Legrand V2444-2LS Guide d'installation

Taper
Guide d'installation
1
3 4
2
V2444-2LS
2-Gang Device Box
INSTALLATION INSTRUCTIONS
Wiremold Electrical Systems conform to and should be installed
and properly grounded in compliance with requirements of the
current National Electrical Code, Canadian Electrical Code or
codes administered by local authorities.
All electrical products may represent possible shock or fire
hazard if improperly installed or used. Wiremold electrical
products are cUL Listed, made for interior use only, and should
be installed in conformance with current local and/or the National
Electrical Code.
Use #8 (5/16" [7.9mm] head size) flat head fastener or equivalent to mount base to surface.
Utiliser une attache à tête plate de calibre 8 (tête de [7.9mm] 5/16" po.) ou une fixation équivalent pour assujettir
le tube guide-fils et les raccords à la surface de montage.
Use un sujetador de cabeza plana No. 8 (tamaño de cabeza: [7.9mm] 5/16" de pulgada) o su equivalente para
unir la canalita y los accesorios a la superficie de montaje.
The Wiremold Company
U.S. and International:
60 Woodlawn Street • West Hartford, CT 06110
1-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6251
Canada:
850 Gartshore Street • Fergus, Ontario N1M 2W8
1-800-741-7957 • FAX 519-843-5980
42196 - September 2001 - For latest specs visit www.wiremold.com
© Copyright 2001 The Wiremold Company All Rights Reserved
  • Page 1 1

Legrand V2444-2LS Guide d'installation

Taper
Guide d'installation

dans d''autres langues