Quick Start Guide

Guide de démarrage rapide

BAH2-W19

Contents/Contenu

English........................................................................................... 1

Français..........................................................................................8

i

Your Device at a Glance

Before you start, let's take a look at your new device.

l To power on your device, press and hold the power button until the

restart your device.

1

Getting Started

l Ensure that the card is correctly aligned and that the card tray is

Please use the eject pin included.

BAH2-W19:

2

For More Information

If you encounter any problems while using your device, you can obtain

help from the following resources:

l Visit http://consumer.huawei.com/en to view device information,

frequently asked questions and other information.

l Visit http://consumer.huawei.com/en/support for the most up-to-date

contact information for your country or region.

Go to Settings and touch System > Certication logos to view more

information on certication logos for your product.

All pictures and illustrations in this guide, including but not limited

to the device color, size, and display content, are for your reference

only. The actual device may vary. Nothing in this guide constitutes a

warranty of any kind, express or implied.

3

Safety Information

Please read all of the safety information carefully before using your device

to ensure its safe and proper operation and to learn how to dispose of

your device properly.

l Pacemaker manufacturers recommend that a minimum distance of 15

cm be maintained between a device and a pacemaker to prevent

potential interference with the pacemaker. If using a pacemaker, hold

the device on the side opposite the pacemaker and do not carry the

device in your front pocket.

l Keep the device and the battery away from excessive heat and direct

sunlight. Do not place them on or in heating devices, such as

microwave ovens, stoves, or radiators.

l Observe local laws and regulations while using the device. To reduce

the risk of accidents, do not use your wireless device while driving.

elds.

l When charging the device, make sure the power adapter is plugged

into a socket near the devices and is easily accessible.

4

l Unplug the charger from electrical outlets and the device when not in

use.

l Do not use, store or transport the device where ammables or

explosives are stored (in a gas station, oil depot, or chemical plant, for

example). Using your device in these environments increases the risk of

explosion or re.

This device is also designed to meet the requirements for exposure to

radio waves established by the Federal Communications Commission

(USA).

The SAR limit adopted by the USA is 1.6 W/kg averaged over one gram of

tissue. The highest SAR value reported to the FCC for this device type

complies with this limit.

The highest SAR value reported to the FCC for this device type when

using it in portable exposure conditions is

FCC statement

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

5

--Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help.

to the following two conditions: (1) this device may not cause harmful

The highest SAR value reported to the IC for this device type when using

it in portable exposure conditions is

IC Statement

This device complies with CAN ICES-3 (B)/NMB-3(B).

This device complies with Industry Canada licence-exempt RSS

standard(s). Operation is subject to the following two conditions: (1) this

device may not cause interference, and (2) this device must accept any

interference, including interference that may cause undesired operation

6

Legal Notice

Cet appareil a été vérié et jugé conforme aux limites imposées aux

appareils numériques de classe B, conformément à la partie 15 des

règlements de la FCC. Ces limites sont conçues pour assurer une

installation résidentielle. Cet appareil produit, utilise et peut irradier de

préjudiciables à la réception radiophonique ou télévisuelle, ce que l'on

peut vérier en éteignant et en rallumant l'appareil, l'utilisateur est invité

à essayer de les corriger en suivant l'une des procédures ci-dessous :

-- Réorienter ou déplacer l'antenne de réception.

-- Éloigner l'appareil du récepteur.

-- Brancher l'appareil sur une prise d'un circuit différent de celui sur lequel

le récepteur est branché.

Attention : tout changement ou toute modication à cet appareil non

expressément approuvés par Huawei Technologies Co., Ltd. aux ns de

conformité peuvent entraîner la révocation du droit d'utilisation de

l'appareil par l'utilisateur.

La valeur de DAS maximale signalée à Industrie Canada pour ce type

d'appareil lors de son utilisation dans les conditions d'exposition à des

appareils mobiles est de

Déclaration d'Industrie Canada

aux conditions suivantes : (1) l'appareil ne doit pas causer d'interférence

et (2) l'appareil doit accepter toute interférence, y compris une

interférence pouvant entraîner un fonctionnement non désiré.

Restrictions dans la bande de 5 GHz

Dans la bande de 5,15 à 5,25 GHz, les appareils UNII seront restreints aux

opérations intérieures pour réduire toute possibilité d'interférence

15

Mention légale

consumer.huawei.com/privacy-policy.

CONSTITUE AUCUNE FORME DE GARANTIE.