Crestron CENI-AVF-HUB Mode d'emploi

Marque: Crestron

Modèle: CENI-AVF-HUB

Taper: Mode d'emploi

Ce manuel convient également à

CEN-AVF-HUB

DO GUIDE

CEN(I)-AVF-HUB

.AV Framework™ Hub

The CEN-AVF-HUB and CENI-AVF-HUB are functionally identical. For simplicity within this guide,

the term “CEN-AVF-HUB” is used.

DO Install the Device

The Crestron

CEN-AVF-HUB can be mounted onto a DIN rail, mounted to any at surface, or placed

on a tabletop. If necessary, use screws that are applicable for the mounting method. See  and  for

installation options.

NOTE: The CEN-AVF-HUB can also be rack mounted. For rack mount installation, refer to the

RMK-IFE-1U Installation Guide (Doc. 7627) at www.crestron.com/manuals.

NOTE: Do not use the supplied screws to mount the bracket to the bottom of the CEN-AVF-HUB

if the device will be mounted on a DIN rail. Removing the CEN-AVF-HUB from the DIN rail is not

possible.

DO Connect the Device

On the CEN-AVF-HUB, connect the Power over Ethernet (PoE) port to a PoE injector or a LAN

connection that supplies Power over Ethernet. If desired, connect a power supply (sold separately) to

the CEN-AVF-HUB and then to an electrical outlet. See  and  for connection ports.

 Wire with PoE

 Wire with Optional Power Supply

DO Congure the Device

Once all connections have been made, the

CEN-AVF-HUB is congured with the built-in, web-based setup tool.

1. Use a web browser to navigate to http://hostname where hostname is the host name or IP

address of the CEN-AVF-HUB. The host name for the CEN-AVF-HUB is CEN-AV- plus the last

eight characters of the MAC address. The MAC address can be found on the label located on

the bottom of the CEN-AVF-HUB. For example, the host name of a CEN-AVF-HUB with the MAC

address 00107F2ED7CB is CEN-AV-7F2ED7CB. Once the device is connected, the CONFIGURE

HUB screen is displayed.

2. Enter the IP address or host name of the cloud-based or local Crestron Fusion

server. If this

eld is left blank, the Crestron Fusion server must be pointed to the CEN-AVF-HUB to retrieve its

conguration (RVI) le.

Click to view or change the device’s Ethernet settings, congure the automatic update

feature, or view information about the CEN-AVF-HUB.

NOTE: Changing the IP address or host name causes the CEN-AVF-HUB to reboot.

3. Click NEXT. The DEFINE ROOMS screen is displayed.

4. Use the DEFINE ROOMS screen to add a room, change an existing room’s conguration, or

delete a room. Visit https://vimeo.com/161188849 for a video demonstrating how rooms are

added, changed, and deleted.

• Add a Room

a. Click ADD ROOM.

b. Enter a name for the room in the ROOM NAME eld.

c. Enter the IP address or host name of the HD-MD-400-C-E installed in the room in the

HD-MD-400-C-E IP/HOSTNAME eld.

d. Enter the names to be used for the receiver and transmitter inputs in the NAME eld.

The CEN-AVF-HUB currently supports the AM-100 AirMedia

Presentation Gateway, the

HD-MD400-C-E HD Scaling Presentation Switcher & Extender 400, and any CEC or

RS-232 controlled display device.

If an input name represents a connection to an AM-100, check the box next to the input

name.

NOTE: Only one input can be associated with an AM-100.

e. Use the mouse to select CEC Control or RS-232 Control. If RS-232 control is selected,

enter the Power On command and the Power Off command in the respective elds, and

click RS-232 Conguration to congure RS-232 communications.

f. Click SAVE to save the room settings and return to the DEFINE ROOMS screen, or click

CANCEL to cancel.

DO Check the Box

QUANTITY PRODUCT COLOR PART NUMBER

1 Bracket, Mounting, Integrated DIN Rail Clip Black 4519035

2 Screw, 6-32 x 3/8", Pan Head, Phillips Black 2007225

1 Connector, 4-Pin 2003576

1 Cable, Ethernet, CAT5e, 5' (1.52 m) Black 2022311

 Flat Surface Mounting

LAN PoE

LAN

Power

Supply

 Din Rail Mounting

DO GUIDE

DOC. 7838B (2045254) 07.16

Specications subject to change without notice.

• Congure a Room

a. Click a room name and click CONFIGURE ROOM.

b. Make any required changes to the room’s settings.

c. Click SAVE to save the changes or click CANCEL to cancel.

• Delete a Room

a. Click the room and click DELETE ROOM. A screen is displayed conrming the room

deletion.

b. Click Delete to delete the room or click Cancel to cancel.

5. Click DEVICE LIST to view the list of devices attached to the CEN-AVF-HUB.

DO Upload the Conguration

If a Crestron Fusion server is specied on the CONFIGURE HUB screen, Crestron Fusion software

automatically receives the CEN-AVF-HUB’s conguration le from the CEN-AVF-HUB. If a server is

not specied, Crestron Fusion software must be used to retrieve the conguration le from the

CEN-AVF-HUB.

As of the date of manufacture, the product has been tested and found to comply with specications for CE marking.

Regulatory Compliance

This product is Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc.

Conformité Reglementaire

Ce produit est homologué selon les normes et les exigences UL applicables par Underwriters Laboratories Inc.

This unit is for in-house use only, not for outside of building.

Cet appareil est destiné pour utilisation dans la maison seulement, pas pour l’extérieur du bâtiment.

Federal Communications Commission (FCC) Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Industry Canada (IC) Compliance Statement

CAN ICES-3(B)/NMB-3(B)

WARNING: DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD

This product contains a coin cell/battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.

If you think batteries have been swallowed or placed inside any part of the body, seek immediate medical attention.

Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a limited non-exclusive, non-transferable Software Development Tools License Agreement. Crestron product operating system software is licensed to Crestron dealers, CSPs, and

end-users under a separate End-User License Agreement. Both of these Agreements can be found on the Crestron website at www.crestron.com/legal/software_license_agreement.

The specic patents that cover Crestron products are listed at http://www.crestron.com/legal/patents. The product warranty can be found at www.crestron.com/warranty.

Certain Crestron products contain open source software. For specic information, please visit www.crestron.com/opensource.

Crestron, the Crestron logo, .AV Framework, AirMedia, and Crestron Fusion are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer

to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography.