Axis Q1910 Guide d'installation

ENGLISH DEUTSCH ITALIANO ESPAÑOL

INSTALLATION GUIDE

FRAN

Ç

AIS

AXIS Q1910 Thermal Network Camera

AXIS Q1910-E Thermal Network Camera

Legal Considerations

Video and audio surveillance can be prohibited by laws

that vary from country to country. Check the laws in

your local region before using this product for

surveillance purposes.

This product includes one (1) H.264 decoder license.

Trademark Acknowledgments

Apple, Boa, Bonjour, Ethernet, Internet Explorer, Linux,

Microsoft, Mozilla, Netscape Navigator, OS/2, Real,

SMPTE, QuickTime, UNIX, Windows, WWW are

registered trademarks of the respective holders. Java

and all Java-based trademarks and logos are trademarks

or registered trademarks of Sun Microsystems, Inc. in

the United States and other countries. Axis

Communications AB is independent of Sun

Microsystems Inc. UPnP™ is a certification mark of the

UPnP™ Implementers Corporation.

Electromagnetic Compatibility (EMC)

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is

no guarantee that interference will not occur in a

particular installation.

If this equipment does cause harmful interference to

radio or television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or

more of the following measures: Re-orient or relocate

the receiving antenna. Increase the separation between

the equipment and receiver. Connect the equipment to

an outlet on a different circuit to the receiver. Consult

your dealer or an experienced radio/TV technician for

help. Shielded (STP) network cables must be used with

this unit to ensure compliance with EMC standards.

USA - This equipment has been tested and found to

comply with the limits for a Class B computing device

pursuant to Subpart B of Part 15 of FCC rules, which are

designed to provide reasonable protection against such

interference when operated in a commercial

environment. Operation of this equipment in a

residential area is likely to cause interference, in which

case the user at his/her own expense will be required to

take whatever measures may be required to correct the

interference.

Canada - This Class B digital apparatus complies with

Canadian ICES-003

Europe - This digital equipment fulfills the requirements

for radiated emission according to limit B of EN55022,

and the requirements for immunity according to

EN55024 residential and commercial industry.

Japan - This is a class B product based on the standard

of the Voluntary Control Council for Interference from

Information Technology Equipment (VCCI). If this is used

near a radio or television receiver in a domestic

environment, it may cause radio interference. Install and

use the equipment according to the instruction manual.

Australia - This electronic device meets the

requirements of the Radio communications

(Electromagnetic Compatibility) Standard AS/NZS

CISPR22:2002.

Korea - Class B: As this equipment has obtained EMC

registration for household use, it can be used in any area

including residential areas.

Safety

Complies to EN 60950-1 (IEC 60950-1), Safety of

Information Technology Equipment.

Equipment Modifications

This equipment must be installed and used in strict

accordance with the instructions given in the user

documentation. This equipment contains no

user-serviceable components. Unauthorized equipment

changes or modifications will invalidate all applicable

regulatory certifications and approvals.

Liability

Every care has been taken in the preparation of this

document. Please inform your local Axis office of any

inaccuracies or omissions. Axis Communications AB

cannot be held responsible for any technical or

typographical errors and reserves the right to make

changes to the product and documentation without

prior notice. Axis Communications AB makes no

warranty of any kind with regard to the material

contained within this document, including, but not

limited to, the implied warranties of merchantability

and fitness for a particular purpose. Axis

Communications AB shall not be liable nor responsible

for incidental or consequential damages in connection

with the furnishing, performance or use of this material.

RoHS

This product complies with both the European

RoHS directive, 2002/95/EC, and the Chinese

RoHS regulations, ACPEIP.

WEEE Directive

The European Union has enacted a Directive

2002/96/EC on Waste Electrical and Electronic

Equipment (WEEE Directive). This directive is

applicable in the European Union member

states.

The WEEE marking on this product (see right) or its

documentation indicates that the product must not be

disposed of together with household waste. To prevent

possible harm to human health and/or the environment,

the product must be disposed of in an approved and

environmentally safe recycling process. For further

information on how to dispose of this product correctly,

contact the product supplier, or the local authority

responsible for waste disposal in your area.

Business users should contact the product supplier for

information on how to dispose of this product correctly.

This product should not be mixed with other commercial

waste.

Support

Should you require any technical assistance, please

contact your Axis reseller. If your questions cannot be

answered immediately, your reseller will forward your

queries through the appropriate channels to ensure a

rapid response. If you are connected to the Internet, you

can:

• download user documentation and firmware updates

• find answers to resolved problems in the FAQ database.

Search by product, category, or phrases

• report problems to Axis support by logging in to your

private support area.

AXIS Q1910/Q1910-E Installation Guide Page 3

ENGLISH

Safeguards and warnings

Please read through this Installation Guide carefully before installing the product. Keep the

Installation Guide for further reference.

Safety Notice - Battery Replacement

The AXIS Q1910/Q1910-E uses a 3.0V CR2032 Lithium battery as the power supply for its internal real-

time clock (RTC). Under normal conditions this battery will last for a minimum of 5 years. Low battery

power affects the operation of the RTC, causing it to reset at every power-up. A log message will appear

when the battery needs replacing. The battery should not be replaced unless required!

• If the battery does need replacing, please contact www.axis.com/techsup for assistance.

• Danger of Explosion if battery is incorrectly replaced

• Replace only with the same or equivalent battery, as recommended by the manufacturer.

• Dispose of used batteries according to the manufacturer's instructions.

Care and Maintenance

• Do not use chemicals, caustic agents, or aerosol cleaners. Use a damp cloth for cleaning.

• Only use accessories and replacement parts provided or recommended by Axis.

• Do not attempt to repair the product by yourself, contact Axis or your Axis reseller for service matters.

!CAUTION! - When transporting the camera, use the original packaging or equivalent to

prevent damage to the product.

!CAUTION! - Avoid exposing the camera to vibration, shocks or heavy pressure and do

not install the camera on unstable brackets, unstable or vibrating surfaces or walls,

since this could cause damage to the product.

!CAUTION! - Only use handtools when installing the camera, the use of electrical tools

or excessive force could cause damage to the product.

!CAUTION! - Do not aim the camera lens toward the sun or other high-intensity

radiation sources since this could cause damage to the sensor.

!IMPORTANT! - To use AXIS Q1910 outdoors, it must be installed in an approved

outdoor housing. Please install AXIS Q1910-E for outdoor use or see www.axis.com for

more information on outdoor housing and other accessories.

!IMPORTANT! - The camera should be installed by a trained professional. Please observe

relevant national and local regulations for the installation.

!IMPORTANT! - Do not install the camera near heat sources since fluctuating

temperatures may affect image quality.

!IMPORTANT! - This product must be used in compliance with local laws and

regulations.

!IMPORTANT! - Store and transport the camera in a dry and ventilated environment.

Keep the storage and operating temperature between -40ºC and 50ºC

(-40ºF and122ºF).

AXIS Q1910/Q1910-E Installation Guide Page 5

ENGLISH

AXIS Q1910/Q1910-E Installation Guide

This installation guide provides instructions for installing an AXIS Q1910/Q1910-E Thermal

Network Camera on your network. For all other aspects of using the product, please see the User’s

Manual, available from www.axis.com

Installation steps

1. Check the package contents against the list below.

2. Hardware overview. See page 6.

3. Install the hardware.

• Install AXIS Q1910. See page 8.

• Install AXIS Q1910-E. See page 8.

• Connect the cables. See page 9.

4. Assign an IP address. See page 10.

5. Set the password. See page 13.

Package contents

Item Models/variants/notes

Network camera AXIS Q1910/Q1910-E

Terminal block connector 4-pin connector for connecting external devices to the I/O terminal

connector

3-pin connector for power connection

2-pin connector for RS-485/422 connection

Camera stand (AXIS Q1910) Metal stand supplied with mounting screws

Wall bracket (AXIS Q1910-E) Wall bracket with internal cable channel

Tools (AXIS Q1910-E) Torx T20 Screwdriver

Allen key

Network cable (AXIS Q1910-E) Outdoor network cable 5 m (16 ft.) with gasket

Printed materials AXIS Q1910/Q1910-E Installation Guide (this document)

Axis Warranty Document

Extra serial number labels (2x)

Optional accessories See www.axis.com for information on power accessories and outdoor

housings, product documentation, installation tools and other software.

Page 6 AXIS Q1910/Q1910-E Installation Guide

Hardware overview

Part number (P/N) & Serial number (S/N).

The serial number may be required

during the installation.

Connector (not used)

Button (not used)

1/4” screw mount for

wall/ceiling stand

Window heater connector

LED (not used)

Status indicator LED

Network connector

Audio in

Audio out

SD card slot

Power connector

Power indicator LED

Network indicator LED

Control

button

I/O

connector

RS-485/422

connector

Microphone

AXIS Q1910/Q1910-E

Rear view

Bottom view

Side view

AXIS Q1910/Q1910-E Installation Guide Page 7

ENGLISH

AXIS Q1910-E

Sun shield adjustment

Sun shield

Top cover

Thermal network camera

Bottom cover

Cable cover

Bottom cover screws (4x)

Cable cover screws (4x)

Cable holes

Safety wire tab

Protective window

Network cable (route

Wall bracket

Bracket adjustment screw

through wall bracket)

Gasket

Bracket adapter

screw (2x)

Bracket screws (4x)

Page 8 AXIS Q1910/Q1910-E Installation Guide

Install the hardware

For outdoor use, please install AXIS Q1910-E, or see www.axis.com for more information on

outdoor housing and other accessories.

Install AXIS Q1910

The instructions below describe the installation of AXIS Q1910.

1. Attach the metal stand to the camera and make sure that the screws and plugs are appropriate

for the material (e.g. wood, metal, sheet rock, stone).

2. Connect the cables, see

Connect the cables,

on page 9.

Install AXIS Q1910-E

The instructions below describe the installation of AXIS Q1910-E.

Prepare the network cable

If a cable other than the provided cable is used, you need to prepare a network cable with a gasket.

Gently force the cable through the gasket provided and attach a network connector. It may be

necessary to pierce a hole in the gasket with the supplied screwdriver.

Notes:

• Do not force the network connector into the gasket.

• Do not pierce the gasket with a knife or other sharp object.

Install the wall bracket

1. Use the supplied drill template to prepare a wall, ceiling, or pole for installation of the wall

bracket.

2. Route the network cable through the wall bracket, the rubber gasket should be on the bracket

adapter end of the wall bracket, see illustration on page 7.

3. Install the wall bracket on a wall, ceiling, or pole and make sure that the screws and plugs are

appropriate for the material (e.g. wood, metal, sheet rock, stone).

AXIS Q1910/Q1910-E Installation Guide Page 9

ENGLISH

Install the camera on the bracket

1. Install the camera with the bottom cover on the bracket and tighten the bracket screws.

2. Remove the gasket from one of the holes in the bottom cover, see illustration on page 7.

3. Route the cable through the hole and attach the cable gasket to the hole.

4. Connect the cables, see

Connect the cables,

on page 9.

5. Take the top cover and attach the safety wire to the tab on the bottom cover.

6. Connect the window heater to the window heater connector on the thermal camera.

7. Install the top cover and tighten the bottom cover screws.

8. Install the cable cover and tighten the cable cover screws.

9. Loosen the sun screen adjustment screws and adjust the sun shield to the front position.

10. Loosen the bracket adjustment screw to aim the camera to the point of interest. See

Access the

video stream,

on page 14 for information on how to view the video stream.

Connect the cables

1. Optionally insert an SD memory card (not included) into the SDHC (Secure Digital High

Capacity) card slot. A standard or high capacity SD card is required to store images locally in

the camera.

2. Optionally connect external input/output devices. See page 17 for information on the terminal

connector pins.

3. Optionally connect an active speaker and/or external microphone.

4. Connect the camera to the network using a shielded network cable.

5. Connect power, using one of the methods listed below:

• PoE (Power over Ethernet, Class 3). If available, this is automatically detected when the

network cable is connected.

• Connect an external power adapter to the power connector block, see

Unit connectors,

on

page 17 for wiring information.

6. Check that the indicator LEDs indicate the correct conditions. See the table on page 19 for

further details.

Page 10 AXIS Q1910/Q1910-E Installation Guide

Assign an IP address

Most networks today have a DHCP server that automatically assigns IP addresses to connected

devices. If your network does not have a DHCP server the network camera will use 192.168.0.90 as

the default IP address.

If you would like to assign a static IP address, the recommended method in Windows is either AXIS

IP Utility or AXIS Camera Management. Depending on the number of cameras you wish to install,

use the method that best suits your purpose.

Both of these free applications can be downloaded from www.axis.com/techsup

Notes:

• If assigning the IP address fails, check that there is no firewall blocking the operation.

• For other methods of assigning or discovering the IP address, e.g. in other operating systems, see

page 15.

Method Recommended for Operating system

AXIS IP Utility

See page 11

Single camera

Small installations

Windows

AXIS Camera Management

See page 12

Multiple cameras

Large installations

Installation on a different subnet

Windows 2000

Windows XP Pro

Windows 2003 Server

Windows Vista

AXIS Q1910/Q1910-E Installation Guide Page 11

ENGLISH

AXIS IP Utility - single camera/small installation

AXIS IP Utility automatically discovers and displays Axis devices on your network. The application

can also be used to manually assign a static IP address.

Note that the computer running AXIS IP Utility must be on the same network segment (physical

subnet) as the network camera.

Automatic discovery

1. Check that the network camera is connected to the network and that power has been applied.

2. Start AXIS IP Utility.

3. When the camera appears in the window, double-click it to open its home page.

4. See page 13 for instructions on how to assign the password.

Assign the IP address manually (optional)

1. Acquire an unused IP address on the same network segment as your computer.

2. Select the network camera in the list.

3. Click the Assign new IP address to the selected device button and enter the IP address.

4. Click Assign and follow the on-screen instructions. Note that the camera must be restarted

within 2 minutes for the new IP address to be set.

5. Click Home Page to access the camera’s web pages.

6. See page 13 for instructions on how to set the password.

Page 12 AXIS Q1910/Q1910-E Installation Guide

AXIS Camera Management - multiple cameras/large installations

AXIS Camera Management can automatically discover multiple Axis devices, show connection

status, manage firmware upgrades and set IP addresses.

Automatic discovery

1. Check that the camera is connected to the network and that power has been applied.

2. Start AXIS Camera Management. When the network camera appears in the window, right-click

the link and select Live View Home Page.

3. See page 13 for instructions on how to set the password.

Assign an IP address in a single device

1. Select the network camera in AXIS Camera Management and

click the Assign IP button.

2. Select Assign the following IP address and enter the IP

address, subnet mask and default router the device will use.

3. Click OK.

Assign IP addresses in multiple devices

AXIS Camera Management speeds up the process of

assigning IP addresses to multiple devices, by suggesting IP

addresses from a specified range.

1. Select the devices you wish to configure (different mod-

els can be selected) and click the Assign IP button.

2. Select Assign the following IP address range and enter

the range of IP addresses, the subnet mask and default

router the devices will use.

3. Click Update. Suggested IP addresses are listed under

New IP Addresses and can be edited by selecting a

device and clicking Edit.

4. Click OK.

AXIS Q1910/Q1910-E Installation Guide Page 13

ENGLISH

Set the password

To gain access to the product, the password for the default administrator user root must be set. This

is done in the ‘Configure Root Password’ dialog, which is displayed when the network camera is

accessed for the first time.

To prevent network eavesdropping when setting the root password, this can be done via an

encrypted HTTPS connection, which requires an HTTPS certificate.

Note: HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt the traffic

between web browsers and servers. The HTTPS certificate controls the encrypted exchange of

information.

To set the password via a standard HTTP connection, enter it directly in the first dialog shown

below.

To set the password via an encrypted HTTPS connection, follow these steps:

1. Click the Create self-signed certificate button.

2. Provide the requested information and click OK. The certificate is created and the password can

now be set securely. All traffic to and from the network camera is encrypted from this point on.

3. Enter a password and then re-enter it to confirm the spelling. Click OK. The password has now

been configured.

4. To log in, enter the user name “root” in the dialog as requested.

Note: The default administrator user name root cannot be deleted.

5. Enter the password as set above, and click OK.

Note: If the password is lost, the camera must be reset to the factory default settings. See page 20.

To configure the password directly

via an unencrypted connection, enter

the password here.

To create an HTTPS connection,

start by clicking this button.

Page 14 AXIS Q1910/Q1910-E Installation Guide

Access the video stream

The Live View page of the network camera is displayed, with links to the Setup tools, which allow

you to customize the camera.

If required, click Yes to install AMC (AXIS Media Control), which allows viewing of the video stream

in Internet Explorer. You will need administrator rights on the computer to do this.

Note: To install AMC in Windows Vista and Windows 7, you must run Internet Explorer as an

administrator. Right-click the Internet Explorer icon and select Run as administrator.

Setup - Provides all the

tools for configuring the

camera to requirements.

Help - Displays

online help on all

aspects of using

the camera.

AXIS Q1910/Q1910-E Installation Guide Page 15

ENGLISH

Other methods of setting the IP address

The table below shows the other methods available for setting or discovering the IP address. All

methods are enabled by default, and all can be disabled.

Use in operating

system

Notes

AVHS Service

Connection

All To connect the camera to an AVHS server, refer to the server pro-

vider´s Installation guide. For information and help to find a local

AVHS Service Provider go to www.axis.com

UPnP™ Windows When enabled on your computer, the camera is automatically

detected and added to “My Network Places.”

Bonjour MAC OSX

(10.4 or later)

Applicable to browsers with support for Bonjour. Navigate to the

Bonjour bookmark in your browser (e.g. Safari) and click on the link

to access the camera’s web pages.

AXIS Dynamic DNS

Service

All A free service from Axis that allows you to quickly and simply

install your camera. Requires an Internet connection with no HTTP

proxy. See www.axiscam.net for more information.

ARP/Ping All See below. The command must be issued within 2 minutes of con-

necting power to the camera.

View DHCP server

admin pages

All To view the admin pages for the network DHCP server, see the

server’s own documentation.

Page 16 AXIS Q1910/Q1910-E Installation Guide

Set the IP address with ARP/Ping

1. Acquire an IP address on the same network segment your computer is connected to.

2. Locate the serial number (S/N) on the product label on the camera.

3. Open a command prompt on your computer and enter the following commands:

4. Check that the network cable is connected to the camera and then start/restart the camera, by

disconnecting and reconnecting power.

5. Close the command prompt when you see ‘Reply from 192.168.0.125: ...’ or similar.

6. In your browser, type in http://<IP address> in the Location/Address field and press Enter on

your keyboard.

Notes:

• To open a command prompt in Windows: from the Start menu, select Run... and type cmd. Click OK.

• To use the ARP command in WIndows Vista, right-click the command prompt icon and select

Run as administrator.

• To use the ARP command on a Mac OS X, use the Terminal utility in Application > Utilities.

Windows syntax: Windows example:

arp -s <IP Address> <Serial Number>

ping -l 408 -t <IP Address>

arp -s 192.168.0.125 00-40-8c-18-10-00

ping -l 408 -t 192.168.0.125

UNIX/Linux/Mac syntax: UNIX/Linux/Mac example:

arp -s <IP Address> <Serial Number> temp

ping -s 408 <IP Address>

arp -s 192.168.0.125 00:40:8c:18:10:00 temp

ping -s 408 192.168.0.125

AXIS Q1910/Q1910-E Installation Guide Page 17

ENGLISH

Unit connectors

Network - RJ-45 Ethernet connector. Supports PoE (Power over Ethernet, class 3). Using shielded

cables is recommended.

Audio in - 3.5mm input for a mono microphone, or a line-in mono signal (left channel is used from

a stereo signal).

Audio out - 3.5mm output for audio (line level), can be connected to a public address (PA) system

or an active speaker with a built-in amplifier. A pair of headphones can also be connected. A stereo

connector must be used for audio out.

RS-485/422 - two 2-pin terminal blocks for RS-485/422 serial interface used to control auxiliary

equipment, e.g. PTZ devices.

The RS-485/422 serial port can be configured in the following port modes:

• Bidirectional RS-485 half-duplex port for data transmission using

two wires, one combined RX/TX pair.

• Bidirectional RS-485 full-duplex port for data transmission using

four wires, one RX pair and one TX pair.

• Unidirectional RS-422 port for transmitting or receiving data using

two wires, RX- or TX pair.

• Bidirectional RS-422 full-duplex port for data transmission (point-to-point) using four

wires, one RX pair and one TX pair.

SDHC memory card slot - High capacity SD memory card used for local recording and removable

storage.

Power - 3-pin terminal block 8-20 VDC or 20-24 VAC

Function Pin Notes

RS 485/422TX(A) 1 TX pair for RS-422 and 4-wire RS-485

RS 485/422TX(B) 2

RS-485A alt RS-485/422RX(A) 3 RX pair for all modes (combined RX/TX for 2-wire RS-485)

RS-485B alt RS-485/422RX(B) 4

!CAUTION! - Incorrect connection of the wires could cause damage to the camera.

4

321

RS-485/422

RX/TX TX

DC

AC

Page 18 AXIS Q1910/Q1910-E Installation Guide

I/O terminal connector - Used in applications for e.g. motion detection, event

triggering, time lapse recording and alarm notifications. In addition to an

auxiliary power and a GND pin, the network camera has 2 pins that can be

configured as either input or output. These pins provide the interface to:

• Transistor output - For connecting external devices such as relays and

LEDs. Connected devices can be activated by AXIS VAPIX API, output

buttons on the Live View page or by an Event Type. The output will show as active (shown

under Events > Port Status) if the alarm device is activated.

• Digital input - An alarm input for connecting devices that can toggle between an open and

closed circuit, for example: PIRs, door/window contacts, glass break detectors, etc. When a

signal is received the state changes and the input becomes active (shown under

Events > Port Status.)

Function Pin number Notes Specifications

GND 1 Ground

3.3V DC

Power

2 Can be used to power auxiliary equipment.

Note:

This pin can only be used as power out.

Max load = 250mA

Configurable

(Input or

Output)

3 - 4 Digital input - Connect to GND to activate, or

leave floating (or unconnected) to deactivate.

Min input = - 40V DC

Max input = + 40V DC

Digital output - Uses an open-drain NFET

transistor with the source connected to GND.

If used with an external relay, a diode must

be connected in parallel with the load, for

protection against voltage transients.

Max load = 100mA

Max voltage = + 40V DC

4321

I/O

AXIS Q1910/Q1910-E Installation Guide Page 19

ENGLISH

Connection diagram

LED indicators

LED Color Indication

Network Green Steady for connection to a 100 Mbit/s network. Flashes for network activity.

Amber Steady for connection to 10 Mbit/s network. Flashes for network activity.

Unlit No network connection.

Status Green Steady green for normal operation.

Note: The Status LED can be configured to be unlit during normal operation, or to

flash only when the camera is accessed. To configure, go to Setup > System

Options > LED. See the online help files for more information.

Amber Steady during startup, during reset to factory default or when restoring settings.

Red Slow flash for failed upgrade.

Power Green Normal operation.

Amber Flashes green/amber during firmware upgrade.

3.3 V max 250 mA

1

2

3

4

E.g. push button

D

S

G

I/O configured as input

I/O configured as output

3.3V

Page 20 AXIS Q1910/Q1910-E Installation Guide

Resetting to the Factory Default Settings

This will reset all parameters, including the IP address, to the Factory Default settings:

1. Disconnect power from the camera.

2. Press and hold the Control button and reconnect power.

3. Keep the Control button pressed until the Status indicator displays amber (this may take up to

15 seconds).

4. Release the Control button. When the Status indicator displays green (which can take up to 1

minute) the process is complete and the camera has been reset.

5. Re-assign the IP address, using one of the methods described in this document.

It is also possible to reset parameters to the original factory default settings via the web interface.

For more information, please see the online help or the user’s manual.

Accessing the camera from the Internet

Once installed, your network camera is accessible on your local network (LAN). To access the

camera from the Internet, network routers must be configured to allow incoming traffic, which is

usually done on a specific port.

• HTTP port (default port 80) for viewing and configuration

• RTSP port (default port 554) for viewing H.264 video streams

Please refer to the documentation for your router for further instructions. For more information on

this and other topics, visit the Axis Support Web at www.axis.com/techsup

Further information

The user’s manual is available from the Axis Web site at www.axis.com.

Tip!

Visit www.axis.com/techsup to check if there is updated firmware available for your network

camera. To see the currently installed firmware version, see Setup > About.

La page charge ...

Axis Q1910 Guide d'installation

Ce manuel convient également à

Axis Q1910 Guide d'installation

dans d''autres langues

Documents connexes

Autres documents