EarFun Air 2 True Wireless Earbuds Manuel utilisateur

Catégorie
Casques mobiles
Taper
Manuel utilisateur
EarFun Air 2
True Wireless Earbuds
01
12
23
34
45
56
繁体中文
Polski
01
Equalizer tuning, customizing touch controls
Firmware updates, earbuds and charging case battery status
Less data tracking, personalized device name
Built-in feedback, and more
Note:
1.Please choose the suitable ear tip for the best sound and secure fit.
2.Select the left or right earbud and insert to the corresponding ear.
3.Rotate the earbud back and forth for the ear tip to create a comfortable seal.
How to Fit
EarFun Audio App
Download the EarFun Audio app for an enhanced experience.
2
1
1.Choose the best-sized ear tip 3.Rotate
Download on the Download on the
EN
2.Insert
S
XS
M
L
Please update your earbuds firmware to the latest version via the EarFun Audio App
for the best user experience. If earbuds can't connect to the app, reinstall or update
the app in the app store.
EarFun Air 2 Charging Case
User ManualUSB-C Cable
Ear Tips (XS, S, M, L)
What’s in the Box
3
02
Earbuds LED indicator Microphone
USB-C charging port Charging case
Touch control zone
Charging contactors
Charging case button Battery level indicators
Product Diagram
4
03
1.First-time Pairing with Device
Step 1. Remove the insulating film on both earbuds.
Step 2. Put both earbuds back into the charging case and close the
charging case.
Step 3: Open the charging case, and the earbuds will automatically
power on and enter into pairing mode.
Step 4: Activate Bluetooth on your Bluetooth-enabled device and
search for other Bluetooth devices.
Step 5: Select “EarFun Air 2” from the list of Bluetooth devices shown
(if a password is needed, type ‘0000’).
The earbuds will automatically connect with the previously paired device
when the case is open.
Each earbud could be used independently.
Notes:
Pairing Your Earbuds
5
EarFun Air 2
Insulating film
04
Step 1. Unpair the earbuds from the Bluetooth-enabled device that’s connected. The earbuds
will disconnect from the current device and go into pairing mode to be paired again.
Step 2. Search on the new device and connect.
Option A
2. Connect to a New Device
EarFun Air 2 EarFun Air 2
Step 1. Put both earbuds back into the charging case and make sure they are being charged, keep
the cover open and then press and hold the charging case button for 3 seconds until the
LED indicators on earbuds start flashing blue rapidly.
Option B
Step 2. Search on the new device and connect.
EarFun Air 2
Flashing blue rapidly
3s
05
3. Pairing and Connecting two Bluetooth devices simultaneously
Step1. Pair with the first device and stay connected
Step2. Keep the earbuds in the charging case, then press and hold the charging case button for
3 seconds until the LED indicator on earbuds flash blue rapidly. The earbuds will enter
pairing mode and will disconnected from the first device.
Step3. Search on the second device to connect the earbuds.
Step4. Manually reconnect the earbuds on the first device.
· Open the charging case, the earbuds will automatically power on.
· Place the earbuds back into the charging case and close the case, then the earbuds will
automatically power off.
1 2 3 4
Device A Device B
OTHER DEVICE
EarFun Air 2
Device A
OTHER DEVICE
EarFun Air 2
Flashing blue rapidly
3s
Note:
The earbuds will automatically connect to both devices after finishing setting up
the multipoint connection.
Functions
6
Note:
If the earbuds are not connected to any device, they will automatically power off after 10
minutes for saving the battery life.
Power on Power off
06
Playing music
Hands free conversation
Play/Pause
Tap twice (L/R)
Next track
Tap triple (R)
Volume up
Tap once (R)
Previous track
Tap triple (L)
Volume down
Tap once (L)
x2
x3
x1
x3
x1
Tap twice (L/R)
Answer/End a call
Tap and hold for 2s (L/R)
Reject a call
Tap triple (L/R)
Answer and transfer two calls
07
Tap and hold for 2s (L/R)
Voice assistant
Activate the voice assistant
Game Mode: Please enable in EarFun Audio app
Power on Blue indicator flashes for 1s
Power off Red indicator flashes for 1s
Factory reset Indicator flashes in purple
Pairing mode Indicator flashes blue
Successfully connected Indicator turns off
Earbuds LED Indicator
7
If you fail to establish a connection between two earbuds or between the earbuds and
Bluetoothdevices, please try the following steps:
Reset and Reconnecting
8
1. Put both earbuds into the charging case.
2. Keep the charging case open, then press and hold the button on the case for at least 8s
until both earbuds flash purple. The earbuds have been reset successfully.
3. Delete the previous connection from the Bluetooth device and reactivate Bluetooth to
reconnect “EarFun Air 2”.
08
Flashing purple rapidly
8s
EarFun Air 2
OTHER DEVICE
EarFun Air 2
EarFun Air 2 EarFun Air 2
1. Dry the earbuds, charging contactors and USB port completely before charging.
2. Open or close the charging case to activate the case battery level LED indicator.
3. Put earbuds back into the charging case and the earbuds will start charging.
4. Fully charge both the earbuds and the charging case before first use.
Charging
9
Battery level
Green 30%-100%
Orange 10%-30%
Red <10% Please charge
Wireless charging supported ( Wireless charging pad not included )
Red – Charging
Green – Charging complete
09
40mAh x 2(earbuds); 400mAh(charging case)
1 hour(for earbuds)
2 hours(for charging case via USB-C)
3.5 hours(for charging case via wireless charger)
62.1mm x 47.5mm x 25mm
45g
2.402GHz-2.480GHzBluetooth frequency
Bluetooth profile A2DP, AVRCP, HFP, HSP
V5.3
Bluetooth transmitted power
Maximum working range
Battery capacity
Charging time
Playtime
Input
Dimensions
Weight
Bluetooth version
<7dBm (for EU)
15m(without obstacle)
5V 1A
Up to 7.5 hours, Totally 33 hours with the charging case
(varies by volume level and audio content)
Specifications
10
Q: Can I use both earphones separately?
A: Yes, each earbud can be used independently.
Troubleshooting
11
10
Q: The earphones are turning on, but it doesn’t connect to my device?
A: To connect the earbuds to your device, please ensure the insulating films on both earbuds
were removed first, then check if the Bluetooth is enabled. If the earbuds still don't connect
to your device, please perform a reset or contact our customer support.
Q: Why is the connection not stable and cuts out intermittently?
A: Please make sure there are no objects between the earphones and your Bluetooth device
and make sure there is no radio or WIFI interference nearby.
Q: What is the range of Bluetooth earphones?
A: Bluetooth earphones have maximum range of 49 feet (15m, no obstacle). However, the
actual range will depend on usage and environment.
Q: Is there volume control on the earphones?
A: Yes, 1x tap on the left earbud decreases the volume and 1x tap on the right earbud increases it.
Q: My earphones will not switch on.
A: Please recharge them and make sure they have enough battery power. If they are fully
charged and still nothing happens or if you are not able to charge them, please contact
our customer support.
Q: Is the charging case waterproof?
A: No, the earbuds are sweat and waterproof but the charging case is not.
Q: Will the earbuds shut off automatically?
A: The earbuds will stay on as long as they are connected to a device. If no audio is playing,
they will enter power-saving mode and wake up once audio playback resumes. If the
earbuds are not connected to any devices they will automatically power off after 10 minutes.
Customer Service
For FAQS and more information:
Please send an email to: service@myearfun.com
www.myearfun.com
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
FCC Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
RF Exposure Compliance
Risk of explosion if the battery is replaced by an incorrect type
Disposal of a battery into fire or a hot even, or mechanically crushing or cutting of a battery,
that can result in an explosion;
Leaving a battery in an extremely high temperature surrounding environment that can result
in an explosion or the leakage of flammable liquid or gas;
A battery subjected to extremely low air pressure that may result in an explosion or the
leakage of flammable liquid or gas.
CAUTION
Other trademarks and trade names are those of their respective owners.
Earfun Technology (HK) Limited hereby declares that this equipment is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU and RoHS
2011/65/EU Directive. The declaration of conformity may be consulted in the support section of
our Web site, accessible from www.myearfun.com
EU Declaration of Conformity
Hereby, [Earfun Technology (HK) Limited] declares that the radio equipment type [TW210] is in
compliance with UK Radio Equipment Regulations (SI 2017/1206). The full text of the declaration
of conformity is available at the following internet address: www.myearfun.com
UK Declaration of Conformity
取得審驗證明之低功率射頻器材,非經核准,公司、商號或使用者均不得擅自變更頻率、
加大功率或變更原設計之特性及功能。低功率射頻器材之使用不得影響飛航安全及干擾
合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。前述
合法通信,指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通信或
工業、科學及醫療用電波輻射性電機設備之干擾。
NCC聲明:
To prevent possible hearing damage, do not listen at high volume levels for long periods.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by Earfun Technology (HK) Limited is under license.
BLUETOOTH
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un
environnement non contrôlé.
ISED Compliance Statements
型號/MODEL: TW210
210-218081
FCC ID: 2AVIT-TW210 HVIN: TW210 IC: 25936-TW210
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17

EarFun Air 2 True Wireless Earbuds Manuel utilisateur

Catégorie
Casques mobiles
Taper
Manuel utilisateur

dans d''autres langues