Dometic DM50NTE Mode d'emploi

DM50NTE

Drawer Minibar

Installation and Operating Manual. . . . . . . 10

Schubfach-Minibar

Montage- und Bedienungsanleitung . . . . .23

Minibar à tiroir

Instructions de montage

et de service . . . . . . . . . . . . . . . . . . . . . . . . .37

Cajón minibar

Instrucciones de montaje y de uso . . . . . . . 51

Minibar de gaveta

Instruções de montagem e manual de

instruções . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Cassetto del minibar

Istruzioni di montaggio e d’uso . . . . . . . . .79

Lade minibar

Montagehandleiding en

gebruiksaanwijzing . . . . . . . . . . . . . . . . . . .93

Skuffe minibar

Monterings- og betjeningsvejledning . . . 107

Låda till minibar

Monterings- och bruksanvisning . . . . . . . 121

Uttrekkbar minibar

Monterings- og bruksanvisning . . . . . . . . 134

Vetolaatikkominibaari

Asennus- ja käyttöohje . . . . . . . . . . . . . . . 148

Минибар с выдвижным ящиком

Инструкция по монтажу и эксплуатации 162

Minibary szufladowe

Instrukcja montażu i obsługi. . . . . . . . . . . 177

Minibar Drawer

Návod na montáž a uvedenie

do prevádzky. . . . . . . . . . . . . . . . . . . . . . . 191

Minibar Drawer

Návod k montáži a obsluze . . . . . . . . . . . 204

Fiókba szerelt minibár

Szerelési és használati útmutató . . . . . . . 217

EN

DE

FR

ES

PT

IT

NL

DA

SV

NO

FI

RU

PL

SK

CS

HU

REFRIGERATION

DRAWER MINIBAR

protected by copyright and design law. The underlying technical design and the

products contained herein may be protected by design, patent or be patent

pending. The trademarks mentioned in this manual belong to Dometic Sweden AB.

All rights are reserved.

DM50NTE

3

2

3

1

2

3

4

2

DM50NTE

4

2 431

3

4

3

2

1

4

DM50NTE

5

1

2

5

DM50NTE

6

AB

CD

≥ 400cm²

≥ 400 cm²

≥ 400cm²

≥ 400 cm²≥ 400 cm²

≥ 400 cm²

6

DM50NTE

7

180

473,5

83

68

504

532

418

121,5

93

7

495

75

550

8

9

1

2

DM50NTE

8

C

BA

1

2

1

3

2

0

68

1

2

AB

a

DM50NTE

9

2

3

1

C

B

D

A

1

b

1

2

3

4

c

EN

Explanation of symbols DM50NTE

10

Please read this manual carefully before starting the device. Keep it in a

safe place for future reference. If the device is passed on to another

person, this manual must be handed over to the user along with it.

The manufacturer cannot be held liable for damage resulting from improper usage

or incorrect operation.

Contents

1 Explanation of symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

2 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

3 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

4 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

5 Technical description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

6 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

7 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

8 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

9 Cleaning and maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

10 Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

11 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

12 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

1 Explanation of symbols

!

WARNING!

Safety instruction: Indicates a hazardous situation that, if not avoided,

could result in death or serious injury.

CAUTION!

Safety instruction: Indicates a hazardous situation that, if not avoided,

could result in minor or moderate injury.

EN

DM50NTE Safety instructions

11

A

I

2 Safety instructions

2.1 General safety

!

WARNING! Failure to obey these warnings could result in death

or serious injury.

Electrocution hazard

• Do not operate the cooling device if it is visibly damaged.

• If this cooling device's power cable is damaged, it must be replaced

by the manufacturer, customer service or a similarly qualified person in

order to prevent safety hazards.

• This cooling device may only be repaired by qualified personnel.

Improper repairs can lead to considerable hazards.

Health hazard

• This device can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack

of experience and knowledge if they have been given supervision or

instruction concerning use of the device in a safe way and understand

the hazards involved.

• Children shall not play with the device.

• Cleaning and user maintenance shall not be made by children without

supervision.

• Children aged from 3 to 8 years are allowed to load and unload

cooling devices.

Explosion hazard

• Do not store any explosive substances such as spray cans with a

flammable propellant in the cooling device.

NOTICE!

Indicates a situation that, if not avoided, can result in property damage.

NOTE

Supplementary information for operating the product.

EN

Safety instructions DM50NTE

12

!

CAUTION! Failure to obey these cautions could result in minor or

moderate injury.

Electrocution hazard

• Disconnect the cooling device from the power supply

– before each cleaning and maintenance

– after every use

Health hazard

• Food may only be stored in its original packaging or in suitable

containers.

A

NOTICE! Damage hazard

• Check that the voltage specification on the type plate corresponds to

that of the energy supply.

• Connect the cooling device with an AC connection cable to the

AC power supply.

• Never pull the plug out of the socket by the cable.

• The cooling device is not suitable for transporting caustic materials or

materials containing solvents.

2.2 Operating the cooling device safely

!

CAUTION! Failure to obey these cautions could result in minor or

moderate injury.

Health hazard

• Opening the cooling devicefor long periods can cause significant

increase of the temperature in the compartments of the device.

• Clean regularly surfaces that can come in contact with food and

accessible drainage systems.

• Store raw meat and fish in suitable containers in the device, so that it is

not in contact with or drip onto other food.

• If the device is left empty for long periods:

– Switch off the device.

– Defrost the device.

– Clean and dry the device.

– Leave the door open to prevent mould developing within the

device.

EN

DM50NTE Scope of delivery

13

A

NOTICE! Damage hazard

• Do not use electrical devices inside the cooling device unless they are

recommended by the manufacturer for the purpose.

• Do not place the cooling device near naked flames or other heat

sources (heaters, direct sunlight, gas ovens etc.).

• Danger of overheating!

Ensure at all times that there is sufficient ventilation so that the heat that

arises during operation does not build up. Make sure that the device

is sufficiently far away from walls and other objects so that the air can

circulate.

• Ensure that the ventilation openings are not covered.

• Do not fill the inner container with ice or fluids.

• Never immerse the cooling device in water.

• Protect the cooling device and cables against heat and moisture.

3Scope of delivery

The following main alternatives are obtainable:

• Minibar DM50NTE D with door panel, without lock

• Minibar DM50NTE D with door panel, with lock

• Minibar DM50NTE F without door panel, without lock

• Minibar DM50NTE F without door panel, with lock

Quantity Description

1 Minibar

1 Cable for 230 Vw connection

4 Screw ø4 x 45 mm (Installation)

4 Plug (Installation)

1 Handle DM50NTE D only

2 Plug (Handle installation) DM50NTE D only

1 Inlet filter

6 Screw ø3 x 12 mm(Filter installation)

2 Plug (Wooden panel) DM50NTE F wooden version

only

EN

Intended use DM50NTE

14

4 Intended use

The Minibars DM50NTE D and DM50NTE F are designed for use inside a piece of

furniture and are suitable for cooling beverages and food.

The device is designed for use with a 230 V AC mains supply.

The cooling device is intended to be used in household and similar applications

such as

• staff kitchen areas in shops, offices and other working environments

•farm houses

• clients in hotels, motels and other residential type environments

• bed and breakfast type environments

• catering and similar non-retail applications

5 Technical description

The minibar has a main drawer for bottles and cans as well as a mini drawer for

miniatures and snacks. The main drawer has room for 33 bottles with a maximum

height of 28 cm.

The minibar DM50NTE D comes with a anthracite panel and pull handle.

The minibar DM50NTE F is delivered without panel and is prepared for fitting the

hotel's own door decor.

A lock is optionally available.

1 Lock decor (Wooden panel) DM50NTE F wooden ver-

sion with lock only

2 Key Lock version only

1 Installation and Operating manual

CAUTION! Health hazard!

Please check if the cooling capacity of the device is suitable for storing

the food or medicine you wish to cool.

Quantity Description

EN

DM50NTE Technical description

15

5.1 Description of the device

Front panel

Rear side

Control panel (inside the device)

No in

fig. 1, page 3

Description

1 Lock (optional)

2 Handle (DM50NTE D only)

3 Door panel (DM50NTE D only)

No in

fig. 2, page 3

Description

1 Mains adaptor

2 12 Vg socket

3 Drip tray

4 Heat pipe

No in

fig. 3, page 4

Description

1 Lamp

2 Error LED

3 Power Status LED

4 Setting button

EN

Installation DM50NTE

16

Main drawer

Mini drawer

6 Installation

!

6.1 Notes on mounting into furniture

You can mount the minibar in four ways into furniture. Choose your favoured

alternative according to fig. 6, page 6.

Observe the following:

• The cut-out dimensions H x W x D are:

– DM50NTE D: 438 x 570 x 504 mm

– DM50NTE F: 438 x 570 x (502 + d) mm

d is the thickness of the hotel‘s own decor

• The clearance between the minibar‘s back and the furniture wall should be

approx. 15 mm.

• The ventilation openings for the chosen alternative have to be produced as

shown in fig. 6, page 6.

No in

fig. 4, page 4

Description

1 Wide divider

2 Separator

3 Small divider

4 Bottle finger

No in

fig. 5, page 5

Description

1 Rotatable divider

2 Miniature bottle holder

CAUTION! Health hazard

To avoid a hazard due to instability of the device, it must be fixed in

accordance with the instructions.

EN

DM50NTE Installation

17

• Air passing through the inlet air duct must not be heated by any heat sources

(heaters, direct sunlight, gas ovens etc.).

6.2 Pressing out the ventilation opening

fig. 8, page 7

➤ Produce a ventilation opening of 75 x 550 mm in the bottom of the furniture into

which you place the minibar.

Measure the distance of 504 mm from the minibar‘s door front excluding any

own decor.

6.3 Mounting the minibar into a piece of furniture

➤ Fasten the minibar with the four screws ø4 x 45 mm (fig. 9 1, page 7).

➤ Insert the four plugs (fig. 9 2, page 7) into the boring.

6.4 Connecting the minibar electrically

➤ Plug the 230 V connection cable into the AC voltage socket and connect it to the

230 V AC mains supply.

✓ The Power Status LED lights up.

✓ The lamp lights up and the minibar starts cooling the interior.

6.5 Mounting hotel's own door decor (DM50NTE F only)

The hotel's own door decor has to comply with the following requirements:

• Maximum weight: 2 kg

• Maximum thickness: 14 mm

➤ Fasten the decor with four screws.

No in

fig. 9, page 7

Description

1Screw ø4x45mm

2Plug

EN

Installation DM50NTE

18

6.6 Mounting the lock (lock version only)

➤ Drill a hole with a diameter of 35 mm into the decor.

➤ Mount the lock together with the lock decor.

6.7 Mounting the lock (no lock version only)

Disassembling the drawer (fig. 0, page 8)

➤ Open the drawer completely (A).

➤ Press the rail lock (A1).

➤ Pull the drawer out of the cabinet (B).

Only for DM50NTE D:

➤ Remove the two plugs (C1) from the screws (C2) of the door handle (C3).

➤ Unscrew the two screws (C2) of the door handle.

➤ Remove the door handle (C3).

➤ Remove the gasket.

➤ Remove the lock cover.

Drilling the holes (fig. a, page 8)

➤ Drill a hole (A1) with a diameter of 23.6 mm through the decor (only

DM50NTE D) and the door.

➤ Unscrew the twelve screws (B1) of the decor frame (B2) (only DM50NTE D).

➤ Remove the decor frame (only DM50NTE D).

Assembling the lock (fig. b, page 9)

➤ Put the new lock cover (A1) into place.

➤ Put the decor (B1) into the decor frame.

➤ Screw (B2) the decor frame (B3) onto the door.

➤ Install the door lock (C1).

➤ Install the lock catch (D1) in the cabinet.

EN

DM50NTE Operation

19

Assembling the drawer (fig. c, page 9)

➤ Push the gasket (1) on the decor frame (2).

➤ Screw the door handle (4) onto the door.

➤ Push the plugs (3) on the screws of the door handle (4).

➤ Push the drawer into the cabinet.

7Operation

!

A

7.1 Energy saving tips

• Do not open the cooling device more often than necessary.

• Do not leave the cooler unit open for longer than necessary.

7.2 Using the minibar

The minibar starts cooling when connected to power. During normal operation the

Power Status LED is glowing. If an error occurs the Error LED is blinking (see chapter

“Troubleshooting” on page 20).

7.3 Using the temperature setting function

The minibar is set by default to a cooling temperature of 7 °C at an ambient

temperature of 25 °C.

WARNING! Fire hazard!

• When positioning the device, ensure the supply cord is not trapped

or damaged.

• Do not locate multiple portable socket-outlets or portable power

supplies at the rear of the device.

NOTICE! Damage hazard

The lamp can only be replaced by the manufacturer, service agent or

similarly qualified person to avoid hazard.

EN

Troubleshooting DM50NTE

20

You can use the setting button (fig. 3 4, page 4) to set the cooling temperature to

one of three values (5 °C, 12 °C and 7 °C).

Thereby the temperature will be changed in the order 5 °C … 12 °C … 7 °C … 5 °C

etc.

➤ Press the setting button (fig. 3 4, page 4) and keep it pressed for 5 s, until the

internal lamp (fig. 3 1, page 4) starts to blink.

➤ Press immediately the setting button (fig. 3 4, page 4) again.

✓ The internal lamp (fig. 3 1, page 4) indicates the setting temperature:

– 5 °C: the lamp flashes five times in three intervals

– 12 °C: the lamp flashes once in three intervals

– 7 °C: the lamp flashes three times in three intervals

I

8 Troubleshooting

NOTE

The minibar sets the cooling temperature automatically to 7 °C, when it

is connected to a power source.

Fault Possible cause Suggested remedy

Device does not

function, Power Status

LED does not glow.

No voltage present in

the AC voltage socket.

Try using another plug socket.

The mains adapter is

defective.

This can only be repaired by an

authorised repair centre.

The device does not

cool (plug is inserted,

Power Status LED

glows).

The cooling element is

defective.

This can only be repaired by an

authorised repair centre.

The Error LED flashes

once per second.

Temperature sensor is

defective.

This can only be repaired by an

authorised repair centre.

The Error LED flashes

twice per second.

The fan is defective. This can only be repaired by an

authorised repair centre.

Device does not cool

sufficiently, Power

Status LED glows, Error

LED does not glow.

The cooling element is

defective.

This can only be repaired by an

authorised repair centre.

Poor ventilation Check the ventilation.

Clean the filter underneath the device.

La page charge ...

Dometic DM50NTE Mode d'emploi

Ce manuel convient également à

Dometic DM50NTE Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents