Chief OMNDC55 Guide d'installation

Chief
Marque
Chief
Modèle
OMNDC55
Catégorie
Mur
Taper
Guide d'installation

Ce manuel convient également à

I N S T A L L A T I O N I N S T R U C T I O N S
Ceiling Column Mount
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
OMNDC46-55
OMNDC46-55 Installation Instructions
2
DISCLAIMER
Legrand | AV and its affiliated corporations and subsidiaries
(collectively “Legrand | AV”), intend to make this manual
accurate and complete. However, Legrand | AV makes no claim
that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Legrand | AV
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Legrand | AV
assumes no responsibility for accuracy, completeness or
sufficiency of the information contained in this document.
Chief® is a registered trademark of Legrand AV Inc.
DEFINITIONS
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all mounting systems
are properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this mounting system can result in serious personal injury
or damage to equipment! It is the installer’s responsibility to
make sure the structure to which this mounting system is
attached can support five times the combined weight of all
equipment. Reinforce the structure as required before
installing the mounting system.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to the mounting system does not
exceed 80 lbs (36.3 kg) for the OMNDC46 or 100 lbs (45.3
kg) for the OMNDC55.
WARNING: The OMNDC46/55 mounts were designed to
be mounted to the UL-listed Chief® CPA395 ceiling mount.
Do NOT attempt to mount to any other ceiling mount!
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this mounting system outdoors.
--SAVE THESE INSTRUCTIONS--
Installation Instructions OMNDC46-55
3
DIMENSIONS
OMNDC55
871
34.3
2183.71
86.0
928
36.5
WITH OMNDC55
1.9
69.85
2.8
OMNDC46
35.8
909.9
80.0
2031.4
2.75
69.9
1.90
48.3
25.0
634.6
CABLE
ACCESS
46" SAMSUNG OMN
DISPLAY SHOWN
NOT INCLUDED
OMNDC46-55 Installation Instructions
4
LEGEND
Tighten Fastener
Apretar elemento de fijación
Befestigungsteil festziehen
Apertar fixador
Serrare il fissaggio
Bevestiging vastdraaien
Serrez les fixations
Loosen Fastener
Aflojar elemento de fijación
Befestigungsteil lösen
Desapertar fixador
Allentare il fissaggio
Bevestiging losdraaien
Desserrez les fixations
Phillips Screwdriver
Destornillador Phillips
Kreuzschlitzschraubendreher
Chave de fendas Phillips
Cacciavite a stella
Kruiskopschroevendraaier
Tournevis à pointe cruciforme
Open-Ended Wrench
Llave de boca
Gabelschlüssel
Chave de bocas
Chiave a punte aperte
Steeksleutel
Clé à fourche
By Hand
A mano
Von Hand
Com a mão
A mano
Met de hand
À la main
Hex-Head Wrench
Llave de cabeza hexagonal
Sechskantschlüssel
Chave de cabeça sextavada
Chiave esagonale
Zeskantsleutel
Clé à tête hexagonale
Pencil Mark
Marcar con lápiz
Stiftmarkierung
Marcar com lápis
Segno a matita
Potloodmerkteken
Marquage au crayon
Drill Hole
Perforar
Bohrloch
Fazer furo
Praticare un foro
Gat boren
Percez un trou
Adjust
Ajustar
Einstellen
Ajustar
Regolare
Afstellen
Ajuster
Remove
Quitar
Entfernen
Remover
Rimuovere
Verwijderen
Retirez
Optional
Opcional
Optional
Opcional
Opzionale
Optie
En option
Security Wrench
Llave de seguridad
Sicherheitsschlüssel
Chave de segurança
Chiave di sicurezza
Veiligheidssleutel
Clé de sécurité
Installation Instructions OMNDC46-55
5
TOOLS REQUIRED FOR INSTALLATION
PARTS
1/2" (12.7mm)
3/16"
A (2)
[Ceiling post]
B (4)
[Bolt hole cap]
C (2)
[Pipe cap]
D (4)
M8x20mm
E (1)
3/16"
OMNDC46-55 Installation Instructions
6
Assembly And Installation
1. Loosely attach two CPA395 ceiling plates (not included) to
ceiling, following CPA395 installation instructions. Plates
must be installed 25" apart for the OMNDC46 or 29.2" for
the OMNDC55. Only install screws 3/4 of the way to allow
for some adjustment after the display has been installed to
columns. (See Figure 1)
2. Use CPA395 hardware (not included) to attach ceiling posts
(A) to CPA395 plates. (See Figure 1)
Figure 1
3. Install two M8x20mm button head cap screws (D) loosely
into two top holes on side of display. (See Figure 2)
Figure 2
4. Use installed screws (D) to hang display onto ceiling posts
(A). (See Figure 3)
5. Tighten screws partially installed in Step 3.
6. Use two M8x20mm button head cap screws (D) to secure
bottom of display to ceiling posts (A). (See Figure 3)
Figure 3
7. Tighten CPA395 ceiling plates to ceiling following CPA395
installation instructions.
8. Route cables as desired. See Cable Management Section
for details.
9. Install top cover onto display. (See Figure 4)
10. Snap two pipe caps (C) into side covers. (See Figure 4)
11. Snap four bolt hole caps (B) into holes on side covers. (See
Figure 4)
Figure 4
CPA395 hardware
(not included)
2
2
(A) x 2
(D) x 2
3
4
(D) x 2
6
5
x 2
(C) x 2
(B) x 4
10
11
9
9
Installation Instructions OMNDC46-55
7
Cable Management
1. Route cables through ceiling posts (A) as desired. (See
Figure 5)
Figure 5
1
1
1
1
OMNDC46-55 Installation Instructions
USA/International A 6436 City West Parkway, Eden Prairie, MN 55344
P800.582.6480 / 952.225.6000
F877.894.6918 / 952.894.6918
Europe A Franklinstraat 14, 6003 DK Weert, Netherlands
P+31 (0) 495 580 852
F+31 (0) 495 580 845
Asia Pacific A Office No. 918 on 9/F, Shatin Galleria
18-24 Shan Mei Street
Fotan, Shatin, Hong Kong
P852 2145 4099
F852 2145 4477
8800-003157 Rev00
2019 Legrand | AV
www.legrandav.com
08/19
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Chief OMNDC55 Guide d'installation

Chief
Marque
Chief
Modèle
OMNDC55
Catégorie
Mur
Taper
Guide d'installation
Ce manuel convient également à
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes