The device under test is manufactured by the grantee (Sensata Technologies) and sold as an

Aftermarket product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must

ensure the end-user has all applicable / appropriate operating instructions. When end-user

instructions are required, as in the case of this product, the grantee must notify the end-user.

ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must

be included in the manual if the device label is not readily accessible to the end user. The

compliance paragraphs below must be included in the user's manual.

******************************************************************************

FCC ID: 2ATIMHUBA IC: 25094-HUBA

This device complies with Part 15 of the FCC Rules and with Licence exempt RSS standards of

Industry Canada.

Operation is subject to the following two conditions:

separation distance of 20 cm (8 inches) between the equipment and a person’s body.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio

exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compromettre le fonctionnement.

L’exposition à l’énergie radiofréquence. La puissance de sortie rayonné de cet appareil est conforme

aux limites de la FCC/ISDE Canada limites d’exposition aux fréquences radio. Cet appareil doit être

******************************************************************************