Bosch SHE3AR72UC/22 Manuel utilisateur

Catégorie
Lave-vaisselle
Taper
Manuel utilisateur
Dishwasher
en Operating instructions
Guide d’Utilisation fr
Lave-Vaisselle
9001124245 (9511)
Dear Valued Customer,
Thank you for selecting a Bosch® dishwasher. You have joined the many
consumers who demand quiet and superior performance from their
dishwashers.
This manual was written with your safety and convenience in mind, and the
information contained herein is very important. We highly recommend that you
read this manual before using your dishwasher for the first time.
To learn more about your dishwasher and available accessories, as well as many
other top quality Bosch® appliances, visit our web site at:
www.bosch-home.com/us (USA)
or
www.bosch-home.ca (Canada)
While there, don’t forget to register your new dishwasher by clicking on the
“Support” tab or filling out the product registration card enclosed with your
new unit.
If you have any questions or comments, please contact us by phone at:
1-800-944-2904
or write us at:
BSH Home Appliances Corporation
1901 Main Street, Suite 600
Irvine, CA 92614
Table of Contents
IMPORTANT SAFETY INSTRUCTIONS...................................................................... 2
Dishwasher Components ..........................................................................................4
Dishwasher Features ................................................................................................5
Loading the Dishwasher ...........................................................................................6
Loading the Silverware Basket ................................................................................8
Rack Accessories ....................................................................................................10
Adding Detergent and Rinse Agent .......................................................................10
Dishwasher Cycles and Options ............................................................................12
Wash Cycle Information .........................................................................................13
Operating the Dishwasher .....................................................................................13
Care and Maintenance ...........................................................................................15
Troubleshooting .....................................................................................................16
Customer Service ...................................................................................................18
Warranty Information .............................................................................................20
2
9 IMPORTANT SAFETY INSTRUCTIONS:
Please READ and SAVE this information
Misuse of the dishwasher can result in serious injury or death. Do not use the dishwasher in any way
not covered in this manual or for any purpose other than those explained in the following pages.
Severe product damage and/or injury could result from the use of unqualified service technicians or
non-original replacement parts. All repairs must be performed by a qualified service technician using
only original equipment factory replacement parts.
Electrical shock or fire could result if the electrical supply for the dishwasher covered in this manual is
incorrectly installed or if the dishwasher has been improperly grounded. Do not use the dishwasher
covered in this manual unless you are certain the electrical supply has been correctly installed and the
dishwasher has been properly grounded.
Never use harsh chemicals to clean your dishwasher. Some chloride-containing products can damage
your dishwasher and may present health hazards!
To avoid risk of injury (burn), always use caution when opening the door during or following a wash
cycle as hot water or steam may escape. Do not fully open the door until water noises have stopped
and steam has subsided..
Never use steam cleaning products to clean your dishwasher. The manufacturer will not be responsible
for the possible damages or consequences.
It is highly recommended for the end user to become familiar with the procedure to shut off the incom-
ing water supply and the procedure to shut off the incoming power supply. See the Installation Instruc-
tions or contact your installer for more information.
To avoid possible dishwasher damage, do not use harsh chemicals, abrasive cleaners, scouring pads
(metal or plastic), or abrasive cloths/paper towels to clean your dishwasher’s exterior door panel.
Your dishwasher's exterior door panel can be damaged by doing so.
NSF/ANSI 184 Certified residential dishwashers are not intended for licensed food establishments.
9WARNING
NOTICE
3
WARNING: To reduce the risk of fire, electrical
shock, or serious injury, observe the following:
1 This dishwasher is provided with Installation Instructions and this Use and Care Manual
(operating instructions). Read and understand all instructions before using the dish-
washer.
2 This appliance must be grounded to a metal, permanent wiring system, or an equipment
grounding conductor must be run with the circuit conductors and connected to the equip-
ment grounding terminal or lead on the dishwasher. See the Installation Instructions
included with this dishwasher for more information on electrical requirements.
3 Use this dishwasher only for its intended function, which is the washing of household dish-
ware and kitchenware rated as dishwasher safe.
4 Use only detergents or rinsing agents recommended for use in a dishwasher, and keep
them out of the reach of children.
5 When loading items to be washed:
• Locate sharp items so they are not likely to damage the door seal.
• Load knives and other sharp utensils with their HANDLES UP to reduce the risk of
cut-type injuries.
• Do not wash plastic items unless they are marked “dishwasher safe” or the
equivalent. For plastic items not so marked, check the manufacturer’s recom-
mendations.
• Do not operate your dishwasher unless all enclosure panels are in place.
• Do not tamper with or override controls and interlocks.
6 Do not abuse, sit or stand on the door or dish racks of the dishwasher.
7 To reduce risk of injury, do not allow children to play in or on the dishwasher.
8 When children become old enough to operate the appliance, it is the responsibility of the
parents/legal guardians to ensure the children are instructed in safe practices by qualified
persons.
9 Under certain conditions, hydrogen gas may be produced in a hot water system that has
not been used for two weeks or more. Hydrogen gas is explosive. Before using a dish-
washer that is connected to a hot water system that has been unused for two weeks or
longer, turn on all hot water faucets and let the water flow from each for several minutes.
This will release any accumulated hydrogen gas. As the gas is explosive, do not smoke or
use an open flame during this time.
10 Remove the dishwasher door to the washing compartment when removing an old dish-
washer for service or discarding.
11 To avoid floor damage and possible mold growth, do not allow wet areas to remain around
or under the dishwasher.
12 Protect your dishwasher from the elements. Protect against freezing to avoid possible
damage to the fill valve. Damage caused by freezing is not covered by the warranty.
13
This appliance must be grounded. In the event of a malfunction or breakdown, grounding
will reduce the risk of electric shock by providing a path of least resistance for electric cur-
rent. This appliance is equipped with a cord having an equipment-grounding conductor.
• Improper connection of the equipment-grounding conductor can result in risk
of electric shock. Check with a qualified electrician or service representative if
you are in doubt whether the appliance is properly grounded.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to
cause cancer, birth defects, or other reproductive harm.
4
Dishwasher Components
* “#” can be any number
SHE3AR7#UC*/SHE3ARB#UC*
SHE3ARF#UC*
SHX3AR7#UC*
* “#” can be any number
Wash Cycles Additional Features
Model
Heavy
Wash
Auto
Wash
Normal
Wash
Delicate
Wash
Express
Wash
Half
Load
Rinse &
Hold
Adjustable
Upper Rack
Child
Lock
Delay
Start
Flip
Tines
Sanitize
Option
Silverware
Basket
SHE3AR7#UC*
SHE3ARB#UC*
XXX X XX X XXXXLong
SHE3ARF#UC* X X X X X X X X X X X Double-
Flex
SHX3AR7#UC* X X X X X X X X X X Double-
Flex
Start
Resume
Reset 3 sec.
Start
Resume
Reset 3 sec.
Rinse
& Hold
Start
Resume
Reset 3 sec.
5
Dishwasher Features
Self-Latching Door: The self-latching feature will hold the door wherever you place it and then automatically latch when open
20 degrees or less.
Delay Start: Delays the start time of your dishwasher by 3, 6, or 9 hours.
EcoSense Wash Management System:
Checks water condition and decides if a second fresh water fill is necessary.
Extra Dry Heat: Raises the temperature of the rinse and increases the drying time resulting in improved drying.
Flow-Through Heater™: Quickly and efficiently heats water to a sanitizing temperature.
Noise Reduction System: Uses Suspension Motor™, a two-pump motor system, and insulation to make this dish-
washer part of the quietest dishwasher line in North America.
Nylon Coated Racks: Eliminates cuts and nicks and have a five year warranty.
OptiDry®: This feature senses when the unit is low on rinse agent and automatically increases the drying time.
Sanitize: An option to meet sanitized conditions and improve drying results. This option can only be used with cer-
tain wash cycles. See page 12.
Triple Filtration System: Uses multiple filters to ensure distribution of clean water and protect the main pump
and the drain pump from foreign material.
Model dependent features:
Adjustable Rack:
The upper rack can be raised or lowered manually to accommodate tall items in the upper
and lower racks.
Flip Tines: Increase the rack flexibility to accommodate larger/taller items.
Upper rack
Vent
Lower rack
Detergent dispenser
Rinse aid dispenser
Upper rack spray arm
Lower rack spray arm
Silverware basket
Filter system
6
Dishware Materials
NOTE: Before using your dishwasher for the first time, check the information in this section. Some items are not dish-
washer safe and should be hand washed; others require special loading.
Recommended:
Aluminum: Colored anodized aluminum may fade over time. Minerals in your water may cause the aluminum to
darken or spot. This can usually be removed with a soap-filled steel wool pad.
China, Crystal, Stoneware: Some hand-painted utensils may discolor, fade or spot. Hand wash these utensils.
Position fragile glassware so that it will not topple over or come in contact with other utensils during the wash
cycle.
Glass: Milk glasses may discolor or become yellow.
Non-stick Coatings: Apply a light coating of vegetable oil to non-stick surfaces after drying.
Plastics: Make sure the plasticware is dishwasher safe.
Stainless Steel, Sterling Silver and Silver Plates: Load these so they do not come in contact with other metals.
Not Recommended:
Acrylic: Crazing or small cracks throughout the acrylic, may occur.
Adhesive-Joined Pieces: Adhesives that join materials such as plastic, wood, bone, steel copper, tin, etc. may
loosen.
Bone-Handled Utensils: Handles may separate.
Iron: Iron will rust. Hand wash and dry immediately.
Non-Dishware Items: Your dishwasher is intended for use in cleaning ONLY standard household dishware and kitchen-
ware.
Pewter, Brass, Bronze: These items will tarnish. Hand wash and dry immediately.
Tin: Tin will stain. Hand wash and dry immediately.
Wood: Wooden bowls, wooden utensils and utensils with wooden handles can crack, warp and lose their finish.
Loading the Dishwasher
Do not pre-wash items with loosely attached soiling. Remove all food particles, bones, toothpicks and excessive
grease. Items having burned-on, baked-on or starchy soils may require some pretreatment. Refer to the Dishware
Materials section for more information about dishware suitability.
Load only dishwasher safe items into the dishwasher. Load dishes in the dishwasher racks so the insides of
bowls, pots and pans are facing the spray arms. Avoid nesting and contact points between dishes. Separate
items of dissimilar metals.
WARNING
The sharp points and edges of knives and other sharp utensils can cause serious injuries. Load knives and other
sharp utensils with edges down. Do not allow children to handle or play near knives and sharp utensils.
NOTICE
To avoid dishwasher damage, do not load the dishwasher with paper products, plastic bags, packing materials or
anything other than normal, dishwasher safe dishware and kitchenware.
Loading the Upper Rack
Ensure items do not protrude through the bottom of the racks and block the spray arms.
NOTE: When pushing the upper rack into the dishwasher, push it until it stops against the back of the tub so the upper rack
spray arm connects to the water supply at the back of the tub. Do not push racks in using the door.
Loading the Lower Rack
Place large items in the lower rack. Load pots, pans and bowls upside down. Do not block vent with tall baking
sheets. Load these items on the left side of the dishwasher.
Unloading the Dishwasher
When unloading the dishwasher it is best to unload the lower rack first. Next, unload the silverware basket fol-
lowed by the upper rack.
7
Lower Rack
Additional Loading Pattern
Upper Rack
Upper Rack
Suggested Loading Pattern
Lower Rack
8
Loading the Silverware Basket
Place knives and sharp utensils with their HANDLES UP and forks and spoons with their handles down. If large or
oddly-shaped items are loaded in the silverware basket, be sure they do not nest together.
WARNING
The sharp points and edges of knives and other sharp utensils can cause serious injury. Load knives and other
sharp utensils with edges down. Do not allow children to handle or play near knives and sharp utensils.
The Double-Flex Silverware Basket (select models)
This basket splits along its length, resulting in two halves that may
be placed in a variety of positions in the lower rack, greatly increas-
ing the lower rack’s loading versatility. The basket snaps together
either back to back or end to end as shown.
To split the Double-Flex Silverware Basket
Grasp the basket and slide the two halves in opposite directions as
shown at right and then pull the two halves apart.
Double-Flex Basket Placement Options
The Long Silverware Basket (select models)
The long silverware basket fits along the side of the lower rack.
Long Basket Placement Option
The basket lid may also be snapped to the handle in order to leave the basket open.
9
Loading pattern for Long Silverware Basket
Loading pattern for Double-Flex™ Silverware Basket
12345
6
7
1- salad fork
2- teaspoon
3- dinner fork
4- knife
5 - tablespoon
6 - serving spoon
7 - serving fork
4
4 4 4 4 4
3
3 3 3 3 3
1 1
1 1 1 1
6
2
2
2
2
2 2 2
2
2 2 2
2
Lft id LONG il b k t
2 2 2
2
2 2
2 2
2
2 2
6
2
4
3
1
4
3
1
4
3
1
7 4
3
1
4
3
1
4
3
1
10
Figure 1
Figure 2
Figure 3
Rack Accessories
Flip Tines (model dependent)
The racks consist of tines that can be folded down depending on what you may need
to load in the rack. To fold down, grasp the folding tine and release from notch. Push
folding tine downward to desired position as shown in Figure 1.
Adjustable Upper Rack (model dependent)
Remove the empty upper rack by pulling it out of the dishwasher until it can be lifted
upward as show in Figure 2. Pull the rack up and out until the rollers are completely
free of the roller guides.
Re-insert the rack with the other set of rollers on the roller guides as shown in
Figure 3
.
Adding Detergent and Rinse Agent
Detergent
Use only detergent specifically designed for dishwashers. For best results, use fresh powdered dishwashing
detergent or detergent tabs.
NOTICE
To avoid dishwasher damage, do not use hand dishwashing products in your dishwasher.
To avoid dishwasher damage, do not use too much detergent if your water is soft. Using too much detergent with
soft water may cause etching in glassware.
This dishwasher uses less water than most, therefore, less detergent is required. With soft water, 1 tablespoon
(15 ml) of detergent will clean most loads. The detergent dispenser cup has lines that measure detergent to 1
tablespoon (15 ml) and 1.75 tablespoons (25 ml). 3 tablespoons (45 ml) of detergent will completely fill the
detergent dispenser.
NOTE: If you do not know the hardness of your water supply, use 15ml of detergent. Increase the amount if necessary to
the least amount required to get your kitchenware clean.
Use the measuring lines in the detergent dispenser cup as a guide to measure the amount of detergent recom-
mended in Table 1 on page 11.
11
Figure 5
Figure 4
Figure 6
Figure 7
Adding Detergent
1 tablespoon (15ml) will clean most loads (see Figure 4).
Do not use more than 3 tablespoons (45ml).
Do not over fill the detergent dispenser.
When using detergent tabs, lay them flat to avoid contact with the cover.
To Close
Place finger as shown in Figure 5.
Slide door closed and press down firmly until it clicks.
To Open
To open the cover, push the button as shown in Figure 6.
Cover will slide open.
Rinse Aid
To achieve proper drying, always use a liquid rinse aid, even if your deter-
gent contains a rinse aid or drying additive.
NOTE: The dishwasher indicates low rinse aid by turning on the “Refill Rinse Aid”
LED in the display. If this light is on, you need to refill the rinse aid dispenser by fol-
lowing the directions below.
Adding Rinse Aid
NOTICE
To avoid oversudsing or clogging, do not overfill the rinse aid dispenser.
Wipe up any spills with a damp cloth.
1 Add liquid rinse aid to the dispenser until it is full (see Figure 7). Do not overfill.
2 Close the lid. Lid must be fully closed until it clicks in order to seal.
3
Wipe up any excess rinse aid that may have puddled when the dispenser reservoir is full.
The indicator light will go out a few moments after the dishwasher door is shut. See page 14 for instructions on
how to adjust the amount of rinse aid dispensed.
Table 1 - Recommended Detergent Amount
Wash Cycle
Hard Water/
Heavy Soil
Medium Water/
Medium Soil
Soft Water/
Little Soil
Heavy 3 tbsp (45 ml) 3 tbsp (45 ml) 1.75-3 tbsp (25-45 ml)
Auto 1.75-3 tbsp (25-45 ml) 1.75 tbsp (25 ml) 1-1.75 tbsp (15-25 ml)
Normal 1.75-3 tbsp (25-45 ml) 1.75 tbsp (25 ml) 1-1.75 tbsp (15-25 ml)
Delicate 1.75 tbsp (25 ml) 1-1.75 tbsp (15-25 ml) 1 tbsp (15 ml)
Express 1.75 tbsp (25 ml) 1-1.75 tbsp (15-25 ml) 1 tbsp (15 ml)
Half Load 1.75 tbsp (25 ml) 1-1.75 tbsp (15-25 ml) 1 tbsp (15 ml)
Rinse & Hold None None None
12
Dishwasher Cycles and Options
Wash Cycles (model dependent)
NOTE: In order to save energy, itis recommended to set the “Auto Power Off” feature to “P:01” (see manual section
titled “Auto Power Off”).
Heavy Wash: Best for cleaning items with baked-on food or grease. These dishes would normally require soaking.
Auto Wash: With our most complex soil sensing capability, this cycle is perfect for use with mixed loads of dish-
ware and varying amounts of food soil. This is the most flexible cycle and is a good choice for everyday use.
Normal:
The Normal cycle is recommended for daily, regular, or typical use to completely wash a full load of
normally soiled dishes.
In order to obtain optimal performance with minimum energy consumption, it is recommended to dis-
able all available features as noted at the start of this section.
NOTE 1: See footnote for additional energy test setup instructions.
Delicate Wash: For delicate or heirloom dishware and silverware or other special items. Always make sure that
the items are dishwasher safe. Refer to the Dishware Materials section on page 6 of this manual for further infor-
mation. Hand washing may be the best treatment for “Not Recommended” items.
Express Wash: Cleans lightly soiled dishes and reduces overall wash time. Use this cycle to clean glasses and
dessert dishware that may need to be reused at the same event.
Half Load: Can reduce the energy and water consumption when washing small, lightly soiled loads that fill
approximately half of the dishwasher’s capacity.
Rinse & Hold: Allows you to rinse food soil off of a partial load and hold them in the dishwasher until you are
ready to run a full load.
Wash Cycle Options
Delay Start: Allows you to delay the start time of your dishwasher by 3, 6, or 9 hours.
Sanitize: The Sanitize feature is available only in the Heavy, Auto, Normal and Half Load cycles. Select one of these
cycles, press the “Sanitize Option” button and then press Start to activate the Sanitation features. The sanitize LED
will light when sanitation requirements are met. The technical sanitation measures may also improve the drying
results.
NOTE: The dishwasher automatically defaults to Auto Wash when turned off and back on. If you used the sanitize option in
your last cycle, the dishwasher will default to Auto Wash with the Sanitize option selected when you turn it on.
NOTE 1: The Energy Guide label was based on the Normal or Regular soil sensing cycle as follows: The unit was tested without any
Rinse Aid (liquid) in the Rinse Aid chamber. A single dose of detergent was inserted into the Detergent Dispenser, with no detergent
being used in the prewash. The unit was not subjected to truncated testing per the definitions in the test procedure. We recommend that
dish loads such as the one in the energy certification test have the rack position set in the highest position.
13
Wash Cycle Information
NOTE: To save energy, this dishwasher has a “Smart Control” where the sensors in the dishwasher automatically adjust
the cycle length, temperature and water changes based on the amount of food soil and the incoming water temperature.
The “Smart Control” makes decisions that can cause the cycle time and water usage to adjust intermittently. Wash cycle
times are based on 120°F water supply. If your household water supply is different than 120°F, your dishwasher’s cycle
times may be impacted.
NOTE: Only sanitizing cycles have been designed to meet the requirements of Section 6 of the NSF/ANSI Standard for Residential
Equipment for soil removal and sanitization efficacy. There is no intention, either directly or indirectly, to imply that all cycles have passed
sanitization performance tests.
Operating the Dishwasher
Start the Dishwasher
1 Press the On/Off button.
2 One of the wash cycle LEDs will be flashing. You can now select a wash cycle.
3 Press the Cycle Select arrow buttons to select the desired wash cycle.
4 Press Start to begin the cycle.
NOTE: Your dishwasher is protected against unintentional operation. If the appliance door remains open for more than 4 seconds after
pressing the [Start/Resume] button, the operation will be paused. Press the [Start/Resume] button again and close the appliance door.
Delay Start
1 Press the On/Off button.
2 Select a cycle.
3 Press and hold the Delay Start button until the desired delay time is shown in the display window or the appropriate
LED is lit (depending on model).
4 Press Start to begin the cycle.
NOTE: Your dishwasher is protected against unintentional operation. If the appliance door remains open for more than 4 seconds after
pressing the [Start/Resume] button, the operation will be paused. Press the [Start/Resume] button again and close the appliance door.
Cancel a Cycle
1 Press and hold Start for 3 seconds.
2 Wait about 1 minute until the display reads “0:00” (models with display) or the “Clean” LED illuminates (models without
display), indicating it is done draining.
3 Press the On/Off button. You may now start a new cycle.
NOTE: Your dishwasher is protected against unintentional operation. If the appliance door remains open for more than 4 seconds after
pressing the [Start/Resume] button, the operation will be paused. Press the [Start/Resume] button again and close the appliance door.
Child Lock
NOTE; Only front-control models have Child Lock.
1
After starting a cycle you can activate the Child Lock.
2 Press and hold the C button until the display reads “CL” (models with display) or the “Child Lock” LED illuminates (mod-
els without
display). NOTE: “CL” disappears from screen when button is released.
3 Child Lock is now active and buttons will not function, except On/Off.
4 To deactivate, press and hold the C button until the “Child Lock” LED turns off or “CL” disappears from the display.
Table 2 - Wash Cycle Information
Heavy Wash Auto Wash Normal Wash Delicate Wash Express Wash Half Load Rinse & Hold
cycle time 110-130 min 115-130 min 130-135 min 80-85 min 30 95-115 mi
n 12 min
cycle time with Sanitize 120-140 min
135-150 min 150-155 min not available not available 1
15-135 min not available
water consumption 20.4-26.6 L
5.4-7 gal
13.8-23.2 L
3.6-6.1 gal
10.9-20.7 L
2.9-5.5 gal
9.9-15.1 L
2.6-4 gal
12.2 L
3.2 gal
10.5-16.3 L
2.8-4.3 gal
4.1 L
1.1 gal
wash temperature 66-71°C
151-160°F
55-66°C
130-150°F
50-55°C
122-131°F
45-50°C
113-122°F
48°C
118°F
52°C
126°F
not available
rinse temperature 72°C
162°F
68-72°C
154-162°F
67-70°C
153-158°F
62°C
144°F
55°C
131°F
68-72°C
154-162°F
incoming
14
For Models with Display
To enter options mode:
1 Press the On/Off button to turn the unit on.
2 The countdown display and one of the wash cycle LEDs will be flashing.
3 Press and hold down the > button, then simultaneously press and release the Start button. Now release the > button.
4 The “Sanitized” LED will be flashing. You are now in options mode.
5 Press the > button to select the option you would like to adjust.
To set amount of Rinse Aid:
NOTE: If your glasses have spots on them, you need more rinse aid. If your glasses have streaks on them, you need less rinse aid.
1 Follow the above instructions to enter options mode.
2 With the display showing “r:00” - “r:06” press the < button to change the amount of rinse aid dispensed.
r:00 = rinse aid is OFF
r:03 = medium amount of rinse aid dispensed
r:06 = highest amount of rinse aid dispensed
3 Press Start to save your setting.
To turn Extra Dry Heat ON or OFF:
1 Follow the above instructions to enter options mode.
2 With the display showing “d:00” or “d:01” press the < button to turn Extra Dry Heat ON or OFF.
d:00 = Extra Dry Heat is OFF
d:01 = Extra Dry Heat is ON
3 Press Start to save your setting.
Auto Power Off
NOTE: Setting can only be changed for models with a display. For models without a display, the default setting is P:00
To save energy, the dishwasher is turned off 1 minute after the wash cycle ends. This setting can be adjusted from P:00 to P:02.
To change the setting:
1 Open the door and press the [On/Off] button.
2 Hold down the “A” button (see page 17)and press [Start] until the display indicates “d:0x” (x can be any number). Release both buttons.
3 Press the “A” button until the display indicates “P:0x”.
4 Press the “C” button until the display corresponds with your requirements.
P:00 = dishwasher does not turn off automatically
P:01 = dishwasher turns off automatically after 1 minute
P:02 = dishwasher turns off automatically after 120 minutes (2 hours)
5 Press [Start] to save the setting.
For Models without Display
To enter options mode:
1 Press the On/Off button to turn the unit on. For models with the buttons on top, the door must be open. For models with the buttons on the
front, the door mustbe closed.
2 One of the wash cycle LEDs will be flashing.
3 Press and hold down the > button, then simultaneously press and release the Start
button. Now release the > button.
4 The “Clean” and one other LED (varies by model) will be flashing. You are now in options mode.
5 Press the > button to select the option you would like to adjust.
To set amount of Rinse Aid:
NOTE: If your glasses have spots on them, you need more rinse aid. If your glasses have streaks on them, you need less rinse aid.
1 Follow the above instructions to enter options mode.
2
With the “Clean” and “Rinse Aid” LEDs flashing, press the
<
button to change the amount of rinse aid dispensed. The “Clean” and “Rinse Aid” LEDs keep
flashing and:
0 wash cycle LEDs on = rinse aid is OFF
1 wash cycle LED on = lowest amount of rinse aid dispensed
2 wash cycle LEDs on = medium amount of rinse aid dispensed
3 wash cycle LEDs on = highest amount of rinse aid dispensed
3 Press Start to save your setting.
To turn Extra Dry Heat ON or OFF:
1 Follow the above instructions to enter options mode.
2 With the “Clean” and “Sanitized” LEDs flashing, press the < button to turn Extra Dry Heat ON or OFF. The “Clean” and “Sanitized” LEDs keep flash-
ing and:
0 wash cycle LEDs on = Extra Dry Heat is OFF
1 wash cycle LED on = Extra Dry Heat is ON
3 Press Start to save your setting.
15
Care and Maintenance
Maintenance Tasks
Certain areas of the dishwasher require occasional maintenance. The maintenance tasks are easy to do and will
ensure continued superior performance from your dishwasher.
Wiping up Spills and Splash-outs
Water may occasionally splash out of your dishwasher, particularly if you interrupt a cycle or open the dishwasher
door during a cycle. To avoid floor damage and possibly mold growth, do not allow wet areas to remain around or
under the dishwasher.
Clean the Stainless Steel Inner Door and Tub
Clean the outer edges of the inside door panel regularly to remove debris that may collect from normal loading. If
spots begin to appear on the stainless steel, make sure the rinse agent is full and functioning properly.
Check and Clean Spray Arm Nozzles
Remove the upper spray arm by first removing the empty upper rack from the dish-
washer. Turn the rack upside down. The upper spray arm is held in position by a locking
nut as shown in Figure 8. Turn the locking nut counterclockwise and remove it to release
the spray arm. Look for obstruction in the spray nozzles. If the spray nozzles need clean-
ing, flush them under running water.
To reinstall the upper spray arm, place it back in position and return the locking nut to
its install position. Turn the locking nut clockwise to secure. Return the upper rack to
the upper rack roller guides.
Remove the lower spray arm by first removing the empty lower rack from the dish-
washer. Grasp and lift the spray arm as shown in Figure 9. Look for obstruction in the
spray nozzles. If the spray nozzles need cleaning, flush them under running water.
To reinstall the lower spray arm, return the lower spray arm to the installed position and
press it until it snaps into place. Return the lower rack to the installed position.
Check and Clean the Filter System
The filter system consists of a Large Object Trap, Fine Filter and a Micro Filter.
The filter system is located on the inside of your dishwasher under the lower rack and is
easily accessible. During normal use, the filter system is self-cleaning. You should occa-
sionally inspect it for foreign objects and clean it when necessary.
WARNINGWARNIN
To remove the Large Object Trap, remove the lower rack. Grasp the assembly
and turn it counterclockwise as shown in Figure 10. Lift the assembly out.
Carefully examine the assembly. If you find debris in the Large Object Trap, turn it
upside-down and gently tap it on a flat surface to dislodge and remove debris.
Flush the Micro Filter clean by holding it under running water.
To reinstall the filter system, return the fine filter to the installed position. Turn the
locking nut clockwise until it is locked. The arrow on the ring handle and the arrow
on the Fine Filter should point at each other.
9WARNING
Use caution when removing parts for cleaning as some debris may
be sharp.
Figure 8
Figure 9
Fine
Filter
Trap
Micro
Filter
Large Object
Figure 10
G
16
Clean the Exterior Door Panel
Colored doors: use only a soft cloth dampened with soapy water.
Stainless steel doors: use a soft cloth with a non-abrasive cleaner (preferably a liquid spray) made for cleaning
stainless steel. For the best results, apply the stainless steel cleaner to the cloth and then wipe the surface.
Clean the Door Gasket
Regularly clean the door gasket with a damp cloth to remove food particles and other debris. Also clean the door
seal, located inside the dishwasher at the bottom of the door.
.
Preparing your Dishwasher for Vacation
Before leaving for vacation during warmer weather, besides turning off the main valve, also turn off wa-
ter supply at the nearest point to the dishwasher. During colder weather, please follow the instructions
for winterizing your unit below.
.
Winterizing your Dishwasher
If your dishwasher will be unused for an extended period of time in a location that experiences freezing
temperatures (holiday home or through a vacation period), have your dishwasher winterized by a pro-
fessional servicer.
Troubleshooting
Dishwashers may occasionally exhibit problems that are unrelated to a malfunction of the dishwasher itself. The
following information may help you with a dishwasher problem without involving a repair professional.
NOTICE
NOTICE
Problem Cause Action
Cycle does not
resume after
door is opened
and closed dur-
ing cycle.
1. Door is opened longer than 4 seconds
after a cycle has started.
1. Press [START/RESUME] button again to resume cycle.
Self-latching
door not clos-
ing properly
1. Self-latching feature will not work prop-
erly if dishwasher is not installed correctly.
1. Ensure the alignment of the dishwasher frame is accu-
rate and level.
Dishwasher
does not start
1. Door may not be properly latched.
2. Unit may not be turned on.
3. Unit not reset or previous cycle not com-
pleted.
4. Delay start engaged.
5. Interruption of electrical power supply to
dishwasher or blown fuse.
6. The door may have been closed without
first selecting a cycle.
7. Water supply may not be turned on.
1. Shut the door completely until you hear a click.
2. Press the main power switch to turn unit on.
3. To reset, refer to “Cancel a Cycle”
section
of this manual.
4. To reset, refer to “Delay Start” section of this manual.
5. Check circuit breaker.
6. Select a cycle and close the door.
7. Check and turn on water supply.
Display does
not illuminate
or console
lights are not
on
1. A fuse may have been blown or circuit breaker
tripped.
2. Door not closed or latched.
NOTE: For models with controls on top of the
door, the display only illuminate when the door
is opened and controls are visible.
1. Check the fuse or circuit breaker box and replace the
fuse or reset the breaker if necessary.
2. Ensure door is properly latched and completely closed
until you hear it click.
117
Dishwasher
seems to run a
long time
1. Incoming water is not warm enough.
2. Cycle time can vary due to soil and water con-
ditions.
3. Rinse agent dispenser is empty.
4. Dishwasher connected to cold water sup-
ply.
NOTE: Refer to “Wash Cycle Information” sec-
tion of this manual for typical cycle lengths.
1. Before starting a cycle, run hot water faucet at the sink
closest to the dishwasher.
2. Sensors in the dishwasher automatically increase the
cycle time to ensure a good wash when heavy soil is
detected.
3. Add rinse agent.
4. Verify dishwasher is connected to hot water supply
plumbing.
Dishes are not
getting clean
enough
1. Spray arm movement obstructed.
2. Spray arm nozzles clogged.
3. Improper use of detergents.
4. Filters could be clogged.
5. Dishes are nested or loaded too close
together.
6. Selected wash cycle is not suitable for
food soil conditions.
1. Ensure that spray arm movement is not blocked by
hand rotating spray arms before starting cycle.
2. Remove the spray arms and clean according to the
“Care and Maintenance” section of the manual.
3. Increase or decrease detergent depending on the water
hardness (refer to Table 1).
4. Clean the filters according to the “Care and Mainte-
nance” section of the manual.
5. Rearrange load such that water spray can reach all
items in the dishwasher - see “Loading the Dishwasher”
section of the manual.
6. Refer to “Wash Cycle Information” section of the manual.
Dishes are not
getting dry
enough
1. Rinse agent dispenser is empty.
2. Improper loading of dishes.
3. Selected cycle does not include drying.
4. Extra Dry Heat is not activated.
NOTE: Plastic or Teflon do not typically dry as
well as other items due to their inherent prop-
erties.
1. Add rinse agent - the use of rinse agent improves dry-
ing.
2. Rearrange load to ensure items are not nesting (see
“Loading the Dishwasher” section of the manual).
3. Rinse and Hold setting does not include drying.
4. See the “Operating the Dishwasher” section of this
manual to learn how to activate Extra Dry Heat.
Odor
Note: Water
testing is done in
the factory.
Occasionally
water may still
appear in the
dishwasher at
purchase which
may create an
odor.
1. Food debris is present at the bottom of
the dishwasher.
2. Food particles are present near the door
seal.
3. Dishes left in unit too long before running a
cycle.
4. Residual water is present at the bottom
of the dishwasher.
5. Drain hose is obstructed.
1. Remove the filters and clean according to the “Care
and Maintenance” section of the manual.
2. Refer to “Care and Maintenance” section of the manual.
3. Run a Rinse and Hold cycle if you do not intend to
immediately wash the dishes.
4. Ensure the unit has completely drained from the last
cycle.
5. Remove any obstructions from the drain hose by calling
qualified personnel.
NOTE: If odor still persists, run the Normal/Regular cycle until
it flushes and interrupt the cycle and place an 8 oz. cup of dis-
tilled white vinegar solution on the upper rack and then finish
the cycle.
Dishwasher not
filling with
water
1. Restriction in the water supply system.
2. Previous wash cycle was not completed.
3. Delay start is active.
4. Household water supply turned off.
1. Ensure that the water supply valve (typically located
under kitchen sink) is open and check that the water sup-
ply line has no kinks or clogs.
2. Refer to the “Operating the Dishwasher” section of the
manual.
3. Cancel the delay start or wait until delay start time
completes.
4. Turn household water supply on.
Water leaks 1. Suds.
2. Door seal could be pulled away from
track.
3. Condensation vent is blocked.
4. Improper installation.
1. Wrong type of detergent results in suds and leaks - use
only dishwasher detergents. If suds still persist, add one
tablespoon of vegetable oil at the bottom of the dish-
washer and run the desired cycle.
2. Ensure the door seal is in the track.
3. Ensure that condensation vent is not blocked.
4. Have proper installation verified by qualified personnel
(water supply, drain system, leveling, plumbing).
Problem Cause Action
18
Customer Service
Your Bosch® dishwasher requires no special care other than that described in the Care and Maintenance section of this
manual. If you are having a problem with your dishwasher, before calling for service please refer to the Self Help section
of the manual. If service is necessary, contact your dealer or installer or an authorized service center. Do not attempt to
repair the appliance yourself. Any work performed by unauthorized personnel may void the warranty.
If you are having a problem with your Bosch® dishwasher and are not pleased with the service you have received,
please take the following steps until the problem is corrected to your satisfaction:
1 Call us at 1-800-944-2904
2 Contact Customer Service from our web site: www.bosch-home.com/us or www.bosch-appliances.ca
3 Contact your installer or the Bosch® Authorized Service Contractor in your area.
4 Write us: http://www.bosch-home.com/us/customer-support/contact-us.html
Please be sure to include your model information as well as an explanation of the problem and the date it started.
You will find the model and serial number information on the label located on the edge of the dishwasher door.
Please make a copy of your invoice and keep it with this manual. The customer must show proof of purchase to
obtain warranty service.
Tub stains 1. Stains on the dishwasher interior are due to
water hardness.
2. Silverware in contact with tub.
1. Concentrated lemon juice can reduce the build up of
hard water stains. Run a Regular cycle until it flushes and
interrupt the cycle and then place an 8 oz. cup of the con-
centrated lemon solution on the upper rack and finish the
cycle. this can be done periodically to avoid build up.
2. Ensure that silverware does not make contact with the
tub while running a cycle.
Streaks on
glassware or
residue on the
dishes
1. Incorrect rinse agent setting. 1. Depending on the hardness of water, adjust the rinse
agent dispenser. Refer to “Operating the Dishwasher”
section of the manual.
Fascia panel
discolored or
marked
1. Abrasive cleaner used. 1. Use mild detergents with soft damp cloth.
Noise during
wash cycle
1. Dishes may not be arranged properly.
1. Water circulation sound is normal, but if you suspect items
are banging into each other or into the spray arms, refer to the
“Loading the Dishwasher” section on page 6-7 of the manual
for optimal arrangement.
Detergent dis-
penser cover
will not shut
1. Improper operation of detergent cover.
2. Previous cycle has not been finished or
rest or cycle or interrupted.
1. Refer to “Adding Detergent and Rinse Agent” section on
page 9-10 of the manual for instructions on opening and
closing the dispenser.
2. Refer to the “Operating the Dishwasher” section of the
manual.
Unable to
select desired
cycle
1. Previous cycle has not finished. 1. Refer to the “Operating the Dishwasher” section of the
manual.
Problem Cause Action
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Bosch SHE3AR72UC/22 Manuel utilisateur

Catégorie
Lave-vaisselle
Taper
Manuel utilisateur

dans d''autres langues