolling or sloshing

and occasional clicking

(on low-speed spin)

Washer may be draining water.

Steel balls in the balancing system are

balancing the load.

The door will lock, unlock, and lock again. You will hear 3 clicks

after touching and holding START. This is normal.

Empty pockets before washing. Loose items such as coins could

fall between washer drum and tub or may block pump. it may be

necessary to call for service to remove items.

it is normal to hear metal items on clothing such as metal snaps,

buckles, or zippers touch against the stainless steel drum.

The pump may make a humming sound with periodic gurgling or

surging as final amounts of water are removed during the spin/

drain cycles. This is normal at certain stages of the cycle.

This is normal at certain stages of the cycle.

Check the following for

proper installation

Water or suds leaking from

door or rear of cabinet

Load not completely

covered in water

Fill hoses not attached tightly.

Fill hose washers.

Drain hose connection.

Check household plumbing for leaks or

clogged sink or drain.

Not using HE detergent or using too

much HE detergent.

Residue on door glass.

Door opened during "Add a Garment_'

Water level not visible on door or does

not cover clothes.

Tighten _Fhose connection.

Properly seat ail four _Fhose flat washers.

Check that the drain hose is properly secured to drainpipe or

laundry tub.

Water can back up out of a clogged sink or drainpipe. Check

all household plumbing for leaks (laundry tubs, drain pipe, water

pipes, and faucets.)

Only use HE detergent. Suds from regular detergents can

cause leaking from the door or rear of cabinet. Always measure

detergent and follow manufacturer's directions based on your

load requirements.

Periodically clean the underside of the glass window to avoid

potential leaks.

Water can drip off the inside of the door when the door is

opened after the start of a cycle.

This is normal for an HE front load washer. The washer senses

load sizes and adds the correct amount of water for optimal

cleaning.

TROUBLESHOOTING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

First try the solutions suggested here or visit our website at www.maytag.com/product_help -

in Canada www.maytag.ca for assistance and to possibly avoid a service call.

if you experience Possible Causes J Solution

Washer won't run or fill,

washer stops working

Check for proper water supply. Both hoses must be attached and have water flowing to the inlet valve.

Both hot and cold water faucets must be turned on.

Check that inlet valve screens have not become clogged.

Check for any kinks in inlet hoses, which can restrict water flow.

Check proper electrical supply. Plug power cord into a grounded 3-prong outlet.

Do not use an extension cord.

Ensure there is power to outlet.

Check electrical source or call an electrician to check if voltage is low.

Reset a tripped circuit breaker. Replace any blown fuses.

NOTE: if problems continue, contact an electrician.

Normal washer operation. Door must be completely closed and latched for washer to run.

Washer will pause during certain phases of cycle. Do not interrupt cycle.

The washer pauses for about 2 minutes during certain cycles. Allow the

cycle to continue. Some cycles feature periods of tumbling and soak.

Washer may be stopped to reduce suds.

Cold Wash uses less water in the beginning of the cycle to provide a

high concentration of detergent for optimal cleaning action. Following this

concentrated tumbling, more water is used to complete the wash.

Steam Models only: During the first 20 minutes of the Clean Washer

with affresh 'Rjcycle, it will activate the steamer but the drum will not spin

or fill with water. You may see condensation on the door glass during this

initial phase, if you are using an affresh '-_Washer Cleaner tablet, it will not

dissolve completely during the steam phase. This is normal.

The washer door is not firmly shut. The door must be closed during operation.

Washer not loaded as Remove several items, rearrange load evenly in washer drum. Close door

recommended, and touch and hold START.

Do not add more than 1 or 2 additional items after cycle has started to

avoid tightly packing or unbalancing.

Do not add more water to the washer.

TROUBLESHOOTING

Washer won't run or fill,

washer stops working

(cont.)

First try the solutions suggested here or visit our website at www.maytag.com/product_help -

In Canada www.maytag.ca for assistance and to possibly avoid a service call.

if you experience Possible Causes l Solution

Not using HE detergent or using too Only use HE detergent. Suds from regular detergents can

much HE detergent, slow or stop the washer. Always measure detergent, following

Door not opened between cycles.

Washer not draining/ Drain hose extends into standpipe farther

spinning, loads are than 4.5" (114 mm).

still wet

The drain hose is clogged, or the end

of the drain hose more than 96" (2.4 m)

above the floor.

The drain hose fits too tightly in the

standpipe, or is it taped to the standpipe.

Using cycles with a lower spin speed.

Washer not loaded as recommended.

The load may be out of balance.

Not using HE detergent or using too

much HE detergent.

Small items may have been caught in the

pump or stuck between the washer drum

and the outer tub.

There are too many clothes in the Wash

& Dry cycle.

Door locked at end of wash Water remaining in washer after cycle.

cycle.

Fresh Hold-_/Fresh Spin TM option is on.

Door will not unlock Door locks when cycle has started.

Check for proper water supply.Incorrect or wrong wash or

rinse temperatures

Washing many loads.

manufacturer's directions based on your load requirements.

To remove suds, cancel cycle. Select DRAIN & SPIN with Extra

Rinse. Touch and hold START. Do not add more detergent.

After 3 wash cycles in a row are completed, the door must be

opened and then closed before a new cycle can begin.

Check drain hose for proper installation. Use drain hose form

and securely attach to drainpipe or tub. Do not tape over drain

opening.

Lower drain hose if the end is higher than 96" (2.4 m) above

the floor. Remove any clogs from drain hose. See "Installation

Requirements" in Installation Instructions.

The drain hose should be loose yet fit securely. Do not seal the

drain hose with tape. The hose needs an air gap. See "Secure

the Drain Hose" in Installation Instructions.

Cycles with lower spin speeds remove less water than cycles

with high spin speeds. Use the recommended cycle/speed spin

for your garment.

A tightly packed or unbalanced load may not allow the washer

to spin correctly, leaving the load wetter than normal. See "Cycle

Guide" for load size recommendation for each cycle.

Avoid washing single items. Balance a single item such as a rug

or jeans jacket with a few extra items.

Use only HE detergent. Suds from regular detergent or using

too much detergent can slow or stop draining or spinning.

Always measure and follow manufacturer's directions for your

load. To remove extra suds, select DRAIN & SPIN with Extra

Rinse. Do not add detergent.

Check the drum for any items sticking through the drum holes.

Empty pockets and use garment bags when washing small items.

Only use the Overnight Wash & Dry cycle for 2-4 lightly soiled

synthetic garments, athletic uniforms, or workout wear.

Select DRAIN & SPIN to remove any water remaining in the

washer. The washer door will unlock at the end of the drain.

While this option is on, the fan blows (Fresh Hold -_option only)

and the load is tumbled periodically for up to 12 hours (Fresh

Hold -_option) or 6 hours (Fresh Spin TM option). The door remains

locked during this time. To unlock the door, cancel the option by

touching POWER/CANCEL

If the "Add a Garment" light is lit, touch START once. The door

will unlock.

Make sure hot and cold inlet hoses are not reversed.

Both hoses must be attached to both washer and faucet, and

have both hot and cold water flowing to inlet valve.

Check that inlet valve screens are not clogged.

Remove any kinks in hoses.

Your hot water tank may not have enough hot water to keep up

with the number of hot or warm washes. This is normal.

TROUBLESHOOTING

First try the solutions suggested here or visit our website at www.maytag.com/product_help -

in Canada www.maytag.ca for assistance and to possibly avoid a service call.

if you experience l Possible Causes _ Solution

Desired setting or

option does not light

Load not rinsed

For best performance, not all settings

are available with each cycle, and some

options cannot be used together.

Load is wrinkled, twisted,

or tangled

Check for proper water supply.

Not using HE detergent or using too

much HE detergent.

Washer not loaded as recommended.

The load may be out of balance.

Washer not loaded as recommended.

Wash action too long for load.

Spin speed too high for load.

The washer is not unloaded promptly.

Not choosing the right cycle for the load

being washed.

The wash water was not warm enough

to relax wrinkles.

Washer not loaded as recommended.

Not using HE detergent or using too

much HE detergent.

Hard water or high level of iron (rust) in

water.

Fabric softener dispensing ball used.

Powdered detergent used for

low-speed cycle.

Not cleaning or removing

stains

See the "Cycle Guide" for the available settings and options for

each cycle.

Make sure hot and cold inlet hoses are not reversed.

Both hoses must be attached and have water flowing to the inlet

valve.

Both hot and cold water faucets must be on.

Inlet valve screens on washer may be clogged.

Remove any kinks in the inlet hose.

The suds from regular detergent can cause the washer

to operate incorrectly.

Use only HE detergent. Always measure detergent and follow

manufacturer's directions based on load size and soil level.

Avoid tightly packing the washer. The washer will not rinse well

if tightly packed. Load with dry items only. See the "Cycle Guide"

for load size recommendations for each cycle.

Use cycle designed for the fabrics being washed.

Add only 1 or 2 garments after washer has started.

When load unbalance occurs, a washing process will start to

redistribute the load. This may lengthen the cycle time. Avoid

washing single items. Balance a single item such as a rug or

jeans jacket with a few extra items.

Add load loosely. Items need to move freely reduce wrinkling and

tangling. See the "Cycle Guide" for load size recommendations

for each cycle.

Reduce tangling by mixing types of load items. Use the

recommended cycle for the type of garments being washed.

Select a lower soil level. Note that items will not be cleaned as

deeply as when using a higher soil level.

Select a lower spin speed. Note that items will be wetter than

when using a higher speed spin.

Unload the washer as soon as it stops or use Fresh Hold'RJ/Fresh

Spin TM option if you will not be able to unload the washer at the

end of the cycle.

Use the Delicates cycle or another cycle with a low spin speed

to reduce wrinkling.

If safe for load, use warm or hot wash water.

Add load loosely. Items need to move freely for best cleaning.

See the "Cycle Guide" for load size recommendations for each

cycle.

Add only 1 or 2 garments after washer has started.

Use only HE detergent. Always measure detergent and follow

manufacturer's directions based on load size and soil level.

You may need to install a water softener and/or iron filter.

Dispensing balls will not operate correctly with this washer.

Add liquid fabric softener to the fabric softener compartment.

Consider using liquid detergent.

La page charge ...

Maytag MHW4100DW0 Le manuel du propriétaire

Marque: Maytag

Modèle: MHW4100DW0

Catégorie: Machines à laver

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Maytag MHW4100DW0 Owner's manual

Documents connexes

Autres documents

Chore-Time MF2500A Poultry Winch Wall Control Mode d'emploi