Intermec AE8 Supplementary Manual

Taper
Supplementary Manual
1
AE8 Power Supply Compliance Insert
For Users in the United States and Canada
Users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories
other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the
compliance of this product and may result in the loss of the user’s authority to operate the equipment.
Utilisateurs de ce produit sont avisés d’utiliser des accessoires et des périphériques approuvés par Intermec Technologies Corporation.
L’utilisation d’accessoires autres que ceux recommandés ou des changements à ce produit qui ne sont pas approuvés par Intermec
Technologies Corporation peuvent annuler la conformité de ce produit et mettre fin au droit qu’a l’usager d’utiliser l'équipement.
FCC Digital Emissions Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the radio or television receiving antenna.
Increase the separation between the computer equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected.
Consult the dealer or an experienced radio television technician for help.
Canadian Digital Apparatus Compliance
These Class B digital products meet all requirements of the Canadian Interference-Causing Equipment Regulations.
Conformité aux normes canadiennes sur les appareils numériques
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouilleur du Canada.
Battery Information
Battery Recycling Information
Note: In the U.S.A., the EPA does not consider spent lead-acid batteries as hazardous waste.
Caution: This marking indicates that the user should read all included documentation before use.
Attention: Ce marquage indique que l’usager doit, avant l’utilisation, lire toute la documentation incluse.
Place this supplement in your manual.
Veuillez placer ce supplément dans votre manuel.
Caution: The battery pack used in this device may ignite, create a chemical burn hazard, explode, or release toxic
materials if mistreated. Do not incinerate, disassemble, or heat above 100°C (212°F). Do not short circuit; may cause
burns. Keep away from children.
Attention: Le bloc-piles utilisé dans cet appareil peut prendre feu, constituer un risque de brûlure chimique, exploser ou
dégager des substances toxiques s’il est manipulé de façon inappropriée. Ne pas jeter au feu, démonter ou chauffer à plus
de 100 °C (212 °F). Ne pas court-circuiter; cela pourrait causer des brûlures. Garder hors de la portée des enfants.
This product contains or uses a lead acid battery. When the battery reaches the end of its useful life, the spent battery should be
disposed of by a qualified recycler or hazardous materials handler. Do not mix this battery with the solid waste stream. Contact
your Intermec Technologies Service Center for recycling or disposal information.
Ce produit contient ou utilise une pile au plomb. Lorsque la batterie atteint la fin de sa durée de vie utile, la batterie usées
doivent être mises aux rebuts par un agent de recyclage ou un manipulateur de matériaux dangereux agréé. Il ne faut pas
mélanger la batterie aux autres déchets solides. Pour plus d’informations sur le recyclage ou la mise aux rebuts, contacter votre
centre de services Intermec Technologies.
Pb
Pb
2
For Users Outside of the United States or Canada
The users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of
accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may
void the compliance of this product and may result in the loss of the users authority to operate the equipment.
Battery Information
Battery Recycling Information
Für Benutzer außerhalb von Kanada oder den Vereinigten Staaten
Die Benutzer dieses Produkts werden darauf hingewiesen, nur Zubehörteile und Peripheriegeräte zu verwenden, die von Intermec
Technologies Corporation genehmigt sind. Falls nicht empfohlene Zubehörteile verwendet oder an diesem Produkt Änderungen
vorgenommen werden, die nicht von Intermec Technologies Corporation genehmigt sind, kann dadurch die behördliche Konformität des
Produkts verletzt werden und der Benutzer die Berechtigung zur Verwendung des Geräts verlieren.
Akku-Informationen
Informationen zum Recycling von Batterien
Caution: This marking indicates that the user should read all included documentation before use.
Caution: The battery pack used in this device may ignite, create a chemical burn hazard, explode, or release toxic
materials if mistreated. Do not incinerate, disassemble, or heat above 100°C (212°F). Do not short circuit; may cause
burns. Keep away from children.
This product contains or uses a lead acid battery. When the battery reaches the end of its useful life, the spent battery should be
disposed of by a qualified recycler or hazardous materials handler. Do not mix this battery with the solid waste stream. Contact
your Intermec Technologies Service Center for recycling or disposal information.
Vorsicht: Diese Kennzeichnung weist darauf hin, dass der Benutzer vor dem Gebrauch alle mitgelieferten Unterlagen
lesen soll.
Vorsicht: Der in diesem Gerät verwendete Akkusatz kann sich bei Missbrauch entzünden, chemische Verätzungen
verursachen, expoldieren oder toxische Substanzen freisetzen. Nicht verbrennen, zerlegen oder über 100 °C (212 °F)
erwärmen. Keinen Kurzschluss verursachen; Verbrennungsgefahr. Von Kindern fern halten.
Dieses Produkt enthält oder verwendet einen Bleisäureakku. Wenn die Batterie ausgedient hat, sollte sie durch einen
qualifizierten Recycler oder durch den Sondermüll entsorgt werden. Werfen Sie die Batterie nicht in den Abfall. Setzen Sie sich
mit Ihrem Intermec Technologies Service-Zentrum in Verbindung, um weitere Informationen zum Recycling oder Entsorgen zu
erhalten.
Pb
Pb
Pb
Pb
3
Para usuarios fuera de Canada o de los Estados Unidos
Os usuários deste produto devem usar acessórios e periféricos aprovados pela Intermec Technologies Corporation. Usar acessórios não
recomendados, ou fazer alterações neste produto não aprovadas pela Intermec Technologies Corporation, poderá anular a conformidade
deste produto e resultar na perda da permissão do usuário de utilizar o equipamento.
Información de la batería
Información acerca del reciclaje de la batería
Precaución: Esta marca indica que el usuario debe leer toda la documentación incluida antes del uso.
Precaución: La batería que se usa en este dispositivo puede encenderse, crear un peligro de quemadura química, explotar o
expedir materiales tóxicos si se trata indebidamente. No la incinere, desarme ni caliente sobre 100°C (212°F). No haga
cortocircuitos porque pueden causar quemaduras. Manténgala alejada de los niños.
Este producto contiene o usa una batería de ácido de plomo. Cuando la batería llega al final de su vida útil, debe ser desechada
por personal especializado en reciclaje de materiales o manejo de materiales peligrosos. No mezcle la batería con otros residuos
sólidos. Pónganse en contacto con su Centro de servicio de Intermec Technologies para obtener información sobre reciclaje o
desecho de materiales.
Pb
Pb
AE8 Power Supply Compliance Insert
*933-065-001*
P/N 933-065-001
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
©
2006 Intermec Technologies
Corporation. All rights reserved.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Intermec AE8 Supplementary Manual

Taper
Supplementary Manual

dans d''autres langues