KINWELL UCM3041-10070 Guide d'installation

KINWELL
Marque
KINWELL
Modèle
UCM3041-10070
Taper
Guide d'installation
UK: MANUFACTURER SPECIALIZED IN: LED wall mounted vanity mirror, LED full length mirror, LED
mirror cabinet.
DE: HERSTELLER SPEZIALISIERT IN: LED-Wandspiegel, LED-Spiegel in voller Länge, LED-Spie-
gelschrank.
FR: FABRICANT SPÉCIALISÉ DANS : Miroir de courtoisie mural à LED, miroir pleine longueur à
LED, armoire de toilette à LED.
ES: ABRICANTE ESPECIALIZADO EN: Espejo de pared LED, Espejo de cuerpo entero LED, Armario
con espejo LED.
IT: PRODUTTORE SPECIALIZZATO IN: LED specchio di vanità montato a parete, LED specchio a tutta
lunghezza, LED armadio a specchio.
LED MIRROR
LED MIRROR
Tools needed for installation
Kits coming with the mirror
Expansion Tube
3+1
Screw
3+1
Junction Box
1
Pencil Screw Driver Rubber Mallet
Electric Drill Tape Measure
03 04
Technical information
LED: SMD2835/378PCS
Lumen:1100lm
CCT: 6500K/3000K/4000K
Size: 100x70cm
Input: 220V
Power: 65W
Ra: >80
*Both vertical&horizontal installation are valid.
Bluetooth is connectable to one device only. If you want to connect the second device, please
foget the first device.
Kind reminder
Instructions for use
The mirror is equipped with 3 touch sensor switch, when installation finished and power connected, the
touch sensor light will be on, it can be turned off by long press when the mirror light is off.
For LED Light
First touch sensor is for the LED light, one click for light on/off, quick clicks on-off-on for color
temperature changing, long press for dimming.
For Demister Pad
Second touch sensor is for the demister pad, before having a shower we can turn it on, when we finish
the shower, the demister pad area would be clear without any fog. Turn if off before leaving.
For Bluetooth Speaker
Third touch sensor is for the bluetooth speaker, when the power connected, it will have a reminder voice
means that it is ready for connecting. Open bluetooth function from the mobile phone, we can find a
signal called mirror multimedia. Click and connect then we can play music from the phone and the music
will come from the speakers backside of the mirror. Turn it off when it is free, avoid the neighbour
connect it by accident.
05 06
Installation steps
Measure the distance between the two brackets
on the back of the mirror and use a level to
mark the same distance on the wall.
Use a hammer to drive the pastic anchors into
the hole drilled with an electric drill, then use the
electric drill to screw the crews into the plastic
anchors.
Connect the wall power cord to the wires
behind the mirror through the junction box.
Align brackets behind the mirror with the
screws on the wall and hang it, installation is
completed.
1 2
3 4
Bluetooth is connectable to one device only. If you want to connect the second device, please
foget the first device.
1. Disconnect from outlet before putting on or taking off parts.
2. Close supervision is necessary when this mirror is used by, or near children.
3. Keep the cord away from heated surfaces.
4. Make sure that the electricity is turned off at the power source before proceeding
with the installation.
5. Always unplug all the power supply cords from before moving the product, testing
the product, or repairing the product.
6. Do not use outdoors.
Warning
  • Page 1 1
  • Page 2 2
  • Page 3 3

KINWELL UCM3041-10070 Guide d'installation

KINWELL
Marque
KINWELL
Modèle
UCM3041-10070
Taper
Guide d'installation
Télécharger le PDF
rapport

dans d''autres langues

Autres documents