Sollae Systems CIE-H12A Manuel utilisateur

Sollae Systems Co., Ltd.

https://www.ezTCP.com

1port Remote I/O Controller

(dry / wet contact support)

CIE-H12A User Manual

Version 1.1

CIE-H12A User Manual Ver. 1.1

- 1 -

https://www.ezTCP.com

This symbol, found on your product or on its packaging, indicates that this

product should not be treated as household waste when you wish to dispose

of it. Instead, it should be handed over to an applicable collection point for the

recycling of electrical and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential negative consequences to the

environment and human health, which could otherwise be caused by inappropriate disposal

of this product. The recycling of materials will help to conserve natural resources. For more

detailed information about the recycling of this product, please contact your local city

office, household waste disposal service or the retail store where you purchased this

product.

CIE-H12A User Manual Ver. 1.1 
 
- 2 - 
https://www.ezTCP.com 
 
Contents 
Contents ............................................................................................................................................ - 2 - 
1 Introduction ............................................................................................................................. - 5 - 
1.1  Introduction .......................................................................................................................................................... - 5 - 
1.2  Features .................................................................................................................................................................. - 5 - 
1.3  Application Examples ....................................................................................................................................... - 6 - 
1.4  Specification ......................................................................................................................................................... - 7 - 
1.4.1
 
H/W specification ..................................................................................................................................... - 7 -
 
1.4.2
 
S/W specification ...................................................................................................................................... - 7 -
 
1.5  Interface ................................................................................................................................................................. - 8 - 
1.5.1
 
Input Ports ................................................................................................................................................... - 8 -
 
1.5.2
 
Output Ports ............................................................................................................................................ - 10 -
 
1.5.3
 
Ethernet Interface .................................................................................................................................. - 11 -
 
1.5.4
 
Power ........................................................................................................................................................... - 11 -
 
1.5.5
 
System LED ............................................................................................................................................... - 12 -
 
1.5.6
 
ISP Switch .................................................................................................................................................. - 12 -
 
2 Installation and Test ............................................................................................................ - 13 - 
2.1  Installation .......................................................................................................................................................... - 13 - 
2.1.1
 
Setting Network Aera .......................................................................................................................... - 13 -
 
2.2  Test operation ................................................................................................................................................... - 15 - 
2.2.1
 
Modbus/TCP Test ................................................................................................................................... - 15 -
 
2.2.2
 
HTTP Test with a WEB browser ....................................................................................................... - 17 -
 
3 Configuration ....................................................................................................................... - 18 - 
3.1  Configuration with ezManager ................................................................................................................. - 18 - 
3.1.1
 
Configuration via LAN ......................................................................................................................... - 18 -
 
4 Operation Modes ................................................................................................................ - 19 - 
4.1  What is the Operation Mode? .................................................................................................................. - 19 - 
4.2  How to change the mode to another .................................................................................................. - 19 - 
4.3  Comparison of the each mode ................................................................................................................ - 20 - 
4.4  Normal Mode ................................................................................................................................................... - 20 - 
4.5  ISP mode............................................................................................................................................................. - 20 - 
4.5.1
 
Upgrading Firmware............................................................................................................................. - 20 -
 
4.5.2
 
Upgrading HTML ................................................................................................................................... - 20 -
 
4.5.3
 
Revoking Serurity Options................................................................................................................. - 20 -
 

CIE-H12A User Manual Ver. 1.1 
 
- 3 - 
https://www.ezTCP.com 
 
5 Methods for I/O control .................................................................................................... - 21 - 
5.1  MODBUS/TCP ................................................................................................................................................... - 21 - 
5.1.1
 
Related Parameters ............................................................................................................................... - 21 -
 
5.1.2
 
Modbus/TCP Slave Mode .................................................................................................................. - 22 -
 
5.1.3
 
Modbus/TCP Master Mode ............................................................................................................... - 22 -
 
5.1.4
 
TCP Connection Modes ...................................................................................................................... - 23 -
 
5.1.5
 
Initial Output Value ............................................................................................................................... - 23 -
 
5.1.6
 
Write Pulse ................................................................................................................................................ - 23 -
 
5.1.7
 
Communication with HMI ................................................................................................................. - 24 -
 
5.2  Macro Mode ...................................................................................................................................................... - 25 - 
5.2.1
 
Operator ..................................................................................................................................................... - 25 -
 
5.2.2
 
Operand ..................................................................................................................................................... - 25 -
 
5.2.3
 
An Example of Equations ................................................................................................................... - 26 -
 
5.3  Monitoring and controlling on Web (HTTP) ...................................................................................... - 27 - 
5.3.1
 
Changing port number for HTTP ................................................................................................... - 27 -
 
5.3.2
 
Uploading Users’ Webpage .............................................................................................................. - 28 -
 
6 System Management .......................................................................................................... - 29 - 
6.1  Upgrading Firmware ...................................................................................................................................... - 29 - 
6.1.1
 
Firmware .................................................................................................................................................... - 29 -
 
6.1.2
 
Processes ................................................................................................................................................... - 29 -
 
6.2  Changing Homepage .................................................................................................................................... - 30 - 
6.2.1
 
Webpage ................................................................................................................................................... - 30 -
 
6.2.2
 
Processes ................................................................................................................................................... - 30 -
 
6.3  Status Monitoring ........................................................................................................................................... - 32 - 
6.3.1
 
Using TELNET .......................................................................................................................................... - 32 -
 
6.3.2
 
Checking status by ezManager ....................................................................................................... - 35 -
 
7 Additional Functions ........................................................................................................... - 37 - 
7.1  Security ................................................................................................................................................................ - 37 - 
7.1.1
 
Restriction of Access (ezTCP Firewall) .......................................................................................... - 37 -
 
7.1.2
 
Setting Password .................................................................................................................................... - 37 -
 
7.2  Option Tab Functions .................................................................................................................................... - 38 - 
7.2.1
 
Notify IP Change ................................................................................................................................... - 38 -
 
7.2.2
 
Debugging Message ............................................................................................................................ - 39 -
 
7.3  I/O Tab Functions ............................................................................................................................................ - 41 - 
7.3.1
 
Notify Input or Output Port Change............................................................................................ - 41 -
 
7.3.2
 
Valid Time .................................................................................................................................................. - 43 -

CIE-H12A User Manual Ver. 1.1

- 4 -

https://www.ezTCP.com

7.3.3

Delay ............................................................................................................................................................ - 43 -

7.4 Internet Switch ................................................................................................................................................. - 43 -

8 Self-Test in Trouble ............................................................................................................. - 44 -

8.1 Searching problem with ezManager ...................................................................................................... - 44 -

8.2 Connection Problem over Modbus/TCP .............................................................................................. - 45 -

8.3 Communication Problem over Modbus/TCP ..................................................................................... - 46 -

9 Technical Support and Warranty ...................................................................................... - 47 -

9.1 Technical Support ........................................................................................................................................... - 47 -

9.2 Warranty .............................................................................................................................................................. - 47 -

9.2.1

Refund ......................................................................................................................................................... - 47 -

9.2.2

Free Repair Services ............................................................................................................................. - 47 -

9.2.3

Charged Repair Services..................................................................................................................... - 47 -

10 Precaution and Exemption from Liability ....................................................................... - 48 -

10.1 Precaution........................................................................................................................................................... - 48 -

10.2 Exemption from Liability .............................................................................................................................. - 49 -

10.2.1

English version ........................................................................................................................................ - 49 -

10.2.2

French version ......................................................................................................................................... - 49 -

11 History ................................................................................................................................... - 52 -

CIE-H12A User Manual Ver. 1.1

- 5 -

https://www.ezTCP.com

1 Introduction

1.1 Introduction

In the era of Ubiquitous Environment, many kinds of systems which use sensors like

temperature, humidity or pressure and controlling the power of remote devices have been

developing. CIE-H12A monitors those sensors and controls the remote devices. It detects

digital inputs from the sensors’ outputs and controls the relay outputs. HTTP, Modbus/TCP

and Macro mode can be used for these functions.

CIE-H12A has two input ports and one output port. One of the input ports is a dry-

contact type and the other one is wet-contact. Thus, you are allowed to use it under both

types of systems.

1.2 Features

⚫ Remote I/O controller

⚫ 2 Digital Input ports (Dry contact 1 port, Wet contact 1 port)

⚫ 1 Digital Output Port (Relay interface)

⚫ Supports Modbus/TCP and HTTP

⚫ Stored Web server for simple management (custom web page)

⚫ MACRO (stand-alone operation supports simple logical expressions)

⚫ Easy configuration program (ezManager)

CIE-H12A User Manual Ver. 1.1

- 6 -

https://www.ezTCP.com

1.3 Application Examples

⚫ remote I/O device server

Figure 1-1 remote I/O device server

⚫ Internet Switch

Figure 1-2 internet switch

⚫ Macro mode

Figure 1-3 macro mode

CIE-H12A User Manual Ver. 1.1

- 7 -

https://www.ezTCP.com

1.4 Specification

1.4.1 H/W specification

Power

Input Power

DC 5V (±10%)

Current Consumption

300mA typical

Size

96mm x 57mm x 24mm

Weight

Approximately 68g

Interfaces

Digital Input

2 ports with photo couplers (2 input types)

Digital Output

1 port with relays

Network

RJ45

Network

Ethernet 10Base-T or 100Base-TX (Auto-Sensing)

Auto MDI/MDIX(Cable Auto-sensing)

Temperature

Operate: 0 ~ 70℃ / Storage: -40 ~ 85℃

Certification

CE, KC

Environment

Follows Europe RoHS Directive

Table 1-1 H/W specification

1.4.2 S/W specification

Protocol

TCP, UDP, IP, ICMP, ARP, DHCP, DNS lookup, DDNS,

Modbus/TCP, HTTP, SMTP

Diagnose

Online Debugging Function

Operation

mode

Normal

Normal communication mode

ISP

F/W upgrade

Communicati-

on Mode

I/O server

Modbus/TCP – Slave/Master, Passive/Active

Web Browser(HTTP), Macro(Stand-alone)

Programs

ezManager

Configuration program via LAN

ModMap

Modbus/TCP Application for Windows

Table 1-2 S/W specification

CIE-H12A User Manual Ver. 1.1

- 8 -

https://www.ezTCP.com

1.5 Interface

1.5.1 Input Ports

CIE-H12A has two input ports and the each has different type with the other. The one is

a “DRY CONTACT” type and the other one is a “WET CONTACT.”

Figure 1-4 input ports (the front view)

In the front panel, the DRY IN(0) port is the dry contact type and the WET IN(1) port is

the wet contact type.

⚫ The switch input type (Dry contact)

The first input port is a dry contact type so you can give the input signal by a switch.

Basically, this port is the same with the port WET IN(1) but has additional part for dry

contact. Just use a switch for giving signal to this port.

Figure 1-5 the dry contact input port

CIE-H12A User Manual Ver. 1.1

- 9 -

https://www.ezTCP.com

⚫ The voltage input type (Wet contact)

Figure 1-6 the wet contact input port

You can give a DC voltage to input signal to this port. This port is isolated by photo-

couplers and you don’t have to care about the polarity. The circuit diagram of the

input port is shown in the figure below.

Figure 1-7 a circuit diagram of the input port

The voltage specification of the input port is as follows:

Over 2.2V

H

1

Under 1.2V

L

0

Max. Input Voltage

DC 24V

Polarity

Auto Polarity

Table 1-3 the voltage specification of the input ports



Use a (-) shaped screwdriver to connect it with users’ devices since the output ports

are interfaced with a 3.5mm terminal block,

CIE-H12A User Manual Ver. 1.1

- 10 -

https://www.ezTCP.com

1.5.2 Output Ports

Figure 1-8 the output port (the front view)

The port 5 and 6 (OUTPUT) is output port and this port is interfaced with a relay (NO :

Normal Open) as shown below.

Figure 1-9 a circuit diagram of the output port

The output port operates as in the following

Value

Relay contact

0

OFF (open)

1

ON (short)

Table 1-4 values of the output port

The allowed output ports’ electrical current of voltage conditions are as in the following:

Voltage Condition

Allowed current

DC28V

5A

Table 1-5 voltage conditions of the output port



Use a (-) shaped screwdriver to connect it with users’ devices since the output ports

are interfaced with a 3.5mm terminal block,



CIE-H12A is most appropriate for switching devices in lower voltage conditions than

that. Or High capacity relay is recommended.

CIE-H12A User Manual Ver. 1.1

- 11 -

https://www.ezTCP.com

1.5.3 Ethernet Interface

An RJ45 connector is for the network interface of CIE-H12A. You can use a UTP cable. It

automatically senses 10Mbits or 100Mbits Ethernet. It also provides auto MDI/MDIX

function that can automatically sense a 1:1 cable or cross over cable.

Each Ethernet device has its own hardware address (MAC address). CIE-H12A is shipped

to the market with the hardware address set in the factory.

Figure 1-10 the RJ45 connector

1.5.4 Power

DC 5V is used for the power. The specification of the power jack is as following:

Figure 1-11 the power specification

CIE-H12A User Manual Ver. 1.1

- 12 -

https://www.ezTCP.com

1.5.5 System LED

CIE-H12A has 2 LEDs on RJ45 and the current system status LEDs for out port and input

ports.

Each LED represents the following status:

place

name

color

LED status

description

RJ45

STS

Yellow

blinks in

every second

assigned an IP address

blinks 4

times at

once

without being assigned an IP address

by DHCP

On

establishing a TCP connection

Off

operating for the ISP mode

LINK

Green

On

establishing a connection on a network

blinks

transferring or receiving network data

Front

panel

DI

Yellow

On

when input ports’ signal is ON

DO

Green

On

when the output port’s signal is ON

Table 1-6 status of the system LED

1.5.6 ISP Switch

There is an ISP switch located on the side of the product. This button is for changing the

mode to the ISP mode. If you press it over a second or supply power while pressing it, CIE-

H12A will be operated as the ISP mode. In this mode, you can download the firmware file

or HTML files.

Figure 1-12 ISP switch



In the ISP mode, you are allowed to reset a password or cancel access restriction. Use

these modes when you are faced with the problems.

CIE-H12A User Manual Ver. 1.1

- 13 -

https://www.ezTCP.com

2 Installation and Test

2.1 Installation

In this section, we explain the way of CIE-H12A operation through a test. Basically, its

input and output ports are independently used. Thus, you can use either the input ports

only for monitoring or the output ports only for control. However, you can also correlatively

use those ports by using the MACRO mode on the output ports.

Before testing CIE-H12A, you should connect the Ethernet port to a PC. It will be no

problem if the Ethernet connection is established through network hubs.

Figure 2-1 the connection between CIE-H12A and a PC

2.1.1 Setting Network Aera

This step is for setting both CIE-H12A and your PC to be located on the same network to

establish a TCP connection.

⚫ Setting of the PC

Add or change the IP address of the network adapter on your PC.

Click [Windows Control Panel] >> [Network Connections] and right click of your

mouse to get into [Properties of the Network Adapter], then you will see the

properties of [Internet Protocol (TCP/IP)]. Press the [Advanced Menu] button and add

an IP Address as shown below.

Figure 2-2 adding / changing an IP address

CIE-H12A User Manual Ver. 1.1

- 14 -

https://www.ezTCP.com

⚫ Setting of CIE-H12A

ezManager is the management tool for configuration of CIE-H12A. This application is

only for MS Windows and this is comfortable to use because it does not need

installation process.

First, search your CIE-H12A via network. All the values of parameters are set to the

default values in the factory. To apply it to your system, proper values should be set

via ezManager.

Default values of some major parameters are listed on the table below. To do the

following simple test, keep these values during the test.

Parameters

Values

Network

Local IP Address

10.1.0.1

Subnet Mask

255.0.0.0

Option

Telnet

Checked

IP Address Search

Checked

I/O Port

Web (HTTP)

Checked

Web (HTTP) Port

80

Modbus/TCP

Checked

Master/Slave

Slave

Connection Mode

Passive Connection

Multiple Connection

1

Local Port

502

Table 2-1 default values of some major parameters



You can download the latest version of ezManager on the [Download] >> [Utility] page

on our website.

CIE-H12A User Manual Ver. 1.1

- 15 -

https://www.ezTCP.com

2.2 Test operation

2.2.1 Modbus/TCP Test

This is for checking the operation of Input and output ports of CIE-H12A via Modbus/TCP.

In this instruction, offered Modbus/TCP test program was used.

Run ezManager. Then, you can see the window as shown below.

Figure 2-3 Modbus/TCP test program of the ezManager

① Search connected CIE-H12A with [Search All] button.

② Select a MAC address of searched product on the [search result].

③ Check the [Advanced Menu] option.

④ Press the [Modbus/TCP] button.

⑤ The test program will appear on the right side of the ezManager



In the case of using previous versions of ezManager than 3.1F the test program is

shown automatically when you success in searching the product.

CIE-H12A User Manual Ver. 1.1

- 16 -

https://www.ezTCP.com

⚫ Modbus/TCP test

Figure 2-4 Modbus/TCP test

① Input the IP address of CIE-H12A

② Input the local port for Modbus/TCP of CIE-H12A



In a local area network, ① and ② steps can be omitted.

③ Try to connect by pressing [Connect] button

④ Then, check if the input LEDs are turned on or off with signal input

⑤ Check if the output LED is turned on or off with clicking the LEDs

⑥ Click the [Disconnect] button after the test is completed

CIE-H12A User Manual Ver. 1.1

- 17 -

https://www.ezTCP.com

2.2.2 HTTP Test with a WEB browser

This is for testing the operation of Input and output ports of CIE-H12A via HTTP. The test

was implemented on a WEB browser. You can use WEB browsers such as MS Internet

Explorer, Google Chrome and Mozilla Firefox.

Figure 2-5 HTTP test

① Input the IP address of your CIE-H12A on the address field (Ex: 10.1.0.1).

② Check if the input LEDs are turned on or off with HIGH signal.

③ Check if the output LED is turned on or off with clicking the each of LEDs.

④ Press the [Read] button to update the status.

⚫ The way to control output ports manually

On/Off

Pulse

Parameter

o0 (Lower case)

p0 (Lower case)

Value

ON

OFF

Time (ms)

1

0

1~10000

Example

http://10.1.0.1/index.html?o0=1

http://10.1.0.1/index.html?p0=1000

Table 2-2 The way to control output ports manually

CIE-H12A User Manual Ver. 1.1

- 18 -

https://www.ezTCP.com

3 Configuration

3.1 Configuration with ezManager

Figure 3-1 initial appearance of ezManager

3.1.1 Configuration via LAN

⚫ Checklists

Make sure of the connection between your PC and CIE-H12A via Ethernet. If they are

in the same network, [MAC Address search] button can be used. Otherwise, only [IP

Address search] is allowed to use.

⚫ Procedures

Figure 3-2 procedures for configuration via LAN

CIE-H12A User Manual Ver. 1.1

- 19 -

https://www.ezTCP.com

4 Operation Modes

4.1 What is the Operation Mode?

Each of two operation modes are designed for specific purposes, and those are as

follows:

⚫ Normal mode

This mode is for normal data communication and has 3 communication modes.

Configuring parameters is also available in this mode.

⚫ ISP mode

This mode is for upgrading firmware and HTML files. In addition, you can set

environmental parameters even though the security options are activated. You can

also reset the security options.

4.2 How to change the mode to another

Figure 4-1 how to initiate each operation mode

① Push the function button over 1 second.

② Transfer a firmware via ezManager

La page charge ...

Sollae Systems CIE-H12A Manuel utilisateur

Sollae Systems CIE-H12A Manuel utilisateur

dans d''autres langues