Aaeon RTC-710RK Manuel utilisateur

Last Updated: June 30, 2023

RTC-710RK

Rugged Tablet Computer

User’s Manual 4th Ed

Preface II

Rugged Tablet Computer RTC-710RK

Copyright Notice

This document is copyrighted, 2023. All rights are reserved. The original manufacturer

reserves the right to make improvements to the products described in this manual at

any time without notice.

No part of this manual may be reproduced, copied, translated, or transmitted in any

form or by any means without the prior written permission of the original

manufacturer. Information provided in this manual is intended to be accurate and

reliable. However, the original manufacturer assumes no responsibility for its use, or for

any infringements upon the rights of third parties that may result from its use.

The material in this document is for product information only and is subject to change

without notice. While reasonable efforts have been made in the preparation of this

document to assure its accuracy, AAEON assumes no liabilities resulting from errors or

omissions in this document, or from the use of the information contained herein.

AAEON reserves the right to make changes in the product design without notice to its

users.

Preface III

Rugged Tablet Computer RTC-710RK

Acknowledgement

All other product names or trademarks are properties of their respective owners.

⚫ Rockchip is a registered trademark of Rockchip Electronics Co., Ltd.

⚫ Arm® and Cortex® are registered trademarks of Arm Limited (or its

subsidiaries) in the US and/or elsewhere

⚫ Android™ is a trademark of Google LLC

⚫ Bluetooth® is a registered trademark of the Bluetooth Special Interest Group

(SIG)

All other product names or trademarks are properties of their respective owners.

Preface IV

Rugged Tablet Computer RTC-710RK

Packing List

Before setting up your product, please make sure the following items have been

shipped:

Item

Quantity

⚫ RTC-710RK

1

⚫ 12V Power Adapter (Power Cord ordered separately)

1

If any of these items are missing or damaged, please contact your distributor or sales

representative immediately.

Preface V

Rugged Tablet Computer RTC-710RK

About this Document

This User’s Manual contains all the essential information, such as detailed descriptions

and explanations on the product’s hardware and software features (if any), its

specifications, dimensions, jumper/connector settings/definitions, and driver

installation instructions (if any), to facilitate users in setting up their product.

Users may refer to the product page at AAEON.com for the latest version of this

document.

Preface VI

Rugged Tablet Computer RTC-710RK

Safety Precautions

Please read the following safety instructions carefully. It is advised that you keep this

manual for future references

1. All cautions and warnings on the device should be noted.

2. Make sure the power source matches the power rating of the device.

3. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

4. Always completely disconnect the power before working on the system’s

hardware.

5. No connections should be made when the system is powered as a sudden rush

of power may damage sensitive electronic components.

6. If the device is not to be used for a long time, disconnect it from the power

supply to avoid damage by transient over-voltage.

7. Always disconnect this device from any AC supply before cleaning.

8. While cleaning, use a damp cloth instead of liquid or spray detergents.

9. Make sure the device is installed near a power outlet and is easily accessible.

10. Keep this device away from humidity.

11. Place the device on a solid surface during installation to prevent falls

12. Watch out for high temperatures when the system is running.

13. Never pour any liquid into the openings. This could cause fire or electric shock.

14. As most electronic components are sensitive to static electrical charge, be sure

to ground yourself to prevent static charge when installing the internal

components. Use a grounding wrist strap and contain all electronic components

in any static-shielded containers.

15. If any of the following situations arises, please the contact our service personnel:

i. Damaged power cord or plug

Preface VII

Rugged Tablet Computer RTC-710RK

ii. Liquid intrusion to the device

iii. Exposure to moisture

iv. Device is not working as expected or in a manner as described in

this manual

v. The device is dropped or damaged

vi. Any obvious signs of damage displayed on the device

16. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH

TEMPERATURES BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES

(SEE CHAPTER 1) TO PREVENT DAMAGE.

17. Do not use the battery pack if any part of it is protruding or inflated. Replace

with a new battery pack immediately.

18. If the battery pack cannot be charged (won’t hold a charge, system is unable to

charge it), replace the battery pack with a new one immediately.

Markings, Instructions, and Instructional Safeguards

Clause Title

Marking or Instructional Details

Protective earthing is

used as a safeguard

The equipment power supply cord must be connected to

a socket outlet with earthing connection, or equivalent

Preface VIII

Rugged Tablet Computer RTC-710RK

FCC Statement

This device complies with Part 15 FCC Rules. Operation is

subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept

any interference received including interference that may

cause undesired operation.

Caution:

There is a danger of explosion if the battery is incorrectly replaced. Replace only with the

same or equivalent type recommended by the manufacturer. Dispose of used batteries

according to the manufacturer’s instructions and your local government’s recycling or

disposal directives.

Attention:

Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.

Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le

constructeur. Recycler les batteries usées en accord avec les instructions du fabricant et

les directives gouvernementales de recyclage.

Preface IX

Rugged Tablet Computer RTC-710RK

China RoHS Requirements (CN)

产品中有毒有害物质或元素名称及含量

AAEON System QO4-381 Rev.A0

部件名称

有毒有害物质或元素

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯

醚(PBDE)

印刷电路板

及其电子组件

×

○

外部信号

连接器及线材

×

○

外壳

○

中央处理器

与内存

×

○

硬盘

×

○

液晶模块

×

○

光驱

×

○

触控模块

×

○

电源

×

○

电池

×

○

本表格依据 SJ/T 11364 的规定编制。

○

：表示该有毒有害物质在该部件所有均质材料中的含量均在

GB/T 26572标准规定的限量要求以下。

×：表示该有害物质的某一均质材料超出了GB/T 26572的限量要求，然而该

部件

仍符合欧盟指令2011/65/EU 的规范。

备注：

一、此产品所标示之环保使用期限，系指在一般正常使用状况下。

二、上述部件物质中央处理器、内存、硬盘、光驱、电源为选购品。

三、上述部件物质液晶模块、触控模块仅一体机产品适用。

Preface X

Rugged Tablet Computer RTC-710RK

China RoHS Requirement (EN)

Hazardous and Toxic Materials List

AAEON System QO4-381 Rev.A0

Component

Name

Hazardous or Toxic Materials or Elements

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

Chromium

(Cr(VI))

Polybrominat

ed biphenyls

(PBBs)

Polybrominat

ed diphenyl

ethers

(PBDEs)

PCB and

Components

X

O

Wires &

Connectors for

Ext.Connections

X

O

Chassis

O

CPU & RAM

X

O

HDD Drive

X

O

LCD Module

X

O

Optical Drive

X

O

Touch Control

Module

X

O

PSU

X

O

Battery

X

O

This form is prepared in compliance with the provisions of SJ/T 11364.

O: The level of toxic or hazardous materials present in this component and its parts is below the

limit specified by GB/T 26572.

X: The level of toxic of hazardous materials present in the component exceed the limits

specified by GB/T 26572, but is still in compliance with EU Directive 2011/65/EU (RoHS 2).

Notes:

1. The Environment Friendly Use Period indicated by labelling on this product is applicable only

to use under normal conditions.

2. Individual components including the CPU, RAM/memory, HDD, optical drive, and PSU are

optional.

3. LCD Module and Touch Control Module only applies to certain products which feature these

components.

 
 
Preface    XI 
Rugged  Tablet  Computer      RTC-710RK 
 
Table of Contents 
 
Chapter 1 - Product Specifications ........................................................................................ 1 
1.1 Specifications ............................................................................................................ 2 
Chapter 2 – Getting Started ................................................................................................... 6 
2.1 Product Overview ................................................................................................... 7 
2.2 Notes Before Use ................................................................................................... 11 
2.3 Turning on the Device .......................................................................................... 12 
2.4 Setting the Function Keys .................................................................................... 13 
2.5 Connecting to Ethernet........................................................................................ 16 
Chapter 3 – Accessories ....................................................................................................... 17 
3.1 Barcode Scanner ................................................................................................... 18 
Chapter 4 – Frequently Asked Questions ........................................................................... 19 
4.1 Frequently Asked Questions (FAQ) ................................................................... 20 
Appendix A - Statements ..................................................................................................... 22 
A.1 Statements ............................................................................................................. 23 
A.2 Canadian Notice ................................................................................................... 25 
A.3 Safety Caution ....................................................................................................... 26 
A.4 Battery Disposal .....................................................................................................27 
A.5 Battery Caution ..................................................................................................... 28 
A.6 Adapter Caution ................................................................................................... 30 
A.7 FCC Interference Statement ................................................................................ 31 
A.8 Regulatory Information and Disclaimers ......................................................... 32 
 

Rugged Tablet Computer RTC-710RK

Chapter 1

Chapter 1 - Product Specifications

Chapter 1 – Product Specifications 2

Rugged Tablet Computer RTC-710RK

1.1 Specifications

System

Processor

Rockchip RK3399K SoC (Quad-Core Arm Cortex-A53,

1.6 GHz & Dual-Core Arm Cortex-A72, 2.0 GHz)

Operating System

Android™ 8.1

Memory

Onboard LPDDR4, 2GB (Default)/4GB

Storage

eMMC 16GB (Default)/32GB/64GB

Display

7" WXGA (1280 x 800) 700 nit/300 nit TFT LCD

I/O Port

SIM Card Slot x 1

USB 3.2 Gen 1 (Type-C) x 1

Audio Jack x 1 (3.5mm)

DC-in Jack x 1

Micro SD Card Slot x 1

USB 2.0 (Type-A) x 1

UART Port x 1 (via I/O Module)

10/100/1000 Base-T RJ-45 x 1 (Via I/O Module)

Communication

Wi-Fi 802.11 b/g/n

Bluetooth v4.2 (EDR + BLE)

Navigation

GPS + GLONASS (Default)

BeiDou (Optional)

External Antenna (Optional)

WWAN (optional)

LTE via M.2 slot (Optional)

Note: Hot-swappable Battery cannot be used when LTE

module is installed.

Camera

8MP front camera

8MP rear camera with flash

Chapter 1 – Product Specifications 3

Rugged Tablet Computer RTC-710RK

System

Sensor

G-sensor

Gyro-sensor

Light-sensor

Expansion Slot

M.2 Key Slot x 1

Docking Connector: USB 3.2 Gen 1 x 1

Barcode Scanner (Optional)

2D Barcode scanner, OPTICON MDI-4100-USB via I/O

Module (Optional)

HF RFID (Optional)

ISO 15693 (R/W)

ISO 18092 (R/W)

ISO 14443-A (R/W)

ISO 14443-B (Only Read UID)

Dependent on Card Type

Physical Key

F1 (Audio On/Off)

F2 (Print Screen)

F3 (Barcode Scanner Trigger)

Volume Up

Volume Down

Mechanical

Color

Dark Grey

Dimension (W x H x D)

8.65" x 5.46" x 0.94" (219.8mm x 138.8mm x 23.9mm)

Gross Weight

1.52 lb. (0.69Kg) Based on Configuration

Chapter 1 – Product Specifications 4

Rugged Tablet Computer RTC-710RK

Environmental

Operating Temperature

(Charging)

32°F ~ 104°F (0°C ~ 40°C) for High-Brightness Version

Operating Temperature

(Discharging)

-4°F ~ 140°F (-20°C ~ 60°C) for High-Brightness

Version

Storage Temperature

-22°F ~ 158°F (-30°C ~ 70°C)

Humidity

MIL-STD-810G Method 507.5

Environmental Sealing

IP65

Vibration

MIL-STD-810G Method 514.6

Drop

MIL-STD-810G Method 516.6 Procedure IV Drop

Height: 48” (122cm)

Shock

MIL-STD-810G

ESD

Air charge: +/- 8KV

Contact charge: +/- 4KV

Certifications

UL62368-1, CE, FCC, IC

Power Supply

AC/DC Adapter

AC 100V ~ 240V, 50Hz ~ 60Hz

Output: 12V, 3.34A, 40W

Battery Life

Li-ion Battery 8-hour battery life based on test

configurations

Primary Battery

7.2V, 4540mAh, 32.7W

Secondary Battery

Hot-Swappable Battery: 7.4V, 1530mAh, 11.3W

(Optional)

Chapter 1 – Product Specifications 5

Rugged Tablet Computer RTC-710RK

Display

LCD

7” TFT-LCD/16:10, with LED backlight

Resolution

1280 x 800

Maximum Color

16.7M

Dot Size (H x V)

0.03925mm x 0.11775mm

Brightness

700/300 nits

Viewing Angle

Horizontal: 178°, Vertical: 178° (Typical)

Touch Screen

Touch Type

7" Projected Capacitive Multi-Touch Screen

(700 nits with 10 points/300 nits with 5 points)

Light Transmission

Min. 85%

Rugged Tablet Computer RTC-710RK

Chapter 2

Chapter 2 – Getting Started

Chapter 2 – Getting Started 7

Rugged Tablet Computer RTC-710RK

2.1 Product Overview

Front View

Function

Description

Light Sensor

Ambient Light Sensor

8MP Front Camera

HF RFID

High-Frequency RFID Reader; supports 13.56MHz freq.

Function Key x 5

Programable Function Keys:

F1 (Audio on/off)

F2 (Print Screen)

F3 (Barcode Scanner Trigger)

Volume Up, Volume Down

Chapter 2 – Getting Started 8

Rugged Tablet Computer RTC-710RK

Side View (Bottom-Left)

Function

Description

USB 3.2 Gen 1

USB Type-C

Micro-SD Card Slot

Audio Jack

3.5 mm Stereo Headphone jack

DC-in Jack

Input: DC 12V

Speaker

Audio Out Speaker

Docking Connector

RTC-710RK Connection for Docking Station

Kensington Lock

Device Lock

Chapter 2 – Getting Started 9

Rugged Tablet Computer RTC-710RK

Side View (Top-Right)

Function

Description

USB 2.0

Type A x 1

Nano SIM Card Slot

Power Button

(1) Power On or Shutdown Device

(2) Enter Sleep Mode

La page charge ...

Aaeon RTC-710RK Manuel utilisateur

Aaeon RTC-710RK Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents