ARTHUR MARTIN ELECTROLUX AW6F3844BB Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur
AW6F3844BB
EN Washing Machine User Manual 2
FR Lave-linge Notice d'utilisation 35
CONTENTS
Safety information 2
Safety instructions 3
Installation 5
Accessories 8
Product description 10
Control panel 10
Dial and buttons 12
Programmes 15
Settings 19
Before first use 20
Daily use 20
Hints and tips 24
Care and cleaning 25
Troubleshooting 29
Consumption values 32
Technical Data 33
Subject to change without notice.
SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible for any injuries or damages that are the result of
incorrect installation or usage. Always keep the instructions
in a safe and accessible location for future reference.
Children and vulnerable people safety
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
the use of the appliance in a safe way and understand the
hazards involved.
Children between 3 and 8 years of age and persons with
very extensive and complex disabilities shall be kept away
unless continuously supervised.
Children of less than 3 years of age should be kept away
unless continuously supervised.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of it
appropriately.
Keep detergents away from children.
Keep children and pets away from the appliance when the
door is open.
If the appliance has a child safety device, it should be
activated.
2
Children shall not carry out cleaning and user maintenance
of the appliance without supervision.
General Safety
Do not change the specification of this appliance.
Do not exceed the maximum load of 8 kg (refer to the
"Programme chart" chapter).
The operating water pressure at the water entry point from
the outlet connection must be between 0.5 bar (0.05 MPa)
and 8 bar (0.8 MPa).
The ventilation opening in the base must not be covered
by a carpet, mat, or any floor covering.
The appliance must be connected to the water mains using
the new supplied hose sets, or other new hose sets
supplied by the Authorised Service Centre.
Old hose sets must not be reused.
If the mains power supply cable is damaged, it must be
replaced by the manufacturer, its Authorised Service
Centre or similarly qualified persons to avoid an electrical
hazard.
Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the socket.
Do not use high pressure water sprays and/or steam to
clean the appliance.
Clean the appliance with a moist cloth. Use only neutral
detergents. Do not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
SAFETY INSTRUCTIONS
Installation
The installation must comply
with relevant national
regulations.
Remove all the packaging and the
transit bolts including rubber bush with
plastic spacer.
Keep the transit bolts in a safe place. If
the appliance is to be moved in the
future they must be reattached to lock
the drum to prevent an internal
damage.
Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
Do not install or use a damaged
appliance.
Follow the installation instructions
supplied with the appliance.
3
Do not install or use the appliance
where the temperature can be less
than 0°C or where it is exposed to the
weather.
The floor area on which the appliance
is to be installed must be flat, stable,
heat resistant and clean.
Make sure that there is air circulation
between the appliance and the floor.
Do not install the appliance directly
above a floor drain.
Adjust the feet to have the necessary
space between the appliance and the
flooring.
Do not install the appliance where the
appliance door cannot be fully opened.
Do not put a container to collect
possible water leakage under the
appliance. Contact the Authorised
Service Centre to ensure which
accessories can be used.
Electrical connection
WARNING! Risk of fire and
electric shock.
The appliance must be earthed.
Always use a correctly installed
shockproof socket.
Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to the
mains plug and to the mains cable.
Should the mains cable need to be
replaced, this must be carried out by
our Authorised Service Centre.
Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
Do not touch the mains cable or the
mains plug with wet hands.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
This appliance complies with the E.E.C.
Directives.
Water connection
Do not cause damage to the water
hoses.
Before connection to new pipes, pipes
not used for a long time, where repair
work has been carried out or new
devices fitted (water meters, etc.), let
the water flow until it is clean and clear.
Ensure that there are no visible water
leaks during and after the first use of
the appliance.
Do not use an extension hose if the
inlet hose is too short. Contact the
service centre for the replacement of
the inlet hose.
You can extend the drain hose to
maximum 400 cm. Contact the service
centre for the other drain hose and the
extension.
Use
WARNING! Risk of injury,
electric shock, fire, burns or
damage to the appliance.
This appliance is for household use
only.
Follow the safety instructions on the
detergent packaging.
Do not put flammable products or items
that are wet with flammable products
in, near or on the appliance.
Make sure that all metal objects are
removed from the laundry.
Do not wash fabrics which are heavily
soiled with oil, grease or other greasy
substances. It can damage rubber
parts of the washing machine. Prewash
such fabrics by hand before loading
them into the washing machine.
Do not touch the glass door while a
programme is in operation. The glass
can get hot.
Service
To repair the appliance contact an
Authorised Service Centre.
4
Use original spare parts only.
Disposal
WARNING! Risk of injury or
suffocation.
Disconnect the appliance from the
mains electrical and water supplies.
Cut off the mains electrical cable close
to the appliance and dispose of it.
Remove the door catch to prevent
children or pets from becoming trapped
in the drum.
Dispose of the appliance in accordance
with local requirements for the disposal
of Waste Electrical and Electronic
Equipment (WEEE).
INSTALLATION
WARNING! Refer to Safety
chapters.
Unpacking
1. Remove the external film. If necessary, use a
cutter.
2. Remove the cardboard top and the polystyrene
packaging materials.
3. Open the door. Remove all the items from the
drum .
4. Put the front polystyrene packaging element
on the floor under the appliance. Carefully put
down the appliance onto its rear side.
5
5. Remove the polystyrene protection from the
bottom. Put the appliance back into an upright
position.
1
2
6. Remove the power supply cable and the drain
hose from the hose holders.
It is possible to see water flowing from the drain
hose. This is because the washing machine has
been tested at the factory.
7. Remove the three transit bolts and pull out the
plastic spacers.
8. Put the plastic caps, that you find in the user
manual bag, in the holes.
We recommend that you
keep the packaging and the
transit bolts for any transport
of the appliance.
Information for installation
1. Positioning and levelling
Correctly adjusting the appliance so that it
is level prevents vibration, noise and
movement of the appliance when in
operation.
1. Install the appliance on a flat hard floor.
The appliance must be levelled and
stable. Make sure that the appliance does
not touch the wall or other units and there
is air circulation below the appliance.
2. Loosen or tighten the feet to adjust the
level. All feet must rest firmly on the floor.
x4
WARNING! Do not put
cardboard, wood or equivalent
materials below the appliance
feet to adjust the level.
6
2. The inlet hose
CAUTION! Make sure there is
no damage to hoses and there
are no leaks from the
couplings. Do not use an
extension hose if the inlet hose
is too short. Contact the service
centre for a replacement inlet
hose.
1. Connect the water inlet hose to the
back of the appliance.
20
O
20
O
45
O
45
O
2. Position it toward left or right depending
on the positon of the water tap. Make sure
that the inlet hose is not in vertical
position.
3. If necessary, loosen the ring nut to set it
in the correct position.
4. Connect the water inlet hose to the cold
water tap with 3/4'' thread.
3. Water drainage
The drain hose should stay at a height of
no less than 60 cm and not more than 100
cm.
You can extend the drain hose
to maximum 400 cm. Contact
the authorised service centre
for the other drain hose and the
extension.
It is possible to connect the drain hose in
different ways:
1. Make a U shape with the drain hose
and put it around the plastic hose guide.
2. On the edge of a sink - Fasten the
guide to the water tap or to the wall.
Make sure that the plastic
guide cannot move when the
appliance drains and the drain
hose end is not immersed in
the water. There may be a
return of dirty water into the
appliance.
3. If the end of the drain hose looks like
this (see the picture), you can push it
directly into the stand pipe.
4. To a stand pipe with vent-hole - Insert
the drain hose directly into a drain pipe.
7
Refer to the illustration.
The end of the drain hose must
always be ventilated , i.e. the
inner diameter of the drain pipe
(min. 38 mm - min. 1.5") must
be larger than the external
diameter of the drain hose.
5.Without the plastic hose guide, to a
sink spigot- Put the drain hose in the
spigot and tighten it with a clamp. Refer to
the illustration.
Make sure that the drain hose makes a
loop to prevent particles going into the
appliance from the sink.
6. Position the hose directly to a built-in
drain pipe in the room wall and tighten it
with a clamp.
ACCESSORIES
Fixing plate kit (4055171146)
Available from your authorised dealer.
If you install the appliance on a plinth,
secure the appliance in the fixing plates.
Read carefully the instructions supplied
with the accessory.
8
Stacking kit
The tumble dryer can be stacked on the
top of the washing machine only by using
the correct stacking kit manufactured
and approved by ELECTROLUX.
Verify the compatible stacking
kit by checking the depth of
your appliances.
The stacking kit can be used only with the
appliances specified in the leaflet provided
with the accessory.
Read carefully the instructions supplied
with the appliance and with the accessory.
WARNING! Do not put the
tumble dryer under the washing
machine.
Pedestal with the drawer
To raise your appliance and make loading
and unloading laundry easier.
The drawer can be used for laundry
storage e.g.: towels, cleaning products
and more.
Read carefully the instructions supplied
with the accessory.
Available in www.electrolux.com/shop or from authorised dealer
Only appropriate accessories approved by ELECTROLUX ensure the safety
standards of the appliance. If unapproved parts are used, any claims will be
invalidated.
9
PRODUCT DESCRIPTION
Appliance overview
1 2 3
9
5
6
7
4
10
8
11 12
1
Worktop
2
Detergent dispenser
3
Control panel
4
Door handle
5
Rating plate
6
Drain pump filter
7
Feet for levelling the appliance
8
Drain hose
9
Inlet hose connection
10
Mains cable
11
Transit bolts
12
Hose support
CONTROL PANEL
Special features
Your new washing machine meets all
modern requirements for an effective
treatment of laundry with low water,
energy and detergent consumption and
will care for fabrics.
The SensiCare System automatically
adjusts the programme duration to the
laundry in the drum to achieve perfect
washing results in the minimum
possible time.
10
Control panel description
Marche/Arrêt
Coton
Synthétiques
licats
Rapide 14min
Rinçage
Vidange/Essorage
Coton Eco
Denim
Sports
Laine
Soie
Lavage tambour
Anti-Allergie Vapeur
Outdoor
Douceur
Plus
Taches
Prélavage
Time
Manager
Départ
Différé
Temp.
Essorage
Repassage
Facile
Rinçage
Plus
1 2 3 4 5 6 7
8910111213
1
Programme dial
2
Essorage reduction options touch
button
3
Temp. touch button
4
Display
5
Départ Différé touch button
6
Time Manager touch button
7
Départ/Pause touch button
8
Repassage Facile touch button
9
Douceur Plus touch button
10
Rinçage Plus touch button
11
Taches touch button
12
Prélavage touch button
13
Marche/Arrêt push button
Display
11
The Temperature area:
Temperature indicator
Cold water indicator
Child safety lock indicator.
Delay start indicator.
Door locked indicator.
The digital indicator can show:
Programme duration (e. g. ).
Delay time (e. g. ).
Cycle end ( ).
Warning code (e.g. ).
Time Manager bars level indicator.
Maximum laundry weight indicator.
Add garments indicator. Lights on during the beginning of the Wash
phase, while the user can still pause the appliance and add more
laundry.
Drum clean indicator.
Night indicator.
Rinse Hold indicator.
The spin area:
Spin speed indicator
No Spin indicator. Spin phase is off.
DIAL AND BUTTONS
Introduction
The options/functions are not
available with all washing
programmes. Check the
compatibility between options/
functions and washing
programmes in the
"Programme Chart". An option/
function can exclude another
one, in this case the appliance
doesn't allow you to set
incompatible options/functions.
Marche/Arrêt
Press this button for a few seconds to
activate or deactivate the appliance. Two
different tunes sound while switching the
appliance on or off.
As the Stand-by function automatically
deactivates the appliance after several
minutes to reduce the energy
consumption, you may need to activate
the appliance again.
For more details, refer to Stand-by
paragraph in Daily Use chapter.
12
Temp.
When you select a washing programme,
the appliance automatically proposes a
default temperature.
Touch this button repeatedly until the
desired temperature value appears on the
display.
When the display shows the indicators ,
the appliance does not heat the water.
Essorage
When you set a programme, the appliance
automatically sets the maximum spin
speed allowed, except for programme
Denim. With this option you can change
the default spin speed.
Touch this button repeatedly to:
Decrease the spin speed. The display
shows only the spin speeds available
for the set programme.
Activate the No Spin option.
Set this option to deactivate all spin
phases. The appliance performs the
only draining phase of the selected
washing programme. Set this option for
very delicate fabrics. The rinse phase
uses more water for some washing
programmes. The display shows the
indicator .
Activate the Rinse Hold option.
The final spin is not performed. The
water of the last rinse is not drained out
to prevent the fabrics from creasing.
The washing programme ends with
water in the drum.
The display shows the indicator .
The door stays locked and the drum
turns regularly to reduce creasing. You
must drain the water to unlock the door.
At the end of the programme, touch the
Départ/Pause button: the appliance
performs the spinning phase and drains
the water.
The appliance empties the
water out automatically after
18 hours approximately.
Activate the Night option.
The intermediate and the final spinning
phases are suppressed and the
programme ends with water in the
drum. This helps to reduce creasing.
The display shows the indicator .
The door stays locked. The drum turns
regularly to reduce creasing. You must
drain the water to unlock the door.
As the programme is very quiet, it is
suitable for use at night time when
cheaper electricity tariffs are available.
In some programmes the rinses are
performed with more water.
At the end of the programme, touch the
Départ/Pause button: the appliance
performs the only draining phase.
The appliance empties the
water out automatically after
18 hours approximately.
Prélavage
With this option you can add a prewash
phase to a washing programme.
The corresponding indicator above the
touch button illuminates.
Use this option to add a pre-wash
phase at 30 °C before the washing
phase.
This option is recommended for heavily
soiled laundry, especially if containing
sand, dust, mud and other solid
particles.
The options can increase the
programme duration.
Taches
Touch this button to add the stain phase
to a programme.
The corresponding indicator above the
touch button illuminates.
Use this option for laundry with hard stains
to remove.
When you set this option, put the stain
remover into compartment
.
13
This option increases the
programme duration.
This option is not available with
a temperature lower than 40
°C.
Permanent Rinçage Plus
With this option you can add a few rinses
according to the selected washing
programme.
Use this option for people with allergies to
detergent residues and with sensitive skin.
This option increases the
programme duration.
The corresponding indicator above the
touch button illuminates and also stays
permanently on during next cycles until
this option is deactivated.
Permanent Douceur Plus
Set this option to optimise the fabric
softener distribution and improve fabric
softness.
Recommended when you use fabric
softener.
This option increases the
programme duration.
The corresponding indicator above the
touch button illuminates and also stays
permanently on during next cycles until
this option is deactivated.
Repassage Facile
The appliance carefully washes and spins
the laundry to prevent the creases.
The appliance decreases the spin speed,
uses more water and adapts the
programme duration to the type of
laundry.
The related indicator comes on.
Départ Différé
With this option you can delay the start of
a programme to a more convenient time.
Touch the button repeatedly to set the
required delay. The time increases in
steps of 1 hour up to 20 hours.
After touching the Départ/Pause
button, the display shows the indicator
and the selected delay time and the
appliance begins the countdown and the
door is locked.
Time Manager
With this option you can reduce the
programme duration depending on the
load size and the degree of soiling.
When you set a washing programme, the
display shows the default duration and
dashes.
Touch Time Manager button to reduce the
programme duration according to your
needs. The display shows the new
programme duration and a number of
dashes will decrease accordingly:
suitable for a full load of normally
soiled garments.
a quick cycle for a full load of lightly
soiled garments.
very quick cycle for a smaller lightly
soiled load (max. half load
recommended).
the shortest cycle to freshen up a
small amount of laundry.
The Time Manager is available only with
the programmes in the table.
indicator
Coton
Coton Eco
Synthétiques
1)
14
indicator
Coton
Coton Eco
Synthétiques
1)
Default duration for all programmes.
Départ/Pause
Touch the Départ/Pause button to start,
pause the appliance or interrupt a running
programme.
PROGRAMMES
Programme Chart
Programme
Default tem‐
perature
Temperature
range
Maximum
spin
speed
Spin
speed
range
[rpm ]
Maxi‐
mum
load
Programme description
(Type of load and soil level)
Coton
40 °C
90 °C - Cold
1400 rpm
(1400-
400)
8 kg White cotton and coloured cotton. Normal and
heavy soil.
Coton Eco
1)
40 °C
60 °C - 40 °C
1400 rpm
(1400-
400)
8 kg White cotton and fast-coloured cotton. Normal
soil. The energy consumption decreases and the
time of the washing programme is extended.
Synthétiques
40 °C
60 °C - Cold
1200 rpm
(1200 -
400)
3 kg Synthetic items or mixed fabric items. Normal
soil.
Délicats
40 °C
40 °C - Cold
1200 rpm
(1200-
400)
3 kg Delicate fabrics such as acrylics, viscose and
mixed fabrics requiring gentler washing. Nor‐
mal soil.
Rapide 14min
30 °C
800 rpm
(800- 400)
1,5 kg Synthetic and mixed fabric items. Light soil and
items to freshen up.
15
Programme
Default tem‐
perature
Temperature
range
Maximum
spin
speed
Spin
speed
range
[rpm ]
Maxi‐
mum
load
Programme description
(Type of load and soil level)
Rinçage 1400 rpm
(1400-
400)
8 kg All fabrics, except woollens and very delicate
fabrics. Programme for rinsing and spinning the
laundry. The default spin speed is the one used
for cotton programmes. Reduce the spin speed
accordingly to the type of laundry. If necessary,
set the Rinçage Plus option to add rinses. With a
low spin speed, the appliance performs delicate
rinses and a short spin.
Vidange/
Essorage
1400 rpm
(1400
-400)
8 kg To spin the laundry and to drain the water in the
drum. All fabrics, except woollens and delicate
fabrics.
Anti-allergie
Vapeur
60 °C
1400 rpm
(1400 -
400)
8 kg White cotton items. This programme removes
micro-organisms thanks to a washing phase with
the temperature maintained above 60°C for some
minutes. This helps in removing germs, bacteria,
micro-organism and particles. The addition of va‐
pour together with an additional rinsing phase en‐
sures a proper removal of detergent residues and
pollens/allergenic items, making it suitable for deli‐
cate and sensitive skins .
Lavage tam‐
bour
60 °C
1200 rpm
(1200 -
400)
- Maintenance cycle with hot water to clean and
freshen the drum and to remove residue that may
cause odour. For the best result use this cycle
once a month. Before running this cycle, remove
all items from the drum. In the washing phase
compartment of the detergent dispenser, put the
flap of the compartment in upward position. Pour a
cup of chlorine bleach or a washing machine
cleaner in the washing phase compartment. DO
NOT use both together.
After the drum cleaning, run a fur‐
ther rinse cycle with empty drum
and no detergent to remove any
residue of bleach.
Soie
30 °C
800 rpm
(800 -
400)
3 kg Special programme for silk and mixed synthetic
items.
16
Programme
Default tem‐
perature
Temperature
range
Maximum
spin
speed
Spin
speed
range
[rpm ]
Maxi‐
mum
load
Programme description
(Type of load and soil level)
Laine
40 °C
40 °C - Cold
1200 rpm
(1200-
400)
1,5 kg Machine washable wool, hand washable wool
and other fabrics with «hand washing» care sym‐
bol
2)
.
Sports
30 °C
40 °C - Cold
1200 rpm
(1200 -
400)
3 kg Mixed fabric sportswear. Light soil items or
items to refresh.
Outdoor
30 °C
40 °C - Cold
1200 rpm
(1200-
400)
2 kg
3)
1 kg
4)
Do not use fabric softener and
make sure that there is no soften‐
er residue in the detergent dis‐
penser.
Synthetic sport items. This programme is de‐
signed to gently wash modern outdoor sportswear
and is also suitable for gym, cycling or jogging
clothes or similar. The recommended laundry load
is 2 kg.
Waterproof, waterproof-breathable and water
repellent fabrics. This programme can also be
used as a water repellency restoring cycle, specifi‐
cally tailored for treating clothes with a hydropho‐
bic coating. To perform the water repellency re‐
storing cycle, proceed as follows:
Pour the washing detergent in the compart‐
ment .
Pour a special water repellency restorer for
fabric into the softener compartment of the
drawer .
Reduce the laundry load to 1 kg.
To further improve the water re‐
pellency restoring action, dry the
laundry in a tumble dryer by set‐
ting the Outdoor drying pro‐
gramme (if available and if the
garment care label permits tum‐
ble drying).
17
Programme
Default tem‐
perature
Temperature
range
Maximum
spin
speed
Spin
speed
range
[rpm ]
Maxi‐
mum
load
Programme description
(Type of load and soil level)
Denim
30 °C
40 °C - Cold
1200 rpm
(1200 -
400)
3 kg Special programme for Denim clothing with
delicate washing phase to minimize colour
fading and marks. For better care a reduced load
size is recommended.
1)
Standard programmes for the Energy Label consumption values. According to regulation 1061/2010,
these programmes are respectively the «Standard 60°C cotton programme» and the «Standard 40°C cotton pro‐
gramme». They are the most efficient programmes in terms of combined energy and water consumption for
washing normally soiled cotton laundry.
The water temperature of the washing phase may differ from the temperature declared for the se‐
lected programme.
2)
During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn't rotate or
doesn't rotate properly, but this is normal for this programme.
3)
Washing programme.
4)
Washing programme and waterproofing phase.
Programme options compatibility
Programme
Essorage
Prélavage
Taches
Rinçage Plus
Douceur Plus
Repassage Facile
Départ Différé
Time Manager
Coton
Coton Eco
Synthétiques
Délicats
Rapide 14min
Rinçage
Vidange/Essor‐
age
Anti-allergie Va‐
peur
18
Programme
Essorage
Prélavage
Taches
Rinçage Plus
Douceur Plus
Repassage Facile
Départ Différé
Time Manager
Lavage tambour
Soie
Laine
Sports
Outdoor
Denim
Woolmark Apparel Care - Blue
The wool wash cycle of this machine has been
approved by The Woolmark Company for the
washing of wool garments labelled as «hand
wash» provided that the garments are washed
according to the instructions issued by the
manufacturer of this washing machine. Follow
the garment care label for drying and other
laundry instructions. M1512
The Woolmark symbol is a Certification mark
in many countries.
SETTINGS
Acoustic signals
This appliance has different acoustic
signals, that operate when:
You activate the appliance (special
short tune).
You deactivate the appliance (special
short tune).
You touch the buttons (click sound).
You make an invalid selection (3 short
sounds).
The programme is completed
(sequence of sounds for about 2
minutes).
The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
To deactivate/activate the acoustic
signals when the programme is
completed, touch the Prélavage and the
Taches buttons simultaneously for about 2
seconds. The display shows On/Off
If you deactivate the acoustic
signals, they continue to
operate when the appliance
has a malfunction.
19
Child Lock
With this option you can prevent children
from playing with the control panel.
To activate/deactivate this option,
hold down the Repassage Facile button
until comes on/goes off on the
display.
The appliance will default to this option
after you switch it off.
The Child Lock function may not be
available for a few seconds after switching
the appliance on.
BEFORE FIRST USE
1. Make sure that the electrical power is
available and the water tap is open.
2. Pour a small quantity of detergent into
the compartment marked by .
3. Set and start a programme for cotton
at the highest temperature without any
laundry in the drum.
This removes all possible dirt from the
drum and the tub.
DAILY USE
WARNING! Refer to Safety
chapters.
Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the Marche/Arrêt button for a
few seconds to activate the appliance.
A short tune sounds.
Loading the laundry
1. Open the appliance door.
2. Shake the items before you put them
in the appliance.
3. Put the laundry in the drum, one item
at a time.
Do not put too much laundry in the drum.
4. Close the door firmly.
CAUTION! Make sure that no
laundry gets caught between
the seal and the door to avoid
risk of water leakage and
damage to the laundry.
Washing heavily oiled, greasy
stains could cause damage to
rubber parts of the washing
machine.
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72

ARTHUR MARTIN ELECTROLUX AW6F3844BB Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur

dans d''autres langues