Carbon Bow Owner’s Manual

Using the Bow

• Apply rosin to the bow hairs before using. Before using the bow for the first time, apply rosin carefully and

evenly to the whole bow. From the 2nd time, apply a small amount of rosin to the bow hairs.

• Before using the bow, rotate the screw shown in the illustration so that the bow hairs become taut. The

bow stick should be concave and the bow hairs should have medium tension and be evenly taut. If the

bow hairs and bow stick are parallel, the bow is too tight and this may result in damage or trouble to the

bow.

• After use, make sure to loosen bow tension. Also, if powdered rosin has accumulated on the bow stick,

does not come in contact with other persons or ob-

jects. Also, when the bow is not used during perfor-

mance, never use it in a dangerous manner such as

swinging the bow, throwing the bow, etc.

• When storing the bow in its case, make sure the

bow’s hairs are properly loosened before storing.

Cautions Before Using the bow…