Yamaha 60 Le manuel du propriétaire

Catégorie
Instruments de musique
Taper
Le manuel du propriétaire

Ce manuel convient également à

Setting UpReferenceAppendix Quick Guide
EN
Owners Manual
Owner’s Manual
2
SPECIAL MESSAGE SECTION
This product utilizes batteries or an external power supply (adapter).
DO NOT connect this product to any power supply or adapter other
than one described in the manual, on the name plate, or specifically
recommended by Yamaha.
WARNING:
Do not place this product in a position where anyone could
walk on, trip over, or roll anything over power or connecting cords of any
kind. The use of an extension cord is not recommended! If you must use an
extension cord, the minimum wire size for a 25’ cord (or less) is 18 AWG.
NOTE: The smaller the AWG number, the larger the current handling
capacity. For longer extension cords, consult a local electrician.
This product should be used only with the components supplied or; a
cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is
used, please observe all safety markings and instructions that accom-
pany the accessory product.
SPECIFICATIONS SUBJECT TO CHANGE:
The information contained in this manual is believed to be correct at
the time of printing. However, Yamaha reserves the right to change or
modify any of the specifications without notice or obligation to update
existing units.
This product, either alone or in combination with an amplifier and
headphones or speaker/s, may be capable of producing sound levels
that could cause permanent hearing loss. DO NOT operate for long
periods of time at a high volume level or at a level that is uncomfort-
able. If you experience any hearing loss or ringing in the ears, you
should consult an audiologist.
IMPORTANT: The louder the sound, the shorter the time period before
damage occurs.
Some Yamaha products may have benches and / or accessory
mounting fixtures that are either supplied with the product or as
optional accessories. Some of these items are designed to be dealer
assembled or installed. Please make sure that benches are stable and
any optional fixtures (where applicable) are well secured BEFORE
using.
Benches supplied by Yamaha are designed for seating only. No other
uses are recommended.
NOTICE:
Service charges incurred due to a lack of knowledge relating to how a
function or effect works (when the unit is operating as designed) are
not covered by the manufacturer’s warranty, and are therefore the
owners responsibility. Please study this manual carefully and consult
your dealer before requesting service.
ENVIRONMENTAL ISSUES:
Yamaha strives to produce products that are both user safe and envi-
ronmentally friendly. We sincerely believe that our products and the
production methods used to produce them, meet these goals. In keep-
ing with both the letter and the spirit of the law, we want you to be
aware of the following:
Battery Notice:
This product MAY contain a small non-rechargeable battery which (if
applicable) is soldered in place. The average life span of this type of bat-
tery is approximately five years. When replacement becomes necessary,
contact a qualified service representative to perform the replacement.
This product may also use “household” type batteries. Some of these
may be rechargeable. Make sure that the battery being charged is a
rechargeable type and that the charger is intended for the battery being
charged.
When installing batteries, never mix old batteries with new ones, and
never mix different types of batteries. Batteries MUST be installed cor-
rectly. Mismatches or incorrect installation may result in overheating and
battery case rupture.
Warning:
Do not attempt to disassemble, or incinerate any battery. Keep all bat-
teries away from children. Dispose of used batteries promptly and as
regulated by the laws in your area. Note: Check with any retailer of
household type batteries in your area for battery disposal information.
Disposal Notice:
Should this product become damaged beyond repair, or for some rea-
son its useful life is considered to be at an end, please observe all
local, state, and federal regulations that relate to the disposal of prod-
ucts that contain lead, batteries, plastics, etc. If your dealer is unable
to assist you, please contact Yamaha directly.
NAME PLATE LOCATION:
The name plate is located on the bottom of the product. The model
number, serial number, power requirements, etc., are located on this
plate. You should record the model number, serial number, and the
date of purchase in the spaces provided below and retain this manual
as a permanent record of your purchase.
Model
Serial No.
Purchase Date
PLEASE KEEP THIS MANUAL
92-BP (bottom)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions con-
tained in this manual, meets FCC requirements. Modifications not
expressly approved by Yamaha may void your authority, granted by
the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/
or another product use only high quality shielded cables. Cable/s
supplied with this product MUST be used. Follow all installation
instructions. Failure to follow instructions could void your FCC
authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with the
requirements listed in FCC Regulations, Part 15 for Class “B” digital
devices. Compliance with these requirements provides a reason-
able level of assurance that your use of this product in a residential
environment will not result in harmful interference with other elec-
tronic devices. This equipment generates/uses radio frequencies
and, if not installed and used according to the instructions found in
the users manual, may cause interference harmful to the operation
of other electronic devices. Compliance with FCC regulations does
not guarantee that interference will not occur in all installations. If
this product is found to be the source of interference, which can be
determined by turning the unit “OFF” and “ON”, please try to elimi-
nate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by
the interference.
Utilize power outlets that are on different branch (circuit breaker or
fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead, change the
lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory results,
please contact the local retailer authorized to distribute this type of
product. If you can not locate the appropriate retailer, please con-
tact Yamaha Corporation of America, Electronic Service Division,
6600 Orangethorpe Ave, Buena Park, CA90620
The above statements apply ONLY to those products distributed by
Yamaha Corporation of America or its subsidiaries.
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)
FCC INFORMATION (U.S.A.)
Owner’s Manual
3
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and elec-
tronic products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable col-
lection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any
potential negative effects on human health and the environment which could otherwise arise from inappropriate
waste handling.
For more information about collection and recycling of old products and batteries, please contact your local munici-
pality, your waste disposal service or the point of sale where you purchased the items.
[For business users in the European Union]
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further informa-
tion.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please contact your local
authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set
by the Directive for the chemical involved.
(weee_battery_eu_en)
OBSERVERA!
Apparaten kopplas inte ur växelströmskällan (nätet) så länge
som den ar ansluten till vägguttaget, även om själva apparaten
har stängts av.
ADVARSEL: Netspændingen til dette apparat er IKKE
afbrudt, sålæenge netledningen siddr i en stikkontakt, som er t
endt — også selvom der or slukket på apparatets afbryder.
VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita
koko laitetta verkosta.
(standby)
The serial number of this product may be found on the bottom
of the unit. You should note this serial number in the space
provided below and retain this manual as a permanent record
of your purchase to aid identification in the event of theft.
Model No.
Serial No.
(bottom)
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party : Yamaha Corporation of America
Address : 6600 Orangethorpe Ave., Buena Park,
Calif. 90620
Telephone : 714-522-9011
Type of Equipment : Digital Keyboard
Model Name : NP-V80/NP-V60
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including
interference that may cause undesired operation.
See user manual instructions if interference to radio reception is
suspected.
* This applies only to products distributed by
YAMAHA CORPORATION OF AMERICA.
(FCC DoC)
IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
IMPORTANT. The wires in this mains lead are coloured in
accordance with the following code:
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this apparatus
may not correspond with the coloured makings identifying the
terminals in your plug proceed as follows:
The wire which is coloured BLUE must be connected to the ter-
minal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth terminal
of the three pin plug.
* This applies only to products distributed by
Yamaha Music U.K. Ltd.
(2 wires)
Owner’s Manual
4
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-
circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
Do not place the power cord near heat sources such as heaters or radiators, and
do not excessively bend or otherwise damage the cord, place heavy objects on it,
or place it in a position where anyone could walk on, trip over, or roll anything
over it.
Only use the voltage specified as correct for the instrument. The required voltage
is printed on the name plate of the instrument.
Use the specified adaptor (page 97) only. Using the wrong adaptor can result in
damage to the instrument or overheating.
Check the electric plug periodically and remove any dirt or dust which may have
accumulated on it.
This instrument contains no user-serviceable parts. Do not open the instrument
or attempt to disassemble or modify the internal components in any way. If it
should appear to be malfunctioning, discontinue use immediately and have it
inspected by qualified Yamaha service personnel.
Do not expose the instrument to rain, use it near water or in damp or wet
conditions, or place containers on it containing liquids which might spill into any
openings. If any liquid such as water seeps into the instrument, turn off the power
immediately and unplug the power cord from the AC outlet. Then have the
instrument inspected by qualified Yamaha service personnel.
Never insert or remove an electric plug with wet hands.
Do not put burning items, such as candles, on the unit.
A burning item may fall over and cause a fire.
Always replace all batteries at the same time. Do not use new batteries together
with old ones.
Do not mix battery types, such as alkaline batteries with manganese batteries, or
batteries from different makers, or different types of batteries from the same
maker, since this can cause overheating, fire, or battery fluid leakage.
Do not tamper with or disassemble batteries.
Do not dispose of batteries in fire.
Do not attempt to recharge batteries that are not intended to be charged.
Keep batteries away from children.
If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid
should come in contact with your eyes, mouth, or skin, wash immediately with
water and consult a doctor. Battery fluid is corrosive and may possibly cause loss
of sight or chemical burns.
Always make sure all batteries are inserted in conformity with the +/- polarity
markings. Failure to do so might result in overheating, fire, or battery fluid
leakage.
When the batteries run out, or if the instrument is not to be used for a long time,
remove the batteries from the instrument to prevent possible leakage of the battery
fluid.
When one of the following problems occur, immediately turn off the power switch
and disconnect the electric plug from the outlet. (If you are using batteries,
remove all batteries from the instrument.) Then have the device inspected by
Yamaha service personnel.
• The power cord or plug becomes frayed or damaged.
• It emits unusual smells or smoke.
• Some object has been dropped into the instrument.
• There is a sudden loss of sound during use of the instrument.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the
instrument or other property. These precautions include, but are not limited to, the following:
Do not connect the instrument to an electrical outlet using a multiple-connector.
Doing so can result in lower sound quality, or possibly cause overheating in the
outlet.
When removing the electric plug from the instrument or an outlet, always hold the
plug itself and not the cord. Pulling by the cord can damage it.
Remove the electric plug from the outlet when the instrument is not to be used for
extended periods of time, or during electrical storms.
Do not place the instrument in an unstable position where it might accidentally
fall over.
Before moving the instrument, remove all connected cables.
When setting up the product, make sure that the AC outlet you are using is easily
accessible. If some trouble or malfunction occurs, immediately turn off the power
switch and disconnect the plug from the outlet. Even when the power switch is
turned off, electricity is still flowing to the product at the minimum level. When
you are not using the product for a long time, make sure to unplug the power cord
from the wall AC outlet.
Use only the stand specified for the instrument. When attaching the stand or rack,
use the provided screws only. Failure to do so could cause damage to the internal
components or result in the instrument falling over.
Before connecting the instrument to other electronic components, turn off the
power for all components. Before turning the power on or off for all components,
set all volume levels to minimum.
Be sure to set the volumes of all components at their minimum levels and
gradually raise the volume controls while playing the instrument to set the desired
listening level.
Do not insert a finger or hand in any gaps on the instrument.
Never insert or drop paper, metallic, or other objects into the gaps on the panel or
keyboard.
Do not rest your weight on, or place heavy objects on the instrument, and do not
use excessive force on the buttons, switches or connectors.
Do not use the instrument/device or headphones for a long period of time at a
high or uncomfortable volume level, since this can cause permanent hearing loss.
If you experience any hearing loss or ringing in the ears, consult a physician.
Power supply/AC power adaptor
Do not open
Water warning
Fire warning
Battery
If you notice any abnormality
Power supply/AC power adaptor
Location
Connections
Handling caution
(7)-1 1/2
Owner’s Manual
5
Always turn the power off when the instrument is not in use.
Even when the [ ](Standby/On) switch is standby (the LCD backlight is off), electricity is still flowing to the instrument at the minimum level. When you are not using the
instrument for a long time, make sure you unplug the power cord from the wall AC outlet.
Make sure to discard used batteries according to local regulations.
NOTICE
To avoid the possibility of damage to the product, data or other property, follow the notices below.
Handling and Maintenance
Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio
may generate noise.
Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day)
to prevent the possibility of panel disfiguration or damage to the internal components.
Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.
When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.
Saving data
Some data items (page 50) are automatically saved as backup data in the internal memory even if you turn the power off. Saved data may be lost due to
malfunction or incorrect operation. Save important data to a USB storage device (NP-V80 only)/or other external device such as a computer (page 88).
(NP-V80 only) To protect against data loss through media damage, we recommend that you save your important data onto two USB storage devices/or other external device
such as a computer.
About copyrights
Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal
use.
This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use
others’ copyrights. Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and
sound recordings. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of
copyright has legal consequences. DON’T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.
About functions/data bundled with the instrument
Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original.
About this manual
The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your
instrument.
Windows is a registered trademark of Microsoft
®
Corporation in the United States and other countries.
The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
(7)-1 2/2
Owner’s Manual
6
Logos
GM System Level 1
“GM System Level 1” is an addition to the MIDI standard which ensures that any GM-compatible
music data can be accurately played by any GM-compatible tone generator, regardless of manufacturer.
The GM mark is affixed to all software and hardware products that support GM System Level.
XGlite
As its name implies, “XGlite” is a simplified version of Yamaha’s high-quality XG tone generation for-
mat. Naturally, you can play back any XG song data using an XGlite tone generator. However, keep in
mind that some songs may play back differently compared to the original data, due to the reduced set of
control parameters and effects.
USB
USB is an abbreviation for Universal Serial Bus. It is a serial interface for connecting a computer with
peripheral Devices. It allows “hot swapping” (connecting peripheral devices while the power to the
computer is on).
STYLE FILE
The Style File Format is Yamaha’s original style file format which uses a unique conversion system to
provide high-quality automatic accompaniment based on a wide range of chord types.
Owner’s Manual
7
About this Owner’s Manual and Data List
This manual consists of four main sections: “Setting Up,” “Quick Guide,” “Reference,” and “Appendix.
Also, a separate “Data List” is provided.
Owners Manual (this book)
Data List
Voice List, MIDI Data Format, etc.
MIDI Reference
The MIDI Reference section contains MIDI related information. The MIDI Reference is available for
downloading from the Yamaha Manual Library at: http://www.yamaha.co.jp/manual/
Included Accessories
The package includes the following items. Please check that you have them all.
• AC Power Adaptor
* May not be included depending on your particular area.
Please check with your Yamaha dealer.
• Owner’s Manual
• Music rest
• Accessory CD-ROM
• Footswitch (NP-V80 only)
• Data List
• My Yamaha Product User Registration
* The PRODUCT ID on the sheet will be needed when
you fill out the User Registration form.
Setting Up
• • • • • • • • •
Please read this section first.
This section explains how to use the basic functions. Refer to this
section while playing the instrument.
Quick Guide
• • • • • • • • •
Reference
• • • • • • • • •
This section explains how to make detailed settings for the instru-
ment’s various functions.
Appendix
• • • • • • • • •
This section includes troubleshooting information and specifica-
tions.
Insert the music
rest into the slots
as shown.
Music Rest
Owner’s Manual
8
Special Features
Graded Soft Touch keyboard
Just as on an actual piano, the lower keys are heavy in touch and the higher keys
are light, with soft touch of digital keyboard for beginners.
Play a Variety of Instrument Voices
Page 16
The instrument voice that sounds when you play the keyboard can be changed to
violin, flute, harp, or any of an extensive range of voices. You can change the
mood of a song written for piano, for example, by using violin to play it instead.
Experience a whole new world of musical variety.
Play Along with Styles
Page 23
Want to play with full accompaniment? Try the auto-accompaniment Styles.
The accompaniment styles provide the equivalent of a full backing band cover-
ing a wide variety of styles from waltzes to 8-beat to euro-trance ... and much
more. Select a style that matches the music you want to play, or experiment with
new styles to expand your musical horizons.
Using Songs
Page 26
You can simply enjoy listening to the 30 internal songs, or use them with just
about any of the many functions provided—the performance assistant technol-
ogy feature, lessons, and more.
Arpeggio Function (NP-V80 only)
Page 20
Similar to the arpeggio functions provided on some synthesizers, this function
automatically produces arpeggios (broken chords) when you simply play the
appropriate notes on the keyboard. A variety of arpeggios can be produced by
changing your fingering or the arpeggio type.
042
EuTrance
Owner’s Manual
9
Quick GuideReferenceAppendix Setting Up
Contents
About this Owner’s Manual and Data List ........................7
Included Accessories .......................................................7
Special Features ..............................................................8
Setting Up
Setting Up 10
Power Requirements......................................................10
Connecting Headphones (PHONES/OUTPUT Jack).....11
Connecting a Footswitch or a Foot Pedal
(SUSTAIN Jack).............................................................11
Turning the Power On ....................................................11
Panel Controls and Terminals 12
Basic Operation and Displays 14
Quick Guide
Try Playing a Variety of Instrument Voices 16
Select and Play a Voice—MAIN.....................................16
Play the Grand Piano Voice ...........................................17
Play Two Voices Simultaneously—DUAL ......................18
Play Different Voices with the Left and Right Hands
—SPLIT..........................................................................18
Using the Metronome.....................................................19
Creating Arpeggios (NP-V80 only) 20
Use the Arpeggio Function.............................................20
Changing the Arpeggio type...........................................21
Playing Styles 22
Select a Style Rhythm....................................................22
Play Along with a Style...................................................23
Playing Songs 26
Select and Listen to a Song ...........................................26
Select and Play Songs on a USB Flash Memory
(NP-V80 only).................................................................28
Play Songs in Sequence ................................................29
Song Fast Forward, Fast Reverse, and Pause ..............29
Reference
Select a Song For a Lesson 30
The Easy Way to Play Piano 34
Play Using the Music Database 40
Change a Song’s Style 41
Record Your Own Performance 43
Memorize Your Favorite Panel Settings 48
Backup and Initialization 50
Backup ...........................................................................50
Initialization ....................................................................50
Handy Performance Features 51
Adding Reverb ...............................................................51
Adding Chorus ...............................................................51
Panel Sustain .................................................................52
Pitch Controls (Transpose).............................................52
Pitch Controls (Tuning) ..................................................53
Setting the Metronome Time Signature..........................53
Adjusting the Metronome Volume..................................54
Pitch Bend......................................................................54
One Touch Setting .........................................................54
Select an EQ Setting for the Best Sound.......................55
Auto Power Off Setup ....................................................55
Voice Settings 56
Voice Editing ..................................................................56
Selecting a Dual Voice...................................................57
Selecting a Split Voice ...................................................57
Touch Response Sensitivity (NP-V80)...........................58
Touch Response Sensitivity (NP-V60)...........................58
Harmony ........................................................................59
Arpeggio Settings (NP-V80 only) 60
Controlling Arpeggio Volume with Keyboard Dynamics
...60
Synchronizing an arpeggio to a tempo of Style or Song
...60
Holding the arpeggio Playback ......................................61
Style (Auto-accompaniment) Functions 62
Pattern Variation (Sections) ...........................................62
Changing the tempo of the Style....................................64
Adjusting the Style Volume ............................................64
Setting the Split Point.....................................................65
Tap Start ........................................................................65
Play a Style with Chords but No Rhythm
(Stop Accompaniment) ..................................................66
Playing Styles Using the Entire Keyboard......................66
Loading Style Files (NP-V60).........................................67
Looking Up Chords Using the Chord Dictionary ............68
Song Settings 69
BGM Playback ...............................................................69
Random Song Playback ................................................69
Changing the tempo of the Song ...................................70
Song Volume .................................................................70
A-B Repeat ....................................................................71
Muting Independent Song Tracks ..................................71
Tap Start ........................................................................72
Change the Melody Voice..............................................72
The Functions 73
Selecting and Setting Functions ....................................73
Saving and Loading Data (NP-V80 Only) 76
File Control Functions ....................................................76
Precautions when using the [USB TO DEVICE]
terminal ..........................................................................77
Using USB Storage Devices ..........................................77
Connecting to a Computer 84
Connecting a Personal Computer..................................84
Transferring Performance Data to and from a Computer
...85
Transferring Data between the Computer and Instrument
...86
Accessory CD-ROM Installation Guide 89
Important Notices about the CD-ROM ...........................89
CD-ROM Contents.........................................................90
System Requirements....................................................91
Software Installation.......................................................91
Appendix
Troubleshooting 96
Specifications 97
Index 98
Owner’s Manual
10
Setting Up
Setting Up
Be sure to do the following operations BEFORE turning on the power.
Power Requirements
Although the instrument will run either from an optional AC adaptor or batteries, Yamaha recommends use of an
AC adaptor whenever possible. An AC adaptor is more environmentally friendly than batteries and does not deplete
resources. USB flash memory save, delete, and format operations can only be performed on the NP-V80 when the
instrument is being powered from an AC adapter. These operations cannot be performed using battery power.
Using an AC Power Adaptor
1 Connect the AC adaptor to the power supply jack.
2 Plug the AC adaptor into an AC outlet.
Using Batteries
1 Open the battery compartment cover located on the
instrument’s bottom panel.
2 Insert the six new batteries, being careful to follow
the polarity markings on the inside of the compart-
ment.
3 Replace the compartment cover, making sure that it
locks firmly in place.
For battery operation the instrument requires six 1.5V
AA” size, LR6 or equivalent batteries. (Alkaline bat-
teries are recommended.) When battery power becomes
too low for proper operation, make sure to replace all
batteries, following the precautions listed below.
If necessary, also make sure to save all important User
data (see pages 50, 88).
• Use the specified adaptor (page 97). The use of other
adaptors may result in irreparable damage to both the
adaptor and the instrument.
• Unplug the AC Power Adaptor when not using the
instrument, or during electrical storms.
• Connecting the AC power adaptor automatically supplies
power from the adaptor and overrides battery power, even
when batteries are installed.
WARNING
CAUTION
AC outlet
AC power
adaptor
2
1
NOTE
• Be sure to install the batteries in the same direction, main-
taining the correct polarity (as shown). Incorrect battery
installation may result in heat, fire and/or leaking of corro-
sive chemicals.
• When the batteries run down, replace them with a com-
plete set of six new batteries. NEVER mix old and new bat-
teries. Do not use different kinds of batteries (e.g. alkaline
and manganese) at the same time.
• If the instrument will not be used for an extended period of
time, remove the batteries to prevent possible fluid leakage.
• The use of alkaline batteries is recommended for this
instrument. Other types of batteries may exhibit a sudden
drop in power when the batteries are low, possibly result-
ing in a loss of flash memory data.
• Please use the power adaptor when transferring data to
flash memory. Batteries (including rechargeable types) can
be drained rapidly by this type of operation. If the batteries
do become drained during a data transfer, both the data
being transferred and the data currently in the transfer des-
tination will be lost.
CAUTION
NOTICE
Setting Up
Setting Up
Owner’s Manual
11
Setting Up
Make all necessary connections below BEFORE turning the power on.
Connecting Headphones
(PHONES/OUTPUT Jack)
Any pair of stereo headphones with a 1/4" stereo
phone plug can be plugged in here for convenient
monitoring. The speakers are automatically shut off
when a plug is inserted into this jack.
The PHONES/OUTPUT jack also functions as an
external output. You can connect the PHONES/OUT-
PUT jack to a keyboard amplifier, stereo system,
mixer, tape recorder, or other line-level audio device
to send the instrument’s output signal to that device.
Connecting a Footswitch or a
Foot Pedal (SUSTAIN Jack)
The SUSTAIN jack is for connecting the footswitch or
foot pedal. The pedal functions in the same way as a
damper pedal on an acoustic piano. Connect an
included footswitch (NP-V80 only) or an optional
footswitch FC4/FC5 to this jack and press the pedal to
sustain the sound. An optional FC3 foot pedal can
also be connected to this jack.
If you connect an optional pedal of FC3, the half
pedal function* can be used.
* half pedal function
While you playing the piano with SUSTAIN and if you need to
delete the cloudy sound, release the foot from pedal to half posi-
tion.
Turning the Power On
The [ ](Standby/On) switch turns the power to the
instrument on or standby. Turn down the volume by
turning the [MASTER VOLUME] control to the left
and press the [ ](Standby/On) switch to turn on the
power. Press the [ ](Standby/On) switch again to
turn the power standby.
While playing the keyboard, adjust the volume level
by using the [MASTER VOLUME] control.
• Avoid listening with the headphones at high volume for
long periods of time; doing so may not only result in ear
fatigue, it may be damaging to your hearing.
• To prevent damage to the speakers, set the volume of the
external devices at the minimum setting before connecting
them. Failure to observe these cautions may result in elec-
tric shock or equipment damage. Also, be sure to set the
volumes of all devices at their minimum levels and gradu-
ally raise the volume controls while playing the instrument
to set the desired listening level.
WARNING
CAUTION
• The sustain function does not affect split voices.
• Make sure that power is OFF when connecting or discon-
necting the pedal.
• Do not press the pedal while turning the power on. Other-
wise, the switch or pedal type (on/off) will be reversed.
• Even when the switch is standby, electricity is still flowing
to the instrument at the minimum level. When you are not
using the instrument for a long time, make sure you
unplug the AC power adaptor from the wall AC outlet, and/
or remove the batteries from the instrument.
NOTE
CAUTION
Owner’s Manual
12
Setting Up
Panel Controls and Terminals
Front Panel
q [ ](Standby/On) switch...................... page 11
w [MASTER VOLUME] control ................ page 11
e [DEMO/BGM] button ............................page 29
r [REC] button.........................................page 43
t [1]–[5], [A] buttons ...............................page 44
LESSON
[RIGHT] button..................................page 30
[LEFT] button ....................................page 30
y LESSON START
[WAITING] button..............................page 30
[YOUR TEMPO] button .....................page 32
[MINUS ONE] button.........................page 33
u [METRONOME ON/OFF] button .. pages 19, 53
i [TEMPO/TAP] button.. pages 19, 64, 65, 70, 72
o [P.A.T. ON/OFF] button ........................page 35
!0 [EASY SONG ARRANGER] button......page 41
!1 SONG
[REPEAT&LEARN] button................ page 33
[A-B REPEAT] button .......................page 71
[REW] button ....................................page 29
[FF] button ........................................page 29
[PAUSE] button ................................. page 29
[START/STOP] button....................... page 27
!2 STYLE
[ACMP ON/OFF] button.................... page 23
[INTRO/ENDING/rit.] button .............page 63
[MAIN/AUTO FILL] button ................page 63
[SYNC STOP] button ........................ page 63
[SYNC START] button....................... page 62
[START/STOP] button....................... page 22
!3 [SONG] button...................................... page 26
!4 [STYLE] button..................................... page 22
!5 [VOICE] button ..................................... page 16
!6 [MUSIC DATABASE] button.................page 40
Li
q
e
r
t y
u
i
o !0
w
!1
!2
@6
Front Panel
Display (page 15)
The panel illustrations shown in this owners manual are taken from the NP-V80.
Panel Controls and Terminals
Owner’s Manual
13
Setting Up
!7 [FUNCTION] button..............................page 73
!8 [GRAND PIANO] button.......................page 17
!9 REGIST [MEMORY/BANK],
[1]–[4] buttons ......................................page 48
@0 CATEGORY [] and []
buttons .......................................... pages 14, 73
@1 DATA ENTRY
Dial, Number buttons [0]–[9],
[+] and [-] buttons .............................page 14
@2 [ARPEGGIO ON/OFF] button
(NP-V80 only) .......................................page 20
[TOUCH ON/OFF] button
(NP-V60 only) .......................................page 58
@3 [DUAL ON/OFF] button ................ pages 18, 57
@4 [SPLIT ON/OFF] button................ pages 18, 57
@5 [HARMONY ON/OFF] button ...............page 59
@6 PITCH BEND wheel..............................page 54
@7 USB TO DEVICE terminal
(NP-V80 only) .......................................page 76
Rear Panel
@8 USB TO HOST terminal ....................... page 84
@9 SUSTAIN jack ....................................... page 11
#0 PHONES/OUTPUT jack........................ page 11
#1 DC IN jack............................................. page 10
f
r
iveGPno
@8 @9 #0 #1
!3
!8
!99
!4 !5
!6 !7
@3
@4
@5
@0 @1
@2
@7
Rear Panel
NP-V60
[TOUCH ON/OFF] button
Owner’s Manual
14
Setting Up
Basic Operation and Displays
Basic Operation
Press a button to select a basic function: Voice, Style or Song. To change the instrument voice that sounds when
you play the keyboard, press the [VOICE] button. If you want to play along with auto accompaniment, press the
[STYLE] button. If you want to listen to a song, press the [SONG] button.
LiveGPno
f
r
f
r
Basic Operation and Displays
Owner’s Manual
15
Setting Up
Display Items
The display shows all of the current basic settings: song, style, voice.
It also includes a range of indicators that show the on/off status of a range of functions.
001
001
LiveGPno
NOTE
001
Owner’s Manual
16
Quick Guide
Try Playing a Variety of Instrument Voices
In addition to piano, organ, and other “standard” keyboard instruments, this instru-
ment has a large range of voices that includes guitar, bass, strings, sax, trumpet,
drums and percussion, sound effects … a wide variety of musical sounds.
This procedure selects the main voice you will play on the keyboard.
1
Press the [VOICE] button.
The voice number and name will be displayed.
2
Select the voice you want to play.
While watching the displayed voice name rotate the dial. The avail-
able voices will be selected and displayed in sequence. The voice
selected here becomes the main voice.
For this example select the “102 Flute” voice.
Preset Voice Types (NP-V80)
Preset Voice Types (NP-V60)
Select and Play a Voice—MAIN
001
LiveGPno
You can also select the voice
using the CATEGORY [ ]
and [ ] buttons after press-
ing the [VOICE] button.
(page 14)
NOTE
f
r
102
Flute
001–127 Instrument Voices
128–139
(Drum Kit)
Various drum and percussion sounds are assigned to
individual keys, via which they can be played. Details
on assigning instruments to keys are provided in the
Drum Kit List of the separate Data List.
001–116 Instrument Voices
117–128
(Drum Kit)
Various drum and percussion sounds are assigned to
individual keys, via which they can be played. Details
on assigning instruments to keys are provided in the
Drum Kit List of the separate Data List.
Quick Guide
Quick Guide
Try Playing a Variety of Instrument Voices
Owner’s Manual
17
3
Play the keyboard.
Try selecting and playing a variety of voices.
When you just want to play piano, all you have to do is press one convenient button.
Press the [GRAND PIANO] button.
The Grand Piano voice will be selected.
• Voice Settings (page 56)
NOTE
Play the Grand Piano Voice
• When you press the
[GRAND PIANO] button all
settings other than touch
sensitivity are turned off. The
dual and split voices will
also be turned off, so only
the Grand Piano voice will
play over the entire key-
board.
NOTE
Try Playing a Variety of Instrument Voices
Owner’s Manual
18
Quick Guide
Once you press the [DUAL ON/OFF] button to turn the dual function on, a second voice will sound
that will play in addition to the main voice when you play the keyboard. The second voice is known as
the “dual” voice.
Press the button a second time to turn the dual voice function off. A suitable
dual voice is automatically selected when you turn on this function, but you
can easily select a different dual voice (page 57).
Once you press the [SPLIT ON/OFF] button to turn the split function on, you can play different voices
to the left and right of the keyboard “split point”. The main and dual voices can be played to the right of
the split point, while the voice played to the left of the split point is known as the “split voice”. The
split point setting can be changed as required (page 65).
Press the button a second time to turn the split voice function off. A suitable
split voice is automatically selected when you turn on this function, but you
can easily select a different split voice (page 57).
Play Two Voices Simultaneously—DUAL
102
Flute
Play Different Voices with the Left and Right Hands—SPLIT
102
Flute
Quick Guide
Try Playing a Variety of Instrument Voices
Owner’s Manual
19
The instrument features a built-in metronome (a device that keeps an accurate tempo) that is convenient
for practicing.
Press the [METRONOME ON/OFF] button to start the metronome. To stop
the metronome, press the [METRONOME ON/OFF] button again.
If you want to adjust the metronome tempo, press the [TEMPO/TAP] button
to call up the Tempo setting in the display, then you can use the dial to set
the tempo. You can also set the tempo using the number buttons on the front
panel.
You can set the time signature (page 53).
Using the Metronome
001
LiveGPno
4
• You can set the time signa-
ture (page 53).
NOTE
090
Tempo
Current Tempo value
Owner’s Manual
20
Quick Guide
Creating Arpeggios (NP-V80 only)
The arpeggio function lets you create arpeggios (broken chords) by simply playing the
required notes on the keyboard. For example, you could play the notes of a triad—the
root, third, and fifth—and the arpeggio function will automatically create a variety of
interesting arpeggio-type phrases. By changing the arpeggio type and the notes you
play it is possible to create a wide range of patterns and phrases that can be used for
music production as well as performance.
1
Press the [ARPEGGIO ON/OFF] button to turn the
arpeggio function on.
The button lights when the Arpeggio function is on.
2
Play a note or notes on the keyboard to trigger
Arpeggio playback.
The sound of the arpeggio produced will change according to the
number of notes you play and the area of the keyboard you play in.
When the split function is on, the arpeggio applies to the split voice.
The arpeggio applies to the main and dual voices when the split func-
tion is off. Arpeggios cannot be played using the split and main/dual
voices simultaneously.
3
When you have finished playing with the arpeggio
function, press the [ARPEGGIO ON/OFF] button to
turn it off.
Use the Arpeggio Function
• When an FC4 or FC5 foot-
switch is connected to the
SUSTAIN jack is pressed,
the Arpeggio will continue to
play after the note is
released (page 61).
NOTE
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104

Yamaha 60 Le manuel du propriétaire

Catégorie
Instruments de musique
Taper
Le manuel du propriétaire
Ce manuel convient également à