Philips MCD177/12 Guide de démarrage rapide

Catégorie
Lecteurs DVD
Taper
Guide de démarrage rapide
MCD177
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
1
Quick Start Guide
Quick Start GuideAV cables (Y/W/R)
Remote control with
battery
Power adaptor FM antenna
2
User Manual
User Manual
Remove the plastic
protective sheet
MCD177_QSG_Eng 10/16/08, 16:221
speaker
(right)
speaker
(left)
FM wire antenna
Power adaptor
Tip
See the User Manual for other TV
connection options.
Setting up the TV
1
2
3
1
2
Press SOURCE (DISC on the remote control) to select disc source.
Turn on the TV and set it to the correct Video In channel.
A To hear the sound of this DVD Player
through your TV, use the audio cables (white/
red, supplied) to connect LINE OUT (L/R)
jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV.
B To listen to TV through this system, use a
cinch cable (not supplied) to connect AUX
IN jack (3.5mm) to the corresponding
AUDIO OUT jacks on the TV set.
A
Connect the speaker cables.
Connect the FM antenna.
Connect the composite video cable (yellow, supplied) to a TV.
Connect the power cords of the system and TV.
4
MCD177_QSG_Eng 10/16/08, 16:222
Setting the clock
1
2
3
4
Setting system menu options
Tip
See chapters "Preparations" and "System Menu Options" in the User
Manual for detailed descriptions.
– – Audio Setup Page – –
NIGHT MODE
DIGITAL Output
Dolby Digital Setup
5
Press DISPLAY/CLOCK agian to store the setting.
In standby mode, press and hold DISPLAY/CLOCK. The clock digits flash on
the display panel.
Press TUNING à / á (or à / á on the remote control) to set the
hours.
Press í/
ë to set the minutes.
Press PROG to select between 12 hour and 24 hour display.
– – Preference Page – –
Audio
Subtile
Disc Menu
Parental
Password
Divx Subtitle
Default
– – Video Setup Page – –
TV Display
Component
TV Type
MCD177_QSG_Eng 10/16/08, 16:233
Playing a disc
Programming and tuning to radio stations
1
2
3
Press SOURCE (FM on the remote control) to select tuner source.
Press PROG for more than two seconds to program all available stations in order of
waveband.
Press í/
ë until the desired preset station is displayed.
1
2
3
Press OPEN•CLOSE 0 to open the disc door and load in a disc, then press
the same button again to close the disc door.
Make sure the label side of the disc is facing up.
Playback will start automatically. If not pressÉÅ.
To stop playback, press 9.
1
2
3
Insert the USB device’s USB plug into the socket on the front panel of the main set.
Press SOURCE (or USB on the remote control) once or more to select USB.
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players
(USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
Play the USB’s audio files as you do with the albums/tracks on a CD.
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
PDCC-ZYL-0839
C Royal Philips Electronics N.V. 2008
All rights reserved.
http://www.philips.com
MCD177_QSG_Eng 10/16/08, 16:234
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Philips MCD177/12 Guide de démarrage rapide

Catégorie
Lecteurs DVD
Taper
Guide de démarrage rapide

dans d''autres langues