CK61 (NI) Compliance Insert
Important Operating Instructions
The Model CK61 Non-Incendive (NI) mobile computer has been qualified by Underwriters Laboratories Inc., to the requirements of the
USA and Canada for use in Class I, Division 2-Groups A, B, C, D; Class II, Division 2-Groups F and G; Class III, Division 2, and Non-
Hazardous locations only. The CK61NI has a T6 temperature code.
This product carries the following approvals. The users of this product are cautioned to use accessories and peripherals approved by Intermec
Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by
Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the
equipment.
Warnings and Cautions
The following additional warnings and cautions must be observed for the safety of the operator and others in potentially hazardous locations:
• The CK61NI must only be used when the ambient temperature is between -20°C and +50°C (-4°F and +122°F).
• The CK61NI may NOT be connected to any of its available accessories while in potentially hazardous locations. This includes anything
that uses the communications docking connector, headset, or microphone jacks. All allowed connections must be made while outside of
the potentially hazardous location.
• The use of CompactFlash, Secure Digital, and SIM Cards in the CK61NI while in potentially hazardous locations is permitted as long as
these cards are not removed or changed while in the hazardous location.
• Any connector cover removed while in ordinary locations must be reinstalled prior to entering a Class II or III potentially hazardous
location.
FCC Digital Emissions Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the radio or television receiving antenna.
• Increase the separation between the computer equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected.
• Consult the dealer or an experienced radio television technician for help.
Caution: This marking indicates that the user should read all included documentation before use.
Attention: Ce marquage indique que l’usager doit, avant l’utilisation, lire toute la documentation incluse.
Warning: Explosion Hazard–Substitution of components may impair suitability for Division 2, Class I, II, and
III locations.
Note: This unit has no operator replaceable parts other than the battery pack. Repair of the CK61NI unit must be
performed by trained Intermec service personnel.
Warning: Explosion Hazard–Batteries must be changed or charged in an area known to be non-hazardous. Use
ONLY Intermec battery pack Model AB11.
Note: From time to time additional battery packs may be added to the qualifications of the CK61NI. Contact your
local Intermec representative if AB11 is no longer available as a replacement battery pack.
Caution: The battery pack used in this device may present a fire or chemical burn hazard if mistreated. Do not
disassemble, heat above 100°C (+212°F) or incinerate. Dispose of used battery packs promptly. Keep away from children.
Specific Absorption Rate (SAR)
Radio Wave Exposure and Specific Absorption Rate (SAR) Information
The FCC permits a maximum SAR value of 1.6 W/kg. For body-worn operation, the highest SAR value for the Model CK61NI, as tested by
Compliance Certification Services, is 0.38W/kg (2.4 GHz); 0.61 W/k (5.3 GHz); 0.49 W/k (5.8 GHz).
This product has been tested and meets the FCC RF exposure guidelines when used with the Intermec accessories supplied or designated for
this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
Canadian Digital Apparatus Compliance
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Conformité aux normes canadiennes sur les appareils numériques
Cet appareil numérique de la class B respecte toutes les exigences du Réglement sur le matériel brouilleur de Canada.
Battery Information
Battery Recycling Information
Note: In the U.S.A., the EPA does not consider spent Li-ion batteries as hazardous waste.
CK61NI Compliance Insert
*933119001*
P/N 933-119-001
Caution: The battery pack used in this device may ignite, create a chemical burn hazard, explode, or release toxic materials
if mistreated. Do not incinerate, disassemble, or heat above 100°C (212°F). Charge only with Intermec Models AC4, AD3,
AD4, AD5, AD6, and AV3. Do not short circuit; may cause burns. Keep away from children.
Use only Intermec battery pack Model AB11. Risk of fire or explosion if incorrect battery pack is used. Promptly dispose
of used battery pack according to the instructions.
Attention: Le block-plies utilisé dans cet appareil peut prendre feu, constituer un risque de brûlure chimique, exploser ou
dégager des substances toxiques s’il est manipulé de façon inappropriée. Ne pas jeter au feu, démonter ou chauffer à plus
de 100°C (212°F). Ne charger qu’avec les dispositifs Intermec AC4, AD3, AD4, AD5, AD6, et AV3. Ne pas court-circuiter;
cela pourrait causer des brûlures. Garder hors de la portée des enfants.
N’utiliser que le modèle de bloc-plies Intermec AB11. L’utilisation d’un mauvais bloc-plies pourrait constituer un risque
d’incendie ou d’explosion. Mettre rapidement au rebut tout bloc-plies usé, conformément aux instructions.
Li-ionLi-ion
This product contains or uses a lithium ion (Li-ion) main battery. When the battery reaches the end of its useful life, the
spent battery should be disposed of by a qualified recycler or hazardous materials handler. Do not mix this battery with the
solid waste stream. Contact your Intermec Technologies Service Center for recycling or disposal information.
Ce produit contient une batterie principale d’ions de lithium (Li-ion). Lorsque la batterie atteint la fin de sa durée de vie
utile, la batterie usées doivent être mises aux rebuts par un agent de recyclage ou un manipulateur de matériaux dangereux
agréé. Il ne faut pas mélanger la batterie aux autres déchets solides. Pour plus d’informations sur le recyclage ou la mise aux
rebuts, contacter votre centre de services Intermec Technologies.
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
©
2007 Intermec Technologies
Corporation. All rights reserved.
-
1
-
2
dans d''autres langues
- English: Intermec CK61NI
Documents connexes
-
Intermec AD6 Supplementary Manual
-
Intermec AC4 Supplementary Manual
-
-
-
-
Intermec IP30NI Supplementary Manual
-
Intermec PB50 Supplementary Manual
-
Intermec CN3 Series Supplementary Manual
-
Intermec CK32 Supplementary Manual
-