AEG FFB64606PM Manuel utilisateur

USER

MANUAL

EN User Manual 2

Dishwasher

FR Notice d'utilisation 25

Lave-vaisselle

FFB64606PM

CONTENTS

1. SAFETY INFORMATION.............................................................................................2

2. SAFETY INSTRUCTIONS.............................................................................................4

3. PRODUCT DESCRIPTION...........................................................................................6

4. CONTROL PANEL....................................................................................................... 7

5. PROGRAMMES............................................................................................................8

6. SETTINGS...................................................................................................................10

7. OPTIONS....................................................................................................................13

8. BEFORE FIRST USE................................................................................................... 14

9. DAILY USE..................................................................................................................15

10. HINTS AND TIPS..................................................................................................... 16

11. CARE AND CLEANING.......................................................................................... 17

12. TROUBLESHOOTING.............................................................................................20

13. PRODUCT INFORMATION SHEET .......................................................................23

14. ADDITIONAL TECHNICAL INFORMATION.........................................................24

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you

impeccable performance for many years, with innovative technologies that help

make life simpler features you might not find on ordinary appliances. Please

spend a few minutes reading to get the very best from it.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.aeg.com/webselfservice

Register your product for better service:

www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the

following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

1.

SAFETY INFORMATION

Before the installation and use of the appliance,

carefully read the supplied instructions. The

www.aeg.com

2

manufacturer is not responsible for any injuries or

damages that are the result of incorrect installation or

usage. Always keep the instructions in a safe and

accessible location for future reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning the use of the appliance in a

safe way and understand the hazards involved.

• Children between 3 and 8 years of age and persons

with very extensive and complex disabilities shall be

kept away unless continuously supervised.

• Children of less than 3 years of age should be kept

away unless continuously supervised.

• Do not let children play with the appliance.

• Keep detergents away from children.

• Keep children and pets away from the appliance when

the door is open.

• Children shall not carry out cleaning and user

maintenance of the appliance without supervision.

1.2

General Safety

• This appliance is intended to be used in household

and similar applications such as:

– farm houses; staff kitchen areas in shops, offices

and other working environments;

– by clients in hotels, motels, bed & breakfast and

other residential type environments.

• Do not change the specification of this appliance.

• The operating water pressure (minimum and

maximum) must be between 0.5 (0.05) / 8 (0.8) bar

(MPa)

• Obey the maximum number of 13 place settings.

ENGLISH

3

• If the supply cord is damaged, it must be replaced by

the manufacturer, its Authorised Service Centre or

similarly qualified persons in order to avoid a hazard.

• Put the cutlery in the cutlery basket with the sharp

ends pointing down or put them in the cutlery drawer

in a horizontal position with the sharp edges down.

• Do not leave the appliance with the open door

unattended to avoid stepping accidentally onto it.

• Before any maintenance operation, deactivate the

appliance and disconnect the mains plug from the

socket.

• Do not use high pressure water sprays and/or steam

to clean the appliance.

• If the appliance has ventilation openings in the base,

they must not be covered e.g. by a carpet.

• The appliance is to be connected to the water mains

using the new supplied hose-sets. Old hose sets must

not be reused.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Follow the installation instructions

supplied with the appliance.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Do not install or use the appliance

where the temperature is less than 0

°C.

• Install the appliance in a safe and

suitable place that meets installation

requirements.

2.2 Electrical connection

WARNING!

Risk of fire and electric

shock.

• The appliance must be earthed.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Always use a correctly installed

shockproof socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the mains plug and to the mains

cable. Should the mains cable need

to be replaced, this must be carried

out by our Authorised Service Centre.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

www.aeg.com

4

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• This appliance complies with the

E.E.C. Directives.

• UK and Ireland only. This appliance is

fitted with a 13 A mains plug. If it is

necessary to change the mains plug

fuse, use only a 13 A ASTA (BS 1362)

fuse.

2.3 Water connection

• Do not cause damage to the water

hoses.

• Before connection to new pipes,

pipes not used for a long time, where

repair work has been carried out or

new devices fitted (water meters,

etc.), let the water flow until it is clean

and clear.

• Ensure that there are no visible water

leaks during and after the first use of

the appliance.

• The water inlet hose has a safety valve

and a sheath with an inner mains

cable.

WARNING!

Dangerous voltage.

• If the water inlet hose is damaged,

immediately close the water tap and

disconnect the mains plug from the

mains socket. Contact the Authorised

Service Centre to replace the water

inlet hose.

2.4 Use

• Do not sit or stand on the open door.

• Dishwasher detergents are

dangerous. Obey the safety

instructions on the detergent

packaging.

• Do not drink and play with the water

in the appliance.

• Do not remove the dishes from the

appliance until the programme is

complete. Some detergent may

remain on the dishes.

• The appliance can release hot steam

if you open the door while a

programme operates.

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

2.5 Service

• To repair the appliance contact an

Authorised Service Centre.

• Use original spare parts only.

2.6 Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent

children and pets to get closed in the

appliance.

ENGLISH

5

3. PRODUCT DESCRIPTION

13

6

5

9

10

7

3

4

21

11

812

1

Worktop

2

Top spray arm

3

Upper spray arm

4

Lower spray arm

5

Filters

6

Rating plate

7

Salt container

8

Air vent

9

Rinse aid dispenser

10

Detergent dispenser

11

Cutlery basket

12

Lower basket

13

Upper basket

www.aeg.com6

4. CONTROL PANEL

1

2 4 5

68

3

7

1

On/off button

2

Program button

3

Programme indicators

4

Display

5

Delay button

6

Option button

7

Indicators

8

Start button

4.1 Indicators

Indicator Description

Salt indicator. It is on when the salt container needs refilling. It is always off

while the programme operates.

Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. It

is always off while the programme operates.

Washing phase. It is on when the washing phase operates.

Rinsing phase. It is on when the rinsing phase operates.

Drying phase. It is on when the drying phase operates.

End indicator. It is on when the programme is completed.

Delay indicator.

TimeSaver indicator.

XtraDry indicator.

ENGLISH 7

Indicator Description

SprayZone indicator.

5. PROGRAMMES

The order of the programmes in the

table may not reflect their sequence on

the control panel.

Programme Degree of soil

Type of load

Programme phases Options

1)

• Normal soil

• Crockery and cut-

lery

• Prewash

• Wash 50 °C

• Rinses

• Dry

• XtraDry

• SprayZone

2)

• All

• Crockery, cutlery,

pots and pans

• Prewash

• Wash from 45 °C

to 70 °C

• Rinses

• Dry

• XtraDry

• SprayZone

3)

• Mixed soil

• Crockery, cutlery,

pots and pans

• Prewash

• Wash 50 °C and

65 °C

• Rinses

• Dry

• TimeSaver

• XtraDry

• SprayZone

4)

• Heavy soil

• Crockery, cutlery,

pots and pans

• Prewash

• Wash 70 °C

• Rinses

• Dry

• TimeSaver

• XtraDry

• SprayZone

5)

• Normal soil

• Crockery and cut-

lery

• Wash 60 °C

• Rinses

• Dry

• XtraDry

• SprayZone

6)

• Light soil

• Crockery and cut-

lery

• Wash 60 °C

• Rinses

• XtraDry

7)

• Normal or light

soil

• Delicate crockery

and glassware

• Wash 45 °C

• Rinses

• Dry

• XtraDry

8)

• Normal soil

• Crockery and cut-

lery

• Prewash

• Wash 50 °C

• Rinses

• Dry

• XtraDry

www.aeg.com8

Programme Degree of soil

Type of load

Programme phases Options

9)

• No load • Self-cleaning

1)

This programme offers the most efficient use of water and energy consumption for crockery and cut-

lery with normal soil. This is the standard programme for test institutes.

2)

The appliance senses the degree of soil and the quantity of items in the baskets. It automatically ad-

justs the temperature and quantity of water, energy consumption and programme duration.

3)

This programme is suitable for washing a load with mixed soil. Place items with heavy soil in the lower

basket and with normal soil in the upper basket. The pressure and temperature of the water in the lower

basket are higher than in the upper basket.

4)

This programme is designed to wash heavily soiled items with high water pressure and at a high tem-

perature.

5)

This programme is suitable for washing a load with normal soil.

6)

This programme is suitable for washing a load or a half load with fresh or light soil in a short time.

7)

This programme controls the temperature of the water to provide special care for delicate items,

glassware in particular.

8)

This is the most silent programme. The pump works at a very low speed to reduce the noise gener-

ated by the appliance. Due to the low speed, the programme duration is long.

9)

This programme is designed to clean the inside of the appliance effectively and efficiently. It removes

limescale and grease buildup. The programme should be run at least once every 2 months with a desca-

ler or a cleaning product designed for dishwashers and without any load.

5.1 Consumption values

Programme

1)

Water

(l)

Energy

(kWh)

Duration

(min)

10.5 0.832 240

8 - 15 0.7 - 1.7 46 - 170

14 - 16 1.2 - 1.5 160 - 180

12.5 - 14.5 1.4 - 1.7 170 - 190

12.9 1.14 89

10 0.9 30

12 - 14 0.8 - 1.0 82 - 92

12 - 13 1.1 - 1.3 230 - 250

10 0.86 60 - 70

1)

The pressure and the temperature of the water, the variations of the mains supply, the options and the

quantity of dishes can change the values.

ENGLISH 9

5.2 Information for test

institutes

To receive the necessary information for

conducting performance tests (e.g.

according to EN60436), send an email to:

[email protected]

In your request please include the

product number code (PNC) found on

the rating plate.

For any other questions regarding your

dishwasher please refer to the service

book provided with your appliance.

6. SETTINGS

6.1 Programme selection

mode and user mode

When the appliance is in programme

selection mode it is possible to set a

programme and to enter user mode.

Settings available in the user mode:

• The level of water softener according

to the water hardness.

• Activation or deactivation of the rinse

aid empty notification.

• The level of rinse aid according to the

required dosage.

• Activation or deactivation of the

AirDry.

As the appliance stores the saved

settings, there is no need to configure

it before every cycle.

How to set the programme

selection mode

The appliance is in programme selection

mode when the programme indicator

is on and the display shows the

programme duration.

After activation, the appliance is in

programme selection mode by default. If

not, set the programme selection mode

the following way:

Press and hold simultaneously Delay and

Option until the appliance is in

programme selection mode.

How to enter user mode

Make sure the appliance is in

programme selection mode.

To enter user mode, press and hold

simultaneously Delay and Option until

the indicators , , and

flash and the display is blank.

6.2 The water softener

The water softener removes minerals

from the water supply, which would have

a negative effect on the washing results

and on the appliance.

The higher the content of these minerals,

the harder your water is. Water hardness

is measured in equivalent scales.

The water softener should be adjusted

according to the hardness of the water in

your area. Your local water authority can

advise you on the hardness of the water

in your area. It is important to set the

right level of the water softener to assure

good washing results.

Water hardness

German de-

grees (°dH)

French degrees

(°fH)

mmol/l Clarke de-

grees

Water softener lev-

el

47 - 50 84 - 90 8.4 - 9.0 58 - 63 10

43 - 46 76 - 83 7.6 - 8.3 53 - 57 9

37 - 42 65 - 75 6.5 - 7.5 46 - 52 8

29 - 36 51 - 64 5.1 - 6.4 36 - 45 7

www.aeg.com10

German de-

grees (°dH)

French degrees

(°fH)

mmol/l Clarke de-

grees

Water softener lev-

el

23 - 28 40 - 50 4.0 - 5.0 28 - 35 6

19 - 22 33 - 39 3.3 - 3.9 23 - 27

5

1)

15 - 18 26 - 32 2.6 - 3.2 18 - 22 4

11 - 14 19 - 25 1.9 - 2.5 13 - 17 3

4 - 10 7 - 18 0.7 - 1.8 5 - 12 2

<4 <7 <0.7 < 5

1

2)

1)

Factory setting.

2)

Do not use salt at this level.

Regardless of the type of detergent

used, set the proper water hardness

level to keep the salt refill indicator

active.

Multi-tabs containing salt

are not effective enough to

soften hard water.

How to set the water softener

level

Make sure the appliance is in user mode.

1. Press Program.

• The indicators

, and

are off.

• The indicator

still flashes.

• The display shows the current

setting: e.g. = level 5.

2. Press Program repeatedly to change

the setting.

3. Press on/off to confirm the setting.

6.3 The rinse aid empty

notification

The rinse aid helps to dry the dishes

without streaks and stains. It is

automatically released during the hot

rinse phase.

When the rinse aid chamber is empty,

the rinse aid indicator is turned on

notifying to refill rinse aid. If the drying

results are satisfactory while using multi-

tablets only, it is possible to deactivate

the notification for refilling rinse aid.

However, for best drying performance,

always use rinse aid.

If standard detergent or multi-tablets

without rinse aid are used, activate the

notification to keep the rinse aid refill

indicator active.

How to deactivate the rinse

aid empty notification

Make sure the appliance is in user mode.

1. Press Start.

• The indicators , and

are off.

• The indicator

still

flashes.

• The display shows the current

setting.

–

= the rinse aid empty

notification is deactivated.

–

= the rinse aid empty

notification is activated.

2. Press Start to change the setting.

3. Press on/off to confirm the setting.

6.4 The rinse aid level

It is possible to set the released quantity

of rinse aid between level 1 (minimum

quantity) and level 6 (maximum quantity).

Level 0 deactivates the rinse aid

dispenser and no rinse aid is released.

Factory setting: level 4.

ENGLISH

11

How to set the rinse aid level

Make sure the appliance is in user mode.

1. Press Delay.

• The indicators ,

and are off.

• The indicator still flashes.

• The display shows the current

setting: e.g. = level 4.

– The levels of rinse aid range

from 0A to 6A where level 0A

means no rinse aid is used.

2. Press Delay repeatedly to change

the setting.

3. Press on/off to confirm the setting.

6.5 AirDry

AirDry improves the drying results with

less energy consumption.

During the drying phase, the

door opens automatically

and remains ajar.

CAUTION!

Do not try to close the

appliance door within 2

minutes after automatic

opening. This can cause

damage to the appliance.

If, afterwards, the door is

closed for another 3

minutes, the running

programme ends.

AirDry is automatically activated with all

programmes excluding (if

applicable).

To improve the drying performance refer

to the XtraDry option or activate AirDry.

CAUTION!

If children have access to the

appliance, it is advised to

deactivate AirDry as opening

the door may pose a danger.

How to deactivate AirDry

Make sure the appliance is in user mode.

1. Press Option.

• The indicators ,

and are off.

• The indicator

still

flashes.

• The display shows the current

setting.

–

= AirDry is deactivated.

–

= AirDry is activated.

2. Press Option to change the setting.

3. Press on/off to confirm the setting.

www.aeg.com

12

7. OPTIONS

Desired options must be

activated every time before

you start a programme.

It is not possible to activate

or deactivate options while a

programme is running.

The Option button toggles

between the available

options and their possible

combinations.

Not all options are

compatible with each other.

If you select non compatible

options, the appliance

automatically deactivates

one or more of them. Only

the indicators of the still

active options are on.

If an option is not applicable

to a programme, the related

indicator is off or it flashes

quickly for a few seconds

and then goes out.

Activating options can affect

the water and energy

consumption as well as the

programme duration.

7.1 SprayZone

The SprayZone option provides the best

washing results for heavily soiled items.

The option operates within the

designated area in the lower basket and

ensures the highest water pressure and

temperature.

CAUTION!

Make sure that items placed

in the SprayZone do not

block the upper spray arm.

How to activate SprayZone

Press Option until the indicator is on.

The display shows the updated

programme duration.

7.2 XtraDry

Activate this option to boost the drying

performance.

XtraDry is a permanent option for all

programmes other than

. It is

automatically activated in next cycles.

This configuration can be changed at any

time.

Every time is

activated, XtraDry is off and

needs to be chosen

manually.

Activating XtraDry deactivates TimeSaver

and vice versa.

How to activate XtraDry

Press Option until the indicator is on.

The display shows the updated

programme duration.

7.3 TimeSaver

The TimeSaver allows to reduce the

duration of a selected programme by

approximately 50%.

The washing results are the same as with

the normal programme duration. The

drying results can decrease.

This option increases the pressure and

the temperature of the water. The

washing and the drying phases are

shorter.

By default, TimeSaver is off, but it is

possible to activate it manually. This

option cannot be combined with

XtraDry.

How to activate TimeSaver

Press Option until the indicator is on.

The display shows the updated

programme duration.

ENGLISH

13

8. BEFORE FIRST USE

1. Make sure that the current level of

the water softener agrees with the

hardness of the water supply. If

not, adjust the level of the water

softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any

processing residuals that can still be

inside the appliance. Do not use

detergent and do not load the

baskets.

After starting a programme, it may take

up to 5 minutes for the appliance to

recharge the resin in the water softener.

It seems that the appliance is not

working. The washing phase starts only

after this procedure is completed. The

procedure is repeated periodically.

8.1 The salt container

CAUTION!

Use rough salt designed for

dishwashers only. Fine salt

increases the risk of

corrosion.

The salt is used to recharge the resin in

the water softener and to assure good

washing results in daily use.

How to fill the salt container

1. Turn the cap of the salt container

counterclockwise and remove it.

2. Put 1 litre of water in the salt

container (only for the first time).

3. Fill the salt container with dishwasher

salt (until it is full).

4. Carefully shake the funnel by its

handle to get the last granules

inside.

5. Remove the salt around the opening

of the salt container.

6. Turn the cap of the salt container

clockwise to close the salt container.

CAUTION!

Water and salt can come out

of the salt container when

you fill it. After you fill the

salt container, immediately

start the shortest

programme to prevent

corrosion. Do not put dishes

in the baskets.

8.2 How to fill the rinse aid

dispenser

A

B

C

CAUTION!

Only use rinse aid designed

specifically for dishwashers.

1. Open the lid (C).

www.aeg.com

14

2. Fill the dispenser (B) until the rinse

aid reaches the marking ''MAX''.

3. Remove the spilled rinse aid with an

absorbent cloth to prevent excessive

foam formation.

4. Close the lid. Make sure that the lid

locks into position.

Fill the rinse aid dispenser

when the indicator (A) is

clear.

9. DAILY USE

1. Open the water tap.

2. Press the on/off button to activate

the appliance.

Make sure that the appliance is in

programme selection mode.

• If the salt indicator is on, fill the

salt container.

• If the rinse aid indicator is on, fill

the rinse aid dispenser.

3. Load the baskets.

4. Add the detergent.

5. Set and start a programme suitable

for the type of load and the degree

of soil.

9.1 Using the detergent

A

B

C

CAUTION!

Only use detergent

specifically designed for

dishwashers.

1. Press the release button (A) to open

the lid (C).

2. Put the detergent, in powder or

tablets, in the compartment (B).

3. If the programme has a prewash

phase, put a small quantity of

detergent on the inner part of the

appliance door.

4. Close the lid. Make sure that the lid

locks into position.

9.2 Setting and starting a

programme

Starting a programme

1. Press the on/off button to activate

the appliance. Make sure that the

appliance is in programme selection

mode and the door is closed.

2. Press Program again and again until

the indicator of the desired

programme is on.

The display shows the programme

duration.

3. Set the applicable options.

4. Press Start to start the programme.

• The indicator of the running

phase is on.

• The programme duration starts to

decrease with steps of 1 minute.

Starting a programme with

delay start

1. Set a programme.

2. Press Delay repeatedly until the

display shows the desired delay time

(from 1 to 24 hours).

3. Press Start to begin the countdown.

• The indicator

is on.

• The remaining time counts down

in hours. The final hour is

displayed in minutes.

When the countdown is completed, the

programme starts and the indicator of

the running phase is on. The indicator

is off.

Opening the door while the

appliance operates

Opening the door while a programme is

running stops the appliance. It may affect

ENGLISH

15

the energy consumption and the

programme duration. After closing the

door, the appliance continues from the

point of interruption.

If the door is opened for

more than 30 seconds

during the drying phase, the

running programme ends. It

does not happen if the door

is opened by AirDry

function.

Cancelling the delay start while

the countdown operates

When you cancel the delay start, you

have to set a programme and options

again.

Press and hold simultaneously Delay and

Option until the appliance is in

programme selection mode.

Cancelling a programme

Press and hold simultaneously Delay and

Option until the appliance is in

programme selection mode.

Make sure that there is detergent in the

detergent dispenser before you start a

new programme.

End of the programme

When the programme is complete, the

display shows 0:00. The indicator is

on.

All buttons are inactive except for the

on/off button.

1. Press the on/off button or wait for

the Auto Off function to

automatically deactivate the

appliance.

If you open the door before the

activation of Auto Off, the appliance

is automatically deactivated.

2. Close the water tap.

The Auto Off function

This function decreases energy

consumption by deactivating

automatically the appliance when it is not

operating.

The function comes into operation:

• 5 minutes after the completion of the

programme.

• After 5 minutes if the programme has

not started.

10. HINTS AND TIPS

10.1 General

Follow the hints below to ensure optimal

cleaning and drying results in daily use

and to help you protect the environment.

• Remove larger residues of food from

the dishes into the waste bin.

• Do not pre-rinse dishes by hand.

When needed, select a programme

with a prewash phase.

• Always use the whole space of the

baskets.

• Make sure that items in the baskets

do not touch or cover each other.

Only then can the water completely

reach and wash the dishes.

• You can use dishwasher detergent,

rinse aid and salt separately or you

can use the multi-tablets (e.g. ''All in

1''). Follow the instructions on the

packaging.

• Select a programme according to the

type of load and the degree of soil.

offers the most efficient use

of water and energy consumption.

10.2 Using salt, rinse aid and

detergent

• Only use salt, rinse aid and detergent

designed for dishwasher. Other

products can cause damage to the

appliance.

• In areas with hard and very hard

water, we recommend to use basic

dishwasher detergent (powder, gel,

tablets containing no additional

agents), rinse aid and salt separately

for optimal cleaning and drying

results.

• Detergent tablets do not fully dissolve

with short programmes. To prevent

www.aeg.com

16

detergent residues on the tableware,

we recommend that you use tablets

with long programmes.

• Do not use more than the correct

quantity of detergent. Refer to the

instructions on the detergent

packaging.

10.3 What to do if you want to

stop using multi-tablets

Before you start to use separately

detergent, salt and rinse aid, complete

the following steps:

1. Set the highest level of the water

softener.

2. Make sure that the salt and rinse aid

containers are full.

3. Start the shortest programme with a

rinsing phase. Do not add detergent

and do not load the baskets.

4. When the programme is completed,

adjust the water softener according

to the water hardness in your area.

5. Adjust the released quantity of rinse

aid.

6. Activate the rinse aid empty

notification.

10.4 Loading the baskets

• Use the appliance to wash

dishwasher-safe items only.

• Do not wash in the appliance items

made of wood, horn, aluminium,

pewter and copper.

• Do not wash in the appliance items

that can absorb water (sponges,

household cloths).

• Remove large food residues from

dishes.

• Soak cookware with burnt-on food

before washing it in the appliance.

• Put hollow items (cups, glasses and

pans) with the opening facing

downwards.

• Make sure that glasses do not touch

each other.

• Put light items in the upper basket.

Make sure that the items do not move

freely.

• Put cutlery and small items in the

cutlery basket.

• Make sure that the spray arms can

move freely before you start a

programme.

10.5 Before starting a

programme

Before you start the selected

programme, make sure that:

• The filters are clean and correctly

installed.

• The cap of the salt container is tight.

• The spray arms are not clogged.

• There is enough salt and rinse aid

(unless you use multi-tablets).

• The arrangement of the items in the

baskets is correct.

• The programme is suitable to the

type of load and the degree of soil.

• The correct quantity of detergent is

used.

10.6 Unloading the baskets

1. Let the tableware cool down before

you remove it from the appliance.

Hot items can be easily damaged.

2. First remove items from the lower

basket, then from the upper basket.

After the programme is

completed, water can still

remain on the inside

surfaces of the appliance.

11. CARE AND CLEANING

WARNING!

Before maintenance,

deactivate the appliance and

disconnect the mains plug

from the main socket.

Dirty filters and clogged

spray arms decrease the

washing results. Make a

check regularly and, if

necessary, clean them.

ENGLISH 17

11.1 Cleaning the filters

The filter system is made of 3 parts.

C

B

A

1. Turn the filter (B) counterclockwise

and remove it.

2. Remove the filter (C) out of filter (B).

3. Remove the flat filter (A).

4. Wash the filters.

5. Make sure that there are no residues

of food or soil in or around the edge

of the sump.

6. Put back in place the flat filter (A).

Make sure that it is correctly

positioned under the 2 guides.

7. Reassemble the filters (B) and (C).

8. Put back the filter (B) in the flat filter

(A). Turn it clockwise until it locks.

CAUTION!

An incorrect position of the

filters can cause bad

washing results and damage

to the appliance.

www.aeg.com18

11.2 Cleaning the upper spray

arm

We recommend to clean the upper spray

arm regularly to prevent soil from

clogging the holes.

Clogged holes can cause unsatisfactory

washing results.

1. Pull out the upper basket.

2. To detach the spray arm from the

basket, press the spray arm upwards

and simultaneously turn it clockwise.

3. Wash the spray arm under running

water. Use a thin pointed tool, e.g. a

toothpick, to remove particles of soil

from the holes.

4. To install the spray arm back, press

the spray arm upwards and

simultaneously turn it

counterclockwise until it locks into

place.

11.3 External cleaning

• Clean the appliance with a moist soft

cloth.

• Only use neutral detergents.

• Do not use abrasive products,

abrasive cleaning pads or solvents.

11.4 Internal cleaning

• Carefully clean the appliance,

including the rubber gasket of the

door, with a soft damp cloth.

• To maintain the performance of your

appliance, use a cleaning product

designed specifically for dishwashers

at least once every two months.

Carefully follow the instructions on

the packaging of the product.

• Use the programme for optimal

cleaning results.

• Do not use abrasive products,

abrasive cleaning pads, sharp tools,

strong chemicals, scourer or solvents.

• Using short-duration programmes

regularly can cause grease and

limescale buildup inside the

appliance. Run long-duration

programmes at least twice a month to

prevent the buildup.

ENGLISH

19

12. TROUBLESHOOTING

WARNING!

Improper repair of the

appliance may pose a

danger to the safety of the

user. Any repairs must be

performed by qualified

personnel.

The majority of problems that may

occur can be solved without the need

to contact an Authorised Service

Centre.

Refer to the below table for information

on possible problems.

With some problems, the display shows

an alarm code.

Problem and alarm code Possible cause and solution

You cannot activate the ap-

pliance.

• Make sure that the mains plug is connected to the

mains socket.

• Make sure that there is no damaged fuse in the fuse

box.

The programme does not

start.

• Make sure that the appliance door is closed.

• Press Start.

• If the delay start is set, cancel the setting or wait for the

end of the countdown.

• The appliance recharges the resin inside the water soft-

ener. The duration of the procedure is approximately 5

minutes.

The appliance does not fill

with water.

The display shows or

.

• Make sure that the water tap is open.

• Make sure that the pressure of the water supply is not

too low. For this information, contact your local water

authority.

• Make sure that the water tap is not clogged.

• Make sure that the filter in the inlet hose is not clogged.

• Make sure that the inlet hose has no kinks or bends.

The appliance does not

drain the water.

The display shows .

• Make sure that the sink spigot is not clogged.

• Make sure that the filter in the outlet hose is not clog-

ged.

• Make sure that the interior filter system is not clogged.

• Make sure that the drain hose has no kinks or bends.

The anti-flood device is on.

The display shows .

• Close the water tap and contact an Authorised Service

Centre.

The appliance stops and

starts more times during op-

eration.

• It is normal. It provides optimal cleaning results and en-

ergy savings.

www.aeg.com20

La page est en cours de chargement...

AEG FFB64606PM Manuel utilisateur

AEG FFB64606PM Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents