Panasonic cq-dfx883n Le manuel du propriétaire

Marque: Panasonic

Modèle: cq-dfx883n

Catégorie: Lecteur CD

Taper: Le manuel du propriétaire

Ce manuel convient également à

CQDFX883N

Removable Full Front MP3 WMA CD Player/Receiver with CD Changer Control

CQ-DFX883N

¡Please read these instructions carefully before using this product and keep this manual for future reference.

¡Bitte lesen Sie diese Bedienungsanleitung vor der Verwendung dieses Produktes aufmerksam durch und bewahren Sie sie danach

für spätere Nachschlagzwecke sorgfältig auf.

¡Prière de lire ces instructions attentivement avant d’utiliser le produit et garder ce manuel pour l’utilisation ultérieure.

¡Leest u deze instructie alstublieft zorgvuldig door voor u dit product in gebruik neemt en bewaar deze handleiding voor later gebruik.

¡Läs igenom denna bruksanvisning noga innan produkten tas i bruk. Spara bruksanvisningen för framtida behov.

¡Si prega di leggere attentamente queste istruzioni prima di usare questo prodotto e di conservare questo manuale per usi futuri.

¡Lea con atención estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el futuro.

Operating Instructions

Bedienungsanleitung

Manuel d’instructions

instructions

Gebruiksaanwijzing

Bruksanvisning

Manuale di istruzioni

Manual de Instrucciones

Operating Instructions

Bedienungsanleitung

Manuel d’instructions

Gebruiksaanwijzing

Bruksanvisning

Manuale di istruzioni

Manual de Instrucciones

CQ-DFX883N

OPEN

YEFM283963 ND1202-1023 Printed in China

Matsushita Electric Industrial Co., Ltd.

Web Site: http://www.panasonic.co.jp/global/

TEXT

CQ-DFX883N

English

Panasonic welcomes you to their constantly growing family of electronic products owners.

We endeavor to give you the advantages of precise electronic and mechanical engineering,

manufactured with carefully selected components, and assembled by people who are proud

of the reputation their work has built for our company. We know this product will bring you

many hours of enjoyment, and after you discover the quality, value and reliability we have

built into it, you too will be proud to be a member of our family.

¡Before Use 4

¡Names 6

¡Frequently-used Operation 7

¡Radio Basics 10

¡Radio Data System (RDS)

in FM Broadcasting 13

¡CD Player 18

¡MP3/WMA Player 20

¡CD Changer Control 22

¡Audio Setting (AUDIO menu) 24

¡Function Setting (FUNCTION menu)

¡Display Setting (PICTURE menu) 26

¡Anti-Theft System 27

¡Troubleshooting

¡Error Display Messages 30

¡Maintenance/Fuse 31

¡Notes on MP3/WMA

■General

Power Supply

Tone Controls (Bass/Treble)

Current Consumption

Maximum Power Output

Speaker Impedance

Preout

Subwoofer-out

Dimensions (Main Unit)

Weight (Main Unit)

DC 12 V (11 V - 16 V),

Test Voltage 14.4 V, Negative Ground

Bass; ±12 dB at 100 Hz

Treble; ±12 dB at 10 kHz

Less than 2.5 A

(CD mode, 0.5 W 4-Speaker)

50 W x 4 (at 4 Ω)

22 W x 4 (DIN45 324, at 4 Ω)

4 - 8 Ω

2.5 V/200 Ω

External Input Impedance

10 kΩ (AUX IN)

External Input Sensitivity

Max. 2 V (AUX IN)

178(W) x 50(H) x 155(D) mm

1.6 kg

■Stereo Radio

Frequency Range

Usable Sensitivity

Stereo Separation

87.5 - 108 MHz

6 dB/µV(S/N 30 dB)

35 dB (at 1 kHz)

Frequency Range

Usable Sensitivity

531 - 1,602 kHz

28 dB/µV (S/N 20 dB)

Frequency Range

Usable Sensitivity

153 - 279 kHz

32 dB/µV (S/N 20 dB)

■CD Player

Sampling Frequency

DA Converter

Error Correction System

Pick-Up Type

Light Source

Wavelength

Frequency Responce

Total Harmonic Distortion

Signal to Noise Ratio

Wow and Flutte

Channel Separation

Panasonic Super Decoding

Algorithm

Astigma 3-beam

Semiconductor laser

780 nm

5 Hz - 20 kHz (±1 dB)

90 dB

0.01 % (1 kHz)

Below measurable limits

70 dB

8 times oversampling

MASH 1 bit/4 DAC System

Specifications

● Specifications and design are subject to modification with-

out notice due to improvements.

Note

Power Output

DeutschFrançaisNederlandsSvenskaItalianoEspañol

Contents

Refer to the Installation Instructions

supplied separately for installation and wiring.

CQ-DFX883N Removable Full Front MP3 WMA CD Player/Receiver

with CD Changer Control

Sub-Woofer

(Up Grade)

CD Changer: CX-DP9061EN

(Up Grade)

CQ-DFX883N

Head unit

Stereo/Mono

Power Amplifier CY-M7052EN

(Up Grade)

4 channel Power Amplifier

CY-M9054EN (Up Grade)

Dual CD changer selector: CA-CD55EN

(Up Grade)

Delightful sound space thanks

to system buildup

www.panasonic.co.uk (for UK customers only)

¡Order accessory and consumable items for your

product with ease and confidence by telephoning

our Customer Care Centre Mon–Friday

9:00am–5:30pm. (Excluding public holidays.)

¡Or go on line through our Internet Accessory order-

ing application.

¡Most major credit and debit cards accepted.

¡All enquiries transactions and distribution facilities

are provided directly by Panasonic UK Ltd.

¡It couldn’t be simpler!

Customer Care Centre

For UK customers: 08705 357357

For Republic of Ireland customers: 01 289 8333

ACC Setting

(Default: OFF)

English

CQ-DFX883N

Warning

Laser Product

Before Use

■ Volume Level For your driving safety, keep the volume level low enough to be aware

of road and traffic conditions.

■ Car Washing To avoid electrical shorts which may cause fire, or other damage, do

not expose this product (including the speakers and CDs) to water or

excessive moisture.

■ Car Ventilation If your car is parked for several hours in direct sunlight, the tempera-

ture inside the car may become very high. It is advisable to drive the

car and give the interior a chance to cool down before switching the

unit on.

■ Power Supply This product is designed to be used in a car having a 12-Volt negative

ground battery system.

■ Disc Mechanism Do not insert coins or any small objects. Keep screwdrivers and other

metallic objects away from the disc mechanism and disc.

■ Service This product is made of precision parts. Do not attempt to disassemble

or adjust any parts. For repair, please consult your nearest authorized

Panasonic Service Center.

Note: The preset memory is cleared to return to the original factory setting when the power con-

nector or battery is disconnected.

q Pull out the battery case while

pushing the tab.

w Put a battery in the case with

(+)-side facing up.

e Put the case back.

■ Battery Notes

¡Remove and dispose of an old battery immediately.

¡Battery Information:

Battery Type: Panasonic lithium battery (CR2025)

(Included)

Battery Life: Approximately 6 months under normal use

(at room temperature)

¡ Do not disassemble or short the battery. Do not throw a

battery into a fire.

¡ Keep batteries away from children to avoid the risk of

accidents.

¡ Follow local regulations when disposing of batteries.

Caution: Improper use of batteries may cause overheat-

ing, an explosion or ignition, resulting in injury or a fire.

OFF

ACC

IGN

For a ACC-equipped car, select ON. (a Page 25) The following functions are available.

¡ The power is turned on automatically when inserting a disc or magazine.

¡ The clock can be displayed even if the power is off. (a page 9)

¡ After the security function (a page 25) is set to ON, the function works when turning the ignition

key to OFF.

Additionally, the functions with mark in this book are available.

Caution:

Be sure to select OFF when your car has no ACC position in the ignition switch.

Failure to do this could cause the battery to go dead.

ACC ON

REPSCANRAND

POWER MENU

NUMBER

Car Audio

VOL

SOURCE

SET

SEL

MUTE

BAND DISP

1 2 3

4 5 6

7 8

XXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXX

XXXXXXXXXXXXXXXX

OO-OOOOO

Remote Control Unit

(a Page 6)

1 1 set 1

Lithium Battery

(CR2025)

Operating Instructions Installation Instructions Warranty Card

Supplied Hardware (1 set)

(Refer to Installation Instructions.)

Removable Face Plate

Case

VARO! AVATTAESSA

OLET ALTTIINA LASER-

SÄTEILYLLE.

ÄLÄ TUIJOTA

SÄTEESEEN.

VARNING LASERST-

RÅLNING NÄR DENNA

DEL ÄR ÖPPNAD.

STIRRA EJ IN I

STRÅLEN.

ADVARSEL LASERS-

TRÅLING NÅR DEKSEL

ÅPNES.

STIRR IKKE INN I

STRÅLEN.

Label Indications and Their Locations

Caution: This product utilizes a laser.

Use of controls or adjustments or performance of

procedures other than those specified herein may

result in hazardous radiation exposure.

Laser products:

Wave Length 780 nm

Laser Power No hazardous radiation is emitted with

safety protection.

Do not take apart this unit or attempt to make

any changes yourself.

This unit is a very intricate device that uses a laser

pickup to retrieve information from the surface of com-

pact discs. The laser is carefully shielded so that its

rays remain inside the cabinet.

Therefore, never try to disassemble the player or alter

any of its parts since you may be exposed to laser rays

and dangerous voltages.

CLASS 1 LASER PRODUCT

Caution Label

Deck Ass’y

(Upper Side)

¡APPREIL À LASER DE CLASSE

¡KLASS 1 LASER APPARAT

¡LUOKAN 1 LASERPLAITE

CAUTION LASER RA-

DIATION WHEN OPEN.

DO NOT STARE INTO

BEAM.

VORSICHT LASERST-

RAHLUNG, WENN ABD-

ECKUNG GEÖFFNET.

NICHT IN DEN STRAHL

BLICKEN.

ATTENTION RAYON-

NEMENT LASER EN

CAS D'OUVERTURE.

NE PAS REGARDER

DANS LE FAISCEAU.

ADVARSEL LASERS-

TRÅLING VED ÅBNING.

SE IKKE IND I

STRÅLEN.

Accessories

Battery into

Remote

Control

qwer

tyu

CAUTION

LASER RADIATION

WHEN OPEN. DO NOT

STARE INTO BEAM.

Power on: Press (PWR Power).

Power off: Hold down (PWR Power) for 1 sec. or more.

Note: The demonstration message appears for first use.

To clear the demonstration message, press (DISP Display).

To display the demonstration message, hold down

(PWR Power) for 4 sec. or more to turn the

power on.

ACC ON

CQ-DFX883N

Frequently-used Operation

This chapter explains how to turn on or off the power, how to adjust the volume, etc.

English

The source changes as follows every time (SOURCE) is pressed.

CQ-DFX883N

Names

REPSCANRAND

POWER MENU

NUMBER

Car Audio

VOL

SOURCE

SET

SEL

MUTE

BAND DISP

1 2 3

4 5 6

7 8

(Demonstration display)

Radio

FM1, FM2, FM3, AM (MW/LW)

(a Page 10)

Player

CD-DA, MP3, WMA

Depends on the loaded disc

(a Page 18, 20)

CD Changer (sold separately)

Selectable only when a CD changer is

connected

(a Page 22)

Auxiliary

Sound source connecting to the AUX

input terminal

(a Installation Instructions)

Functions only by remote control unit

One-touch operation is available for selecting a track playing style by use of (

RAND

Random),

(

SCAN

), or (

REP

Repeat). (For a Folder/Disc playing style, hold

down the same button for 2 sec. or more.)

■

Direct Access

A track (CD mode), disc (CD changer), file and folder (MP3/WMA mode) can be directly selected.

Example: File number 5

q Press (# NUMBER).

w Press .

e Press (SET).

Notes:

¡ For folder selection, enter a number after pressing (# NUMBER) twice.

¡ To suspend direct selection, press (DISP Display).

NUMBER

SET

BAND

NUMBER

REP

SCAN

RAND

q POWER

SOURCE

w MUTE

S·HDB

e BAND

SET

r SEL Select

t VOL Volume

}:Up

{:Down

y Number Buttons

0 to 9

# Number

4 RAND Random

5 SCAN

6 REP Repeat

]7, 9[ Tune/Track/File

}8, 0{ Disc/Folder

u DISP Display

(Direct Access display)

CQ-DFX883N

OPEN

Remote

Control Unit

Note:

This instruction manual

explains operations for

use with the buttons on

the main unit. (Different

operations excluded)

Power On/off

(Power)

Source

Selection

(Source)

SOURCE

PWR Power

MUTE (ATT Attenuation)

S·HDB

Super High Definition Bass

DIM Dimmer

AF Alternative Frequency

PTY Program Type

OPEN

TA Traffic

Announcement

VOL Volume

PUSH SEL Select

P·SET Preset

DISC

FOLDER

DISP Display

Play/Pause

BAND

SET

APM

Auto Preset Memory

TUNE

TRACK

FILE

Remote Control Sensor

English

CQ-DFX883N

Frequently-used Operation

q Up

w Down

Note:

The volume level can be set independ-

ently for each source. (For radio, one

volume setting for AM, one volume

setting for all FMs)

Volume off (down): Press (MUTE).

lights.

Cancel: Press (MUTE) again.

Note:

Volume-down range can be specified. (

Page 25)

VOL volume

Setting Range: 0 to 40

(Volume adjusting display)

(Muting display)

The S•HDB level changes as follows every time (S•HDB Super High Definition Bass) is held

down for 2 sec. or more.

OFF (Default)

The bass sound of the speakers is strongly empha-

sized.

The bass sounds of the speakers are mod-

erately emphasized.

(S•HDB on display)

S•HDB indicator

The dimmer level changes as follows every time (DIM Dimmer) is pressed.

Brighter (Default)

Medium

Darker

Select the radio AM mode.(a Page 10)

Press and hold (DISP Display) for more than 2 seconds.

Press (]) or ([) to adjust HOUR.

Press (DISP Display) to confirm the adjustment.

Forward: ([)

Back: (])

Press (]) or ([) to adjust MINUTE.

Press (DISP Display) to confirm the adjustment.

Forward: ([)

Back: (])

Note:

When a broadcast of FM Radio Data System is received, the clock is put right automatically by the

Clock Time service. (a Page 16)

Pressing (DISP Display) toggles Clock display on and off.

Clock display (default)

Volume

Adjustment

(Volume)

Temporary

Volume Off

(Down)

Mute

(Attenuation)

Bass

Enhancement

(S·HDB)

Dimmer

Control

(Dimmer)

Clock

adjustment

Clock display at

power off

(Display)

ACC ON

Note:

Adjust the clock when

“NO CT” appears on the

display.

CQ-DFX883N

Up to 6 stations can be preset in AM, FM1, FM2, and FM3 respectively.

Preset stations can be simply called up by pressing (P·SET Preset}) or

(P·SET Preset{).

Note: Direct selection can be executed with remote control buttons ~ .

Auto Preset Memory (APM)

Select a band.

Hold down (APM Auto Preset Memory) for 2 sec. or more.

Up to 6 best receiving stations are preset.

The preset stations under best receiving conditions are received for 5 sec. each after presetting

the stations (SCAN). To stop scanning, press (P·SET Preset}) or

(P·SET Preset{).

Notes:

¡ New stations overwrite existing saved stations.

¡ Only RDS stations will be saved at default setting (AF ON). To select non RDS stations too, set AF

OFF. (a Page 13)

Manual station preset

Tune in to a station.

Hold down (P·SET Preset}) or (P·SET Preset{) for 2

sec. or more.

Select a preset number by pressing (P·SET Preset}) or

(P·SET Preset{).

Preset the station by holding down (P·SET Preset}) or

(P·SET Preset{)for 2 sec. or more.

Frequency/preset number blinks once.

Notes:

¡ New stations overwrite existing saved stations.

¡ In step 2, a station can be registered by holding down the numeric button ~ 2 sec. or

more.

¡ To stop presetting stations, press (DISP Display).

English

CQ-DFX883N

Radio Basics

This chapter explains how to listen to the radio.

CQ-DFX883N

OPEN

Press (SOURCE) to select the radio

mode.

Press (BAND) to select a band.

Select a station

Station search

Lower: Hold down (TUNE]) for 0.5 sec. or more

then release it.

Higher: Hold down (TUNE[) for 0.5 sec. or more

then release it.

Frequency adjustment

Lower: Press (TUNE]).

Higher: Press (TUNE[).

Preset station selection

Lower preset number:

Press (P·SET Preset{).

Higher preset number:

Press (P·SET Preset}).

Note: Direct selection can be executed with to

buttons on remote control.

STEREO/MONO (Monaural) Indicator

Operation Flow

Notes:

For tuning in on only stations whose receiving condi-

tions are good in the station search, set LOCAL to ON.

(

a Page 12)

¡ For reducing noise when a receiving FM stereo wave is

weak, set FM MONO to ON. (

a Page 12)

Preset number

Radio mode display

Band

Frequency

LOCAL Indicator

Preset Number

Display change

Press (DISP) to change.

CT Clock Time

Normal

Often-tuned

Station Preset

(Preset)

CQ-DFX883N

English

CQ-DFX883N

Radio Basics

Press (MENU) to display the menu display.

For using the remote control, hold down (MENU) for 2 sec. or more.

Press (}) or ({) to select a mode to be adjusted.

Press (SET) to confirm the function.

Press (}) or ({) to switch on and off.

Press (SET).

Press (MENU) to confirm the adjustment.

For using the remote control, hold down (MENU) for 2 sec. or more.

MONO (Monaural)

Noise reduction when the receiving sensitivity becomes low

: Receiving in stereo (Default)

: Receiving in mono and reducing the noise level (

lights.)

LOCAL

Setting when searching for a station

: Searching even for a relatively low-intensity radio wave sta-

tion (Default)

: Searching only for a high-intensity radio wave station

( lights.)

SEL

Radio Data System (RDS) in FM Broadcasting

Useful functions such as AF, TA, PTY, etc. are available in the RDS (Radio Data System)-ready areas.

CQ-DFX883N

OPEN

AF (Alternative Frequency) ON/OFF

(a Page 14)

When receiving conditions become bad, a station broad-

casting the same program with better receiving conditions

is automatically tuned in to. (Default: ON)

Holding down (AF) for 2 sec. or more toggles AF on

and off.

Note: This operation is not adjustable by the remote con-

trol.

TA (Traffic Announcement) ON/OFF

(a Page 14)

TP (Traffic Program) can be preferentially received.

(Default: OFF)

Pressing (TA) toggles TA on and off.

PTY (Program Type) ON/OFF

(a Page 15)

A station can be specified by a genre instead of a frequen-

cy.

Holding down (PTY) for 2 sec. or more toggles PTY

mode on and off.

Note: This operation is not adjustable by the remote con-

trol.

Notes:

¡ The PTY language can be selected. (a Page 17)

¡ Refer to page 16 for other RDS functions.

TA receiving display

(AF toggling display)

AF indicator

(PTY on display)

PTY mode indicator

(TA on display)

TP indicator

Lights up while receiving a TP station

(that broadcasts TA).

Receiving station PTY

Program Service Name

TAon Indicator

AF Indicator

TAon indicator

Display change

Press (DISP) to change.

Frequency

CT Clock Time

MONO/LOCAL

Setting

Note: In AM mode, only

LOCAL can be selected.

English

CQ-DFX883N

AF (Alternative Frequency)

The following functions are available when the AF mode is active (a page 13).

• When receiving conditions become bad, a station with better receiving conditions is automatically tuned in to.

• When executing APM, only RDS stations are selected.

• When calling up a preset station, a best receiving station is selected automatically.

Notes:

• The AF sensitivity can be adjusted. (a page 17)

• The AF available range can be adjusted. (a page 17)

If reception becomes poor when tuning in a preset station, press the same preset number button.

The same station with better reception will be searched for. (BSR Best Stations Research).

Another station broadcasting the same program is searched for if a station with an appropriate fre-

quency cannot be found even by means of BSR. (PI Seek Program Identification Seek)

Note: For PI Seek, cancel the TA mode first, then

execute PI Seek.

(PI seeking display)

TA (Traffic Announcement)

The following functions are available when the TA mode is active(a page 13).

¡ A TP station is automatically searched for and received at the instant of toggling the TA mode on if you

are receiving a non-TP station.

¡ When executing station search or APM, only TP stations are selected.

¡ Once traffic information starts, the TA mode is automatically selected even while the unit is set to other

modes such as the CD mode. The traffic announcement is broadcast at the TA volume level.

For listening to only traffic information, activate TA and set the volume to 0 in FM mode.

Once traffic information starts, the volume changes to the TA volume.

The TA volume is adjustable.

Hold down (TA) for 2 sec. or more while receiving an FM broadcast.

The current volume becomes the TA volume.

(TA volume adjusting display)

Programs can be searched for by use of PTY that has been originally preset.

Press (P•SET Preset}) or (P•SET Preset{) to select

PTY in the PTY mode.

Another station in the same PTY is searched for by pressing (SET).

Preset No. Program Type Contents

1 NEWS NEWS

2 SPEECH AFFAIRS, INFO, EDUCATE, DRAMA, CUL-

TURE, SCIENCE, VARIED, WEATHER,

FINANCE, CHILDREN, SOCIAL, RELIGION,

PHONE IN, TRAVEL, LEISURE, DOCU-

MENT

3 SPORT SPORT

4 POP M POP M

5 CLASSICS CLASSICS

6 MUSIC ROCK M, EASY M, LIGHT M, OTHER M,

JAZZ, COUNTRY, NATION M, OLDIES,

FOLK M

Notes:

¡ Direct selection can be executed with remote control buttons ~ .

¡ When there is no corresponding program type station, “NONE” is displayed.

¡ A desired PTY appears for 5 seconds.

¡ Preset contents are changeable. (a Page 16)

Radio Data System (RDS) in FM Broadcasting

PTY (Program Type)

The following functions are available when the PTY mode is active (a Page 13).

¡ The PTY of receiving station appears.

¡ Programs can be searched for by PTY.

Note: PTY language can be selected (a Page 17).

(PTY searching display)

Manual AF

Function

(BSR and PI Seek)

TA Volume

Adjustment

(TA Volume)

Traffic

Information

Only

(TA Mute)

Program

Search by PTY

(PTY Preset

Search)

CQ-DFX883N

Radio Data System (RDS) in FM Broadcasting

Press (TUNE]) or (TUNE[) to select PTY.

Press (SET).

Search starts.

Notes:

¡ To stop searching, press (SET).

¡ When there is no corresponding program type station, “NONE” is displayed.

English

CQ-DFX883N

SPEECH / MUSIC / NEWS / AFFAIRS /

INFO / SPORT / EDUCATE / DRAMA /

CULTURE / SCIENCE / VARIED / POP M /

ROCK M / EASY M / LIGHT M / CLASSICS /

OTHER M / WEATHER/ FINANCE / CHILDREN /

SOCIAL / RELIGION / PHONE IN / TRAVEL /

LEISURE / JAZZ / COUNTRY / NATION M /

OLDIES / FOLK M / DOCUMENT

(PTY searching display)

Original PTY presets can be changed as you like.

Select a PTY that you would like to preset.

Follow the procedure of ordinary pre-

setting. (a Page 11)

(Preset changing display)

Other functions of RDS

■ CT (Clock Time)

The clock is automatically adjusted.

■ PS (Program Service Name)

As well as the frequency, the name of the broadcast station appears.

■ EON (Enhanced Other Network)

RDS information is updated constantly in response to the current position.

■ EON-TA

Traffic information from the current and other network stations can be received.

■ Emergency Announcement Reception

Emergency announcement automatically appears on the display when it is received.

(EON receiving display)

(Emergency announcement receiving display)

EON indicator

Press (MENU) to display the menu display.

For using the remote control, hold down (MENU) for 2 sec. or more.

Press (}) or ({) to select a mode to be adjusted.

Press (SET) to confirm the function.

Press (}) or ({) to adjust the setting value.

Press (SET).

Press (MENU) to confirm the adjustment.

For using the remote control, hold down (MENU) for 2 sec. or more.

AF SEL

Adjusting the AF sensitivity

AF 1: Switching immediately after the receiving sensitivity becomes low (for a suburban area

with a fine view) (Default)

AF 2: No switching even after the receiving sensitivity temporarily becomes low (for an area

with a obstructed view)

REGION

Setting the AF range

REG OFF: The frequency is changed also for programs outside the region. (Default)

REG ON: The frequency is changed only for programs within the region.

SEL

Press (MENU) to display the menu display (PTY ON).

For using the remote control, hold down (MENU) for 2 sec. or more.

Press (SET) to confirm the function.

Press (}) or ({) to adjust the setting value.

ENGLISH: English (Default)

DEUTSCH: German

ESPAÑOL: Spanish

SVENSKA: Swedish

ITALIANO: Italian

FRANÇAIS: French

NEDERLAN: Dutch

Press (SET).

Press (MENU) to confirm the adjustment.

For using the remote control, hold down (MENU) for 2 sec. or more.

SEL

Detailed PTY

Selection

(PTY Search)

PTY Preset

Change

AF/REGION set-

ting

PTY language

selection

English

CQ-DFX883N

CD Player

CD-Rs and CD-RWs as well as normal CDs are playable on this unit.

CQ-DFX883N

OPEN

Press (OPEN) to open the front panel.

Load a disc with the label-side facing up

and close the panel.

When a disc is already loaded, press (SOURCE)

to select the CD mode.

The unit recognizes the disc and starts playing auto-

matically.

Notes:

¡ Do not insert a disc when indicator lights

because a disc is already loaded.

¡ The power is turned on automatically when insert-

ing a disc.

¡ To take the disc out, press the eject button.

Select a desired portion.

Track selection

Next track: Press (TRACK7).

Preceding track: Press (TRACK6) twice.

Fast forward/reverse

Fast forward: Press and hold (TRACK7).

Fast reverse: Press and hold (TRACK6).

Pause

Press (

Press again to cancel.

ACC ON

OPEN

Operation Flow

Cautions:

¡ This unit does not support 8 cm discs.

¡ Do not use irregularly shaped discs.

¡ Do not use discs that have a seal or label attached.

¡ Be sure to close the front panel while CD playback.

¡ To avoid damaging the front panel, do not push it down or

place objects on it while it is open.

¡ Do not pinch your finger or hand in the front panel.

¡ Do not insert foreign matter into the disc slots.

¡ Refer to the section on “Notes on CD/CD Media (CD-ROM,

CD-R, CD-RW)” (a Page 31).

¡ For a disc that contains both CD-DA data and MP3/WMA

data, the unit plays CD-DA data first and MP3/WMA data

next collectively in recorded order respectively. If there is a

MP3/WMA file between CD-DA files in recorded order, there

is a 5-second silent period for the MP3/WMA file spot when

the unit plays CD-DA data.

CD mode display

Eject Button

Track

Play time

DISC indicator

Display change

Press (DISP) to change.

Disc Title

Normal

Track Title

Functions only by remote control unit

One-touch operation is available for selecting a track playing style by use of (RAND Random) or (REP Repeat).

RANDOM: Press (RAND Random).

Press again to cancel.

REPEAT: Press (REP Repeat).

Press again to cancel.

■

SCAN play

You can find your favorite track by playing first 10-sec. of each track.

Press

(SCAN).

Press again to cancel.

■

Direct Access

A track can be directly selected. Example: track number 5

q Press (# NUMBER).

w Press .

e Press (SET).

Note: To suspend direct selection, press (DISP Display).

SET

BAND

NUMBER

SCAN

REP

RAND

REP

RAND

Random and Repeat play can be set.

Press (MENU) to display the menu display.

Press (}) or ({) to select a mode to be adjusted.

Press (SET) to confirm the function.

Press (}) or ({) to switch on and off.

Press (SET).

(MENU) to confirm the adjustment.

RANDOM

: Random playback ( lights.)

REPEAT

: Playing the current track repeatedly ( lights.)

(Direct Access display)

Notes:

For scrolling text, hold down (DISP Display) for 2 sec. or more.

“NO TEXT” is displayed when there is no information on the disc.

Play Mode indicators

Play Mode

Selection

(RANDOM, REPEAT)

CQ-DFX883N

English

CQ-DFX883N

MP3/WMA Player

MP3(MPEG Audio Layer 3)/WMA (Windows Media Audio) discs are playable on this unit.

CQ-DFX883N

OPEN

Folder number

Press (OPEN) to open the front panel.

Load a disc with the label-side facing up.

When a disc is already loaded, press (SOURCE)

to select the CD mode.

The unit recognizes the disc and starts playing auto-

matically.

(It may take several minutes to start for a disc that has

a lot of files.)

Notes:

Do not insert a disc when indicator lights

because a disc is already loaded.

¡ The power is turned on automatically when inserting a

disc.

¡ To take the disc out, press the eject button.

Select a desired portion.

Folder selection

Next folder: Press (FOLDER}).

Preceding folder: Press (FOLDER{).

File selection

Next file: Press (TRACK7).

Preceding file: Press (TRACK6) twice.

Fast forward/reverse

Fast forward: Press and hold (TRACK7).

Fast reverse: Press and hold (TRACK6).

Pause

Press (

Press again to cancel.

ACC ON

OPEN

Operation Flow

Notes:

¡ Refer to the section on “Notes on MP3/WMA” (a Page

32)

¡ For a disc that contains both CD-DA data and MP3/WMA

data, the unit plays CD-DA data first and MP3/WMA data

next collectively in recorded order respectively. If there is

a MP3/WMA file between CD-DA files in recorded order,

there is a 5-second silent period for the MP3/WMA file

spot when the unit plays CD-DA data.

MP3 mode display

MP3/WMA indicator

File number

Display change

Press (DISP) to change.

Functions only by remote control unit

One-touch operation is available for selecting a track playing style by use of (RAND Random) or (REP Repeat).

RANDOM, REPEAT: Press the button. Press again to cancel.

FOLDER RANDOM, FOLDER REPEAT: Hold down the button for 2 sec. or more. Hold down again to cancel.

■

SCAN play

You can find your favorite file by playing first 10-sec. of each file.

SCAN (All files): Press

(SCAN). Press again to

cancel.

FOLDER SCAN (1st file in each folder): Hold down

(SCAN) for 2 sec. or

more. Hold down again to cancel.

■

Direct Access

A file in the current folder can be directly selected. Example: file number 5

q Press (# NUMBER).

w Press .

e Press (SET).

Notes:

¡ For folder selection, enter a number after pressing (# NUMBER) twice.

¡ To suspend direct selection, press (DISP Display).

NUMBER

SET

BAND

NUMBER

SCAN

REP

RAND

Random and Repeat play can be set.

Press (MENU) to display the menu display.

Press (}) or ({) to select a mode to be adjusted.

Press (SET) to confirm the function.

Press (}) or ({) to switch on and off.

Press (SET).

(MENU) to confirm the adjustment.

RANDOM

: Random playback (disc) ( lights.)

F-RANDOM

: Random playback (folder) ( blinks.)

REPEAT

: Playing the current file repeatedly ( lights.)

F-REPEAT

: Playing the current folder repeatedly ( blinks.)

(Direct Access display)

Notes:

For scrolling text, hold down (DISP Display) for 2 sec. or more.

“NO TEXT” is displayed when there is no information on the disc.

¡ ID3/WMA tag information is displayed for the title name and

artist name.

Play time

Normal

Folder name

File name

Title name

Artist name

Play Mode indicators

Play Mode

Selection

(RANDOM, REPEAT)

English

CQ-DFX883N

CD Changer Control

Connected optional CD changer can be controlled by this unit.

CQ-DFX883N

OPEN

Load a magazine.

When a magazine is already loaded, press

(SOURCE) to select the CD changer

mode.

The unit recognizes the magazine and starts playing

automatically.

Note: The power is turned on automatically when

inserting a magazine.

Select a desired portion.

Switch between CD changers (in the case

of connecting 2 changers)

Press (SET).

Disc selection

Next disc: Press (DISC}).

Preceding disc: Press (DISC{).

Track selection

Next track: Press (TRACK7).

Preceding track: Press (TRACK6) twice.

Fast forward/reverse

Fast forward: Press and hold (TRACK7) .

Fast reverse: Press and hold (TRACK6).

ACC ON

Operation Flow

Notes:

¡ CD text is displayed when the unit is connected to a CD

changer capable of recognizing CD text (CX-DP9061EN, for

example).

¡ Not compatible with CD-RW.

¡ Trouble may occur while playing CD-Rs.Refer to the section

on “Notes on CD/CD Media (CD-ROM, CD-R, CD-RW)” (a

Page 31).

¡ Not compatible with MP3/WMA.

¡ To connect two CD changers to it, the Dual CD Changer

Selector CA-CD55EN is necessary.

CQ-DFX883N

CD changer mode display

D (Disc) number

CDCH/CDCH1/CDCH2 indicator

T (Track) number

Display change

Press (DISP) to change.

Disc Title

Normal

Track Title

Functions only by remote control unit

One-touch operation is available for selecting a track playing style by use of (RAND Random) or (REP Repeat).

RANDOM, REPEAT: Press the button. Press again to cancel.

DISC RANDOM, DISC REPEAT: Hold down the button for 2 sec. or more. Hold down again to cancel.

■

SCAN play

You can find your favorite track by playing first 10-sec. of each track.

SCAN (All tracks): Press

(SCAN). Press again to

cancel.

DISC SCAN (1st track in each disc): Hold down

(SCAN) for 2 sec. or

more. Hold down again to cancel.

■

Direct Access

A disc can be directly selected. Example: disc number 5

q Press (# NUMBER).

w Press .

e Press (SET).

Note: To suspend direct selection, press (DISP Display).

SET

BAND

NUMBER

SCAN

REP

RAND

Notes:

For scrolling text, hold down (DISP Display) for 2 sec. or more.

“NO TEXT” is displayed when there is no information on the disc.

Random and Repeat play can be set.

Press (MENU) to display the menu display.

Press (}) or ({) to select a mode to be adjusted.

Press (SET) to confirm the function.

Press (}) or ({) to switch on and off.

Press (SET).

(MENU) to confirm the adjustment.

RANDOM

: Random playback (magazine) ( lights.)

D-RANDOM

: Random playback (disc) ( blinks.)

REPEAT

: Playing the current track repeatedly ( lights.)

D-REPEAT

: Playing the current disc repeatedly ( blinks.)

(Direct Access display)

Play Mode indicators

Play Mode

Selection

(RANDOM, REPEAT)

English

Setting buttons’ functions

: Volume off (Default)

: Volume down by 10 steps

Volume adjustment when an interruption such as car navigation signal

occurs

: Volume off (Default)

: Volume down by 15 steps

: Volume down by 10 steps

: No change in volume

Setting the security function (a Page 27)

: ON (Default)

:OFF

Setting depending on your car

: ACC not equipped (Default)

: ACC equipped

CQ-DFX883N

OPEN

Press (MENU) to display the menu dis-

play.

For using the remote control, hold down (MENU) for

2 sec. or more.

Press (]) or ([) to display the

FUNCTION menu.

Press (}) or ({) to select

a function to be adjusted.

Press (SET) to confirm the function.

Press (}) or ({) to adjust

the setting value.

Press (SET).

Press (MENU) to confirm the adjust-

ment.

For using the remote control, hold down (MENU) for

2 sec. or more.

SEL

Function Setting (FUNCTION menu)

Adjustment to display on the function menu

Caution:

Be sure to select OFF when your car has no ACC position in the ignition switch. Failure to do this could

cause the battery to go dead.

CQ-DFX883N

Audio Setting (AUDIO menu)

Adjustment to each speaker and an optional subwoofer

CQ-DFX883N

OPEN

Push (SEL Select) to display the

menu display.

Push (SEL Select) to select a

mode to be adjusted.

Turn (VOL Volume) clockwise or

counterclockwise to adjust.

Main volume adjustment (Setting range : 0 to 40, Default:18)

q : Up

w : Down

Bass adjustment (Setting range : –12 to +12, 2 dB Step, Default:Bass 0)

q : Up

w : Down

Treble adjustment (Setting range : –12 to +12, 2 dB Step, Default:Treble 0)

q : Up

w : Down

Balance adjustment

(Setting range : L15 to R15 and Centre, Default: Centre)

q : Right enhanced

w : Left enhanced

Fader adjustment (Setting range : R15 to F15 and Centre, Default: Centre)

q : Front enhanced

w : Rear enhanced

Subwoofer level adjustment

(Setting range : –6 to +6 and mute, 2 dB Step, Default: 0)

q : Up

w : Down

Subwoofer Low Pass Filter (Setting range : 120 Hz/80 Hz, Default 120 Hz)

q : 120 Hz

w : 80 Hz

Note:

If no operation takes place for more than 5 seconds in the audio menu

(2 seconds in Main volume adjustment), the display returns to Regular

Mode.

(External Mute)

(External muting display)

English

CQ-DFX883N

Press (MENU) to display the menu dis-

play.

For using the remote control, hold down (MENU) for

2 sec. or more.

Press (]) or ([) to display the PIC-

TURE menu.

Press (}) or ({) to select

a function to be adjusted.

Press (SET) to confirm the function.

Press (}) or ({) to adjust

the setting value.

Press (SET).

Press (MENU) to confirm the adjust-

ment.

For using the remote control, hold down (MENU) for

2 sec. or more.

SEL

Spectrum analyzer setting

: Pattern 1 (Default)

: Pattern 5

:Off

Contrast adjustment (Setting range: 1 to 5, Default: Contrast 3)

: Tilting down view angle

: Tilting up view angle

Display setting

: Regular display (Default)

: Switching the display off

Note: Even when switching the display off, pressing any button causes the display acti-

vated for 5 seconds.

CQ-DFX883N

OPEN

Display Setting (PICTURE menu)

Adjustment to display on the picture menu

If the display adversely affects your

driving in a dark place, for exam-

ple, you can turn it off completely.

Anti-Theft System

This unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable. The security indi-

cator will blink.

Remove the removable face plate

q Switch off the power of the unit.

w Press (OPEN). The removable face plate will be

opened.

e Push the face plate to either the right or left.

r Pull it out toward you.

t Gently press the bottom of the case and open the cover.

Place the face plate into the case and take it with you when

you leave the car.

Install Removable Face Plate

q Fit the face plate with its right or left hole on one of the

pins provided on the main unit.

w Fit the other hold on the other pin applying slight pressure.

e Move the face plate up and down a few times to make sure

it is secure. Then close the front panel and press down the

right side of the face plate until it clicks into plate.

Security Functions

Following functions are activated when the Security Function

is ON. (a Page 25)

■ Security indicator

It blinks when the removable face plate is removed from

the unit.

■ Panel Removal Alarm

It sounds to warn you not to forget to remove the panel

before leaving your car.

■ Security message

Also message is displayed.

OPEN

Removable Face Plate Case

Contact

Security Indicator

Cautions:

¡This face plate is not waterproof. Do not expose it to water or excessive moisture.

¡Do not remove the face plate while driving your car.

¡Do not place the face plate on the dashboard or nearby areas where the temperature rises to high levels.

¡Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical contacts.

¡If dirt or other foreign substances get on the contacts, wipe them off with clean and dry cloth.

¡To avoid damaging the front panel, do not push it down or place objects on it while it is open.

Contact

Pull out

Push

Open

(Security message display)

English

CQ-DFX883N

Troubleshooting

If You Suspect Something Wrong

Check and take steps as described in the tables below.

If the suggestions in the charts do not solve the problem, we recom-

mend that you take it to your nearest authorized Panasonic Service

Center. The product should be serviced only by a qualified technician.

Cautions:

¡ Do not use the unit in an irregular condition, for

example, without sound, or with smoke or foul

smell, which can cause ignition or electric shock.

Immediately stop using the unit and call the store

where you purchased it.

¡ Never try to repair the unit by yourself because it

is dangerous to do so.

Common

No power

Car’s engine switch is not on.

Turn your car’s ignition switch to ACC or ON.

Cables are not correctly connected.

Connect cables correctly.

Battery cable: Connect the battery cable to the terminal

that is always live.

Accessory cable: Connect the accessory cable to your car’s

ACC source.

Grounding wire: Connect the grounding wire to a metal

part of your car.

Fuse is burnt.

Call the store where you purchased the unit, or your near-

est Panasonic Service Center.

The power fails unintentionally.

The safety device works.

Call the store where you purchased the unit, or your near-

est Panasonic Service Center.

No sound

Mute is set to ON.

Set it to OFF.

Cables are not correctly connected.

Connect cables correctly.

External Mute lead is not correctly connected.

Connect the External Mute lead correctly.

Condensation (dew).

Wait for a while before use.

Noise

aCheck that there is nothing causing radio interference

with the machine.

Check the point where it is installed. Make sure that the

ground lead is properly grounded.

The display shows demonstration message.

Demonstration mode is ON.

Press

(DISP Display)

to cancel the demonstration

mode.

Radio

Poor reception

aCheck that the antenna was installed and grounded

properly.

Preset station is reset

Battery cable is not correctly connected.

Connect the battery cable to the terminal that is

always live.

No sound/disc is ejected automatically

Disc is upside down.

Place disc in the correct direction with the label side up.

Disc is dirty.

Clean disc, referring to the section on “Notes on CD/CD

Media (CD-ROM, CD-R, CD-RW)” (

page 31).

A disc that has data other than CD-DA or MP3/WMA type is

loaded.

Discs that have CD-DA or MP3/WMA type data should be

used.

Some CD-R/RWs cannot be played back successfully thanks

to incompatibility among writing software, a CD recorder (CD-

R/RW drive) and the discs.

Refer to instructions for the concerned devices for details.

Sound skips, bad sound quality. (e.g.

caused by noise)

Disc is dirty.

Clean disc, referring to the section on “Notes on CD/CD

Media (CD-ROM, CD-R, CD-RW)” (

page 31).

Some CD-R/RWs cannot be played back successfully thanks

to incompatibility among writing software, a CD recorder (CD-

R/RW drive) and the discs.

Refer to instructions for the concerned devices for details.

Sound skip due to vibration.

Mounting angle is over 30 degrees.

Adjust mounting angle to less than 30 degrees.

Unstable mounting.

Mount the unit securely with the mounting parts, referring

to the section on Installation.

Disc is not ejected.

Disc is defective.

Mechanical trouble.

Open the panel and press [

]. If normal operation is not

restored, call the store where you purchased the unit or the

nearest Panasonic Service Center to ask for repairs.

MP3/WMA

Time is counted but no sound comes out.

aFor a disc that contains both CD-DA data and MP3/WMA

data, the unit plays CD-DA data first and MP3/WMA data

next collectively in recorded order respectively. If there is

a MP3/WMA file between CD-DA files in recorded order,

there is a 5-second silent period for the MP3/WMA file

spot when the unit plays CD-DA data.

No playback.

The disc does not conform to any of the file systems support-

ed by this player.

For supported file systems, see “Notes on MP3/WMA” (

Page 32).

There is no extension attached.

For an MP3 file, attach “.mp3”, and for a WMA file, attach

“.wma”.

It takes too long for playback to start.

The folders and files recorded on the disc are layered too

much.

As checking of files takes longer in this case, do not record

any unnecessary folders or files other than MP3/WMA on

the disc.(If there are many hierarchies of files and folders,

it may take up to 150 seconds to start playback.)

Poor recording quality, sound skipping.

The recording quality differs depending on the encoding soft-

ware used, and on settings such as the bit rate.

For recommended bit rate, see “Notes on MP3/WMA” (

Page 32).

High-speed writing was executed when MP3/WMA data was

recorded on the disc.

Decrease writing speed as low as possible.

There may be a problem with your writing software

or CD recorder (CD-R/RW drive). For details refer

to the user manual of your writing software.

Files are not played in the desired order.

Files or folders are not recorded in the desired playback order.

Some writing software lets you specify the recording order

by adding a prefix in the range of “01” - “99”, etc. to the

file name. For details refer to the user manual of your

writing software.

Folder/file name is not displayed correctly.

The disc does not conform to the file systems supported by

this player.

Insert a disc that conforms to the file systems supported by

this player. For supported file systems see “Notes on

MP3/WMA” (

Page 32).

There may be a problem with your writing software or CD

recorder (CD-R/RW drive).

For details refer to the user manual of your writing soft-

ware.

File playing time is not displayed correctly.

You ran the file in fast forward or fast reverse during playback

or turned off the ignition switch of the car during playback.

Playing another file will return the file playing time to nor-

mal.

You played a VBR (Variable Bit Rate) format MP3 file.

The file playing time of VBR (Variable Bit Rate) format

MP3 file is sometimes displayed incorrectly.

Sound Setting

No sound from left, right, front, or rear

speaker

Left and right balance, or front and rear balance is off on one

side.

Adjust Balance/Fader as appropriate (

page 24).

Cables are not correctly connected.

Connect the cables correctly.

Left and right sounds are reversed.

The speaker leads are connected in reverse between right and

left.

Connect the speaker leads to the correct one.

Remote Control

Buttons are invalid for operation.

Battery polarities (+) (–) are reversed.

Insert the battery correctly.

Wrong battery

Check the battery.

Battery has run down.

Replace the battery.

Remote control is in the wrong direction.

Direct the remote controller at Remote Control Sensor on

the panel.

English

CQ-DFX883N

Error Display Messages

Display Possible cause/Possible solution

¡ Disc is dirty, or is upside down.

¡ Disc has scratches.

■ CD Changer

No operation by some cause.

aEject the magazine. If failure persists, press the reset switch on the

CD changer. If normal operation is not restored, call the store where

you purchased the unit or the nearest Panasonic Service Center to ask

for repairs.

Note: Messages in the action and display sections of the error chart vary with changers. Refer to the operating instructions for the

CD changer for details.

Display Possible cause/Possible solution

¡ Disc is dirty, or is upside down.

¡ Disc has scratches.

No operation by some cause.

a Call the store where you purchased the unit, or your nearest

Panasonic Service Center.

After 5 seconds

¡ The file is not readable.

¡ Error display continues when there is no playable file in the specified folder

at the direct folder selection.

a Specify another folder.

■ CD/MP3/WMA

¡ A WMA file can be copyrighted.

a The file protected by copyright is not playable.

After 5 seconds

To next file automatically

¡ No disc.

To next disc automatically

¡ No disc (magazine).

¡ No changer.

Maintenance/Fuse

Fuse

Use fuses of the same specified rating (15 A). Using different substitutes or fuses with higher ratings, or connecting the

unit directly without a fuse, could cause fire or damage to the unit.

If the replacement fuse fails, contact your nearest authorized Panasonic Service Center.

How to hold the disc

¡ Do not touch the underside of the disc.

¡ Do not scratch on the disc.

¡ Do not bend the disc.

¡ When not in use, keep disc in the case.

Do not use irregularly shaped discs.

Do not leave discs in the following places:

¡ Direct sunlight

¡ Near car heaters

¡ Dirty, dusty and damp areas

¡ Seats and dashboards

Disc cleaning

Use a dry, soft cloth to wipe from the center outward.

Do not attach any seals or labels to your discs.

Do not write on the disc label in a heavy pen or ballpoint pen.

Maintenance

Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for routine exterior

cleaning. Never use benzine, thinner, or other solvents.

■ Notes on CD/CD Media (CD-ROM, CD-R, CD-RW)

Label side

Do not use irregularly shaped discs.

■ Notes on CD-Rs/RWs

¡ You may have trouble playing back some CD-R/RW discs recorded on CD recorders (CD-R/RW drives), either due to

their recording characteristics or dirt, fingerprints, scratches, etc. on the disc surface.

¡ CD-R/RW discs are less resistant to high temperatures and high humidity than ordinary music CDs. Leaving them

inside a car for extended periods may damage and make playback impossible.

¡ Some CD-R/RWs can not be played back successfully thanks to incompatibility among writing software, a CD recorder

(CD-R/RW drive) and the discs.

¡ This player cannot play the CD-R/RW discs if the session is not closed.

¡ This player cannot play the CD-R/RW discs which contains other than CD-DA or MP3/WMA data (Video CD, etc.).

¡ Be sure to observe the instructions of CD-R/RW disc for handling it.

If you use commercial CDs, they must have

either of these labels shown at right.

TEXT

English

CQ-DFX883N

Notes on MP3/WMA

What is MP3/WMA?

MP3 (MPEG Audio Layer-3) and WMA (Windows Media

Audio) are the compression formats of digital audio. The former

is developed by MPEG (Motion Picture Experts Group), and the latter is developed by Microsoft Corporation. Using these

compression formats, you can record the contents of about 10 music CDs on a single CD media (This figures refer to data

recorded on a 650MB CD-R or CD-RW at a fixed bit rate of 128 kbps and a sampling frequency of 44.1 kHz).

Notes:

¡MP3/WMA encoding and writing software is not supplied with this unit.

¡CD writing software is not supplied with this unit.

Points to remember when making MP3/WMA files

Common

¡High bit rate and high sampling frequency are recom-

mended for high quality sounds.

¡Selecting VBR (Variable Bit Rate) is not recommended

because playing time is not displayed properly and sound

may be skipped.

¡The playback sound quality differs depending on the

encoding circumstances. For details, refer to the user

manual of your own encoding software and writing soft-

ware.

MP3

¡It is recommended to set the bit rate to “128 kbps or

more” and “fixed”.

WMA

¡It is recommended to set the bit rate to “64 kbps or

more” and “fixed”.

¡Do not set the copy protect attribute on the WMA file to

enable this unit to play back.

Recording MP3/WMA files on a CD-media

¡You are recommended to minimize the chances of mak-

ing a disc that contains both CD-DA files and MP3/WMA

files.

¡When storing MP3 data and WMA data on the same

disc, use different folders for each data.

¡Do not record files other than MP3/WMA files and unnec-

essary folder on a disc.

¡The name of MP3/WMA file should be added by rules as

shown in the following descriptions and also comply with

the rules of each file system.

¡You may encounter trouble in playing MP3/WMA files or

displaying the information of MP3/WMA files recorded

with certain writing software or CD recorders.

¡The file extension “mp3” or “wma” should be assigned to

each file depending on the file format.

¡This unit does not have the play list function.

¡Although Multi-session recording is supported, the use of

Disc-at-Once is recommended.

Supported file systems

ISO 9660 Level 1/Level 2, Apple Extension to ISO 9660,

Joliet, Romeo

Note: Apple HFS, UDF 1.50, Mix CD(CD Extra) is not sup-

ported.

32, 44.1, 48 kHzNo64k-192 kbpsWindows Media Audio Ver. 2, Ver. 8

16, 22.05, 24 kHzYes8k-160 kbpsMPEG 2 audio layer 3 (MP3)

32, 44.1, 48 kHzYes32k-320 kbpsMPEG 1 audio layer 3 (MP3)

Sampling frequencyVBRBit rateCompression method

Folder selection order/file playback order

Maximum number of files/folders

¡Maximum number of files: 999

¡Maximum number of files in one folder: 255

¡Maximum depth of trees: 8

¡Maximum number of folders: 255 (Root folder is included.)

Notes:

¡This unit counts the number of folders irrespective of the presence

or absence of MP3/WMA file.

¡If the selected folder does not contain any MP3/WMA files, the

nearest MP3/WMA files in the order of playback will be played.

¡Playback order may be different from other MP3/WMA players even

if the same disc is used.

¡“ROOT” appears when displaying the root folder name.

Root Folder

(Root Directory)

Folder Selection

File Selection

Tree 1 Tree 2 Tree 3 Tree 4 Tree 8

(Max.)

1 8

–In the order

Displayable characters

¡Displayable length of file name/folder name: within 64 characters

¡Name files and folders in accordance with the standard of each file system. Refer to the instructions of writing software

for details.

¡ASCII character set and special characters in each language can be displayed.

ASCII character set

A to Z, a to z, digits 0 to 9, and the following symbols:

(space) ! ” # $ % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | }

Special characters

À Á Â Ã Å à á â ã å

Ä ä

Ò Ó Ô Õ Ö ò ó ô õ ö

Ù Ú Û Ü ù ú û ü

Notes:

¡With some software in which MP3/WMA format files have been encoded, the character information may not be displayed

properly.

¡Undisplayable characters and symbols will be converted into an asterisk (

Display Information

Displayed items

It is prohibited by copyright laws to copy, distribute and deliver

copyrighted materials such as music without the approval of

No warranty

Above description complies with our investigations as of

December 2002. It has no warranty for reproducibility and dis-

playability of MP3/WMA.

Caution: Never assign the “mp3”, or “wma” file name extension to a file that is not in the MP3/WMA format. This

may not only produce noise from the speaker damage, but also damage your hearing.

Windows Media, and the

Windows logo are trademarks, or

registered trademarks of

Microsoft Corporation in the

United States and/or other coun-

tries.

CD-TEXT

¡Disc title

¡Track title

MP3/WMA

¡Folder name

¡File name

MP3 (ID3 tag)

¡Artist name

¡Title name

WMA (WMA tag)

¡Artist name

¡Title name

Compression formats (Recommendation: “Points to remember when making MP3/WMA files” on the previous page)

Cyan Magenta Yellow Black

CQ-DFX983/DFX903N Installation Instructions (1)

BAND

OPEN

REG

Within 30°

53mm

182mm

4.5 mm – 6.0 mm

CQ-DFX983N

OPEN

Installation Instructions

Einbauanleitung

Instructions de montage

Installatie-handleiding

Installation Instructions

Einbauanleitung

Instructions de montage

Installatie-handleiding

●

Please read these instructions carefully before using this product and keep this manual for future reference.

●

Bitte lesen Sie diese Bedienungsanleitung vor der Verwendung dieses Produktes aufmerksam durch und bewahren

Sie sie danach für spätere Nachschlagzwecke sorgfältig auf.

●

Prière de lire ces instructions attentivement avant d’utiliser le produit et garder ce manuel pour l’utilisation ultérieure.

●

Leest u deze instructie alstublieft zorgvuldig door voor u dit product in gebruik neemt en bewaar deze handleiding voor later gebruik.

Consult a professional for installation.

●Verify the radio using the antenna and speakers before installation.

Wenden Sie sich zum Einbau an einen Fachmann.

●Probieren Sie den Radiobetrieb vor dem Einbau mit Antenne

und Lautsprechern aus.

Prenez contact avec un spécialiste pour le montage.

●Vérifiez l’autoradio avant de procéder au montage.

Vraag een vakman voor de installatie.

●Controleer voor de installatie of de radio werkt met de antenne en

de luidsprekers.

●Mounting angle side to side : horizontal

front to rear : 0-30°

●Montagewinkel seitlich : horizontal

vorne-hinten : 0-30°

●Angle de montage latéral : horizontal

longitudinal : 0 à 30°

●Bevestigingshoek links/rechts : horizontaal

voor/achter : 0 - 30°

●Mounting space

●Einbauöffnung

●Espace nécessaire pour le montage

●Benodigde ruimte

Before Installation/Vor dem Einbau

Avant l'installation/Voor de installatie

Before Wiring/Vor der Verdrahtung

Avant le câblage/Voor het aansluiten van de bedrading

How to install the unit/Einbau des Gerätes/Mode de montage de l’appareil/Installeren van het toestel

Supplied Hardware/Mitgelieferte Hardware/Matériel d’installation/Meegeleverde onderdelen

No. Diagram

Q'ty

Item No. Diagram

Q'ty

Item

Mounting collar

Einbauhalterung

Cadre de montage

Bevestigingskraag

Bolt (5 mm )

Befestigungsschraube (5 mm )

Boulon (5 mm )

Bout (5 mm )

ISO antenna adapter

ISO-Antennenadapter

Adaptateur d’antenne ISO

ISO antenne-adapter

Lock cancel plate

Verriegelungsfreigabeplatte

Plaque anti-blocage

Ontgrendelingsplaat

Power connector

Versorgungsstecker

Connecteur d’alimentation

Stroomstekker

Installation/Einbau/Montage/Installatie

Mounting collar insertion Bend mounting tabs.

Einsetzen der Einbauhülse

Biegen Sie die Einbaulaschen ab.

Insertion du collier de fixation Replier les languettes de fixation

Inbrengen bevestigingskraag Buig bevestigingslipjes om.

Connection of power connector

Anschluß des Versorgungssteckers

Raccordement du connecteur d'alimentation

Aansluiten van de stroomstekker

Tr im plate mounting

Anbringen der Abdeckplatte

Installation de la plaque de garniture

Bevestigen van de afwerkingsrand

Cable reconnection

Wiederanschließen des Kabels

Rebranchement du câble

Opnieuw aansluiten kabel

Remove the front panel.

Nehmen Sie das

Bedienteil ab.

Retirez le panneau de

façade.

Verwijder het voorpaneel.

Remove the trim plate.

Entfernen Sie die

Abdeckplatte.

Enlevez la plaque de

garniture.

Verwijder de afwerkingsrand.

Pull out the unit with

both hands.

Ziehen Sie das Gerät mit

beiden Händen heraus.

Retirez l’appareil à deux

mains.

Trek het toestel met beide

handen naar buiten.

OPEN

Tr im plate

Abdeckplatte

Plaque de garniture

Afwerkingsrand

How to remove the unit/Ausbau des Gerätes

Dépose de l’appareil/Verwijderen van het toestel

Lock release

q Insert the plate until you

hear a click.

w Pull the main unit while

pushing the plate inward.

Freigabe der Verriegelung

q Schieben Sie die Platte ein,

bis Sie ein Klickgeräusch

vernehmen können.

w Ziehen Sie an dem

Hauptgerät, während Sie die

Platte hineindrücken.

Libération du verrouillage

Insérer la plaque jusqu'à ce

qu'un déclic se produise.

Dégager l'appareil principal

tout en repoussant la plaque

vers l'intérieur.

Ontgrendeling

q Steek de plaat naar binnen

tot u een klik hoort.

w Trek het hoofdtoestel naar

buiten terwijl u de plaat

naar binnen drukt.

Cautions :

● Wear gloves for safety.

●

Make sure that wiring is completed

before installation.

Vorsicht :

● Tragen Sie Handschuhe, um sich

vor Verletzungen zu schützen.

●

Achten Sie vor dem Einbau darauf,

daß die Verdrahtung fertiggestellt ist.

Précautions:

● Porter des gants à des fins de sécurité.

●

S'assurer que le câblage est terminé avant

l'installation.

Let op:

● Draag handschoenen voor uw veiligheid.

●

Controleer of de bedrading correct is aangelegd

voor u gaat installeren.

Remove the cable from the battery negative terminal.

Trennen Sie das Kabel von der negativen Batterieklemme ab.

Retirer le câble de la borne négative de la batterie.

Koppel de kabel van de negatieve aansluiting van de accu los.

Bend appropriate tabs to secure the unit

without backlash.

Die entsprechenden Einbaulaschen so

umbiegen, daß das Gerät ohne Spielraum

fest sitzt.

Replier les languettes

de fixation appropriées

pour immobiliser

l'appareil sans

contrecoup.

Buig de juiste lipjes om

zodat het toestel vast

zit zonder speling.

Main unit securing q Screw the bolt into the main unit.

w Secure the rear of the main unit.

Snap the right and left springs into each hole.

Befestigung q Schrauben Sie die Schraube in das

des Hauptgerätes Hauptgerät.

w Sichern Sie die Rückseite des Hauptgerätes.

Lassen Sie die rechten und linken Federn in den

löchern einschnappen.

q Visser le boulon dans l'appareil principal.

w Fixer l'arrière de l'appareil principal.

Bouteroller les ressorts droit et gauche dans chaque trou.

q Schroef de bout in het hoofdtoestel.

w Zet de achterkant van het hoofdtoestel vast.

e Pas de rechter en linker veren in de

bijbehorende gaten.

Exclusively operated with 12-volt battery with

negative (–) ground.

Dieses Gerät ist ausschließlich für den Anschluß

an Bordnetze mit 12 V Batterie und negativer Klemme

an Masse bestimmt.

Alimentez l’appareil absolument par la batterie de 12

volts avec sa polarité négative (–) mise à la masse.

Uitsluitend voor gebruik met een 12 Volt accusysteem

met negatieve (–) aarding.

Connect the power lead (red)

very last.

(for non-ISO connector)

Schließen Sie den

Versorgungsleiter(rot) zum

Schluß an

(wenn kein ISO-Stecker

verwendet wird)

Raccorder le fil d'alimentation

(rouge) en dernier.

(pour un connecteur non-ISO)

Sluit de stroomdraad (rood) pas het allerlaatst

aan.

(voor een niet-ISO aansluiting)

Connect the battery lead (yellow) to the positive

(+) terminal of the battery or fuse block terminal (BAT).

(for non-ISO connector)

Schließen Sie das Batteriekabel (gelb) an die positive (+)

Klemme der Batterie oder an die (BAT) Klemme des

Sicherungsblocks an

(wenn kein ISO-Stecker verwendet wird).

Connectez le fil (jaune) à la borne positive (+) de la

batterie ou à la borne (BAT) de la boîte à fusibles.

(pour un connecteur non-ISO)

Sluit de accudraad (geel) aan op de positieve (+)

aansluiting van de accu of van het zekeringenblok (BAT).

(voor een niet-ISO aansluiting.)

Apply insulating tape to bare leads.

Isolieren Sie alle freiliegenden Leiter.

Recouvrez les fils nus d’un ruban isolant.

Isoleer blote draadeinden met

isolatieband.

Secure loosened leads.

Sichern Sie alle losen Leiter.

Resserrez les connexions de fils.

Zet loshangende draden vast.

Securing to fire wall

Befestigung an Brandschutzwand

Obtenir un pare-feu

Vastzetten aan het brandschot

Using the rear support strap (Option)

Using the rubber cushion (Option)

Verwendung der Einbauleiste (Option) Verwendung des Gummikissens (Option)

Utiliser de la barrette de support arrière (Option) Utiliser la bague d'amortisseur en caoutchouc (Option)

Gebruik van de achter-steunstrip (optioneel)

Gebruik van het rubber stootkussen (optioneel)

3mm Ta pping screw (Option)

Blechschraube (Option)

Vis taraudeuse (option)

Zelftappende schroef

(los verkrijgbaar)

To the unit

An das Gerät

Côté appareil

Naar het toestel

Rear support strap (Option)

Einbauleiste (Otpion)

Plaque-support arrière (option)

Achter-steunstrip

(los verkrijgbaar)

Hexagonal nut (Option)

Sechskantmutter (Option)

Ecrou hexagonal (option)

Zeskantige moer

(los verkrijgbaar)

Rear support bracket

(supplied with car)

Einbauleiste (vorhanden im

Fahrzeug)

Support arrière

(fourni avec votre voiture)

Achter-steunbeugel

(behorend bij de auto)

Rubber cushion (Option)

Gummikissen (Option)

Canon en caoutchouc (option)

Stootrubber (los verkrijgbaar)

To the unit

An das Gerät

Côté appareil

Naar het toestel

Fixation de l'appareil

principal

Vastzetten

hoofdtoestel

EnglishDeutschFrançaisNederlands

Clank!

YEFM292923 ND1202-1023 Printed in China

TEXT

Removable Full Front MP3 WMA CD Player/Receiver with Full Dot Matrix Display and CD Changer Control

CQ-DFX983N

Removable Full Front CD Player/Receiver with Full Dot Matrix Display and CD Changer Control

CQ-DFX903N

Removable Full Front MP3 WMA CD Player/Receiver with CD Changer Control

CQ-DFX883N

(CQ-DFX983N)

Matsushita Electric Industrial Co., Ltd.

Web Site : http://www.panasonic.co.jp/global/

IMPORTANT

When this unit is installed in dashboard,

ensure that there is sufficient air flow around

the unit to prevent damage from overheating,

do not block any ventilation holes on the unit.

WICHTIG

Bei Einbau des Geräts im Armaturenbrett

sollte darauf geachtet werden, daß der

Luftstrom um das Gerät nicht behindert ist,

um Beschädigung durch Überhitzen zu

verhindern, und die Belüftungsöffnungen des

Geräts nicht blockiert sind.

IMPORTANT

Lorsque cet appareil est installé dans le

tableau de bord, assurez-vous qu'il y a une

circulation d'air suffisante autour de l'appareil

afin d'éviter tout endommagement provoqué

par une surchauffe et qu'aucun trou d'aération

de l'appareil n'est obturé.

BELANGRIJK

Wanneer dit toestel in het dashboard wordt

geïnstalleerd, moet u ervoor zorgen dat er

voldoende ventilatie is rond het toestel. Om

oververhitting te voorkomen mogen de

ventilatie-openingen in het toestel niet

afgedekt worden.

Cyan Magenta Yellow Black

CQ-DFX983/DFX903N Installation Instructions (1)

ACC

BATTERY 15A

ACC

BATTERY 15A

ACC

BATTERY 15A

( )

ACC

BATTERY 15A

Wiring/Verdrahtung/Câblage/Bedrading

●The pin arrangement of the power connector

conforms to ISO standard.

●Please check that the pin arrangement of the

connector in your car conforms to ISO standard.

●For car types A and B, change the wiring of the

red and yellow leads as shown at below.

●After connection, insulate the portions marked (❈)

with insulating tape.

Note : For cars other than types A and B, please

consult your local car shop.

Precautions

(

ISO Connector

)

●Die Stiftbelegung des Versorgungssteckers entspricht

em ISO-Standard.

●Bitte stellen Sie sicher, daß die Stiftbelegung

des Steckers in Ihrem Fahrzeug dem ISO-Standard

entspricht.200

●Für Fahrzeuge der Typen A und B, ändern Sie die

Verdrahtung der roten und gelben Leiter gemäß Abbildung.

●Nach dem Anschluß isolieren Sie die mit (❈) markierten

Abschnitte mit Isolierband.

Hinweis : Für andere Fahrzeuge als Typ A und B,

wenden Sie sich bitte an eine örtliche

Pkw-Werkstatt.

Vorsichtsmaßregeln (ISO-Stecker)

●La disposition des broches du connecteur d'alimentation

est conforme à la norme ISO.

●Veuillez vérifier si que la disposition des broches du

connecteur d'alimentation dans votre voiture est conforme

à la norme ISO.

●Pour les types de voiture A et B, changer le câblage des

fils rouge et jaune comme indiqué ci-dessous.

●Après avoir fait les connexions, isoler les sections

marquées (❈) avec de la bande isolante.

Remarque: Pour les voitures autres que des types A et B,

veuillez consulter votre magasin de matériel automobile local.

Précautions (Connecteur ISO)

●De pen-configuratie van de stroomstekker voldoet aan de

ISO standaard.

●Controleer of de pen-configuratie van de stekker in uw

auto eveneens voldoet aan de ISO standaard.

●

Voor auto's van type A en B, dient u de bedrading voor de rode

en gele draden te wijzigen zoals hieronder staat aangegeven.

●Na het aansluiten dient u de gedeelten die met (❈)

gemarkeerd zijn met isolatieband af te plakken.

Opmerking: Voor andere auto's dan die van type A en B

dient u uw garage te raadplegen.

Voorzorgen (ISO stekker)

Standard ISO/ISO-Standard/Normes ISO/Standaard ISO

IGN or ACC 12V supply

12 V-Versorgung

(IGN/ACC)

Alimentation 12 volts en

IGN ou ACC

IGN of ACC 12 V

stroomvoorziening

Car-side connector

Steckverbinder am Fahrzeug

Connecteur côté voiture

Stekker aan autozijde

Car-side connector

Steckverbinder am Fahrzeug

Connecteur côté voiture

Stekker aan autozijde

Car-side connector

Steckverbinder am Fahrzeug

Connecteur côté voiture

Stekker aan autozijde

12V Batteries (Continuouse supply)

12 V-Batterie (Dauerversorgung)

Batterie de 12 volts (alimentation continue)

12 V accu (doorlopende stroomvoorziening)

Car Type A/Kraftfahrzeug des Typs A/Type de voiture A/Autotype A

Car Type B/Kraftfahrzeug des Typs B/Type de voiture B/Autotype B

A7 A4

IGN or ACC 12V supply

12 V-Versorgung

(IGN/ACC)

Alimentation 12 volts en

IGN ou ACC

IGN of ACC 12 V

stroomvoorziening

12V Batteries (Continuouse supply)

12 V-Batterie (Dauerversorgung)

Batterie de 12 volts (alimentation continue)

12 V accu (doorlopende stroomvoorziening)

No connection

Kein Anschluß

Aucune connexion

Geen aansluiting

12V Batteries (Continuouse supply)

12 V-Batterie (Dauerversorgung)

Batterie de 12 volts (alimentation continue)

12 V accu (doorlopende stroomvoorziening)

Connect as follows.

Nehmen Sie den Anschluß wie folgt vor.

Branchez les haut-parleurs comme suit.

Sluit de luidsprekers als volgt aan.

●Use ungrounded speakers only.

Allowable input : 50W or more

Impedance : 4 – 8 Ω

●Distance between speaker and amplifier: 30 cm or more

●Verwenden Sie nur nicht geerdete Lautsprecher.

Zulässige Belastbarkeit: 50 W oder mehr

Impedanz : 4 – 8 Ω

●Entfernung zwischen Lautsprecher und Verstärker: 30 cm oder mehr

●Utilisez uniquement des haut-parleurs non reliés à la masse.

Puissance d'entrée admissible: 50 W ou davantage

Impédance: 4 – 8 ohms

●Distance entre le haut-parleur et l'amplificateur: 30 cm ou davantage

●Gebruik uitsluitend ongeaarde luidsprekers.

Toegestaan ingangsvermogen: 50 W of hoger

Impedantie: 4 - 8 Ω

●Afstand tussen luidspreker en versterker: 30 cm of meer

External Mute Lead

To the Navi Mute lead of the Panasonic car navigation system or car telephone mute lead.

Externe-Stummschaltungskabel

An das Navigationssystem-Stummschaltungskabel des Panasonic Navigationssystems oder an das Autotelefon-Stummschaltungskabel.

Fil de Mise en sourdine extérieure

A raccorder au fil Navi Mute du système de navigation automobile de Panasonic ou au fil de mise en sourdine du téléphone pour véhicule.

Externe-geluiddempingsdraad

Naar de Navi Mute draad van een Panasonic auto-navigatiesysteem of naar de dempingsdraad voor deautotelefoon.

Power connector/Versorgungsstecker/Connecteur d’alimentation/Stroomstekker

Speaker Connection/Anschluß der Lautsprecher/Branchement avec les haut-parleurs/Aansluiten van de luidsprekers

External Remote Control Lead

When using a non-Panasonic external remote control, refer to the manufacture for their product before connecting.

Leitungsdraht für externe Fernbedienung

Wenn Sie eine externe Fernbedienung verwenden, die nicht von Panasonic hergestellt wurde, wenden Sie sich vor dem

Anschluß an den Hersteller des Produktes.

Fil de la télécommande extérieure

En cas d’utilisation d’une télécommande extérieure non-Panasonic, se référer aux conseils du fabricant concerné pour les

connexions électriques.

Externe afstandsbedieningsdraad

Bij gebruik van een externe afstandsbediening die niet van Panasonic is, dient u voor aansluiting de handleiding of de

fabrikant van het product in kwestie te raadplegen.

Warning: Do not connect the power connector until the whole wiring is

completed.

Warnung: Schließen Sie den Versorgungsstecker erst an, nachdem die

gesamte Verdrahtung beendet wurde.

Avertissement: Ne pas raccorder le connecteur d'alimentation tant que la

totalité des câblages n'est pas complètement terminée.

Waarschuwing: Sluit de stroomstekker pas aan wanneer de volledige

bedrading is aangesloten.

Antenna

Antenne

Preamp Out Connector

(

Rear

)

Vorverstärker-Ausgang

(Rückseite)

Connecteur de sortie de

préamplificateur (arrière)

Uitgangsaansluiting

voorversterker (achter)

Preamp Out Connector

(

Front

)

Vorverstärker-Ausgang

(Vorderseite)

Connecteur de sortie de

préamplificateur (avant)

Uitgangsaansluiting

voorversterker (voor)

System Upgrade Example: Connecting with a CD changer/Beispiel für die Systemerweiterung: Anschluß an einen CD-Wechsler/

Exemple de mise à niveau de système: Raccordement à un changeur de disque CD/Voorbeeld uitbreiding systeem: aansluiten van een CD-wisselaar

CQ-DFX983/903/883N

Not used / Nicht verwendet

N' est pas utilisé / Niet gebruikt

A7 :

A8 :

A4 :

A5 :

C3 :

C4 :

External Amplifier Control Power Lead To an external amplifier.

Stromversorgungskabel für externen Verstärker An einen externen Verstärker.

Fil d'alimentation de commande d'amplificateur externe À un amplificateur externe.

Stroomdraad externe versterker bediening Naar een externe versterker.

C3 :

C2 :

Dual CD Changer Control Lead

The dual CD changer control lead of a dual CD changer selector (ex. CA-CD55EN) should be connected.

Kabel für Doppelwechsler-Steuerung

Hier das Kabel für eine Doppelwechsler-Steuerung (z.B. CA-CD55EN) anschließen.

Fil de commande de double changeur de disque CD Le fil de commande d'un double changeur de disque CD d'un

sélecteur de double changeur de disque CD (par expl. CA-CD55EN) doit être connecté.

Stuurdraad tweevoudige CD-wisselaar

Sluit de tweevoudige CD-wisselaar stuurdraad van een tweevoudige CD-wisselaar keuzeschakelaar (bijv. CA-CD55 EN) aan.

C1 :

Sub-Woofer Out Cord

(

Monaural

)

Subwoofer-Ausgangskabel (MONO)

Cordon de sortie de woofer

secondaire de grave (monaural)

Subwoofer uitgangsaansluiting

(mono)

AUX Input Cord

AUX-Eingangskabel

Cordon d'entrée AUX

AUX ingangsaansluiting

(

)/(

)/(D)/(R)

(

)/(

)/(G)/(L)

(

)/(

)/(D)/(R)

(

)/(

)/(G)/(L)

(

)/(

)/(D)/(R)

(

)/(

)/(G)/(L)

(

)/(

)/(D)/(R)

(

)/(

)/(G)/(L)

(

)/(

)/(D)/(R)

(

)/(

)/(G)/(L)

CD Changer Control Connector The DIN cord of a CD changer (ex. CX-DP9061EN) should be connected.

The DIN cord of a dual CD changer selector (ex. CA-CD55EN) should be connected when the selector is incorporated into the system.

Steckverbinder der CD-Wechslersteuerung Hier das DIN-Kabel eines CD-Wechslers (z.B. CX-DP9061EN) anschließen.

Hier das DIN-Kabel einer Doppelwechsler-Steuerung (z.B. CA-CD55EN) anschließen, wenn eine solche im System vorhanden ist.

Connecteur de commande de changeur de disque CD Le cordon DIN d'un changeur de disque CD (expl. CX-DP9061EN) doit être raccordé.

Le cordon DIN d'un sélecteur de double changeur de disque CD (par expl. CA-CD55EN) doit être connecté lorsque le sélecteur est incorporé dans le système.

Stekker CD-wisselaar bediening Sluit het DIN snoer van de CD-wisselaar (bijv. CX-DP9061EN) aan.

Sluit het DIN snoer van een tweevoudige CD-wisselaar keuzeschakelaar (bijv. CA-CD55EN) aan wanneer de keuzeschakelaar deel uitmaakt van uw systeem.

ISO Antenna Adapter

(

If needed

)

ISO-Antennen-adapter

(falls erfor derlich)

Adaptateur d'antenne ISO

(si nécessaire)

ISO antenne-adapter (Indien nodig)

ISO Connector

ISO-Stecker

Connecteur ISO

ISO aansluiting

Power Lead

(

ACC or IGN

)

To ACC power, +12V DC.

Versorgungskabel (ACC oder IGN)

An die ACC-Stromklemme, +12 V Gleichspannung.

Fil d’alimentation (ACC ou IGN) A l’alimentation ACC, +12V CC

Stroomdraad (ACC of IGN) Naar ACC stroomvoorziening, + 12 V gelijkstroom.

Ground Lead To a clean, bare metallic part of the car chassis.

Massekabel An ein sauberes, metallisches Teil des Fahrzeugchassis.

Fil de mise à la masse A une partie métallique propre découverte du châssis de voiture

Aarding Naar een schoon, bloot metalen onderdeel van het chassis.

Battery Lead To the car battery, continuous +12 V DC.

Batteriekabel An die Batterie des Fahrzeuges, kontinuierlich +12 V Gleichspannung.

Fil de batterie A la batterie de voiture, alimentation continue de +12 V CC

Accudraad Naar de accu van de auto, doorlopende stroomvoorziening + 12 V gelijkstroom.

REAR

FRONT

S.W-OUT

AUX-IN

CD.C-IN

Fuse (15 A) Refer fuse replacement to your nearest authorized Panasonic

Service Center. Do not try fuse replacement by yourself.

Sicherung (15 A):

Wenden Sie sich zum Austausch der Sicherung an eine autorisierte

Panasonic-Kundendienststelle in Ihrer Nähe. Versuchen Sie nicht, den Austausch

selbst vorzunehmen. Steckverbinder am Fahrzeug

Fusible (15 A) Confier le remplacement de fusible au centre de service de

service après-vente Panasonic agréé le plus proche. Ne pas essayer de

remplacer le fusible tout(e) seul(e).

Zekering (15 A) Laat het vervangen van de zekering over aan uw dichtstbijzijnde

Panasonic service-centrum. Probeer in geen geval zelf de zekering te vervangen.

CD Changer Input Connector

The RCA cord of a CD changer

(ex. CX-DP9061EN) should be

connected.

The RCA cord of a dual CD

changer selector (ex. CA-

CD55EN) should be connected when the selector is

incorporated into the system.

CD-Wechsler-Eingangssteckverbinder

Hier das RCA-Kabel eines CD-Wechslers (z.B. CX-

DP9061EN) anschließen.

Hier das RCA-Kabel einer Doppelwechsler-Steuerung (z.B.

CA-CD55EN) anschließen, wenn eine solche im System

vorhanden ist.

Connecteur d'entrée de changeur de disque CD

Le cordon RCA d'un sélecteur de changeur de disque CD

(expl. CX-DP9061EN) doit être raccordé.

Le cordon RCA d'un sélecteur de double changeur de

disque CD (par expl. CA-CD55EN) doit être connecté

lorsque le sélecteur est incorporé le système.

Ingangsaansluiting CD-wisselaar

Sluit het RCA (tulpstekker) snoer van de CD-wisselaar

(bijv. CX-DP9061EN) aan.

Sluit het RCA (tulpstakker) snoer van een tweevoudige

CD-wisselaar keuzeschakelaar (bijv. CA-CD55EN) aan

wanneer de keuzeschakelaar deel uitmaakt van uw

systeem.

Motor Antenna Relay Control Lead

To Motor Antenna. (Max. 500 mA)

(This lead is not intended for use with a switch actuated power antenna)

Steuerkabel für Relais der motorbetriebenen Antenne

Zu motorbetriebenen Antenne (max. 500 mA)

(Dieses Kabel dient nicht für die Verwendung mit einer über einen Schalter aktivierten motorbetriebenen Antenne.)

Fil de commande de relais d’antenne motorisée

A l’antenne motorisée (500 mA maxi.)

(Ce fil n’est pas conçu pour l’usage avec l’antenne commandée par interrupteur.)

Stuurdraad relais gemotoriseerde antenne

Naar de gemotoriseerde antenne. (Max. 500 mA)

(Deze draad is niet bedoeld voor een gemotoriseerde antenne die met een schakelaar wordt ingeschakeld.)

●Do not use a 3-wire type speaker system

having a common earth lead.

●Verwenden Sie niemals Lautsprechersysteme mit

Dreierverkabelung, die einen gemeinsamen

Erdungsleiter aufweist.

●Ne pas utiliser pas de système de haut-parleur

de type à 3 fils ayant un fil de mise à la masse

commun.

●Gebruik geen luidsprekersysteem met drie

draden en een gedeelde aarddraad.

(Orange)/(Orange)/(Orange)/(Oranje)

(Brown w/white stripe)/(Braun mit weißem Streifen)/(Brun à rayures blanches)/(Bruin met witte streep)

(Brown w/black stripe)/(Braun mit schwarzem Streifen)/(Brun à rayures noires)/(Bruin met zwarte streep)

(Blue w/white stripe)/(Blau mit weißem Streifen)/(Bleu à rayures blanches)/(Blauw met witte streep)

(Red)/(Rot)/(Rouge)/(Rood)

(Black)/(Schwarz)/(Noir)/(Zwart)

(Yellow)/(Gelb)/(Jaune)/(Geel)

(Blue)/(Blau)/(Bleu)/(Blauw)

CD·C-IN

(

)/(

)

(

)/(

)

Ground Lead

Massekabel

Fil de masse

Massadraad

Battery Lead

Batteriekabel

Fil de batterie

Accudraad

DIN Cord

DIN-Kabel

Cordon DIN

DIN snoer

RCA Cord

Cinch-Kabel

Cordon RCA

RCA-(tulp) snoer

CX-DP9061EN

●Do not connect more than one speaker to

one set of speaker leads. (except for connecting to

a tweeter)

●Schließen Sie niemals mehr als einen Lautsprecher

an einen Satz Lautsprecherleiter an. (außer bei

Anschluß eines Hochtonlautsprechers)

●Ne raccorder pas plus d'un haut-parleur à un

ensemble de fils de haut-parleur. (Sauf lors du

raccordement à un tweeter)

●Sluit niet meer dan één luidspreker aan op één paar

luidsprekerdraden. (Behalve bij aansluiting op een

tweeter.)

B7 :

Rear Left + (Green)

Hinten Links + (Grün)

Arrière gauche + (Vert)

Links achter + (Groen)

B5 :

Front Left + (White)

Vorne Links + (Weiß)

Avant gauche + (Blanc)

Links voor + (Wit)

B3 :

Front Right + (Gray)

Vorne Rechts + (Grau)

Avant droit + (Gris)

Rechts voor + (Grijs)

B1 :

Rear Right + (Violet)

Hinten Rechts + (Violett)

Arrière droit + (Violet)

Rechts achter + (Paars)

B2 :

Rear Right – (Violet w/black stripe)

Hinten Rechts – (Violett mit schwarzem Streifen)

Arrière droit – (Violet à rayures noires)

Rechts achter – (Paars met zwarte streep)

B4 :

Front Right – (Gray w/black stripe)

Vorne Rechts – (Grau mit schwarzem Streifen)

Avant droit – (Gris à rayures noires)

Rechts voor – (Grijs met zwarte streep)

B6 :

Front Left – (White w/black stripe)

Vorne Links – (Weiß mit schwarzem Streifen)

Avant gauche – (Blanc à rayures noires)

Links voor – (Wit met zwarte streep)

ISO Connector

ISO-Stecker

Connecteur ISO

ISO aansluiting

B8 :

Rear Left – (Green w/black stripe)

Hinten Links – (Grün mit schwarzem Streifen)

Arrière gauche – (Vert à rayures noires)

Links achter – (Groen met zwarte streep)

Panasonic cq-dfx883n Le manuel du propriétaire

Marque: Panasonic

Modèle: cq-dfx883n

Catégorie: Lecteur CD

Taper: Le manuel du propriétaire

Ce manuel convient également à

CQDFX883N

Télécharger le PDF

rapport

dans d''autres langues

English: Panasonic cq-dfx883n Owner's manual

Panasonic cq-dfx883n Le manuel du propriétaire

Ce manuel convient également à

Panasonic cq-dfx883n Le manuel du propriétaire

dans d''autres langues

Documents connexes