Samsung J1220S Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur

Ce manuel convient également à

Safety Precautions ................................................................ 2
lnstalling the Washing Machine ........................................... 3
Unpacking the washing machine ............................................ 3
Overview of the washing machine .......................................... 3
Selecting a location ................................................................. 3
Adjusting the leveling feet ....................................................... 3
Removing the shipping bolts ................................................... 4
Connecting the water supply hose .......................................... 4
Positioning the drain hose ....................................................... 4
Washing a Load of Laundry ................................................. 5
Overview of the control panel ................................................. 5
Washing for the first time ........................................................ 6
Putting detergent in the washing machine .............................. 6
Washing clothes manually ....................................................... 6
Selecting options ..................................................................... 7
Washing tips and hints ............................................................ 7
Maintaining the Washing Machine ....................................... 8
Repairing a frozen washing machine ...................................... 8
Cleaning the exterior ............................................................... 8
Cleaning the debris filter ......................................................... 8
Cleaning the water hose mesh filter ........................................ 8
Troubleshooting .................................................................... 9
Problems and solutions ........................................................... 9
Understanding error messages ............................................... 9
Programme chart ................................................................. 10
Appendix ...............................................................................11
Fabric care chart ....................................................................11
Electrical warnings .................................................................11
Protecting the environment ....................................................11
Declaration of conformity .......................................................11
Specification .......................................................................... 12
Washing Machine
Owners Instructions
J1420(V/S)
J1220(V/S)
J1020(V/S)
CODE NO : DC68-01999P-ENG
Register your porduct at
www.samsung.com/global/register
J1420-01999P-ENG-0531-01.indd 1J1420-01999P-ENG-0531-01.indd 1 2005-06-07 ¿ÀÀü 10:56:582005-06-07 ¿ÀÀü 10:56:58
Congratulations on your purchase of this Samsung washing machine. These Owner's Instructions contain
valuable information on the installation, use, and care of this appliance. Please take the time to read these
instructions so that you can take full advantage of the washing machine's features and enjoy this appliance
for many years to come.
Before using the appliance
Packing materials can be dangerous to children; keep all packing material (plastic bags, polystyrene, etc.)
well out of the reach of children.
The appliance is designed for home use only.
Make sure that water and electrical connections are made by qualified technicians, observing the
manufacturer's instructions (see "Installing the Washing Machine" on page 3) and local safety regulations.
All packaging and shipping bolts must be removed before the appliance is used. Serious damage may
occur if they are not removed. See "Removing the shipping bolts" on page 4.
Before washing clothes for the first time, you must run a complete cycle without clothes. See "Washing
for the first time" on page 8.
Safety instructions
Before cleaning or carrying out maintenance, unplug the appliance from the electrical outlet or set the
(On/Off) button to Off.
Make sure that the pockets of all clothing to be washed are empty.
Hard, sharp objects, such as coins, safety pins, nails, screws, or stones can cause extensive damage to
the appliance.
Always unplug the appliance and turn off the water after use.
Before you open the door of the appliance, check that the water has drained. Do not open the door if you
can still see water.
Pets and small children may climb into the appliance. Check the appliance before each use.
The glass door becomes very hot during the washing cycle. Keep children away from the appliance while
it is in use.
Do not attempt to repair the appliance yourself. Repairs made by inexperienced or unqualified persons
may cause injury and/or make more serious repairs to the appliance necessary.
If the plug (power supply cord) is damaged, it must be replaced by the manufacturer or its service agent
or a similar qualified person in order to avoid a hazard.
This appliance should only be serviced by an authorized service center, and only genuine spare parts
should be used.
This appliance is not intended for use by young children or infirm persons unless theyhave been ade-
quately supervised by a responsible person to ensure that they can use the appliance safely. Young chil-
dren should be supervised to ensure that they do not play with the appliance.
This appliance has to be connected to the plug endurable to proper power consumption.
This appliance has to be positioned so that the plug is accessible after installation.
SAVE THESE INSTRUCTIONS
2
Safety Precautions
J1420-01999P-ENG-0531-01.indd 2J1420-01999P-ENG-0531-01.indd 2 2005-06-07 ¿ÀÀü 10:58:012005-06-07 ¿ÀÀü 10:58:01
Unpacking the Washing Machine
Unpack your washing machine and inspect it for shipping damage. Also make sure that you have received all of the
items shown below. If the washing machine was damaged during shipping or you do not have all of the items, con-
tact your Samsung dealer immediately.
Overview of the washing machine
Selecting a location
Before you install the washing machine, select a location with the following characteristics:
A hard, level surface (if the surface is uneven, see "Adjusting the leveling feet," below)
Away from direct sunlight.
• Adequate ventilation
Room temperature that will not fall below 0˚C
Away from sources of heat such as coal or gas Make sure that the washing machine does not stand on
its power cord. Ventilation openings must not be obstructed by carpeting when the washing machine is
installed on a carpeted floor.
Adjusting the leveling feet
If the floor is uneven, adjust the feet (do not insert pieces of wood or any other objects under the feet):
1. Loosen the leg bolt by turning it with your hand until it is at the desired height.
2. Tighten the locking nut by turning it with the wrench.
• Place the washer on a sturdy, flat surface.
If the washer is placed on an uneven or weak surface,
noise or vibration occurs.
(Only a 1 degrees angle is allowed.)
3
Cover top
Base cover
Adjustable feet
Debris filter
Door
Detergent
drawer
Control panel
Bolt hole
covers
Plug
Cold Water
supply hose
Drain Hose
Installing the Washing Machine
J1420-01999P-ENG-0531-01.indd 3J1420-01999P-ENG-0531-01.indd 3 2005-06-07 ¿ÀÀü 10:58:012005-06-07 ¿ÀÀü 10:58:01
Removing the shipping bolts
Before using the washing machine, you must remove all of the shipping bolts from the back of the unit.
To remove the bolts:
1. Loosen all bolts with the wrench before removing them.
2. Take each bolt head and pull it through the wide part of
the hole. Repeat for each bolt.
3. Fill the holes with the supplied plastic covers.
4. Keep the shipping bolts for future use.
Connecting the water supply hose
The water supply hose must be connected to the washing machine at one end and to the water faucet at the
other. Do not stretch the water supply hose. If the hose is too short and you do not wish to move the water
faucet, replace the hose with a longer, high pressure hose.
To connect the water supply hose:
1. Take the L-shaped arm fitting for the cold water supply
hose and connect to the cold water supply intake on the
back of the machine. Tighten by hand.
2. Connect the other end of the cold water supply hose to
your sink's cold water faucet and tighten it by hand.
If necessary, you can reposition the water supply hose at
the washing machine end by loosening the fitting, rotating
the hose, and retightening the fitting.
Positioning the drain hose
The end of the drain hose may be positioned in three ways:
Over the edge of a sink
The drain hose must be placed at a height of between 60 and
90 cm. To keep the drain hose spout bent, use the supplied
plastic hose guide. Secure the guide to the wall with a hook
or to the faucet with a piece of string to prevent the drain
hose from moving.
ln a sink drain pipe branch
The drain pipe branch must be above the sink siphon so that
the end of the hose is at least 60 cm above the ground.
ln a drain pipe
Samsung recommends that you use a 65 cm high vertical pipe; it must be no shorter than 60 cm and
no longer than 90 cm.
4
Installing the Washing Machine
J1420-01999P-ENG-0531-01.indd 4J1420-01999P-ENG-0531-01.indd 4 2005-06-07 ¿ÀÀü 10:58:022005-06-07 ¿ÀÀü 10:58:02
Overview of the control panel
5
321 4 5 6 7 8 9
1. Detergent dispenser
2. Display panel
Displays wash cycle and error messages.
During execution of the program, the program indicator blinks.
3. Program Select button
Press the button repeatedly to select one of the six available wash program.
Cotton Colour Synthetics Delicates Wool Quick Rinse+Spin Spin
4. Temperature selection button
Press the button repeatedly to cycle through the available water temperature options
(cold , 30˚C, 40˚C , 60˚C and 95˚C).
When pressing this button during washing, you can see the selected temperature in the display panel.
5. Spin selection button
Press the button repeatedly to cycle through the available spin speed options.
J1420 (V/S)
no spin, 400, 800, 1200, 1400 rpm
J1220 (V/S)
no spin, 400, 800, 1000, 1200 rpm
J1020 (V/S)
no spin, 600, 800, 1000 rpm
When pressing this button during operation, you can see the selected spin speed in the display panel.
When all buttons are turned off NO SPIN.
6. Option button
Press the button repeatedly to cycle through the available partial wash options
Prewash Rinse
+
Rinse
Hold Prewash
+Rinse
+
Prewash
+Rinse
Hold
Rinse
+
+Rinse
Hold Prewash
+Rinse
+
+Rinse
Hold Cancle
Note : Prewash is only available when washing cotton, synthetic or delicate.
7. Delay Start selection button
Press this button repeatedly to rotate between the retarded start options available.
(from 1 hour to 24hour, in 1 hour increments)
8. Start/Pause button
Press to pause and restart programs.
9. (On/Off) button
Press once to turn the washing machine on, press again to turn the washing machine off.
If the washing machine power is left on for longer than 10 minutes without any buttons
being touched, the power automatically turns off.
What is the “Child Lock” function?
- If you press the “Child Lock” button(Spin+Option button) longer than 2 sec during operation,
this function is selected.
- If once this function is selected, no change can be done until the end of laundry.
- Press the “Child Lock” button(Spin+Option button) longer than 2 sec to cancel the function.
Washing a Load of Laundry
J1420-01999P-ENG-0531-01.indd 5J1420-01999P-ENG-0531-01.indd 5 2005-06-07 ¿ÀÀü 10:58:022005-06-07 ¿ÀÀü 10:58:02
6
WM stops the current step of the cycle or does not proceed to the next
step of washing (indication of remain time on LED display may increase).
Your new washing machine is equipped with Fuzzy Logic system, which not only sets the optimum level of
water and other parameters of washing, but also controls the washing process as well as makes necessary
corrections in order to provide better washing results. In the above- mentioned matter, the Fuzzy Logic sys-
tem has detected deviations in washing cycle such as: high quantity of detergent at the end of the cycle, high
vibration level while spinning, etc.You can adjust existing wash programs, i.e. change wash temperature and
spin speed. After detection of such abnormalities, the washing machine is suspending the normal course of
program in order to normalize these parameters and continue the cycle. Fuzzy logic system makes 7 attempts
to eliminate such deviations. If it is impossible to normalize the above mentioned deviations by Fuzzy Logic
system, you will see the corresponding indication on LED lamps. (see chapter “Troubleshooting”) The opera-
tion of Washing machine that corresponds to above- mentioned scheme is considered to be normal.
Washing for the first time
Before washing clothes for the first time, you must run a complete cycle without clothes. To do this:
1. Press the
(On/Off) button.
2. Pour a little detergent in the detergent drawer .
3. Turn on the water supply to the washing machine.
4. Press the Temperature button repeatedly until 40˚C is displayed.
5. Press the Start/Pause button.
This will remove any water from the manufacturer’s test run remaining in the machine.
Putting detergent in the washing machine:
1. Pull out the detergent drawer.
2. Add laundry detergent into compartment .
3. Add softener into compartment (if you desire).
4. Add prewash detergent into compartment (if you desire).
Option
Using Hot Water
The hot water valve is operated when you select
a water temperature option above 60˚C (60˚C or 95˚C).
Washing clothes manually
You can wash clothes manually without using the Fuzzy Logic feature. To do so:
1. Turn on the water at the water source sink.
2. Press the
(On/Off) button on the washing machine.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling.
5. Close the door.
6. Put the detergent in the detergent drawer
.
7. Repeatedly press the Program button to select the cycle you prefer:
Cotton, Colour, Synthetics, Delicates, and Quick...
8. Press the Spin button to select the spin speed (no spin, 600, 800, …, no spin, … )
9. Repeatedly press the Option button to select the cycle you prefer (Prewash, Rinse
+
, Rinse hold, ... )
10. Press the Temperature button to select the temperature (cold water , 40˚C, 60˚C, 95˚C).
11. Press the Start/Pause button and the machine will begin the cycle.
When the cycle is finished:
1. Open the door.
Note: The door will not open until 3 minutes after the machine stops or the power turns off.
2. Remove laundry.
Washing a Load of Laundry
J1420-01999P-ENG-0531-01.indd 6J1420-01999P-ENG-0531-01.indd 6 2005-06-07 ¿ÀÀü 10:58:022005-06-07 ¿ÀÀü 10:58:02
Selecting options
Prewash
Prewash is only available when washing cotton, colour, synthetics, delicate clothes. To use prewash:
1. Load the prewash detergent into compartment
of the detergent drawer.
2. Select "Cotton" with the Program select button.
3. Press the Option button until the "Prewash" indicator lights up on the control panel.
4. Press Start/Pause to begin the cycle.
Rinse
+
Your machine will run through an additional rinsing cycle.
The washing duration will be prolonged accordingly.
Rinse Hold
The laundry remains soaking in the final rinse water.
Before the laundry can be unloaded, the "Spin" program must be
run.
Washing tips and hints
Sorting your laundry: Sort your laundry according to the following characteristics:
Type of fabric care label symbol: Sort laundry into cottons, mixed fibers, synthetics, silks,
wools and rayon.
Colour: Divide whites and colours. Wash new, coloured items separately.
Size: Placing items of different sizes in the same load will improve the washing action.
Sensitivity: Wash delicate items separately, using the Delicate wash program for pure new wool, curtains
and silk articles. Check the labels on the items you are washing or refer to the fabric care chart in the
appendix.
Emptying pockets: Coins, safety pins and similar items can damage linen, the washing machine drum,
and the water tank.
Securing fasteners: Close zippers and fasten buttons or hooks; loose belts or ribbons should be tied
together.
Determining load capacity: Do not overload the washing machine or your laundry may not wash properly.
Use the chart below to determine the load capacity for the type of laundry you are washing.
Detergent tips: The type of detergent you should use is based on the type of fabric (Cotton, Synthetic,
Delicate items) colour, wash temperature, degree and type of soiling. Always use "low suds" laundry soap,
which is designed for automatic washing machines.
When determining the detergent quantity, it’s necessary to consider recommendations of the detergent
manufacturer, indicated on the package, as well as weight, type of laundry, it’s fouling factor and water
hardness in your region.
Note:
Keep detergents and additives in a safe, dry place out of the reach of children.
7
Washing a Load of Laundry
Fabfi c Type Load Capacity
J1420 (V/S) / J1220 (V/S) / J1020 (V/S)
Colour/cotton
-average/lightly soiled
7.0 kg
-heavily soiled 7.0 kg
Synthetic 4.0 kg
Delicate 2.5 kg
Wool 2.0 kg
Quick 4.0 kg
J1420-01999P-ENG-0531-01.indd 7J1420-01999P-ENG-0531-01.indd 7 2005-06-07 ¿ÀÀü 10:58:032005-06-07 ¿ÀÀü 10:58:03
Repairing a frozen washing machine
If the temperature drops below freezing and your washing machine is frozen:
1. Unplug the washing machine.
2. Pour warm water on the source faucet to loosen the water supply hose.
3. Remove the water supply hose and soak it in warm water.
4. Pour warm water into the washing machine drum and let it sit for 10 minutes.
5. Reconnect the water supply hose to the water faucet and check if the water supply and drain operations
are normal.
Cleaning the exterior
1. Wipe the washing machine surfaces, including the control panel, with a soft cloth and non-abrasive
household detergents.
2. Use a soft cloth to dry the surfaces.
3. Do not pour water on the washing machine.
Cleaning the debris filter
Clean the debris filter 2 or 3 times a year.
1. Remove the base cover from the front of the
washing machine.
2. Unscrew the filter cap and take it out.
3. Wash any dirt or other material from the filter.
Make sure the drain pump propeller behind the
filter is not blocked. Replace the filter cap.
4. Replace the base cover.
Cleaning the water hose mesh filter
You should clean the water hose mesh filter at least one time per year, or when the lamps
on your machine flickers:
To do this:
1. Turn off the water source to the washing machine.
2. Unscrew the hose from the back of the washing machine.
3. With a pair of pliers, gently pull out the mesh filter
from the end of the hose and rinse it under water
until clean. Also clean the inside and outside of the
threaded connector.
4. Push the filter back into place.
5. Screw the hose back onto the washing machine.
6. Turn on the faucet and make sure the connections
are watertight.
8
Maintaining the Washing Machine
J1420-01999P-ENG-0531-01.indd 8J1420-01999P-ENG-0531-01.indd 8 2005-06-07 ¿ÀÀü 10:58:032005-06-07 ¿ÀÀü 10:58:03
Problems and solutions
The washing machine will not start
Make sure the door is firmly closed.
Make sure the washing machine is plugged in.
Make sure the water source faucet is turned on.
Make sure to press the Start/Pause button.
No water or insufficient water supply
Make sure the water source faucet is turned on.
Make sure the water source hose is not frozen.
Make sure the water intake hose is not bent.
Make sure the filter on the water intake hose is not clogged.
Detergent remains in the detergent drawer after the wash program is complete
Make sure the washing machine is running with sufficient water pressure.
Put the detergents in the inner parts of the detergent drawer(away from the outside edges).
Washing machine vibrates or is too noisy
Make sure the washing machine is set on a level surface. If the surface is not level,
adjust the washing machine feet to level the appliance (see page 3).
Make sure that the shipping bolts are removed (see page 4).
Make sure the washing machine is not touching any other object.
Make sure the laundry load is balanced.
The washing machine does not drain and/or spin
Make sure the drain hose is not squashed or bent.
Make sure the water hose mesh filter is not clogged (see page 8).
Understanding error messages
Before contacting After-Sales service:
1. Try to remedy the problem (See "Troubleshooting" on this page).
2. Restart the programme to see if the fault is repeated.
3. If the malfunction persists, call after-sales service and describe the problem.
9
Error displayed Solution
Close the door.
Make sure the source water faucet is turned on.
Check the water pressure.
Clean the debris filter.
Make sure the drainage hose is installed correctly.
Laundry load is unbalanced; loosen any tangled laundry.
If only one item of clothing needs washing, such as a bathrobe or jeans, the
final spin result might be unsatisfactory and an "UE" error message will be
shown in the display window.
Check the end of the drain hose is too low. (Make sure the holder of drain
hose in the back is intact)
Check the end of the drain hose is submerged in water.
L
Troubleshooting
J1420-01999P-ENG-0531-01.indd 9J1420-01999P-ENG-0531-01.indd 9 2005-06-07 ¿ÀÀü 10:58:032005-06-07 ¿ÀÀü 10:58:03
10
Programme Chart
(
user option)
PROGRAM
Max load
(kg)
Detergent
And Additives
Temperature
(MAX) ˚C
Spin Speed
(MAX)rpm
Pre
wash
Water
( l )
Electri-
city
(kwh)
J1420 (V/S)
J1220 (V/S)
J1020 (V/S)
Pre
wash
wash
Sof
tener
J1420
(V/S)
J1220
(V/S)
J1020
(V/S)
Cotton
7.0
yes
95 1400 1200 1000
60 1.33
Colour 7.0
yes
60 1400 1200 1000
60 0.55
Synthetic 4.0
yes
60 800 800 600
55 0.50
Delicate 2.5
yes
40 800 800 600
55 0.50
Wool 2.0 - yes
40 400 400 400 - 50 0.45
Quick
4.0 - yes
60 1400 1200 1000 - 35 0.33
PROGRAM Type of WASH
Cotton
Colour
Synthetic
Delicate
Wool
Quick
Averagely or lightly soiled cottons, bed linen, table linen, underwear, towels, shirts,etc.
Average or lightly soiled cottons, bed linen, table linen, underwear, towels, shirts, etc.
Lighly or averagely soiled blouses, shirts, etc. Made of polyester(Diolen, Trevira),
polyamide(perlon, Nylon) or similar blends.
Delicate curtains, dresses, skirts, shirts and blouses.
Only machine washable wollens with pure new wool label.
Lightly soiled cottons or linen blouses, shirts, dark coloured terry cloth, coloured linen
articles, jeans, etc.
1. The programme duration data has been measured under the conditions specified in Standard IEC 456.
2. Consumption in individual homes may differ from the values given in the table due to variations in the
pressure and temperature of the water supply, the load and the type of laundry.
J1420-01999P-ENG-0531-01.indd 10J1420-01999P-ENG-0531-01.indd 10 2005-06-07 ¿ÀÀü 10:58:042005-06-07 ¿ÀÀü 10:58:04
Fabric care chart
Electrical warnings
To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind:
Operate the appliance only from the type of power source indicated on the marking label. If you are not
sure of the type of power supplied to your home, consult your appliance dealer or local power company.
Use only a grounded or polarized outlet. This plug will fit into the power outlet only one way. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug still doesn't fit, contact
your electrician to replace your outlet.
Protect the power cord. Power supply cords should be routed so that they are unlikely to be walked on
or pinched by items placed on or against them. Pay particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the unit.
Do not overload the wall outlet or extension cords. Overloading can result in fire or electric shock.
Protecting the environment
This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance,
please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot
be connected to a power source. Remove the door so that animals and small children
cannot get trapped inside the appliance.
Do not exceed the detergent quantities recommended in the detergent manu-facturers' instructions.
Use stain removal products and bleaches before the wash cycle only when strictly necessary.
Save water and electricity by only washing full loads
(the exact amount depends upon the program used).
Declaration of conformity
This appliance complies with European safety standards, EC directive 93/68 and EN Standard 60335.
11
Resistant material
Delicate fabric
Item may be washed at 95˚C
Item may be washed at 60˚C
Item may be washed at 40°C.
Item may be washed at 30°C.
Item may be hand washed
Dry clean only
Can be bleached in cold water
Do not bleach
Can be ironed at 200˚C max
Can be ironed at 150˚C max
Can be ironed at 100˚C max
Do not iron
Can be dry cleaned using any solvent
Dry clean with perchloride, lighter fuel,
pure alcohol or R113 only
Dry clean with aviation fuel, pure alcohol or
R113 only
Do not dry clean
Dry flat
Can be hung to dry
Dry on clothes hanger
Tumble dry, normal heat
Tumble dry, reduced heat
Do not tumble dry
Appendix
J1420-01999P-ENG-0531-01.indd 11J1420-01999P-ENG-0531-01.indd 11 2005-06-07 ¿ÀÀü 10:58:042005-06-07 ¿ÀÀü 10:58:04
- Don't hesitate to call any AS center nearby with your name, address,
telephone number, model number and serial number of your machine
when anything wrong with your product occurs.
IN CASE THE NEED FOR
SERVICING ARISES
Specification
TYPE FRONT LOADING WASHER
DIMENSION
J1420 (V/S) / J1220 (V/S) / J1020 (V/S)
W598MM x D600MM x H844MM
WATER PRESSURE 50 kPa ~ 800kPa
WEIGHT
J1420 (V/S) / J1220 (V/S) / J1020 (V/S)
75 KG
WASH AND SPIN CAPACITY
(DRY LAUNDRY)
J1420 (V/S) / J1220 (V/S) / J1020 (V/S)
7.0 KG
POWER
CONSUM-
PTION
WASHING
AND
HEATING
J1420 (V/S) / J1220 (V/S) / J1020 (V/S)
220V / 2000W
240V / 2400W
SPIN (230V)
J1420 (V/S) J1220 (V/S) J1020 (V/S)
700W 360W 320W
PUMPING 34W
WATER VOLUME
(STANDARD COURSE)
J1420 (V/S) / J1220 (V/S) / J1020 (V/S)
60l
SPIN
REVOLUTION
RPM
J1420 (V/S) J1220 (V/S) J1020 (V/S)
1400 1200 1000
Appendix
J1420-01999P-ENG-0531-01.indd 12J1420-01999P-ENG-0531-01.indd 12 2005-06-07 ¿ÀÀü 10:58:042005-06-07 ¿ÀÀü 10:58:04
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Samsung J1220S Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues