Samsung UN55HU9000F Guide de démarrage rapide

user manual

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model _____________Serial No. ______________

If you have any questions, please call us at 1-800-SAMSUNG (1-800-726-7864) for assistance.

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Comment contacter Samsung dans le monde

Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs

Samsung.

Country Customer Care

Center

Web Site Address

CANADA 1-800-SAMSUNG

(726-7864)

www.samsung.com/ca/support (English)

www.samsung.com/ca_fr/support (French)

Samsung Electronics Canada Inc. 2050 Derry

Road West, Mississauga, Ontario L5N 0B9

Canada

U.S.A 1-800-SAMSUNG

(726-7864)

www.samsung.com/us/support Samsung Electronics America, Inc. 85

Challenger Road Ridgefield Park, NJ 07660

BN68-05946K-02

[HU9000-ZC]BN68-05946K-02L02.indb 1 2014-11-14 오전 9:10:14

English - 2

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this

apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.

− Do not place this apparatus in a conﬁned space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.

− Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.

− Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a ﬁre or electric shock.

• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or

near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.

• This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries

properly. Please contact your local authorities for disposal or recycling information.

• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in ﬁre or electric shock.

• Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay

particular attention to cords at the plug end, at wall outlets, and the point where they exit from the appliance.

• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the

local electrical supply.

• Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.

• To avoid electric shock, never touch the inside of this apparatus. Only a qualiﬁed technician should open this apparatus.

• Make sure to plug the power cord in until it is ﬁrmly seated. When unplugging the power cord from a wall outlet, always pull on the power

cord's plug. Never unplug by pulling on the power cord. Do not touch the power cord with wet hands.

• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately

and contact an authorized dealer or service center.

• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time

(especially when children, elderly or disabled people will be left alone in the house).

− Accumulated dust can cause an electric shock, an electric leakage or a ﬁre by causing the power cord to generate sparks and heat or

the insulation to deteriorate.

• Be sure to contact an authorized service center for information if you intend to install your TV in a location with heavy dust, high or low

temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an airport, a train station, etc. Failing to

do so may lead to serious damage to your TV.

• Use only a properly grounded plug and wall outlet.

− An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

• To turn this apparatus off completely, you must disconnect it from the wall outlet. Consequently, the wall outlet and power plug must be

readily accessible at all times.

• Do not allow children to hang onto the product.

• Store the accessories (battery, etc.) in a location safely out of the reach of children.

• Do not install the product in an unstable location such as a shaky self, a slanted ﬂoor, or a location exposed to vibration.

• Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a service center.

• To clean this apparatus, unplug the power cord from the wall outlet and wipe the product using a soft, dry cloth. Do not use any chemicals

such as wax, benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergent. These chemicals can damage the appearance

of the TV or erase the printing on the product.

• Do not expose this apparatus to dripping or splashing.

• Do not dispose of batteries in a ﬁre.

• Do not short-circuit, disassemble, or overheat the batteries.

• There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace

only with the same or equivalent type.

• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH OPEN FLAMES AWAY

FROM THIS PRODUCT AT ALL TIMES.

• Use care when touching the TV after it has been on for some time. Some parts can be warm to the touch.

This symbol indicates that high voltage is

present inside. It is dangerous to make any

kind of contact with any internal part of this

product.

This symbol indicates that important literature

concerning operation and maintenance has

been included with this product.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). THERE ARE

NO USER SERVICEABLE PARTS INSIDE. REFER ALL

SERVICING TO QUALIFIED PERSONNEL.

RISK OF ELECTRIC SHOCK DO NOT OPEN

Warning! Important Safety Instructions

(Please read the Safety Instructions before using your TV.)

[HU9000-ZC]BN68-05946K-02L02.indb 2 2014-11-14 오전 9:10:14

English - 3

Internet Security

Samsung takes a number of steps to protect its Internet-compatible Smart TVs against unauthorized incursions

and hacking. For example, certain sensitive communications between the TV and the Internet servers are

encrypted. In addition, the TV’s operating system has adopted controls to prevent the installation of unauthorized

applications.

Although we take steps to protect your SmartTV and information, no Internet-connected device or transmission

is completely secure. We therefore encourage you to take additional steps to safeguard your TV, secure your

Internet connection, and minimize the risk of unauthorized access. These steps are listed below:

•

When Samsung releases software updates to improve the security on your TV, you should promptly install

these updates. To automatically receive these updates, turn on “

Auto Update

” in the TV’s menu (

Support

>

Software Update

>

Auto Update

). When an update is available, a popup message appears on the TV

screen. Accept the software download and update by selecting YES when prompted. Take steps to secure

your wireless router and network. Your router’s manual should provide additional details about how to

implement the following measures:

• Secure your wireless router’s management settings with a unique password to prevent unauthorized

changes to security related settings.

• Implement standard encryption (e.g., WPA2 encryption) on your wireless router to secure your wireless

network signal.

• Secure access to your wireless network with a hard-to-guess password.

• Confirm your router’s firewall setting is enabled (if so equipped).

• Make sure all your Internet connected devices are behind your network’s firewall.

• If your router or modem has a standby mode button, use it to disconnect your home network from the

Internet when it is not in use.

•

Use strong passwords for all your Internet accounts (Netflix, Facebook, Skype, etc.). If your TV has a

camera, recess the camera into the TV’s bezel when it is not in use. Recessing the camera makes it

inoperative.

•

If any unexpected messages appear on your TV screen requesting permission to link a device or enable a

remote session, do NOT accept.

•

Do not visit suspicious web sites and do not install any suspicious programs. We recommend users install

only those authorized apps provided by Samsung through Samsung Smart Hub.

[HU9000-ZC]BN68-05946K-02L02.indb 3 2014-11-14 오전 9:10:14

English - 4

Figures and illustrations in this User Manual are provided for reference only and may differ from the actual

product appearance. Product design and specifications may change without notice.

Features of your new TV

3D

This new feature lets you view 3D content.

SMART HUB

Your TV features Smart Hub, a multi-purpose entertainment and family center. With Smart Hub, you can surf

the web, download applications, and stay in touch with family and friends through social networking services. In

addition, you can view or play photo, video, and music files stored on external storage devices.

Press the

button to open the

First Screen

, and select the Panel icon. You will move to the Panel screen.

Choose a service using the icons displayed in the top part of the screen.

Smart Hub services and functionality include:

Games: You can view all game apps provided by Smart Hub and download and play games you select.

SAMSUNG APPS: Samsung Apps offers an extensive collection of free and for-pay news, sports, weather,

and gaming content you can download directly to and enjoy on your TV.

On TV: View a listing of programs that are currently airing or are scheduled to air. Select a program to watch.

MOVIES & TV SHOWS: Purchase and stream movies and series directly from the Internet.

MULTIMEDIA: Play back photo, video, and music files from an external storage device.

Anynet+ (HDMI-CEC)

Lets you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote.

e-Manual

Provides a detailed, on-screen user's manual built into your TV (page 25).

SMART Interaction

Access and control menu options and functions using motions.

Device Manager

Use the TV features with a USB or Bluetooth keyboard and mouse.

MHL & Screen Mirroring

Displays mobile device screens on the TV using a wired or wireless connection.

[HU9000-ZC]BN68-05946K-02L02.indb 4 2014-11-14 오전 9:10:14

English - 5

Contents

01. What's in the Box?

02. The TV Controller

03. The One Connect

8 Connecting the TV to the One

Connect

9 Upgrading the TV using a UHD

Evolution Kit (sold separately)

11 Arrange the cables using the Cable

Holder

11 Matching Cable Plugs to Cable Ports

04. The Built-in Camera

05. Using the Samsung Smart

Control

13 Buttons and Functions

18 Installing Smart View 2.0 a Near Field

Communications (NFC) Device

19 Switching Between Video Sources

19 Using the Remote Control to Control

External Devices

19 Connecting the IR Extender Cable

20 Setting Up the Universal Remote

Control

06. Smart Hub

07. Using the e-Manual

25 Launching the e-Manual

25 Additional e-Manual Features

26 Updating the e-Manual to the Latest

Version

08. Troubleshooting and

Maintenance

27 Troubleshooting

29 Network Troubleshooting

32 Eco Sensor and Screen Brightness

33 Getting Remote Support

33 Caring for the TV

09. Specifications, wall

mounting, and other

information

34 Specifications

35 Licenses

36 Mounting the TV on a Wall Using the

Wall Mount Kit (Optional)

37 Providing Proper Ventilation for Your

TV

38 Securing the TV to the Wall

39 Warranty Information

[HU9000-ZC]BN68-05946K-02L02.indb 5 2014-11-14 오전 9:10:14

English - 6

01. What's in the Box?

Samsung Smart Control & Batteries (AA x 2)

User Manual

Power Cord

Warranty Card / Regulatory Guide

Samsung 3D Active Glasses

One connect One connect cable Wall Mount Adapter

(55 inches models: 2 pieces)

Wall Mount Adapter

(55 inches models: 2 pieces

65 inches models: 4 pieces)

IR Extender Cable AUDIO OUT COMPONENT

IN AV IN 1 Adapter

RCA Adapter

–

Please make sure the following items are included with your TV. If any items are missing, contact your

dealer.

–

The items’ colors and shapes may vary depending on the models.

–

Cables not included can be purchased separately.

–

Check for any accessories hidden behind or in the packing materials when opening the box.

Warning: Screens can be damaged from direct pressure when

handled incorrectly. We recommend lifting the TV at the edges, as

shown.

Don't Touch

This Screen!

[HU9000-ZC]BN68-05946K-02L02.indb 6 2014-11-14 오전 9:10:16

English - 7

02. The TV Controller

You can turn on the TV using the Samsung Smart Control or the TV’s Controller, a small joystick-like button on

the back of the TV in its lower-left corner. You can also use the TV’s Controller to operate the TV without the

Samsung Smart Control.

mR

P

Open Smart Hub.

Turn off the TV.

Select a source.

Open the menu.

TV Controller

The control stick is located on the

lower-left corner of the back of the TV.

Remote control sensor

When you use the Samsung Smart Control, the standby

LED does not light, except when you press the

P

button.

Press the Controller in to turn the TV on. When the TV is on, press the controller left or right to open the TV’s

menu or open the source list. Press the Controller up to open Smart Hub. Press the controller in to make a

selection. Press the Controller down to turn off the TV.

[HU9000-ZC]BN68-05946K-02L02.indb 7 2014-11-14 오전 9:10:16

English - 8

03. The One Connect

The One Connect serves as the connection panel for your TV. You connect nearly all external devices to the One

Connect.

Connecting the TV to the One Connect

You must connect the TV to the One Connect via the One Connect cable before connecting any external

devices. The One Connect cable has two different ends. Connect the end marked TV to the TV and the other

end to the One Connect.

- The TV stand type

depends on the model.

<TV-end Connector><One Connect-end Connector>

TV

One Connect

The connectors at each end of the One Connect cable differ from each other in shape. When

connecting the One Connect cable to the TV, make sure that the right connector is plugged into

the TV. Otherwise, it may cause product a failure.

[HU9000-ZC]BN68-05946K-02L02.indb 8 2014-11-14 오전 9:10:16

English - 9

Upgrading the TV using a UHD Evolution Kit

(sold separately)

No need to buy a new TV. You can upgrade your TV to the latest features and functions by replacing your older

One Connect with a UHD Evolution Kit from the latest year (sold separately). Experience the latest features and

services offered by Samsung Electronics via UHD Evolution Kit.

TV

UHD Evolution Kit

(sold separately)

UHD Evolution Kit is sold separately. Purchasing a UHD Evolution Kit allows you to upgrade the UHD Evolution

Kit's software to the version from the year in which your UHD Evolution Kit was released. Not supported on all

models.

[HU9000-ZC]BN68-05946K-02L02.indb 9 2014-11-14 오전 9:10:17

English - 10

One Connect - Front

[HU9000-ZC]BN68-05946K-02L02.indb 10 2014-11-14 오전 9:10:18

English - 11

Arrange the cables using the Cable Holder

Matching Cable Plugs to Cable Ports

Make sure you have the correct cable before plugging it in. Illustrations of common plugs and ports are shown

below.

Cable Plugs Ports

HDMI

USB

Optical

Warning

Do not plug cables in upside down.

Be sure to check the orientation of the

plug before plugging it in.

04. The Built-in Camera

This TV features a built-in TV camera that you can use for the

Motion Control

, and

Face Recognition

features. You

can also use the adjustment part of the camera's angle to change the camera's viewing angle.

From the Top From Behind

Lens

The adjustment part of the camera's angle

[HU9000-ZC]BN68-05946K-02L02.indb 11 2014-11-14 오전 9:10:19

English - 12

Do not touch the lens while operating the TV camera.

You can leave fingerprints that may affect the image quality.

If the lens gets dirty, clean it using a soft piece of cloth.

Extending the TV Camera

To use the TV camera, you must first extend it.

Gently push the camera in without touching the lens until you hear a click. The camera pops up.

Retracting the Camera

If you are not using the TV camera, keep it retracted inside the TV. The Motion Control and Face Recognition

features cannot be used while the TV camera is in the retracted state.

Gently push the camera in without touching the lens until you hear a click.

Adjusting the camera angle

The initial shape of the camera

To adjust the camera angle

downwards

To adjust the camera to the front

The adjustment part of the

camera's angle

Simultaneously press the TV

camera and adjust the angle.

Put your finger on the adjustment

part of the camera's angle and

adjust the angle upwards, pulling it

in the direction of the arrow.

[HU9000-ZC]BN68-05946K-02L02.indb 12 2014-11-14 오전 9:10:21

English - 13

05. Using the Samsung Smart

Control

Buttons and Functions

RETURN

EXIT

GUIDE

CH.LIST

SMART HUB

KEYPAD

SOURCE

VOL

CH

VOICE

3D CC P. SIZEMTS

MENU

M.SCREEN

SEARCH

MIC

TV

MUTE

: Cuts off the

sound temporarily.

RETURN

EXIT

GUIDE

CH.LIST

SMART HUB

KEYPAD

SOURCE

VOL

CH

VOICE

3D CC P. SIZEMTS

MENU

M.SCREEN

SEARCH

MIC

TV

Microphone: Use the microphone with the

Voice Control

and Voice functions.

- The

Voice Control

function can be affected by unclear

pronunciation, voice level, or surrounding noise.

Turns the TV on and off.

SEARCH: Launches the Search function.

KEYPAD: Displays the On-Screen Remote. See the

e-Manual chapter, Using the Remote Control and

Peripherals > Using the Samsung Smart Control >

Displaying and Using the On-Screen Remote.

SOURCE: Displays and lets you select video sources.

VOICE

: Takes your voice commands and lets you enter

text using your voice.

Changes channels.

Adjusts the volume.

Touch pad

Place a finger on the touch pad and move the Samsung

Smart Control. The pointer on the screen moves in the

direction you moved the Samsung Smart Control.

Press the touch pad to run the focused item.

Press and hold the touch pad to display the Context-

Sensitive Menus.

<

>

¡

£

: Moves the cursor, selects the on-screen

menu items, and changes the values seen on the TV's

menu.

RETURN: Returns to the previous menu.

SMART HUB: Brings up

Smart Hub

applications. See the

e-Manual chapter, Smart Features >

Smart Hub

.

- To exit an application quickly, press the

button.

GUIDE: Displays the EPG (Electronic Program Guide).

Use these buttons with a specific feature and according

to the directions on the TV's screen.

3D: Turns the 3D function on or off. See the e-Manual chapter, Picture and Sound Settings > Viewing in 3D.

MTS: Press to choose stereo, mono, or Separate Audio Program (SAP broadcast).

CC: Controls the caption decoder and displays captions on the screen.

P.SIZE: Lets you choose the picture size.

MENU: Displays the menu on the screen.

M.SCREEN: You can split the TV screen and enjoy multiple activities - such as watching

TV, surfing the web, and watching a video - all at the same time.

[HU9000-ZC]BN68-05946K-02L02.indb 13 2014-11-14 오전 9:10:22

English - 14

Installing Batteries into the Samsung Smart Control

To use the Samsung Smart Control, insert the batteries into the device referring to the figure below.

1. Gently pull on the battery cover's notch, and then remove the cover completely once it comes loose.

2. Insert 2 AA alkaline batteries, making sure to align the positive and negative polarities correctly.

3. Place the battery cover on the remote control and insert the top part of the cover into the remote control.

4. Press the catches on both sides of the battery cover in the order shown by the figure so that the cover is

completely attached to the remote control.

Using the Samsung Smart Control Motion Function to

Operate the TV

The Samsung Smart Control has a motion sensor (gyro sensor) that lets you control the TV easily by moving the

Samsung Smart Control and using it much like a cordless mouse.

Place a finger on the Samsung Smart Control's touch pad, and then move the Samsung Smart Control. A

pointer appears on the screen. Move the Samsung Smart Control, and the pointer moves on the screen in the

direction you moved the Samsung Smart Control and the same distance. Highlight an item on the screen with

the pointer, and then press the touch pad to select it.

You can also move the Samsung Smart Control in the same fashion to scroll scrollable screens up and down.

- If you remove your finger from the touch pad, even momentarily, the Motion Function stops. To re-start the

function, put your finger on the touch pad again, and then move the Samsung Smart Control.

- If

Voice Guide

is set to

On

, the Samsung Smart Control's motion sensor does not work. For the motion

sensor in the Samsung Smart Control to work, you must set

Voice Guide

to

Off

.

[HU9000-ZC]BN68-05946K-02L02.indb 14 2014-11-14 오전 9:10:22

English - 15

Using the Touch Pad and the Directional Buttons

- In the TV's menu, navigate to

Support

>

Smart Control Tutorial

to view a tutorial that shows how to use the

touch pad.

- If the touch pad's sensitivity is too high or low, navigate to the

System

>

Smart Control Settings

menu, and

then select the

Touch Sensitivity

option to change the touch pad sensitivity.

Moving the Focus or Pointer Entering the Menu / Selecting

an Item

Press the directional buttons (up, down, left, and

right) to move the focus, pointer, or cursor in the

direction you want.

To enter a menu or select an item, highlight the

item or the menu title, or move the pointer over it,

and then press the touch pad.

Displaying Context-sensitive

Menus in Smart Hub

Changing the Smart Hub

Panel

In Smart Hub, highlight an item, and then press

and hold the touch pad. The context-sensitive

menu for the item pops up.

- The context-sensitive menu may vary

depending on the item you selected.

On a Smart Hub panel, drag left or right on the

touch pad. The previous or next Smart Hub panel

appears.

Scrolling on the Web Browser Loading the CH List

When you are using the web browser, drag up /

down or left / right on the touch pad to scroll the

web screen.

Press and hold the touch pad while watching TV.

To launch the

CH List

.

[HU9000-ZC]BN68-05946K-02L02.indb 15 2014-11-14 오전 9:10:23

English - 16

Reconnecting the Samsung Smart Control to the TV

If the Samsung Smart Control stops operating or works abnormally, try replacing the batteries. If the problem

persists, pair the Samsung Smart Control and TV again.

1. Move to within a foot of the TV, and then aim the Samsung Smart Control at the TV's remote control sensor.

Remote Control Sensor

2. Press the

RETURN

button and

GUIDE

button simultaneously for 3 seconds or more.

3. The connecting icon appears on the screen. A few moments later, the connected icon appears. The

Samsung Smart Control is paired to the TV.

The Low Battery Alarm Window

If the Samsung Smart Control's batteries become low, the Low Battery Alarm appears on the screen. When the

Alarm appears, replace the batteries. We recommend using alkaline batteries for longer operating life.

[HU9000-ZC]BN68-05946K-02L02.indb 16 2014-11-14 오전 9:10:23

English - 17

Displaying and Using the On-Screen Remote

Press the

KEYPAD

button on the Samsung Smart Control to display the On-Screen Remote on the TV's screen.

Use the On-Screen Remote to enter numbers, control content playback, and use the features and functions of

the TV, just like a real remote. Use the directional buttons on the Samsung Smart Control to move the cursor on

the On-Screen Remote. Press the touch pad on the Samsung Smart Control to select.

- The On-Screen Remote buttons may vary depending on the TV features or functions you are using.

Button Description

Lets you switch channels by entering channel numbers directly. Select

Pre-CH

to

return to the previous channel.

Controls the playback of video, photo, or music files from all sources, and the

playback of media content on external devices (for example, a Blu-ray player).

a

,

b

,

{

,

}

Use these colored buttons to access additional options specific to the feature in use.

TOOLS

Press to display the Tools menu while you are watching TV. The Tools menu gives

you easy access to frequently used functions. The functions listed are context-

sensitive and vary depending on how you are currently using the TV.

INFO

Shows information about the current digital broadcast program or content.

MENU

Displays the TV's menu on the screen.

Speaker Settings

Lets you select the speakers which will play the TV's audio. You must connect a

home theater or amplifier with external speakers to the TV to use this function.

PIP

Lets you display video from an external device or computer on the main screen and

a TV broadcast in a picture-in-picture window.

Multi-Link Screen

Lets you split the TV screen and use multiple functions - such as watching TV,

surfing the web, and playing a video - at the same time.

CC

Select to turn subtitles on or off.

P.Size

Changes the picture size.

SLEEP

This function automatically shuts off the TV after a preset period of time.

P.Mode

Lets you select the Picture Mode.

Web Browser

Launches the Web Browser.

e-Manual

Opens the e-manual.

Sign In

Select to log in to or out of your Samsung account.

Move to the right

/

Move to the left

: Moves the Onscreen Remote on the screen.

Large size

/

Normal size

: Resizes the Onscreen Remote on the screen.

- Alternatively, navigate to the

System

>

Smart Control Settings

menu and select

and set the

Onscreen Remote Size

option.

Motion Sensitivity

: Put a finger on the touch pad and move it to adjust the speed of

the pointer on the screen.

- Navigate to

System

>

Smart Control Settings

, and select

Motion Sensitivity

to

enable this option.

Touch Sensitivity

: Lets you change the touch pad sensitivity.

- Alternatively, navigate to the

System

>

Smart Control Settings

menu and select

and set the

Touch Sensitivity

option.

Universal Remote Setup

: Displays the Universal Remote Setup screen.

Cancel

: Select to close a pop up menu.

[HU9000-ZC]BN68-05946K-02L02.indb 17 2014-11-14 오전 9:10:23

English - 18

Installing Smart View 2.0 a Near Field

Communications (NFC) Device

Smart View 2.0 is a cross-platform multi-screen app that enables you to load the TV screen on an NFC

compatible device, share multimedia contents between two devices, and control the TV remotely.

To install Smart View 2.0, follow these easy steps:

1. Activate NFC on the mobile device.

- For more information, refer to the device's manual.

2. Put the mobile device near the NFC logo on the battery cover of the Samsung Smart Control.

- Make sure that the mobile device's display stays active during the process. If the display turns off, NFC

communications will be disconnected.

3. Smart View 2.0 automatically installs and then launches on the mobile device.

- If your mobile device did not install Smart View 2.0, visit Google Play and install the app.

Important Information

•

NFC comes only with Android v4.12 Jellybean or later.

- NFC is enabled only on Android 4.12 Jellybean or higher mobile devices. The NFC tag is also required.

For more information, refer to the mobile device's manual.

- To enable NFC on mobile devices using operating systems earlier than Android 4.12 Jellybean,

download the Samsung NFC Connection app from Google Play and install it on the device. The NFC

tag is also required.

•

The connection may fail if the mobile device is not properly aligned with the NFC logo. If the "Empty tag"

error appears on the mobile device, try again. Bring the mobile device close to the Samsung Smart Control

and position it so that its NFC antenna faces the NFC logo on the Samsung Smart Control. Samsung Smart

Control so that the NFC antenna faces the NFC logo.

•

The NFC antenna's position depends on the device model. Locate the NFC antenna before proceeding.

•

A thick cellular-phone case may interrupt the connection between the two devices.

•

The Certification Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and

in other countries.

[HU9000-ZC]BN68-05946K-02L02.indb 18 2014-11-14 오전 9:10:24

English - 19

Switching Between Video Sources

Press the

SOURCE

button to switch between external devices connected to the TV. For example, to switch to a

game console connected to the second HDMI connector, press the

SOURCE

button. The Source List appears

across the top of the screen. From the

Source

list, select

HDMI2

.

- The connector names may vary depending on the product.

Using the Remote Control to Control

External Devices

MENU >

System

>

Universal Remote Setup

The universal remote control feature lets you control cable boxes, Blu-ray players, home theaters, and other

third-party external devices connected to the TV using the TV's remote control. For each external device you

want to control, you must run the universal remote set up process. The first step in the process is connecting the

IR extender cable (included) to the TV and positioning the transmitter end of the cable in front of the device you

want to control.

- You can also use the Anynet+ (HDMI-CEC) function to operate external Samsung devices with your TV's

remote control without any additional setup.

Connecting the IR Extender Cable

- The color and design of the IR extender cable may vary depending on the model.

4 inches

To begin the universal remote set up process, connect the IR extender cable (included) to the TV's IR output

connector as shown in the diagram, and then position the transmitter end within 4 inches (10 cm) of the external

device's remote control sensor, pointing in the direction of the sensor.

There can be no obstacles between the transmitter end of the IR extender cable and the external device.

Any obstacles will interfere with the transmission of the remote control signals.

[HU9000-ZC]BN68-05946K-02L02.indb 19 2014-11-14 오전 9:10:24

English - 20

Setting Up the Universal Remote Control

- If you want to control a set-top-box, you need to have your zip code and your cable provider's name and

location on hand before you begin. If you want to control a Blu-ray player or home theater, you need the

manufacturer's name and model number.

1. Turn on the external device you want to control with the universal remote function.

2. Press the

SOURCE

button on your remote to bring up the

Source

screen.

3. Select the

Universal Remote Setup

icon.

- You can also start Universal Remote Setup through the TV's menu. Navigate to

System

>

Universal

Remote Setup

.

4. The TV checks if the IR extender cable is connected. If it confirms the connection, press the touch pad.

5. Select the type of device you want to control - set-top-box, Blu-ray player, or home theater.

6. Follow the directions on the screen to complete the set up and register the device. The directions will be

different, depending on the device you want to control.

7. Once set up is complete and you have confirmed that you can use the TV remote to control the device,

disconnect the IR extender cable from the TV and set it aside. You can now control the device directly with

your remote.

Controlling an External Device with the TV Remote

During the universal remote set up process, the TV registers the connector (source) the external device is

connected to. To control a registered external device with your TV's remote, select the external device on the

Source List.

1. Press the

SOURCE

button on your remote.

2. Select the source the device is connected to (HDMI1, HDMI2, etc.)

3. Control the device with the remote. For example, if the device is a set-top-box, press the channel buttons on

the remote to change the channel.

For information on additional functions, see "Controlling External Devices with the TV Remote - Using the

Universal Remote" in the e-Manual.

[HU9000-ZC]BN68-05946K-02L02.indb 20 2014-11-14 오전 9:10:24

La page charge ...

Samsung UN55HU9000F Guide de démarrage rapide

Ce manuel convient également à

Samsung UN55HU9000F Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents