LG 60UH6550 Le manuel du propriétaire

OWNER’S MANUAL

Safety and Reference

LED TV*

* LG LED TVs are LCD TVs with LED backlighting.

P/No : MFL69272403 (1601-REV00)

www.lg.com

*MFL69272403*

Please read this manual carefully before operating your TV and

retain it for future reference.

43UH6500

49UH6500

55UH6550

60UH6550

65UH6550

75UH6550

43UH7500

49UH7500

55UH7500

60UH7500

65UH7500

49UH7700

55UH7700

60UH7700

65UH7700

55UH8500

60UH8500

65UH8500

75UH8500

55UH9500

65UH9500

86UH9500

98UH9800

50UH5500

65UH5500

49UH610A

55UH615A

60UH615A

65UH615A

43UH6100

49UH6100

55UH6150

60UH6150

65UH6150

40UH6300

50UH6300

58UH6300

70UH6350

2

ENGLISH

Important Safety Instructions

Always comply with the following precautions

to avoid dangerous situations and ensure peak

performance of your product.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the presence of

uninsulated dangerous voltage within the

product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock

to persons.

The exclamation point within an

equilateral triangle is intended to alert the

user to the presence of important operating

and maintenance (servicing) instructions in the

literature accompanying the device.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC

SHOCK, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may

be seriously injured or there is a possibility of

accident or death.

CAUTION

If you ignore the caution message, you may

be slightly injured or the product may be

damaged.

NOTE

The note helps you understand and use the

product safely. Please read the note carefully

before using the product.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

• Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

• Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding type plug has two blades

and a third grounding prong. The wide blade or

the third prong are provided for your safety. If

the provided plug does not fit into your outlet,

consult an electrician for replacement of the

obsolete outlet.

• Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

• Only use attachments/accessories specified by

the manufacturer.

• Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

3

ENGLISH

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

• Unplug this apparatus during lightning storms or

when unused for long periods of time.

• Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not

operate normally, or has been dropped.

• Do not press strongly upon the panel with a hand

or a sharp object such as a nail, pencil, or pen, or

make a scratch on it.

• Do not stick metal objects or any other conductive

material into the power cord. Do not touch the end

of the power cord while it is plugged in.

• Keep the packing anti-moisture material or vinyl

packing out of the reach of children. Anti-moisture

material is harmful if swallowed. If swallowed,

induce vomiting and go to the nearest hospital.

Additionally, vinyl packing can cause suffocation.

Keep it out of the reach of children.

• CAUTION concerning the Power Cord

(Can differ by country):

Check the specification page of this owner’s

manual to be certain concerning current

requirements. Do not connect too many devices

to the same AC power outlet as this could result in

fire or electric shock. Do not overload wall outlets.

Overloaded wall outlets, loose or damaged wall

outlets, extension cords, frayed power cords, or

damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric

shock or fire. Periodically examine the cord of your

device, and if its appearance indicates damage

or deterioration, unplug it, discontinue use of the

device, and have the cord replaced with an exact

replacement part by an authorized servicer. Protect

the power cord from physical or mechanical abuse,

such as being twisted, kinked, pinched, closed in

a door, or walked upon. Pay particular attention

to plugs, wall outlets, and the point where the

cord exits the device. Do not move the TV with the

power cord plugged in. Do not use a damaged or

loose power cord. Be sure do grasp the plug when

unplugging the power cord. Do not pull on the

power cord to unplug the TV.

• Warning - To reduce the risk of fire or electrical

shock, do not expose this product to rain, moisture

or other liquids. Do not touch the TV with wet

hands. Do not install this product near flammable

objects such as gasoline or candles, or expose the

TV to direct air conditioning.

• Do not expose to dripping or splashing and do

not place objects filled with liquids, such as vases,

cups, etc. on or over the apparatus (e.g., on shelves

above the unit).

4

ENGLISH

• Grounding

- (Except for devices which are not grounded.)

Ensure that you connect the earth ground wire

to prevent possible electric shock (i.e., a TV

with a three-prong grounded AC plug must

be connected to a three-prong grounded AC

outlet).

If grounding methods are not possible, have

a qualified electrician install a separate circuit

breaker. Do not try to ground the unit by

connecting it to telephone wires, lightning

rods, or gas pipes.

Circuit

Breaker

Power

Supply

• As long as this unit is connected to the AC wall

outlet, it is not disconnected from the AC power

source even if the unit is turned off.

• Do not attempt to modify this product in any

way without written authorization from LG

Electronics. Unauthorized modification could

void the user’s authority to operate this product.

• Outdoor Antenna Grounding

- (Can differ by country):

If an outdoor antenna is installed, follow

the precautions below. An outdoor antenna

system should not be located in the vicinity of

overhead power lines or other electric light or

power circuits, or where it can come in contact

with such power lines or circuits as death or

serious injury can occur. Be sure the antenna

system is grounded to provide some protection

against voltage surges and built-up static

charges. Section 810 of the National Electrical

Code (NEC) in the U.S.A. provides information

with respect to proper grounding of the mast

and supporting structure, grounding of the

lead-in wire to an antenna discharge unit, size

of grounding conductors, location of antenna

discharge unit, connection to grounding

electrodes, and requirements for the grounding

electrode.

Antenna grounding according to the National

Electrical Code, ANSI/NFPA 70

Ground Clamp

Grounding Conductor

(NEC Section 810-21)

Antenna Lead in Wire

Electric Service

Equipment

Antenna Discharge Unit

(NEC Section 810-20)

Ground Clamp

Power Service Grounding

Electrode System

(NEC Art 250, Part H)

NEC: National Electrical Code

• Cleaning

- When cleaning, unplug the power cord and

wipe gently with a soft cloth to prevent

scratching. Do not spray water or other liquids

directly on the TV as electric shock may occur.

Do not clean with chemicals such as alcohol,

thinners, or benzene.

• Moving

- Make sure the product is turned off, unplugged,

and all cables have been removed. It may take 2

or more people to carry larger TVs. Do not press

or put stress on the front panel of the TV.

• Ventilation

- Install your TV where there is proper ventilation.

Do not install in a confined space such as a

bookcase. Do not cover the product with cloth

or other materials while plugged in. Do not

install in excessively dusty places.

• If you smell smoke or other odors coming from

the TV, unplug the power cord and contact an

authorized service center.

• Keep the product away from direct sunlight.

• Never touch this apparatus or antenna during a

lightning storm.

• When mounting a TV on the wall, make sure not

to install the TV by hanging the power and signal

cables on the back of the TV.

• Do not allow an impact shock or any objects to

fall into the product, and do not drop anything

onto the screen.

• DISCONNECTING THE DEVICE FROM THE MAIN

POWER

The power plug is the disconnecting device.

In case of an emergency, the power plug must

remain readily accessible.

• Make sure the power cord is connected securely

to the power plug on the TV.

• Batteries

- Store the accessories (battery, etc.) in a safe

location out of the reach of children.

• This apparatus uses batteries. In your community

there might be regulations that require you

to dispose of these batteries properly due to

environmental considerations. Please contact

your local authorities for disposal or recycling

information.

• Do not dispose of batteries in a fire.

• Do not short circuit, disassemble, or allow the

batteries to overheat.

5

ENGLISH

• Do not use high voltage electrical equipment

near the TV, (e.g., a bug zapper).

This may result in product malfunction.

• Dot Defect

- The panel is a high technology product with

resolution of two million to six million pixels. In

a very few cases, you could see fine dots on the

screen while you’re viewing the TV. Those dots

are deactivated pixels and do not affect the

performance and reliability of the TV.

• Generated Sound

- Cracking noise A cracking noise that occurs

when watching or turning off the TV is

generated by plastic thermal contraction

due to temperature and humidity. This noise

is common for products where thermal

deformation is required.

- Electrical circuit humming/panel buzzing

A low level noise is generated from a high-

speed switching circuit, which supplies a

large amount of current to operate a product.

It varies depending upon the product.

This generated sound does not affect the

performance and reliability of the product.

• Take care not to touch the ventilation openings.

When watching the TV for a long period, the

ventilation openings may become hot. This does

not affect the performance of the product or

cause defects in the product.

• Do not install this product on a wall if it could be

exposed to oil or oil mist. This may damage the

product and cause it to fall.

• If the TV feels cold to the touch, there may

be a small flicker when it is turned on. This is

normal; there is nothing wrong with TV. Some

minute dot defects may be visible on the screen,

appearing as tiny red, green, or blue spots.

However, they have no adverse effect on the TV’s

performance. Avoid touching the LCD screen or

holding your finger(s) against it for long periods

of time. Doing so may produce some temporary

distortion effects on the screen.

• Displaying a still image for a prolonged time may

cause image sticking. Avoid displaying a fixed

image on the TV screen for a long period of time.

Viewing 3D Imaging

(For 3D models)

CAUTION

• Guardians should not leave children

unsupervised who are watching a 3D video.

Guardians should make children stop watching

the video and take a rest if they experience eye

fatigue, headache, or dizziness.

• When viewing a 3D video, some may experience

discomfort such as a headache, dizziness,

fatigue, or blurred vision. In this case, stop

watching the 3D video and take a rest.

• If you watch a 3D video for a long time, you

may experience eye fatigue. In this case, stop

watching the 3D video and take a rest.

• Only use LG 3D glasses. Otherwise, you may not

be able to view 3D videos properly.

• Do not use 3D glasses instead of your normal

glasses, sunglasses, or protective goggles. Place

the 3D glasses over your normal eye ware.

• Do not keep your 3D glasses in extremely high or

low temperatures. It will cause deformation.

• Do not use the 3D glasses while walking or

moving around. It may cause an accident or

injury.

• Be careful not to poke your eye with the frames

of the 3D glasses.

• Do not watch 3D content if you have

photosensitive seizures, epilepsy, or heart

disease.

6

ENGLISH

Preparing

NOTE

• Image shown may differ from your TV.

• Your TV’s OSD (On Screen Display) may differ

slightly from that shown in this manual.

• The available menus and options may differ from

the input source or product model that you are

using.

• New features may be added to this TV in the

future.

• The items supplied with your product may vary

depending upon the model.

• Product specifications or contents of this manual

may be changed without prior notice due to

upgrade of product functions.

• For an optimal connection, HDMI cables and

USB devices should have bezels less than 10 mm

(0.39 inches) thick and 18 mm (0.7 inches) width.

• Use an extension cable that supports USB 2.0 if

the USB cable or USB flash drive does not fit into

your TV’s USB port.

• Use a certified cable with the HDMI logo

attached. If you do not use a certified HDMI

cable, the screen may not display or a

connection error may occur.

• Recommended HDMI cable types (3 m or less)

- High-Speed HDMI®/

TM

cable

- High-Speed HDMI ®/

TM

cable with Ethernet

B

A

B

*A 10 mm (0.39 inches)

*B

18 mm (0.7 inches)

• How to use the ferrite core

(Depending upon model)

- Use the ferrite core to reduce the

electromagnetic interference in the power

cable. Wind the power cable on the ferrite core

once.

[Cross Section of Ferrite Core]

[to a wall plug] [to the TV]

10 cm (+/- 2 cm)

• Antenna Isolator Installation Guide

(Depending upon model)

- Use this to install TV in a place where there is a

voltage difference between TV Set and GND of

antenna signal. If there is a voltage difference

between TV Set and GND of antenna signal, the

antenna contact might be heated and excessive

heat might cause an accident.

- You can improve the safety when watching

TV by efficiently removing power voltage

from TV antenna. It is recommended to

mount the isolator to the wall. If it cannot

be mounted to the wall, mount it on the TV.

Avoid disconnecting the antenna Isolator after

installation.

- Before starting, be sure that the TV antenna is

connected.

ANTENNA/

CABLE IN

Wall

or

Isolator

1. Connect to TV

2. Connect to Set-Top box

Cable /

Antenna

Connect one end of the isolator to cable/antenna

jack and the other to TV set or set-top box.

“Equipment connected to the protective earthing

of the building installation through the mains

connection or through other equipment with

a connection to protective earthing - and to a

cable distribution system using coaxial cable,

may in some circumstances create a fire hazard.

Connection to a cable distribution system has

therefore to be provided through a device

providing electrical isolation below a certain

frequency range (galvanic isolator, see EN 60728-

11)”

When applying the RF Isolator, a slight loss of

signal sensitivity can occur.

7

ENGLISH

CAUTION

• Do not use any unapproved items to ensure the

safety and product’s lifespan.

• Any damages or injuries by using unapproved

items are not covered by the warranty.

• Some models appear to have a thin film on the

screen. It is actually part of the screen; do not

remove it.

• When attaching the stand to the TV set, place

the screen facing down on a cushioned table or

flat surface to protect the screen from scratches.

• Make sure that the screws are fastened tightly.

(If they are not fastened securely enough, the TV

may tilt forward after being installed.)

• Do not fasten the screws with excessive force;

otherwise, they may be worn out and become

loose.

• Make sure to wring any excess water or cleaner

from the cloth.

• Do not spray water or cleaner directly onto the

TV screen.

• Make sure to spray just enough of water or

cleaner onto a dry cloth to wipe the screen.

• When cleaning the product, be careful not to

allow any liquid or foreign objects to enter the

gap between the upper, left or right side of the

panel and the guide panel. (For UH8500 series)

Optional Extras

Optional extras can be changed or modified for

quality improvement without any notification.

Contact your dealer for buying these items.

These devices work only with certain models.

The model name or design may be changed due to

the manufacturer’s circumstances or policies.

(Depending upon model)

AG-F***

Cinema 3D

Glasses

AG-F***DP

Dual Play

Glasses

AN-VC550

Smart Camera

AN-MR650

Magic Remote

Lifting and Moving the TV

When moving or lifting the TV, read the following

to prevent the TV from being scratched or

damaged and for safe transportation regardless of

its type and size.

• It is recommended to move the TV in the box or

packing material that the TV originally came in.

• Before moving or lifting the TV, disconnect the

power cord and all cables.

• When holding the TV, the screen

should face away from you to

avoid damage.

• Hold the top and bottom of the TV frame firmly.

Make sure not to hold the transparent part,

speaker, or speaker grille area.

• Use at least two people to move

a large TV.

• When transporting the TV by

hand, hold the TV as shown in the

following illustration.

• When transporting the TV, do not expose the TV

to jolts or excessive vibration.

• When transporting the TV, keep the TV upright;

never turn the TV on its side or tilt towards the

left or right.

• When handling the TV, be careful not to damage

the protruding buttons.

8

ENGLISH

CAUTION

• Avoid touching the screen at all times, as this

may result in damage to the screen.

• Do not place the product on the floor with its

front facing down without padding. Failure to do

so may result in damage to the screen.

• Do not move the TV by holding the cable

holders, as the cable holders may break, and

injuries and damage to the TV may occur.

(Depending upon model)

Using the Button

(Depending upon model)

You can simply operate the TV functions, pressing

or moving the button.

NOTE

• 43/49UH6100 and 49UH610A does not have

a Joystick button but has only a power On/Off

button.

(A Type)

Dome Button

Joystick Button

Or

(B Type)

Joystick Button

Basic Functions

Power On (Press)

Power Off (Press and Hold)

1

Volume Control

Channels Control

1 All running apps will close.

Adjusting the Menu

When the TV is turned on, press button one time.

You can adjust the Menu items pressing or moving

the buttons.

Turns the power off.

Accesses the setting menu.

Clears on-screen displays and returns to TV

viewing.

Changes the input source.

Mounting on a Table

1 Lift and tilt the TV into its upright position on a

table.

- Leave a 10 cm (4 inches) (minimum) space from

the wall for proper ventilation.

10 cm

(4 inches)

9

ENGLISH

2 Connect the power cord to a wall outlet.

CAUTION

• Do not place the TV near or on sources of heat,

as this may result in fire or other damage.

Securing the TV to a Wall

(optional)

(Depending upon model)

1 Insert and tighten the eye-bolts, or TV brackets

and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts

position, remove the bolts first.

2 Mount the wall brackets with the bolts to the

wall. Match the location of the wall bracket and

the eye-bolts on the rear of the TV.

3 Connect the eye-bolts and wall brackets tightly

with a sturdy rope or cable. Make sure to keep

the rope parallel to the flat surface.

CAUTION

• Make sure that children do not climb on or hang

on the TV.

NOTE

• Use a platform or cabinet that is strong and large

enough to support the TV securely.

• Brackets, bolts, and ropes are optional. You can

obtain additional accessories from your local

dealer.

Mounting on a Wall

An optional wall mount can be used with your

LG Television. Consult with your local dealer for

a wall mount that supports the VESA standard

used by your TV model. Carefully attach the wall

mount bracket at the rear of the TV. Install the wall

mount bracket on a solid wall perpendicular to the

floor. If you are attaching the TV to other building

materials, please contact qualified personnel to

install the wall mount. Detailed instructions will

be included with the wall mount. We recommend

that you use an LG brand wall mount. The LG wall

mount is easy to adjust or to connect the cables.

When you do not use LG’s wall mount bracket,

use a wall mount bracket where the device is

adequately secured to the wall with enough space

to allow connectivity to external devices. If you are

using a non-adjustable mount, attach the mount

to the wall. Attach the cables to the TV first, then

attach the TV to the mount.

10 cm

(4 inches)

Make sure to use screws and wall mounts that

meet the VESA standard. Standard dimensions for

the wall mount kits are described in the following

table.

10

ENGLISH

Model 49UH610A

55UH615A

49UH6100

55UH6150

49UH6500

55UH6550

40/50UH6300

49/55UH7500

49/55UH7700

55UH8500

50UH5500

65UH5500

58UH6300

60/65UH615A

60/65UH6150

60/65UH6550

60/65UH7500

60/65UH7700

60/65UH8500

VESA (A x B) 300 x 300 300 x 300

Standard screw M6 M6

Number of

screws

4 4

Wall mount

bracket

(optional)

LSW350B

MSW240

LSW350B

Model 43UH6100

43UH6500

43UH7500

75UH6550

75UH8500

86UH9500

98UH9800

70UH6350

VESA (A x B) 200 x 200 600 x 400

Standard screw M6 M8

Number of

screws

4 4

Wall mount

bracket

(optional)

LSW240B

MSW240

LSW640B

Model 55/65UH9500

VESA (A x B) 300 x 200

Standard screw M6

Number of

screws

4

Wall mount

bracket

(optional)

OTW420B

A

B

CAUTION

• Remove the stand before installing the TV on a

wall mount by performing the stand attachment

in reverse.

NOTE

• When using the wall mount, it is recommended

that you apply a piece of tape over the 2 Pole

Stand holes to prevent dust and bugs from

entering the holes. (Depending upon model)

2 Pole Stand Hole

• When using the wall mounting bracket, apply

the adhesive protective label or protective cover

to cover the unused stand openings. This will

prevent the accumulation of dust and dirt. (Use

only when provided with your particular model.)

Provided Item

Adhesive Protective

Label

Provided Item

Adhesive Protective

Label

Provided Item

Protective Cover

• Depending upon the shape of the stand, use a

flat tool to remove the stand cover as illustrated

below. (e.g., a flat screwdriver)

11

ENGLISH

Connections (Notifications)

You can connect various external devices to the TV.

Supported external devices are: HD receivers, DVD

players, VCRs, audio systems, USB storage devices,

PC, gaming devices, and other external devices.

For more information on an external device’s

connection, refer to the manual provided with

each device.

NOTE

• If you record a TV program on a DVD recorder or

VCR, make sure to connect the TV signal input

cable to the TV through a DVD recorder or VCR.

For more information about recording, refer to

the manual provided with the connected device.

• The external device connections shown may

differ slightly from illustrations in a manual.

• Connect external devices to the TV regardless

about the order of the TV port.

• If you connect a gaming device to the TV, use the

cable supplied with the gaming device.

• Refer to the external equipment’s manual for

operating instructions.

• In PC mode, there may be noise associated

with the resolution, vertical pattern, contrast,

or brightness. If noise is present, change the PC

output to another resolution, change the refresh

rate to another rate, or adjust the brightness and

contrast on the PICTURE menu until the picture

is clear.

• Depending upon the graphics card, some

resolution settings may not allow the image to

be positioned on the screen properly.

• Some USB Hubs may not work. If a USB device

connected through a USB Hub is not detected,

connect it directly to the USB port on the TV.

• The TV may be capable of operating without a

set-top from a multichannel video programming

distributor (MVPD).

Connecting to an Antenna or

Cable

Connect an antenna, cable, or cable box to watch

TV. The illustrations may differ from the actual

items and an RF cable is optional.

CAUTION

• Make sure not to bend the copper wire of the RF

cable.

Copper Wire

• Complete all connections between devices, and

then connect the power cord to the power outlet

to prevent damage to your TV.

NOTE

• Use a signal splitter to use 2 TVs or more.

• DTV Audio Supported Codec: MPEG,

Dolby Digital.

• Direct ULTRA HD broadcast is unavailable in

areas without an ULTRA HD signal.

• This TV cannot receive ULTRA HD (3840 x 2160

pixels) broadcasts directly because the related

standards have not been confirmed. (Depending

upon model)

Other Connections

Connect your TV to external devices. For the best

picture and audio quality, connect the external

device and the TV with the HDMI cable. Depending

upon the model, a cable may not be provided.

NOTE

• > > > General >

HDMI ULTRA HD Deep Color:

- On : Support 4K @ 60 Hz (4:4:4, 4:2:2, 4:2:0)

- Off : Support 4K @ 60 Hz 8bit (4:2:0)

• If the device connected to Input Port also

supports ULTRA HD Deep Color, your picture

may be clearer. However, if the device doesn’t

support it, it may not work properly. In that case,

connect the device to a different HDMI port or

change the TV’s HDMI ULTRA HD Deep Color

setting to Off.

- This feature is available only on certain models

which support HDMI ULTRA HD Deep Color.

• HDMI Audio Supported Format:

DTS (44.1 kHz / 48 kHz),

AC3 (32 kHz / 44.1 kHz / 48 kHz),

PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)

(Depending upon model)

12

ENGLISH

Remote Control

(Depending upon model)

The descriptions in this manual are based on

the buttons on the remote control. Please read

this manual carefully and use the TV correctly. To

install batteries, open the battery cover, replace

batteries (1.5 V AAA) matching the

and ends

to the label inside the compartment, and close

the battery cover. Failure to match the correct

polarities of the battery may cause the battery

to burst or leak, resulting in fire, personal injury,

or ambient pollution. To remove the batteries,

perform the installation actions in reverse. This

remote uses infrared light. When in use, it should

be pointed in the direction of the TV’s remote

sensor.

A

(POWER) Turns the TV on or off.

INPUT Changes the input source.

Activates or deactivates the subtitles.

(User Guide) Sees user-guide.

(Search) Shows the search mode.

Returns to the last TV channel.

Number button Enters numbers.

- (Dash) Inserts a dash between numbers such as

2-1 and 2-2.

Accesses the saved channel list.

Alternates between the two last channels

selected (pressing repeatedly).

Adjusts the volume level.

Accesses your favorite channel list.

Shows information on the current program.

Mutes all sounds.

Scrolls through the saved channels.

Moves to the previous or next screen.

B

Shows the previous history.

(Home) Accesses the Home menu.

Shows the list of Channels.

(Settings) Accesses the settings.

By zooming in on the selected area, you

can view it in full screen.

Navigation buttons Scrolls through menus or

options. (up/down/left/right)

Selects menus or options and confirms your

input.

Returns to the previous screen.

Clears all on-screen displays and returns to TV

viewing.

Enables SAP (Secondary Audio Program)

Feature.

Sets the length of time until the TV to turns

off.

, , , , Control buttons for media contents.

Color buttons These access special functions in

some menus. (

, , , )

13

ENGLISH

Magic Remote Functions

(Depending upon model)

When the message

Magic remote battery is low.

Change the battery.

is displayed, replace the

batteries. To install batteries, open the battery

cover, replace batteries (1.5 V AA) matching and

ends to the label inside the compartment, and

close the battery cover. Failure to match the correct

polarities of the battery may cause the battery to

burst or leak, resulting in fire, personal injury, or

ambient pollution. Be sure to point the remote

control at the remote control sensor on the TV.

To remove the batteries, perform the installation

actions in reverse.

This remote uses infrared light and Bluetooth

technology. When in use, it should be pointed in

the direction of the TV’s remote sensor.

A

(POWER) Turns the TV on or off.

(STB POWER) You can turn your set-top box

on or off by adding the set-top box to the universal

remote control for your TV.

Number button Enters numbers.

- (Dash) Inserts a dash between numbers such as

2-1 and 2-2.

Accesses the saved channel list.

(Screen Remote) Displays the Screen Remote.

• Accesses the Universal Control Menu in some

regions.

B

C

B

Adjusts the volume level.

(MUTE) Mutes all sounds.

* Video descriptions function will be enabled.

• SAP (Secondary Audio Program) Feature can also

be enabled by pressing the key.

Scrolls through the saved channels.

(Home) Accesses the Home menu.

* Shows the previous history.

(Search) Search for content such as channels,

movies and other videos, or perform a web search

by entering your search terms in the search box.

(Voice recognition) Network connection is

required to use the voice recognition function.

1 Press and hold the (Search) button.

2 Speak when the voice display window appears

on the TV screen.

Displays the set-top box Home menu.

(When you are not watching with a set-top box:

the set-top box screen is displayed.)

14

ENGLISH

C

(up/down/left/right) Press the up, down,

left or right button to scroll the menu. If you press

buttons while the pointer is in use, the

pointer will disappear from the screen and Magic

Remote will operate like a general remote control.

To display the pointer on the screen again, shake

Magic Remote to the left and right.

Wheel (OK) Press the center of the Wheel

button to select a menu. You can change channels

by using the Wheel button.

Returns to the previous screen.

* Clears all on-screen displays and returns to

TV viewing.

Used for viewing 3D video. (For 3D models)

INPUT Changes the input source.

• Pressing and holding the INPUT button

displays all the lists of external inputs.

Activates or deactivates the subtitles.

(Q. Settings) Accesses the quick settings.

• Pressing and holding the (Q. Settings) button

displays the All Settings menu.

Color buttons These access special functions in

some menus.

(

Red, Green, Yellow, Blue)

, Control buttons for media contents.

You can zoom in on the area where the

remote control is pointed.

* By zooming in on the selected area,

you can view it in full screen.

* : To use the button, press and hold for more than

3 seconds.

Registering Magic Remote

How to Register the Magic Remote

To use the Magic Remote, first pair it with your TV.

1 Put batteries into the Magic Remote and turn the

TV on.

2 Point the Magic Remote at your TV and press the

Wheel (OK) on the remote control.

• If the TV fails to register the Magic Remote, try

again after turning the TV off and back on.

How to Deregister the Magic Remote

Press the and (Home) buttons

at the same time, for five seconds, to unpair the

Magic Remote with your TV.

• Pressing and holding the button will

let you cancel and re-register Magic Remote at

once.

Licenses

Supported licenses may differ by model.

For more information about licenses, visit

www.lg.com.

Open Source Software Notice

Information

To obtain the source code under GPL, LGPL, MPL,

and other open source licenses, that is contained

in this product, please visit

http://opensource.lge.

com.

In addition to the source code, all referred license

terms, warranty disclaimers and copyright notices

are available for download.

LG Electronics will also provide open source code

to you on CD-ROM for a charge covering the cost

of performing such distribution (such as the cost of

media, shipping, and handling) upon email request

to

[email protected]om

. This offer is valid for three

(3) years from the date on which you purchased

the product.

15

ENGLISH

Troubleshooting

• Cannot control the TV with the remote control.

- Check if anything such as tape has been placed

over the receiver.

- Check if there is any obstacle between the

product and the remote control.

- Replace the batteries with new ones.

• No image display and no sound is produced.

- Check if the product is turned on.

- Check if the power cord is connected to a wall

outlet.

- Check if there is a problem in the wall outlet by

connecting other products.

• The TV turns off suddenly.

- Check the power control settings. The power

supply may be interrupted.

- Check if the Sleep Timer / Timer Power Off

feature is activated in the Timers settings.

- If there is no signal while the TV is on, the TV

will turn off automatically after 15 minutes of

inactivity.

Specifications

Product specifications may be changed without

prior notice due to upgrade of product functions.

Estimated yearly energy consumption indicated on

the FTC label is measured in accordance with the

Test Procedures for Television Sets (USA only).

The actual energy consumption depends on the

usage environment (the content watched, TV

settings, etc.).

Television System

ATSC, NTSC-M, 64 & 256 QAM

Program Coverage

VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135,

CADTV 1-135

External Antenna Impedance

75 Ω

Environment Condition

• Operating Temperature

0 °C to 40 °C (32 °F to 104 °F)

• Operating Humidity

Less than 80 %

• Storage Temperature

- 20 °C to 60 °C (-4 °F to 140 °F)

• Storage Humidity

Less than 85 %

Wireless Module Specifications

(For UH6300, UH6350, UH6500, UH6550, UH7500,

UH7700, UH8500, UH9500, UH9800 series)

Wireless Module(LGSBWAC61)Specifications

Wireless LAN (IEEE 802.11a/b/g/n/ac)

Frequency Range Output Power(Max.)

2400 to 2483.5 MHz

5150 to 5725 MHz

5725 to 5850 MHz

15 dBm

16 dBm

12.5 dBm

Bluetooth

Frequency Range Output Power(Max.)

2400 to 2483.5 MHz 10 dBm

As band channels can vary per country, the user

cannot change or adjust the operating frequency.

This product is configured for the regional

frequency table.

For consideration of the user, this device should

be installed and operated with a minimum

distance of 20 cm (7.8 inches) between the device

and the body.

FCC ID: BEJLGSBWAC61

IC: 2703H-LGSBWAC61

16

ENGLISH

(For UH610A, UH6100, UH6150 series)

Wireless LAN Module(WN8122E1) Specification

Standard IEEE802.11a/b/g/n

Frequency Range

2400 to 2483.5 MHz

5150 to 5250 MHz

5725 to 5850 MHz

Output Power

(Max.)

802.11a : 16.5 dBm

802.11b : 16 dBm

802.11g : 15.5 dBm

802.11n - 2.4GHz : 15.5 dBm

802.11n - 5GHz : 16.5 dBm

As band channels can vary per country, the user

cannot change or adjust the operating frequency.

This product is configured for the regional

frequency table.

For consideration of the user, this device should

be installed and operated with a minimum

distance of 20 cm (7.8 inches) between the device

and the body.

Contains FCC ID: BEJWN8122E1

Contains IC: 2703H-WN8122E1

External Control Device Setup

To obtain the external control device setup

information, please visit

www.lg.com

.

17

ENGLISH

Regulatory

FCC Notice

(For USA)

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses,

and can radiate radio frequency energy and, if

not installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning

the equipment off and on, the user is encouraged

to try to correct the interference by one or more of

the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the

equipment and the receiver.

- Connect the equipment to an outlet on a circuit

different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV

technician for help.

This device complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful

interference and (2) this device must accept any

interference received, including interference that

may cause undesired operation of the device.

Any changes or modifications in construction of

this device which are not expressly approved by

the party responsible for compliance could void

the user’s authority to operate the equipment.

FCC Radio Frequency Interference

Requirements (for UNII devices)

High power radars are allocated as primary users

of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands.

These radar stations can cause interference with

and/or damage this device. This device cannot be

co-located with any other transmitter.

FCC RF Radiation Exposure Statement

[For having wireless function (WLAN, Bluetooth,...)]

This equipment complies with FCC radiation

exposure limits set forth for an uncontrolled

environment. This transmitter must not be co-

located or operating in conjunction with any other

antenna or transmitter.

This equipment should be installed and operated

with minimum distance 20 cm (7.8 inches)

between the antenna and your body. Users must

follow the specific operating instructions for

satisfying RF exposure compliance.

Industry Canada Statement

(For Canada)

[For having wireless function (WLAN, Bluetooth,...)]

This device complies with Industry Canada’s

licence-exempt RSSs. Operation is subject to the

following two conditions:

1 This device may not cause interference; and

2 This device must accept any interference,

including interference that may cause undesired

operation of the device.

IC Radiation Exposure Statement

(For Canada)

[For having wireless function (WLAN, Bluetooth,...)]

This equipment complies with IC radiation

exposure limits set forth for an uncontrolled

environment. This equipment should be installed

and operated with minimum distance 20 cm (7.8

inches) between the antenna & your body.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE

FOR ANY RADIO OR TV INTERFERENCE CAUSED

BY UNAUTHORIZED MODIFICATIONS TO THIS

EQUIPMENT. SUCH MODIFICATIONS COULD

VOID THE USER’S AUTHORITY TO OPERATE THE

EQUIPMENT.

WARNING

(For Canada)

[For product having the wireless function using 5

GHz frequency bands]

1 The device for operation in the band 5150–5250

MHz is only for indoor use to reduce the

potential for harmful interference to co-channel

mobile satellite systems;

2 For devices with detachable antenna(s), the

maximum antenna gain permitted for devices in

the bands 5250-5350 MHz and 5470-5725 MHz

shall be such that the equipment still complies

with the e.i.r.p. limit;

3 For devices with detachable antenna(s), the

maximum antenna gain permitted for devices in

the band 5725-5850 MHz shall be such that the

equipment still complies with the e.i.r.p. limits

specified for point-to-point and non-point-to-

point operation as appropriate; and

18

ENGLISH

4 The worst-case tilt angle(s) necessary to remain

compliant with the e.i.r.p. elevation mask

requirement set forth in Section 6.2.2(3) shall be

clearly indicated.(devices operating in the band

5250-5350 MHz with a maximum e.i.r.p. greater

than 200 mW)

5 High-power radars are allocated as primary

users (i.e. priority users) of the bands 5250–5350

MHz and 5650–5850 MHz and that these radars

could cause interference and/or damage to LE-

LAN devices.

Note to Cable/TV Installer

(For USA and Canada)

This reminder is provided to call the CATV system

installer’s attention to Article 820-40 of the

National Electric Code (U.S.A.). The code provides

guidelines for proper grounding and, in particular,

specifies that the cable ground shall be connected

to the grounding system of the building, as close

to the point of the cable entry as practical.

WARNING!

Never place a television set in an unstable

location. A television set may fall, causing serious

personal injury or death. Many injuries, particularly

to children, can be avoided by taking simple

precautions such as:

- Using cabinets or stands recommended by the

manufacturer of the television set.

- Only using furniture that can safely support the

television set.

- Ensuring the television set is not overhanging

the edge of the supporting furniture.

- Not placing the television set on tall furniture

(for example, cupboards or bookcases) without

anchoring both the furniture and the television

set to a suitable support.

- Not placing the television set on cloth or other

materials that may be located between the

television set and supporting furniture.

- Educating children about the dangers of

climbing on furniture to reach the television set

or its controls.

If your existing television set is being retained

and relocated, the same considerations as above

should be applied.

Symbols

Refers to alternating current(AC).

Refers to direct current(DC).

Refers to class II equipment.

Refers to stand-by.

Refers to “ON” (power).

Refers to dangerous voltage.

The model and serial numbers of the TV are located on

the back and on one side of the TV. Record them below

should you ever need service.

MODEL

SERIAL

Declaration of Conformity

Trade Name: LG

Model: 50UH5500-UA, 65UH5500-UA, 49UH610A-UJ

55UH615A-UC, 60UH615A-UC, 65UH615A-UC

43UH6100-UH, 49UH6100-UH, 55UH6150-UB

60UH6150-UB, 65UH6150-UB, 43UH6500-UB

49UH6500-UB, 55UH6550-UB, 60UH6550-UB

65UH6550-UB, 75UH6550-UB, 40UH6300-UA

50UH6300-UA, 58UH6300-UA, 43UH7500-UA

49UH7500-UA, 55UH7500-UA, 60UH7500-UA

65UH7500-UA, 49UH7700-UA, 49UH7700-UB

55UH7700-UB, 60UH7700-UB, 65UH7700-UB

70UH6350-UB, 55UH8500-UA, 60UH8500-UA

65UH8500-UA, 75UH8500-UA, 55UH9500-UA

65UH9500-UA, 86UH9500-UA, 98UH9800-UA

Responsible Party: LG Electronics Inc.

Address: 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A

TEL: 201-266-2534

LG Customer Information Center

For inquires or comments, visit www.lg.com or call;

1-888-542-2623 CANADA

1-800-243-0000 USA, Consumer User

1-888-865-3026 USA, Commercial User

Register your product Online!

www.lg.com

La page charge ...

LG 60UH6550 Le manuel du propriétaire

Ce manuel convient également à

LG 60UH6550 Le manuel du propriétaire

dans d''autres langues

Documents connexes