LG LRSXS2706B Le manuel du propriétaire

Marque: LG

Modèle: LRSXS2706B

Catégorie: Frigos

Taper: Le manuel du propriétaire

OWNER'S MANUAL

SIDE BY SIDE

REFRIGERATOR

ENGLISH

LRSDS2706*, LRSXS2706*, LRSOS2706*, LRSOC2306*, LRSXC2306*, LHSXS2706*,

LRSVS2706*, LRSWS2806*, LLSDS2706*

MFL71823916

Rev.02_021023

www.lg.com

Scan to see the online manual.

Read this owner’s manual thoroughly before operating the appliance

and keep it handy for reference at all times. This abridged owner's

manual addresses user safety, precautions, and installation

information.

To view the complete owner's manual, you may:

1. Online manual: Visit the LG website at: http://gscs-manual.lge.com/

Total/HQ/GatewayPage/main.html or scan the QR code above; or

2. Printable PDF manual: Visit lg.com and search for your model

number; or

3. Call or write to customer service as provided in your Limited

Warranty.

en-us_main.book.book Page 1 Friday, February 10, 2023 11:43 AM

TABLE OF CONTENTS

3 IMPORTANT SAFETY

INSTRUCTIONS

3 READ ALL INSTRUCTIONS BEFORE USE

3WARNING

6CAUTION

8 PRODUCT OVERVIEW

8 Product Features

9 INSTALLATION

9 Before Installing

10 Choosing the Proper Location

11 Removing/Assembling Doors

15 Connecting Refrigerator to Water Supply

17 Leveling and Door Alignment

17 Turning on the Power

19 OPERATION

19 Online Owner's Manual

20 Control Panel

22 Sabbath Mode

23 InstaView

23 Ice and Water Dispenser

24 Automatic Icemaker

26 SMART FUNCTIONS

26 LG ThinQ Application

28 Smart Grid Function

29 MAINTENANCE

29 Cleaning

29 Air Filter

30 Water Filter

35 TROUBLESHOOTING

35 FAQs

36 Before Calling for Service

37 LIMITED WARRANTY

37 USA

41 Canada

en-us_main.book.book Page 2 Friday, February 10, 2023 11:43 AM

3IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

Safety Messages

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and

follow all safety messages.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury,

and tell you what may happen if the instructions are not followed.

WARNING

• To reduce the risk of explosion, fire, death, electric shock, scalding or injury to persons when using this

product, follow basic precautions, including the following:

Installation

• To reduce the risk of injury to persons, adhere to all industry recommended safety procedures including

the use of long-sleeved gloves and safety glasses.

• Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has

missing or broken parts, including a damaged cord or plug.

• Only connect this product to a dedicated grounded electrical outlet rated for use with this product (115

V, 60 Hz, AC only). It is the user’s responsibility to replace a standard 2-prong wall outlet with a standard

3-prong wall outlet.

• Do not use an outlet that can be turned off with a switch. Do not use an extension cord.

• The appliance must be positioned for easy access to a power source.

• When moving the refrigerator, be careful not to roll over or damage the power cord.

• Contact an authorized service center when installing or relocating the refrigerator.

• Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

• Keep packing materials out of the reach of children. Packaging material can be dangerous for children.

There is a risk of suffocation.

• Do not install the refrigerator in a damp or dusty place where insulation on electrical parts may

deteriorate.

• Do not place the refrigerator in direct sunlight or expose it to the heat from heating appliances such as

stoves or heaters.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages

will follow the safety alert symbol and either the word WARNING or CAUTION.

These words mean:

WARNING

You may be killed or seriously injured if you do not follow instructions.

CAUTION

You may be injured or cause damage to the product if you do not follow instructions.

en-us_main.book.book Page 3 Friday, February 10, 2023 11:43 AM

4IMPORTANT SAFETY INSTRUCTIONS

• Do not bend or pinch the power cord excessively or place heavy objects on it.

Operation

• This appliance is intended to be used in household and similar applications such as:

- staff kitchen areas in shops, offices and other working environments;

- farm houses and by clients in hotels, motels and other residential type environments;

- bed and breakfast type environments;

- catering and similar non-retail applications.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for their safety.

• This product is not to be used for special purposes such as the storage of medicine or test materials or

for use on ships, etc.

• DO NOT allow children to climb, stand, or hang on the refrigerator doors or on the shelves in the

refrigerator. They could damage the refrigerator and seriously injure themselves.

• Do not allow children to climb into the refrigerator. They could be trapped and suffocated.

• Children should be supervised to ensure that they do not play with the refrigerator.

• Keep fingers out of pinch point areas; clearances between the doors and cabinets are necessarily small.

Be careful closing doors when children are nearby.

• Do not touch frozen food or the metal parts in the freezer compartment with wet or damp hands. Doing

so may cause frostbite.

• Do not refreeze frozen food that has thawed completely. Doing so may result in a serious health hazard.

• Do not use an adapter plug or plug the power plug into a multi-outlet extension cord.

• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly

qualified person in order to avoid a hazard.

• Do not operate the refrigerator or touch the power cord with wet hands.

• Do not modify or extend the power cord.

• Do not use an uncertified power outlet. Do not plug appliance into a damaged wall outlet.

• Do not put hands, feet or other objects into the air vents or bottom of the refrigerator. Doing so could

result in personal injury or electric shock.

• In the event of a gas leak (propane/LPG), ensure the area is adequately ventilated and contact an

authorized service center before resuming use. Do not touch the refrigerator or power cord of the

refrigerator.

• Disconnect the power cord immediately and contact an authorized service center if there is a strange

noise, odor, or smoke coming from the appliance.

• Do not use any fuse (such as copper, steel wire, etc.) other than a standard fuse.

• Do not put animals inside the appliance.

• Do not place heavy or fragile objects, liquid filled containers, combustible substances, or flammable

objects (such as candles and lamps) on the appliance.

• If connected to a circuit protected by fuses, use time delay fuse.

• Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

• Do not use mechanical devices or other means to accelerate the defrosting process, other than those

recommended by the manufacturer.

• Do not use electrical appliances inside the food storage compartments of the appliance, unless they are

of the type recommended by the manufacturer.

• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

en-us_main.book.book Page 4 Friday, February 10, 2023 11:43 AM

5IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

• If the Durabase divider is removed, there is enough open space for children or pets to crawl inside. To

prevent accidental child and pet entrapment or suffocation risk, DO NOT allow children or pets to touch

or go near the drawer.

• Do not damage the refrigerant circuit.

• This appliance incorporates an earth connection for functional purposes.

Maintenance

• Do not use a hair dryer to dry the inside of the refrigerator.

• Do not light a candle to remove odors in the refrigerator.

• In the event of a refrigerant leak, move flammable objects away from the refrigerator. Ensure the area is

adequately ventilated and contact an authorized service center.

• Keep flammable materials and vapors, such as gasoline, away from the refrigerator.

• Unplug the power plug before cleaning or repairing the refrigerator.

• The refrigerator and freezer compartment lights are interior LED lighting, and service should be

performed by a qualified technician.

• Unplug the power plug immediately in the event of a blackout or thunderstorm.

• Turn the power off if water or dust penetrates into the refrigerator. Call a service agent.

• Do not store glass containers or soda in the freezer compartment. Contents may expand when frozen,

break the container and cause injury.

• Do not store, disassemble or repair the appliance yourself or allow unqualified personnel to do so.

Disposal

• Risk of child entrapment. Junked or abandoned refrigerators are dangerous, even if they are sitting for

only a few days. When disposing of the refrigerator, remove the packing materials from the door or take

off the doors but leave the shelves in place so that children may not easily climb inside.

• If disposing of a refrigerator, make sure the refrigerant and insulation foam are removed for proper

disposal by a qualified servicer. If you release the refrigerant or throw away the insulation foam, you

may be fined or imprisoned in accordance with the relevant environmental law. Insulation foam contains

flammable blowing gas.

• When discarding the appliance, remove the door gasket while leaving the shelves and bins in place, and

keep children away from the appliance.

Grounding Instructions

• Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check

with a qualified electrician or service personnel if you are in doubt whether the appliance is properly

grounded. Do not modify the plug provided with the appliance; if it will not fit the outlet, have a proper

outlet installed by a qualified electrician.

• Have a certified electrician check the wall outlet and wiring for proper grounding.

• Never unplug the appliance by pulling on the power cord. Always grip the plug firmly and pull straight

out from the outlet. Failure to do so may damage the power cord, resulting in a risk of fire and electric

shock.

en-us_main.book.book Page 5 Friday, February 10, 2023 11:43 AM

6IMPORTANT SAFETY INSTRUCTIONS

Risk of Fire and Flammable Materials

CAUTION

• To reduce the risk of minor or moderate injury to persons, malfunction, or damage to the product or

property when using this product, follow basic precautions, including the following:

Installation

• Do not install the refrigerator where there may be a danger of the unit falling.

• The refrigerator must be properly installed in accordance with the Installation Instructions.

• This appliance does not require changes in installation or use based on altitude.

Operation

• This appliance is intended to be used only in domestic and similar applications.

• Do not scratch the refrigerator with a sharp object or use a detergent that contains alcohol, a flammable

liquid or an abrasive when removing any tape or adhesive from the refrigerator. Remove adhesive

residue by wiping it off with your thumb or dish detergent.

• Do not peel off the model or serial number label or the technical information on the rear surface of the

refrigerator.

• Putting food in the refrigerator before it has cooled could cause the food to spoil, or a bad odor to

remain inside the refrigerator.

• Keep hands and tools out of the ice compartment door and dispenser chute. Failure to do so may result

in damage or personal injury.

• Keep the ice compartment door closed tightly. If the ice compartment door is not closed tightly, the cold

air in the ice bin will freeze food in the refrigerator compartment. This could also cause the icemaker to

stop producing ice.

• Storing cans or other items in the ice bin will damage the icemaker.

• Store only ice in the ice bin. Do not store ice scooping tools or other items in the ice bin.

• Ice may overflow when removing or assembling the ice bin. Remove any ice in the bin area before

assembling the ice bin.

• Make sure that the ice bin is assembled in the correct orientation front to back.

• Models with two ice bins in the freezer:

- The Craft Ice bin is located on the left and the Mini Cubed Ice bin is located on the right. Do not

change the positions of the two ice bins.

- Do not store Craft Ice in the Mini Cubed Ice bin or Mini Cubed Ice in the Craft Ice bin.

This appliance contains a small amount of isobutane refrigerant (R600a), which is combustible.

When transporting and installing the appliance, care should be taken to ensure that no parts

of the refrigerating circuit are damaged. Refrigerant squirting out of the pipes could ignite or

cause an eye injury. If a leak is detected, avoid any naked flames or potential sources of

ignition and air out the room in which the appliance is standing for several minutes.

In order to avoid the creation of a flammable gas air mixture if a leak in the refrigerating

circuit occurs, the size of the room in which the appliance may be sited depends on the

amount of refrigerant used. The room must be 10.8 square feet (1 square meter) in size for

every 8g of R600a refrigerant inside the appliance. The amount of refrigerant in your

particular appliance is shown on the identification plate inside the appliance. Never start up an

appliance showing any signs of damage. If in doubt, consult your dealer.

en-us_main.book.book Page 6 Friday, February 10, 2023 11:43 AM

7IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

SAVE THESE INSTRUCTIONS

• Never use thin crystal glasses or containers to collect ice. Such containers may chip or break resulting in

glass fragments in the ice.

• Only qualified service personnel from an LG Electronics service center should disassemble or repair the

icemaker.

• When handling the ice bin, keep hands away from the icemaker tray area to avoid personal injury.

• Avoid touching the auto shutoff (feeler arm) when replacing the ice bin. See the label on the ice

compartment door for details.

• Do not use aerosols near the refrigerator.

• Do not strike or apply excessive force to any glass surface. Do not touch glass surfaces if they are

cracked or broken.

• Do not overfill or pack items too tightly into door bins. Doing so may cause damage to the bin or

personal injury if items are removed with excessive force.

• Do not store glass containers in the freezer. Contents may expand when frozen, break the container and

cause injury.

• Glass shelves are heavy. Use special care when removing them.

• Do not clean glass shelves with warm water while they are cold. Shelves may break if exposed to sudden

temperature changes or impact.

• Make sure that shelves are level from one side to the other. Failure to do so may result in the shelf falling

or spilled food.

• Regularly detach and wash the storage bins and shelves; they can become easily contaminated by food.

• Do not apply excessive force while detaching or assembling the storage bins.

• Do not use the dishwasher to clean the storage bins and shelves.

Maintenance

• Do not use strong detergents like wax or thinners for cleaning. Clean with a soft cloth.

• Remove foreign objects (such as dust and water) off the prongs of the power plug and contact areas. Do

not use a wet or damp cloth when cleaning the plug.

• Do not spray water directly on the inside or outside of the refrigerator.

• Do not clean glass shelves or covers with warm water when they are cold. They may break if exposed to

sudden temperature changes.

en-us_main.book.book Page 7 Friday, February 10, 2023 11:43 AM

8PRODUCT OVERVIEW

PRODUCT OVERVIEW

Product Features

The images in this guide may be diﬀerent from the actual components and accessories, which are subject

to change by the manufacturer without prior notice for product improvement purposes.

Product Speciﬁcations

The appearance and speciﬁcations listed in this manual may vary due to constant product improvements.

Electrical requirements: 115 V, 60 Hz

Min. / Max. water pressure: 20 - 120 psi (138 - 827 kPa)

Model Description Net weight

LRSDS2706* Standard-depth, Door-in-Door Side by Side Refrigerator, Craft Ice 284 lb (129 kg)

LRSXS2706* Standard-depth, Side by )gk 021( bl 562rotaregirfeR ediS

LRSOS2706* Standard-depth, Instaview Side by Side Refrigerator, Craft Ice 300 lb (136 kg)

LRSOC2306* Standard-depth, Door-in-Door Side by Side Refrigerator, Craft Ice 276 lb (125 kg)

LRSXC2306* Standard-depth, Side by Side Refrigerator 240 lb (109 kg)

LRSVS2706* Standard-depth, Instaview Door-in-Door Side by Side Refrigerator,

Craft Ice

302 lb (137 kg)

LHSXS2706* Standard-depth, Side by Side Refrigerator, Craft Ice 278 lb (126 kg)

LRSWS2806* Standard-depth, Side by Side Refrigerator, Automatic Icemaker 258 lb (117 kg)

LLSDS2706* Standard-depth, Door-in-Door Side by Side Refrigerator 278 lb (126 kg)

en-us_main.book.book Page 8 Friday, February 10, 2023 11:43 AM

9INSTALLATION

ENGLISH

INSTALLATION

Before Installing

Installation Overview

Please read the following installation instructions first after purchasing this product or transporting it to

another location.

aUnpacking the Refrigerator

bChoosing the Proper Location

cDisassembling/Assembling

dConnecting the Water Line

eLeveling and Door Alignment

WARNING

• Connect to potable water supply only.

en-us_main.book.book Page 9 Friday, February 10, 2023 11:43 AM

10 INSTALLATION

Unpacking the Refrigerator

WARNING

• Use two or more people to move and install the

refrigerator. Failure to do so can result in back

injury or other injury.

• The refrigerator is heavy. Protect the floor when

moving the refrigerator for cleaning or service.

Always pull the refrigerator straight out when

moving it. Do not wiggle or walk the refrigerator

when trying to move it, as floor damage could

occur.

• Keep flammable materials and vapors, such as

gasoline, away from the refrigerator. Failure to

do so can result in fire, explosion, or death.

NOTE

• Remove tape and any temporary labels from

your refrigerator before using. Do not remove

any warning labels, the model and serial number

label, or the Tech Sheet that is located under the

front of the refrigerator.

• To remove any remaining tape or glue, rub the

area briskly with your thumb. Tape or glue

residue can also be easily removed by rubbing a

small amount of liquid dish soap over the

adhesive with your fingers. Wipe with warm

water and dry.

• Do not use sharp instruments, rubbing alcohol,

flammable fluids, or abrasive cleaners to remove

tape or glue. These products can damage the

surface of your refrigerator.

• Reinstall or adjust shelves as needed.

Refrigerator shelves are installed in the shipping

position. Reinstall shelves according to your

individual storage needs.

Choosing the Proper

Location

Water

The refrigerator must be located where a water

supply can be connected for the automatic

icemaker.

NOTE

• The water pressure must be 20 - 120 psi (138 -

827 kPa). If the refrigerator is installed in an area

with low water pressure (below 20 psi or 138

kPa), you can install a booster pump to

compensate for the low pressure.

Electricity

Use an individual, grounded outlet:115 Volts, 60

Hz, AC, 15 amps minimum.

WARNING

• Do not overload house wiring and cause a fire

hazard by plugging in multiple appliances in the

same outlet with the refrigerator.

• To reduce the risk of electric shock, do not install

the refrigerator in a wet or damp area.

Flooring

To avoid noise and vibration, the unit must be

installed and leveled on a solidly constructed floor.

If required, adjust the leveling legs to compensate

for the unevenness of the floor.

NOTE

• Installing on carpeting, soft tile surfaces, a

platform or weakly supported structure is not

recommended.

Ambient Temperature

Install this appliance in an area where the

temperature is between 55 °F (13 °C) and 110 °F

(43 °C).

If the temperature around the appliance is too low

or high, cooling ability may be adversely affected.

en-us_main.book.book Page 10 Friday, February 10, 2023 11:43 AM

11INSTALLATION

ENGLISH

Dimensions and Clearances

• Check the dimensions of the appliance and the installation path to ensure there is sufficient room to

move the refrigerator through doors or narrow openings.

• If an opening is too narrow to fit the refrigerator through, remove the refrigerator doors. See Removing/

Assembling the Doors and Drawers in this manual.

• The installation location chosen for the refrigerator should allow space behind the unit for connections

and airflow and space in front to open the doors and drawers.

• Too small of a distance from adjacent items may result in lowered freezing capability and increased

electricity consumption charges. Allow at least 2 inches (50 mm) between the back of the refrigerator

and the wall.

• Remember to allow enough room in front of the refrigerator to fully open the doors and drawers.

Removing/Assembling

Doors

If the entrance door is too narrow for the

refrigerator to pass through, remove the

refrigerator doors and move the refrigerator

sideways through the doorway.

CAUTION

• Use two or more people to remove and install

the refrigerator doors.

• Disconnect the electrical supply to the

refrigerator before installing.

• Do not put hands, feet or other objects into the

air vents or bottom of the refrigerator.

• Be careful when handling the hinge and hinge

lever.

-Dimension/Clearance

LRSDS2706*,

LRSXS2706*,

LRSOS2706*,

LRSVS2706*,

LHSXS2706*,

LRSWS2806*,

LLSDS2706*

LRSOC2306*,

LRSXC2306*

A Depth 33 7/16" (850 mm) 28 15/16" (735 mm)

B Width 35 7/8" (912 mm) 35 7/8" (912 mm)

C Height to Top of Case 68 7/8" (1750 mm) 68 7/8" (1750 mm)

D Height to Top of Hinge 70 1/2" (1790 mm) 70 1/2" (1790 mm)

E Back Clearance 2" (50 mm) 2" (50 mm)

F Depth without Door 28 7/8" (735 mm) 24 3/8" (620 mm)

G Depth (Total with Door Open 90°) 51" (1295 mm) 46 1/2" (1180 mm)

en-us_main.book.book Page 11 Friday, February 10, 2023 11:43 AM

12 INSTALLATION

CAUTION

• Remove food and bins before detaching the

doors.

• Do not hold the handle when removing or

replacing the doors as the handle may come off.

• Tools Needed

- Flat-head screwdriver

- Phillips screwdriver

Removing the Hinge Cover

Remove the screws from the hinge cover at the top

of the refrigerator. Lift the hook (not visible),

located at the bottom of the front side of the cover

with a flat-head screwdriver.

Removing the Freezer Door

1 The water supply is connected to the upper

right part of the rear surface of the

refrigerator. Remove the clip in the joint area.

Hold the water supply connection and gently

push the collet a to detach the water supply

line as shown.

NOTE

• Disassembling/Assembling the Water Lines

b Collet c Tube d Insert line e Clip

2 Remove the screws from the water line cover

f and detach the cover.

3 Pull out the water supply lines g. Disconnect

all the wire harnesses h. Unscrew the ground

wire i.

NOTE

• The number of wire harnesses may vary

depending on the model.

• Ground wire is only present on some models.

4 Rotate the hinge lever j counterclockwise.

Lift the top hinge k free of the hinge lever

latch l.

CAUTION

• When lifting the hinge free of the latch, be

careful that the door does not fall forward.

5 Free the hinge from the water lines and wire

harnesses and set it aside.

en-us_main.book.book Page 12 Friday, February 10, 2023 11:43 AM

13INSTALLATION

ENGLISH

6 Lift the door from the bottom hinge pin m

and place it, inside facing up, on a non-

scratching surface.

Removing the Refrigerator Door

1 Detach all the wire harnesses a. Unscrew the

ground wire b.

2 Rotate the hinge lever c clockwise. Lift the

top hinge d free of the hinge lever latch e.

CAUTION

• When lifting the hinge free of the latch, be

careful that the door does not fall forward.

3 Lift the door from the bottom hinge pin f.

4 Place the door, inside facing up, on a non-

scratching surface.

Assembling the Refrigerator Door

1 Place the door onto the bottom hinge pin a.

2 Fit the hinge b over the hinge lever latch c

and slot it into place. Rotate the lever d

counterclockwise to secure the hinge.

NOTE

• Align the refrigerator door with the cabinet to

help fit the top hinge in place.

3 Connect all the wire harnesses e. Screw in

the ground wire f.

en-us_main.book.book Page 13 Friday, February 10, 2023 11:43 AM

14 INSTALLATION

NOTE

• The number of wire harnesses may vary

depending on the model.

• Ground wire is only present on some models.

Assembling the Freezer Door

1 Install the freezer door onto the bottom hinge

pin a.

2 Fit the hinge b over the hinge lever latch c

and slot it into place. Rotate the lever d

clockwise and fasten the hinge.

NOTE

• Align the freezer door with the cabinet to help fit

the top hinge in place.

3 Connect all the wire harnesses and the

ground wire.

4 Push the water supply lines into the hole on

the top case and pull them through the

backplate.

NOTE

• The number of wire harnesses may vary

depending on the model.

• Ground wire is only present on some models.

5 Hold the water supply connection and gently

push in the collet e to connect the water

supply lines as shown. Insert the tube at least

5/8 inch (15 mm) into the connector. Insert

the clip on the joint to fasten the tubes in

place.

NOTE

• Disassembling/Assembling the Water Lines

f Collet g Tube h Insert line i Clip

en-us_main.book.book Page 14 Friday, February 10, 2023 11:43 AM

15INSTALLATION

ENGLISH

• Gently press the collet and insert the tube until

only one line shows on the tube.

Assembling the Hinge Cover

Position the hinge cover in its place. Insert and

tighten the cover screws.

Connecting Refrigerator to

Water Supply

Before Beginning

These instructions assume you have an existing

water supply connection for the refrigerator. If

necessary, call a qualified plumber to install a

water supply line for the refrigerator.

• Turn the icemaker OFF if the refrigerator will be

used before the water line is connected.

• Do not install the icemaker tubing in areas

where the ambient temperatures fall below

freezing.

WARNING

• Connect to potable water supply only.

CAUTION

• To prevent burns and product damage, only

connect the refrigerator water line to a cold

water supply.

• Wear eye protection during installation to

prevent injury.

Water Pressure

You will need a cold water supply.

Water Pressure

•Models with water filter:

- 20 - 120 psi (138 - 827 kPa)

•Where reverse osmosis water filtration

system is connected to a cold water supply:

- 40 - 60 psi minimum to reverse osmosis

system (2.8 kgf/cm2 - 4.2 kgf/cm2, or less than

2 - 3 seconds to fill a cup of 7 oz capacity)

If the water pressure from the reverse osmosis

system is less than 20 psi or 138 kPa or 1.4 kgf/cm2

(takes more than 4 seconds to fill a cup of 7 oz or

198 cc capacity):

• Check to see if the sediment filter in the reverse

osmosis system is blocked. Replace the filter if

necessary.

• Allow the storage tank on the reverse osmosis

system to refill after heavy usage.

• If the water pressure remains low, call a

licensed, qualified plumber.

• All installations must be in accordance with local

plumbing code requirements.

Supplies Needed

•Copper or PEX Tubing, ¼ in. outer diameter, to

connect the refrigerator to the water supply. Be

sure both ends of the tubing are cut square. To

determine how much tubing you need, measure

the distance from the water valve on the back of

the refrigerator to the water supply pipe. Then,

add 8 feet (2.4 m). Be sure there is sufficient

extra tubing (about 8 feet [2.4 m] coiled into 3

turns of about 10 in. [25 cm] diameter) to allow

the refrigerator to move out from the wall after

installation.

•½ in. or adjustable wrench.

•Flat-blade and Phillips screwdrivers.

•Two ¼ in. outer diameter compression nuts

and 2 ferrules (sleeves) to connect the copper

tubing to the shutoff valve and the refrigerator

water valve. If you are using a PEX water line kit,

it may already have the required fittings at either

end.

• If your existing copper water line has a flared

fitting at the end, purchase an adapter (available

at plumbing supply stores) to connect the water

line to the refrigerator OR cut off the flared

en-us_main.book.book Page 15 Friday, February 10, 2023 11:43 AM

16 INSTALLATION

fitting with a tube cutter and use a compression

fitting.

NOTE

• The hookup line cannot be white, plastic tubing.

Licensed plumbers must use only copper tubing

(NDA tubing #49595 or #49599) or Cross Link

Polyethylene (PEX) tubing.

• Be sure there is sufficient extra tubing (about 8

ft. coiled into three turns of about 10 in.

diameter) to allow the refrigerator to move out

from the wall after installation.

Connecting Water Line to

Refrigerator

1 Connect the tubing to the shutoff valve.

• Place the compression nut and ferrule

(sleeve) onto the end of the copper tubing

and connect it to the shutoff valve. If you

are using PEX, the tubing may already have

the required fittings at either end. Make

sure the tubing is fully inserted into the

valve. Tighten the compression nut

securely.

aPacking Nut

bShutoff Valve

cCompression Nut

dFerrule (sleeve)

2 Flush out the tubing into a bucket.

• Flush out the tubing coming from the home

water supply until the water is clear. Shut

the water off at the water valve after about

one quart of water has been flushed

through the tubing.

NOTE

• Before making the connection to the

refrigerator, be sure that the refrigerator power

cord is not plugged into the wall outlet.

3 Remove the flexible plastic cap from the water

valve on the refrigerator.

4 Place the compression nut and ferrule (sleeve)

onto the end of the tubing as shown. If you

are using a PEX connection kit, it may already

have the required fittings.

5 Insert the end of the copper or PEX tubing

into the connection as far as possible. While

holding the tubing, tighten the fitting.

aTubing Clamp

b¼ in. Tubing

c¼ in. Compression Nut

dFerrule (sleeve)

eRefrigerator Connection

6 Turn the water on at the shutoff valve.

• Tighten any connections that leak.

CAUTION

• Check to see if leaks occur at the water line

connections.

en-us_main.book.book Page 16 Friday, February 10, 2023 11:43 AM

17INSTALLATION

ENGLISH

• Make sure the house water valve is fully open. If

it is not open completely, the icemaker and

dispenser may not work properly.

Leveling and Door

Alignment

Leveling

The refrigerator has two front leveling legs. Adjust

the legs to alter the tilt from front-to-back or side-

to side. If the refrigerator seems unsteady, or the

doors do not close easily, adjust the refrigerator’s

tilt using the instructions below:

1 Turn the leveling leg to the left to raise that

side of the refrigerator or to the right to lower

it. It may take several turns of the leveling leg

to adjust the tilt of the refrigerator.

NOTE

• A flare nut wrench works best, but an open-end

wrench will suffice. Do not over-tighten.

2 Open both doors and check to make sure that

they close easily. If the doors do not close

easily, tilt the refrigerator slightly more to the

rear by turning both leveling legs to the left. It

may take several more turns, and be sure to

turn both leveling legs the same amount.

Door Alignment

Both the left and right refrigerator doors have an

adjustable nut, located on the bottom hinge, to

raise and lower them to align properly.

If the space between the doors is uneven, follow

the instructions below to align the doors evenly:

Use the wrench (included with the owner's

manual) to turn the nut in the door hinge to adjust

the height.

1 Open the door and use the wrench to loosen

the keeper nut by turning it to the left.

2 Use the wrench to adjust the height by

turning the adjustment hinge pin to the right

to raise the door or to the left to lower it.

3 Use the wrench to fasten the keeper nut by

turning it to the right.

CAUTION

• Do not overtighten the door adjustment screw.

The hinge pin can be pulled out and the

adjustable range of height is a maximum of 2 in.

(5 cm).

Turning on the Power

• After installing, plug the refrigerator’s power

cord into a 3-prong grounded outlet and push

the refrigerator into the final position.

en-us_main.book.book Page 17 Friday, February 10, 2023 11:43 AM

18 INSTALLATION

CAUTION

• Connect to a rated power outlet.

• Have a certified electrician check the wall outlet

and wiring for proper grounding.

• Do not damage or cut off the ground terminal of

the power plug.

Position the Refrigerator

• Arrange the coil of tubing so that it does not

vibrate against the back of the refrigerator or

against the wall. Push the refrigerator back to

the wall.

Start the Icemaker

• If the water line is connected, turn the icemakers

on.

- To turn the icemakers on, refer to Control

Panel in the Operation section.

• The icemaker will not begin to operate until it

reaches its operating temperature of 15 °F (–9

°C) or below. It will then begin operation

automatically if the icemaker has been turned

ON.

en-us_main.book.book Page 18 Friday, February 10, 2023 11:43 AM

19OPERATION

ENGLISH

OPERATION

Online Owner's Manual

Additional Operation Information

The complete owner’s manual can be found on the LG website at: http://gscs-manual.lge.com/Total/HQ/

GatewayPage/main.html?product=Refrigerator&ptype=SxS or by scanning the QR code.

en-us_main.book.book Page 19 Friday, February 10, 2023 11:43 AM

20 OPERATION

Control Panel

Depending on the model, some of the following functions may not be available.

The actual control panel may differ from model to model.

Control Panel Features

Refrigerator Control Panel

† This feature is only available on some models.

aRefrigerator

Indicates the set temperature of the refrigerator compartment in Celsius (℃) or Fahrenheit (℉). The

default refrigerator temperature is 37 ℉ (3 ℃). Press the Refrigerator button repeatedly to select a

new set temperature from 33 ℉ to 43 ℉ (1 ℃ to 7 ℃).

NOTE

•(For Type A) To change the temperature mode from ℉ to ℃ (or vice versa) press and hold the

Refrigerator and Freezer buttons simultaneously for approximately five seconds. The temperature

indicator on the display window switches between Celsius and Fahrenheit.

• The displayed temperature is the target temperature, and not the actual temperature of the refrigerator.

The actual refrigerator temperature depends on the food inside the refrigerator.

Type A Type B

en-us_main.book.book Page 20 Friday, February 10, 2023 11:43 AM

La page charge ...

LG LRSXS2706B Le manuel du propriétaire

Marque: LG

Modèle: LRSXS2706B

Catégorie: Frigos

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: LG LRSXS2706B Owner's manual
español: LG LRSXS2706B El manual del propietario