LG LK65C Manuel utilisateur

Catégorie
Frigos
Taper
Manuel utilisateur
MANUAL DE USUARIO
QUINA DE HIELO
Lea cuidadosamente este manual de usuario antes
de poner en funcionamiento su máquina de hielo,
y téngalo a la mano de referencia en todo momento.
ESPAÑOL
MFL69347701-2
2
TABLE OF CONTENTS
Warranty
Before Beginning
Replacing the Icemaker
Introduction to the Automatic Icemaker
Contents of Kit
Installing the Icemaker
Installing the Water Valve
Maintenance
Troubleshooting Guide
3
4
5
6
7
8 - 9
10 - 11
12
13
Important Safety Instructions
4
IMPORTANT SAFETY INSTRUCTIONS
This guide contains many important safety messages. Always read and obey.
This is the safety alert symbol. It alerts you to safety messages that
inform you of hazards that can kill or hurt you or others, or cause
damage to the product. All safety messages will be preceded by the
safety alert symbol and the hazard signal word DANGER,
WARNING, or CAUTION. These words mean:
You will be killed or seriously injured if you do not follow
instructions.
You can be killed or seriously injured if you do not follow
Indicates an imminently hazardous situation which, if not
avoided, may result
damage only.
in minor or moderate injury, or product
All safety messages will identify the hazard, tell you how to reduce the chance of
injury and tell you what can happen if the instructions are not followed.
WARNING
IMPORTANT: Please read carefully all instructions before using.
To reduce the risk of fire, electric
shock or injury to persons when
using your product, basic safety
precautions should be followed,
including the following. Read all
instructions before using this
appliance:
pulling on the power cord. Always grip
the plug firmly and pull it straight out
from the outlet.
When moving your refrigerator away
from the wall, be careful not to roll over
or damage the power cord in any way.
• Do not crush or damage the water
line.
Keep fingers out of ‘pinch point’ areas;
clearances between the doors and
cabinet are necessarily small. Be
careful when you open the doors when
children are in the area.
• Unplug your refrigerator before
cleaning or making any repairs.
NEVER unplug your refrigerator by
NOTE: We strongly recommend that
any servicing be performed by a
qualified individual.
•The refrigerator-freezer should be
positioned so that the power supply
plug is accessible for quick
disconnection if an accident happens.
For personal safety, this appliance
must be properly grounded. Have the
wall outlet and the circuit checked
by a qualified electrician to make sure
the outlet is properly grounded.
For refrigerators with an automatic
icemaker, avoid contact with the
moving parts of the ejector
mechanism and with the heating
element that releases the cubes.
DO NOT place fingers or hands on
the automatic ice making mechanism
while the refrigerator is plugged in.
instructions.
SAVE THESE INSTRUCTIONS
3
DANGER
WARNING
CAUTION
Replacing the Icemaker
Read these instructions completely and carefully.
IMPORTANT : Save these instructions for local servicer’s use.
IMPORTANT: ordinances.Observe all governing codes and
Note to installer: Be sure to leave these instructions with the consumer.
Note to consumer: Keep these instructions for future reference.
Skill level: mechanical and electrical Installation of this appliance requires basic
skills.
Completion time: 20~60 minutes
Proper installation is the responsibility of the installer.
Product failure due to improper installation is not covered under the warranty.
BEFORE BEGINNING
Use the water valve that comes with this kit, even if the refrigerator already has
one installed.
The other valve will not allow enough water through to properly fill the icemaker,
resulting in damage to the product.
4
Feeler Arm
Switch
Icemaker
Personal Injury Hazard
Avoid contact with the moving parts.
DO NOT place fingers or hands on the automatic
icemaking mechanism while the refrigerator
is plugged in.
WARNING
A newly installed refrigerator may take 12 to 24 hours to begin making ice.
The icemaker will produce 12 cubes per cycle, approximately 80 - 100 cubes in a
24 hour period, depending on freezer compartment temperature, room
temperature, how frequently refrigerator doors are opened, and other use
conditions.
If you wish to operate the refrigerator without connecting a water supply, set the
icemaker switch to O (off).
When the refrigerator has been connected to the water supply, set the
switch to I (on).
The icemaker will fill with water when it reaches the proper temperature. A newly
installed refrigerator may take 12 to 24 hours to begin making ice cubes.
Discard the first few batches of ice to allow the water line to clear.
Be sure nothing interferes with the movement of the feeler arm.
When the bin fills to the level of the feeler arm, the icemaker will stop producing ice.
If ice is not used frequently, old ice cubes will become cloudy, taste stale and shrink.
5
INTRODUCTION TO THE AUTOMATIC ICEMAKER
CONTENTS OF KIT
1
3
2
5
7
4
Water
Valve Assembly
6
Icemaker Owner’s Manual
Icemaker Screw 2 EA
Holder 1 EA
Icemaker
Duct Screw 2 EA
Holders Screw 1 EA /
Screw 2 EA
6
OWNER’S MANUAL
ICEMAKER
Please read this manual carefully before operating
www.lg.com
P/NO.MFL63725902
ENGLISH
ES
P
AÑOL
FRANÇAIS
MANUAL DE USUARIO
FÁBRICA DE HIELO
Lea detenidamente este manual antes de
MANUEL D 'UTILISATEUR
MACHINE À GLAÇONS
Veuillez lire ce manuel en entier avant de mettre
your set and retain it for future reference.
empezar a utilizar el refrigerador y gúardelo
como referencia para el futuro.
la main pour consulter à tout moment.
en marche lunite et conservez-le à la portée de'
(0.55 in WHITE)
(0.31 in WHITE)
8
Valve Screw 1 EA
9
Ice Bucket
Icemaker Duct
Use on models: GB-66*, GF22B*,
GM-65*, GM-B2*, LBN22*,LDN22*
LDNS2*, LFNS2*.
10
Icemaker Duct
Use on models: LFC24*
11
BEFORE BEGINNING
Read each step thoroughly before proceeding.
Slide the upper drawer forward until the stops
line up with the gaps in the molded upper drawer
supports. Lift the front of the upper drawer up and
pull the upper drawer out.
REQUIRED TOOLS
1. REMOVE UPPER DRAWER
CAUTION: Unplug the refrigerator power cord from the outlet.
Flat blade and
Phillips screwdriver
7
2. REMOVE LOWER DRAWER
4. REMOVE ICEMAKER COVER
INSTALLING THE ICEMAKER
3. INSTALL ICEMAKER DUCT
Fasten the icemaker duct (10 or 11) to the
fan grille using the two Phillips screws (2).
d
the freezer section on the left side of the
2
11
10
INSTALLING THE ICEMAKER
7. INSTALL ICEMAKER
6. PLUG IN ICEMAKER
Turn the icemaker (1) switch to
Leave the icemaker off until the refrigerator
is connected to the water supply to prevent
premature operation.
5. TURN OFF ICEMAKER
Plug the icemaker wire harness into the
connector located in the freezer ceiling until
it clicks.
NOTE: Make sure the connection is secure.
To mount the icemaker, place the two tabs
located on the back of the icemaker into the
slots located in the freezer ceiling.
Secure the front of the icemaker to the freezer
ceiling using the two Phillips (5) screws.
8
Install the upper drawer in the lowest position.
Put the ice bucket (9) directly under the
icemaker (to the left and all the way to the
rear of the upper drawer under the icemaker).
Make sure the icemaker switch is
set to
position.
8. INSTALL UPPER DRAWER AND
ICE BUCKET
Switch
9. KEEP THIS MANUAL
Switch
5
9
Keep this manual with your refrigerator’s
owner’s manual. The icemaker installation
inside the freezer is now complete.
Continue to the water valve installation section.
NOTE : The drawer is
designed to keep the
ice bucket in the
correct position.
Back
Front
1
9
INSTALLING THE WATER VALVE
1
BEFORE BEGINNING
. REMOVE BACK COVER
2. CONNECT WATER VALVE WIRE HARNESS
Read each step thoroughly before proceeding.
REQUIRED TOOLS
CAUTION: Unplug the refrigerator power cord from the outlet.
Facing the back of the
refrigerator, locate the wiring
harness for the water valve (6) at
the lower right side. Plug the
connector of the
water valve
harness onto the refrigerator
terminals.
Remove the back cover using
a Phillips screwdriver.
Flat blade and
Phillips screwdriver
3. ATTACH WATER VALVE
Fasten the water valve to
the back of the
refrigerator using one
Phillips scr ).
NOTE: Make sure the fill tube
connection on water valve is secure.
8
8
6
10
WATER VALVE INSTALLATION
4. REMOVE ICEMAKER FILL TUBE COVER
5. INSTALL FILL TUBE COVER
Install the fill tube cover
to the back of the refrigerator using
the two Phillips sc
rews (4) to hold the
fill tube in place.
Remove and discard the icemaker fill tube
opening cover located on the lower right
side of the refrigerator; insert the icemaker
fill tube all the way into the opening until
it stops.
6. SECURE FILL TUBE
Locate the mark on the back of the cabinet where
the fill tube will be installed. Place the screw on the
mark and tap it with the screwdriver to make
a small hole. Fasten the fill tube using the holder
pipe (7) and the Phillips screw (4).
7. ATTACH BACK COVER
Replace and fasten the back cover with
the previously removed screws.
8. WATER VALVE INSTALLED
To connect to the home water supply, refer to the water line installation
instructions in the refrigerator's owner's manual.
Once the home water supply line is connected and turned on, turn the icemaker
switch to the I (on) position.
The icemaker requires 12 to 24 hours to produce ice.
Discard the first few batches of ice to purge the line of any impurities.
4
7
4
11
TURN THE ICEMAKER TO O (OFF)
NORMAL SOUNDS YOU MAY HEAR
VACATION SETTINGS
MAINTENANCE
During use, you may hear an occasional "buzzing" noise coming from the back
of the refrigerator. This is normal and occurs when the water valve is turned on
to allow water to fill the ice tray. If this noise occurs and the refrigerator is not
connected to a water supply, avoid damaging the icemaker, set the icemaker
switch to the O (off) position.
You may occasionally hear the sound of ice dropping into the ice bin, and running
water during use as the icemaker refills.
Set the icemaker switch to the O (off) position, and shut off the water
to the refrigerator.
If you anticipate that the temperature surrounding the refrigerator may drop below
freezing, have a qualified plumber drain the water supply system to prevent
property damage due to flooding from ruptured water lines or connections.
supply line
When the ice storage bin is removed for more than a few minutes.
When the refrigerator will not be used for several days.
When the water supply will be shut off for several hours.
AUTOMATIC ICEMAKER DOES NOT WORK
CUBES PRODUCED BY ICEMAKER ARE TOO SMALL
ICE CUBES ARE FREEZING TOO SLOWLY
ICE CUBES HAVE A BAD TASTE OR ODOR
Icemaker switch in the O (off)
position.
Water supply turned off or not connected.
Freezer compartment too warm.
Piled up cubes in the storage bin causes
the icemaker to shut off.
The doors have been left open.
Temperature control not set cold enough.
Ice storage bin needs cleaning.
Food transmitting odor/taste to ice cubes.
Interior of refrigerator needs cleaning.
Water supply connection is not fully open or the
water supply pressure is not adequate.
TROUBLESHOOTING GUIDE
Move the switch to the I (on) position.
Check water line connection.
After installing icemaker, wait 24 hours for
freezer to reach its set temperature.
Level cubes by hand.
Check water supply for proper pressure.
Check to ensure doors are closed properly.
Refer to refrigerator’s owner's manual
for information on temperature
adjustments.
Empty and thoroughly wash the ice bin.
Cover or wrap food items to prevent the
Refer to refrigerator’s Owner’s Manual
to the Care and Cleaning section
Possible Cause Solution
Possible Cause
Solution
Possible Cause Solution
Possible Cause Solution
Recommended pressures are 20 -120 psi
(138 - 827 kPa).
Recommended freezer temperature is
0°F (-18°C).
see General Cleaning Tips.
spread of odors.
12
13
WARRANTY
LG ELECTRONICS CANADA, INC.
LG REFRIGERATOR LIMITED WARRANTY - Canada
ninety (90) days from the date of manufacture of the ice maker).
THIS LIMITED WARRANTY DOES NOT COVER:
All costs associated with the above excluded circumstances shall be borne by the consumer.
For complete warranty details and customer assistance,
please call or visit our website:
Call 1-888-542-2623 (24 hours a day, 365 days a year) and
select the appropriate option from the menu or visit our
website at http://www.lg.com
Model:
Serial Number:
Date of Purchase:
WARRANTY PERIOD: (Note: If the original date of purchase can not be verified, the warranty will begin
LG Icemaker Kit Warranty Period
Product Parts Labor
Icemaker Kit 1 year 1 year [In-Home Service]
WARRANTY: Should your LG Ice Maker Kit (“Product”) fail due to a defect in material or workmanship under normal home use during the
warranty period set forth below, LG Canada will at it’s option repair or replace the Product upon receipt of proof of original retail purchase.
This warranty is valid only to the original retail purchaser of the product and applies only to a Product distributed in Canada by LG Canada or an
authorized Canadian distributor. The warranty only applies to Products located and used within Canada.
* Replacement products and parts are warranted for the remaining portion of the original warranty period or ninety (90) days, whichever is
greater.
* Replacement products and parts may be new or remanufactured.
* LG Authorized Service Center warranties their repair work for thirty (30) days.
LG CANADA´S SOLE LIABILITY IS LIMITED TO THE WARRANTY SET OUT ABOVE, EXCEPT AS EXPRESSLY PROVIDED
ABOVE, LG CANADA MAKES NO AND HEREBY DISCLAIMS ALL OTHER WARRANTIES AND CONDITIONS RESPECTING THE PRODUCT,
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILIT
Y OR
FITNESS FOR A PARTICULAR PURPOSE AND NO REPRESENTATIONS SHALL BE BINDING ON LG CANADA. LG CANADA DOES NOT
AUTHORIZE ANY PERSON TO CREATE OR ASSUME FOR IT ANY OTHER WARRANTY OBLIGATION OR LIABILITY IN CONNECTION WITH
THE PRODUCT. TO THE EXTENT THAT ANY WARRANTY OR CONDITION IS IMPLIED BY LAW, IT IS LIMITED TO THE EXPRESS WARRANTY
PERIOD ABOVE. LG CANADA, THE MANUFACTURER OR DISTRIBUTOR SHALL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL,
SPECIAL, DIRECT OR INDIRECT DAMAGES, LOSS OF GOODWILL, LOST PROFITS, PUNITIVE OR EXEMPLARY DAMAGES OR ANY OTHER
DAMAGE, WHETHER ARISING DIRECTLY OR INDIRECTLY FROM ANY CONTRACTUAL BREACH, FUNDAMENTAL OR OTHERWISE, OR FROM
ANY ACTS OR OMISSIONS, TORT, OR OTHERWISE.
This warranty gives you specific legal rights. You may have other rights which may vary from province to province depending on applicable
provincial laws. Any term of this warranty that negates or varies any implied condition or warranty under provincial law is severable where it
conflicts with provincial law without affecting the remainder of this warranty’s terms.
1. Service trips to deliver
, pick up, or install the product; instructing a customer on operation of the product; repair or replacement of fuses or
correction of wiring, or correction of unauthorized repairs/installation.
2. Failure of the product to perform during power failures and interruptions or inadequate electrical service.
3. Damage caused by leaky or broken water pipes, frozen water pipes, restricted drain lines, inadequate or interrupted water supply or inadequate
supply of air.
4. Damage resulting from operating the Product in a corrosive atmosphere or contrary to the instructions outlined in the Product owner’s manual.
5. Damage to the Product caused by accidents, pests and vermin, lightning, wind, fire, floods, or acts of God.
6. Damage resulting from the misuse, abuse, improper installation, repair, or maintenance of the Product. Improper repair includes use of parts
not approved or specified by LG Canada.
7. Damage or product failure caused by unauthorized modification or alteration, or use for other than it’s inteded purpose, or resulting from any
water leakage due to improper installation.
8. Damage or Product f
ailure caused by incorrect electrical current, voltage, commercial or industrial use, or use of accessories, components, or
cleaning products that are not approved by LG Canada.
9. Damage caused by transportation and handling, including scratches, dents, chips, and/or other damage to the finish of your product, unless
such damage results from defects in materials or workmanship and is reported within one (1) week of delivery.
10. Damage or missing items to any display, open box, discounted, or refurbished Product.
11. Products with original serial numbers that have been removed, altered, or cannot be readily determined. Model and Serial numbers, along with
original retail sales receipt, are required for warranty validation.
12. Increases in utility costs and additional utility expenses.
13. Replacement of consumable parts.
14. Repairs when your Product is used in other than normal and usual household use (including, without limitation, commercial use, in offices or
recreational facilities) or contrary to the instructions outlined in the Product owner’s manual.
15. Costs associated with removal of the Product from your home for r
epairs.
16. The removal and reinstallation of the Product if it is installed in an inaccessible location or is not installed in accordance with published
installation instructions, including the Product owner’s and installation manuals.
17. Accessories to the Product such as door bins, drawers, handles, shelves, etc. Also excluded are parts besides those that were originally included
with the Product.
Write your warranty information below:
Product Registration Information:
TABLE DES MATIERES
Garantie
Avant de commencer
Remplacer la machine à glaçons
Introduction à la Machine à Glaçons
automatique
Contenu du Kit
Installation de la Machine à Glaçons
Installation du système d'arrivée d'eau
Entretien
Guide de résolution des problèmes
15
16
17
18
19 - 20
21 - 22
23
25
24
14
Consignes de sécurité importantes
16
IMPORTANT: Veuillez lire toutes les instructions avant d'utiliser l'appareil.
CONSIGNES DE SÉCURITÉ IMPORTANTES
AVERTISSEMENT
Risque de blessures ou de mort si les graves
Risque de blessures graves ou de mort si les
Risque imminent qui peut causer des dommages
Tous les messages de sécurité identifient les risques de blessure ou
DANGER
AVERTISSEMENT
ATTENTION
instructions ne sont pas suivies . correctement
instructions ne sont pas suivies correctement.
au produit ou des blessures mineures.
d'endommagement du produit si les instructions ne sont pas suivies correctement,
Veuillez lire et respecter les messages de sécurités inclus dans ce guide.
Symbole d'alerte. Il indique un message de sécurité concernant les
risques relatifs à l'endommagement du produit, aux blessures ou à la
mort. Tous les messages de sécurité sont dotés de ce symbole et
d'un (DANGER, AVERTISSEMENT, ATTENTION). mot
et la manière de les réduire.
choc électrique ou de blessure au
Ne jamais débrancher le réfrigérateur
Pour réduire le risque d'incendie, de
moment d'utiliser ce produit, il faut
en tirant sur le cordon d'alimentation.
Toujours saisir fermement la fiche et
Au moment de déplacer le
ne pas endommager le cordon
suivre les précautions de base:
tirer de la prise.
réfrigérateur du mur, faire attention à
d'alimentation.
Eloigner les doigts des zones de
pincement: le dégagement entre les
portes et le boîtier est mince. Faire
attention en fermant les portes si des
enfants sont à proximité.
Débrancher le réfrigérateur avant le
nettoyage ou toute réparation.
REMARQUE: Il est recommandable
que tout service de nettoyage soit
effectué par un technicien qualifié.
Pour la sécurité cet appareil doit être
mis à la terre de façon adéquate. Faire
vérifier la prise murale et le circuit par un
électricien qualifié afin de s'assurer que
la prise est correctement mise à la terre.
Pour les réfrigérateurs dotés d'une
machine à glaçons automatique, éviter
tout contact avec les pièces mobiles du
mécanisme de distribution ou avec les
éléments chauffants. Ne pas placer les
doigts ou les mains sur le mécanisme
fabrication de glaçons lorsque le
réfrigérateur est branché.
GARDEZ CES INSTRUCTIONS
N'aplatissez pas ou abîmez à la ligne
de l'eau.
Le réfrigérateur - congélateur est doit
positionné de façon à ce que sa
déconnexion puisse être rapide en cas
d'un accident.
15
Remplacement de la Machine à glaçons
Lire attentivement la totalité de cette notice avant la première utilisation.
Utilisez le robinet d'eau qui vient avec ce kit, même si le réfrigérateur a déjà un
installé.
L'autre vanne ne permettra pas assez d'eau pour remplir correctement grâce à
la machine à glaçons, entraînant des dommages au produit.
AVANT DE COMMENCER
IMPORTANT: Garder ce manuel pour le réparateur/servie d'entretien local.
IMPORTANT: Respectez les codes et normes en vigueur.
À l'intention de l'installateur: Assurez vous de donner ces instructions au
À l'intention du consommateur : Conservez ces instructions.
Niveau de compétence requis: Des connaissances minimums et basiques en
mécanique et électricité son requises pour
Temps d'installation: 20~60 minutes
Le fabricant ne saurait être tenu pour responsable de la mauvaise utilisation de
Toute panne de l'appareil due a une utilisation inadéquate n'est pas couverte
par la garantie.
consommateur.
l'installation de cet appareil.
cet appareil.
16
INTRODUCTION À LA MACHINE À GLAÇONS AUTOMATIQUE
AVERTISSEMENT
Risque de blessure
Éviter de toucher les parties mobiles.
NE PAS introduire les doigts ou
mécanismes de la machine pendant que le
réfrigérateur est branché.
les mains sur les
Un réfrigérateur installé récemment nécessite un délais de 12 à 24 heures
avant de faire de la glace.
La machine à glaçons produit 12 glaçons par cycle, et de 80 a 100 glaçons sur
une période de 24 heures. La quantité de glaçons produits peut varier en fonction
de la température du compartiment à glaçons, de la température ambiante, de la
fréquence d'ouverture des portes du réfrigérateur et d'autres conditions d'utilisation.
Si vous préférez ne pas connecter le réfrigérateur à une arrivé d'eau, veillez
positionner l'interrupteur en position O (off) éteint.
Une fois le réfrigérateur connecté a une arrivée d'eau, placer l'interrupteur en
position (on) allumer.
La machine à glaçons se remplira une fois la température appropriée atteinte Un
réfrigérateur installé récemment nécessite un délais de 12 à 24 heures avant de
faire de la glace.
Les premiers lots de glaçon afin que la conduite d'eau se nettoie.
S'assurer que rien ne gêne le mouvement du bras d'entra nement.
Une fois le bac à glaçons rempli au niveau du bras d'entra nement, La machine à
glaçons arrêtera de produire de la glace.
Si les glaçons ne sont pas fréquemment utilisés, ils pourraient se troubler et
rétrécir, et avoir un goût rance.
I
î
î
Interrupteur
Machine à glaçons
î tnemenartne'd sarB
17
CONTENU DU KIT
18
7
6
4
8
5
Vis pour machine
à glaçons
1
2
3
OWNER’S MANUAL
ICEMAKER
Please read this manual carefully before operating
www.lg.com
P/NO.MFL63725902
ENGLISH
ES
P
AÑOL
FRANÇAIS
MANUAL DE USUARIO
FÁBRICA DE HIELO
Lea detenidamente este manual antes de
MANUEL D 'UTILISATEUR
MACHINE À GLAÇONS
Veuillez lire ce manuel en entier avant de mettre
your set and retain it for future reference.
empezar a utilizar el refrigerador y gúardelo
como referencia para el futuro.
la main pour consulter à tout moment.
en marche lunite et conservez-le à la portée de'
2 EA (14 mm BLANC)
(8mm BLANC)
Machine à glaçons
Manuel d´ Utilisateur
de Machine à Glaçons
Vis du distributeur 2 EA
Vis des supports 1 EA /
Vis de cache 2 EA
Support 1 EA
9
Bac à glaçon
Vis de la durite d'eau 1 EA
Ensemble de la durite d'eau
10
Conduit du machine à glaçons
Utilisez les modèles: GB-66*, GF22B*,
GM-65*, GM-B2*, LBN22*,LDN22*
LDNS2*, LFNS2*.
11
Conduit du machine à glaçons
Utilisez les modèles: LFC24*
AVANT DE COMMENCER
Lire attentivement les instructions avant de procéder à l'installation.
OUTILS NÉCESSAIRES
1. RETIRER LE PLUS HAUT TIROIR
2. RETIRER LE TIROIR
INSTALLATION DE LA MACHINE À GLAÇONS
ATTENTION: Débrancher la prise murale du réfrigérateur
Faites glisser le tiroir vers l’avant jusqu'à ce
que les buttées soient alignées par rapport
aux creux des supports de tiroir moulés.
Soulevez l'avant du tiroir et retirez-le.
Pour retirer le tiroir, tirez-le complétement
puis relevez l’avant et soulevez le tiroir
directement.
avant de commencer.
19
4. RETIRER LE CACHE DE LA
MACHINE À GLAÇONS
Retirer et jeter le cache de la machine à
glaçons, situé dans la partie congélateur sur
le côté gauche de la paroi supérieure, en
utilisant un tournevis cruciforme.
Tournevis plats
et cruciformes
3. INSTALLER DU CONDUIT
DU MACHINE À GLAÇONS.
Fixez le conduit du machine à glaçon (10
ou 11) à la grille du ventilateur en utilisant
les deux vis Phillips (2).
10
11
2
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

LG LK65C Manuel utilisateur

Catégorie
Frigos
Taper
Manuel utilisateur

dans d''autres langues