Bosch SHE3ARB5UC/01 Manuel utilisateur

Marque: Bosch

Modèle: SHE3ARB5UC/01

Catégorie: Lave-vaisselle

Taper: Manuel utilisateur

Dishwasher

en Operating instructions

Guide d’Utilisation fr

Lave-Vaisselle

9001124245 (9511)

Dear Valued Customer,

Thank you for selecting a Bosch® dishwasher. You have joined the many

consumers who demand quiet and superior performance from their

dishwashers.

This manual was written with your safety and convenience in mind, and the

information contained herein is very important. We highly recommend that you

read this manual before using your dishwasher for the first time.

To learn more about your dishwasher and available accessories, as well as many

other top quality Bosch® appliances, visit our web site at:

www.bosch-home.com/us (USA)

www.bosch-home.ca (Canada)

While there, don’t forget to register your new dishwasher by clicking on the

“Support” tab or filling out the product registration card enclosed with your

new unit.

If you have any questions or comments, please contact us by phone at:

1-800-944-2904

or write us at:

BSH Home Appliances Corporation

1901 Main Street, Suite 600

Irvine, CA 92614

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS...................................................................... 2

Dishwasher Components ..........................................................................................4

Dishwasher Features ................................................................................................5

Loading the Dishwasher ...........................................................................................6

Loading the Silverware Basket ................................................................................8

Rack Accessories ....................................................................................................10

Adding Detergent and Rinse Agent .......................................................................10

Dishwasher Cycles and Options ............................................................................12

Wash Cycle Information .........................................................................................13

Operating the Dishwasher .....................................................................................13

Care and Maintenance ...........................................................................................15

Troubleshooting .....................................................................................................16

Customer Service ...................................................................................................18

Warranty Information .............................................................................................20

9 IMPORTANT SAFETY INSTRUCTIONS:

Please READ and SAVE this information

Misuse of the dishwasher can result in serious injury or death. Do not use the dishwasher in any way

not covered in this manual or for any purpose other than those explained in the following pages.



Severe product damage and/or injury could result from the use of unqualified service technicians or

non-original replacement parts. All repairs must be performed by a qualified service technician using

only original equipment factory replacement parts.



Electrical shock or fire could result if the electrical supply for the dishwasher covered in this manual is

incorrectly installed or if the dishwasher has been improperly grounded. Do not use the dishwasher

covered in this manual unless you are certain the electrical supply has been correctly installed and the

dishwasher has been properly grounded.



Never use harsh chemicals to clean your dishwasher. Some chloride-containing products can damage

your dishwasher and may present health hazards!



To avoid risk of injury (burn), always use caution when opening the door during or following a wash

cycle as hot water or steam may escape. Do not fully open the door until water noises have stopped

and steam has subsided..

Never use steam cleaning products to clean your dishwasher. The manufacturer will not be responsible

for the possible damages or consequences.



It is highly recommended for the end user to become familiar with the procedure to shut off the incom-

ing water supply and the procedure to shut off the incoming power supply. See the Installation Instruc-

tions or contact your installer for more information.



To avoid possible dishwasher damage, do not use harsh chemicals, abrasive cleaners, scouring pads

(metal or plastic), or abrasive cloths/paper towels to clean your dishwasher’s exterior door panel.

Your dishwasher's exterior door panel can be damaged by doing so.



NSF/ANSI 184 Certified residential dishwashers are not intended for licensed food establishments.

9WARNING

NOTICE

WARNING: To reduce the risk of fire, electrical

shock, or serious injury, observe the following:

1 This dishwasher is provided with Installation Instructions and this Use and Care Manual

(operating instructions). Read and understand all instructions before using the dish-

washer.

2 This appliance must be grounded to a metal, permanent wiring system, or an equipment

grounding conductor must be run with the circuit conductors and connected to the equip-

ment grounding terminal or lead on the dishwasher. See the Installation Instructions

included with this dishwasher for more information on electrical requirements.

3 Use this dishwasher only for its intended function, which is the washing of household dish-

ware and kitchenware rated as dishwasher safe.

4 Use only detergents or rinsing agents recommended for use in a dishwasher, and keep

them out of the reach of children.

5 When loading items to be washed:

• Locate sharp items so they are not likely to damage the door seal.

• Load knives and other sharp utensils with their HANDLES UP to reduce the risk of

cut-type injuries.

• Do not wash plastic items unless they are marked “dishwasher safe” or the

equivalent. For plastic items not so marked, check the manufacturer’s recom-

mendations.

• Do not operate your dishwasher unless all enclosure panels are in place.

• Do not tamper with or override controls and interlocks.

6 Do not abuse, sit or stand on the door or dish racks of the dishwasher.

7 To reduce risk of injury, do not allow children to play in or on the dishwasher.

8 When children become old enough to operate the appliance, it is the responsibility of the

parents/legal guardians to ensure the children are instructed in safe practices by qualified

persons.

9 Under certain conditions, hydrogen gas may be produced in a hot water system that has

not been used for two weeks or more. Hydrogen gas is explosive. Before using a dish-

washer that is connected to a hot water system that has been unused for two weeks or

longer, turn on all hot water faucets and let the water flow from each for several minutes.

This will release any accumulated hydrogen gas. As the gas is explosive, do not smoke or

use an open flame during this time.

10 Remove the dishwasher door to the washing compartment when removing an old dish-

washer for service or discarding.

11 To avoid floor damage and possible mold growth, do not allow wet areas to remain around

or under the dishwasher.

12 Protect your dishwasher from the elements. Protect against freezing to avoid possible

damage to the fill valve. Damage caused by freezing is not covered by the warranty.

This appliance must be grounded. In the event of a malfunction or breakdown, grounding

will reduce the risk of electric shock by providing a path of least resistance for electric cur-

rent. This appliance is equipped with a cord having an equipment-grounding conductor.

• Improper connection of the equipment-grounding conductor can result in risk

of electric shock. Check with a qualified electrician or service representative if

you are in doubt whether the appliance is properly grounded.

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to

cause cancer, birth defects, or other reproductive harm.

Dishwasher Components

* “#” can be any number

SHE3AR7#UC*/SHE3ARB#UC*

SHE3ARF#UC*

SHX3AR7#UC*

* “#” can be any number

Wash Cycles Additional Features

Model

Heavy

Wash

Auto

Wash

Normal

Wash

Delicate

Wash

Express

Wash

Half

Load

Rinse &

Hold

Adjustable

Upper Rack

Child

Lock

Delay

Start

Flip

Tines

Sanitize

Option

Silverware

Basket

SHE3AR7#UC*

SHE3ARB#UC*

XXX X XX X XXXXLong

SHE3ARF#UC* X X X X X X X X X X X Double-

Flex

™

SHX3AR7#UC* X X X X X X X X X X Double-

Flex

™

Start

Resume

Reset 3 sec.

Start

Resume

Reset 3 sec.

Rinse

& Hold

Start

Resume

Reset 3 sec.

Dishwasher Features

Self-Latching Door: The self-latching feature will hold the door wherever you place it and then automatically latch when open

20 degrees or less.

Delay Start: Delays the start time of your dishwasher by 3, 6, or 9 hours.

EcoSense Wash Management System:

Checks water condition and decides if a second fresh water fill is necessary.

Extra Dry Heat: Raises the temperature of the rinse and increases the drying time resulting in improved drying.

Flow-Through Heater™: Quickly and efficiently heats water to a sanitizing temperature.

Noise Reduction System: Uses Suspension Motor™, a two-pump motor system, and insulation to make this dish-

washer part of the quietest dishwasher line in North America.

Nylon Coated Racks: Eliminates cuts and nicks and have a five year warranty.

OptiDry®: This feature senses when the unit is low on rinse agent and automatically increases the drying time.

Sanitize: An option to meet sanitized conditions and improve drying results. This option can only be used with cer-

tain wash cycles. See page 12.

Triple Filtration System: Uses multiple filters to ensure distribution of clean water and protect the main pump

and the drain pump from foreign material.

Model dependent features:

Adjustable Rack:

The upper rack can be raised or lowered manually to accommodate tall items in the upper

and lower racks.

Flip Tines: Increase the rack flexibility to accommodate larger/taller items.

Upper rack

Vent

Lower rack

Detergent dispenser

Rinse aid dispenser

Upper rack spray arm

Lower rack spray arm

Silverware basket

Filter system

Dishware Materials

NOTE: Before using your dishwasher for the first time, check the information in this section. Some items are not dish-

washer safe and should be hand washed; others require special loading.

Recommended:

Aluminum: Colored anodized aluminum may fade over time. Minerals in your water may cause the aluminum to

darken or spot. This can usually be removed with a soap-filled steel wool pad.

China, Crystal, Stoneware: Some hand-painted utensils may discolor, fade or spot. Hand wash these utensils.

Position fragile glassware so that it will not topple over or come in contact with other utensils during the wash

cycle.

Glass: Milk glasses may discolor or become yellow.

Non-stick Coatings: Apply a light coating of vegetable oil to non-stick surfaces after drying.

Plastics: Make sure the plasticware is dishwasher safe.

Stainless Steel, Sterling Silver and Silver Plates: Load these so they do not come in contact with other metals.

Not Recommended:

Acrylic: Crazing or small cracks throughout the acrylic, may occur.

Adhesive-Joined Pieces: Adhesives that join materials such as plastic, wood, bone, steel copper, tin, etc. may

loosen.

Bone-Handled Utensils: Handles may separate.

Iron: Iron will rust. Hand wash and dry immediately.

Non-Dishware Items: Your dishwasher is intended for use in cleaning ONLY standard household dishware and kitchen-

ware.

Pewter, Brass, Bronze: These items will tarnish. Hand wash and dry immediately.

Tin: Tin will stain. Hand wash and dry immediately.

Wood: Wooden bowls, wooden utensils and utensils with wooden handles can crack, warp and lose their finish.

Loading the Dishwasher

Do not pre-wash items with loosely attached soiling. Remove all food particles, bones, toothpicks and excessive

grease. Items having burned-on, baked-on or starchy soils may require some pretreatment. Refer to the Dishware

Materials section for more information about dishware suitability.

Load only dishwasher safe items into the dishwasher. Load dishes in the dishwasher racks so the insides of

bowls, pots and pans are facing the spray arms. Avoid nesting and contact points between dishes. Separate

items of dissimilar metals.

WARNING

The sharp points and edges of knives and other sharp utensils can cause serious injuries. Load knives and other

sharp utensils with edges down. Do not allow children to handle or play near knives and sharp utensils.

NOTICE

To avoid dishwasher damage, do not load the dishwasher with paper products, plastic bags, packing materials or

anything other than normal, dishwasher safe dishware and kitchenware.

Loading the Upper Rack

Ensure items do not protrude through the bottom of the racks and block the spray arms.

NOTE: When pushing the upper rack into the dishwasher, push it until it stops against the back of the tub so the upper rack

spray arm connects to the water supply at the back of the tub. Do not push racks in using the door.

Loading the Lower Rack

Place large items in the lower rack. Load pots, pans and bowls upside down. Do not block vent with tall baking

sheets. Load these items on the left side of the dishwasher.

Unloading the Dishwasher

When unloading the dishwasher it is best to unload the lower rack first. Next, unload the silverware basket fol-

lowed by the upper rack.

Lower Rack

Additional Loading Pattern

Upper Rack

Suggested Loading Pattern

Lower Rack

Loading the Silverware Basket

Place knives and sharp utensils with their HANDLES UP and forks and spoons with their handles down. If large or

oddly-shaped items are loaded in the silverware basket, be sure they do not nest together.

WARNING

The sharp points and edges of knives and other sharp utensils can cause serious injury. Load knives and other

sharp utensils with edges down. Do not allow children to handle or play near knives and sharp utensils.

The Double-Flex™ Silverware Basket (select models)

This basket splits along its length, resulting in two halves that may

be placed in a variety of positions in the lower rack, greatly increas-

ing the lower rack’s loading versatility. The basket snaps together

either back to back or end to end as shown.

To split the Double-Flex™ Silverware Basket

Grasp the basket and slide the two halves in opposite directions as

shown at right and then pull the two halves apart.

Double-Flex™ Basket Placement Options

The Long Silverware Basket (select models)

The long silverware basket fits along the side of the lower rack.

Long Basket Placement Option

The basket lid may also be snapped to the handle in order to leave the basket open.

Loading pattern for Long Silverware Basket

Loading pattern for Double-Flex™ Silverware Basket

12345

1- salad fork

2- teaspoon

3- dinner fork

4- knife

5 - tablespoon

6 - serving spoon

7 - serving fork

4 4 4 4 4

3 3 3 3 3

1 1

1 1 1 1

2 2 2

Lft id LONG il b k t

2 2 2

2 2

7 4

Figure 1

Figure 2

Figure 3

Rack Accessories

Flip Tines (model dependent)

The racks consist of tines that can be folded down depending on what you may need

to load in the rack. To fold down, grasp the folding tine and release from notch. Push

folding tine downward to desired position as shown in Figure 1.

Adjustable Upper Rack (model dependent)

Remove the empty upper rack by pulling it out of the dishwasher until it can be lifted

upward as show in Figure 2. Pull the rack up and out until the rollers are completely

free of the roller guides.

Re-insert the rack with the other set of rollers on the roller guides as shown in

Figure 3

Adding Detergent and Rinse Agent

Detergent

Use only detergent specifically designed for dishwashers. For best results, use fresh powdered dishwashing

detergent or detergent tabs.

NOTICE

To avoid dishwasher damage, do not use hand dishwashing products in your dishwasher.

To avoid dishwasher damage, do not use too much detergent if your water is soft. Using too much detergent with

soft water may cause etching in glassware.

This dishwasher uses less water than most, therefore, less detergent is required. With soft water, 1 tablespoon

(15 ml) of detergent will clean most loads. The detergent dispenser cup has lines that measure detergent to 1

tablespoon (15 ml) and 1.75 tablespoons (25 ml). 3 tablespoons (45 ml) of detergent will completely fill the

detergent dispenser.

NOTE: If you do not know the hardness of your water supply, use 15ml of detergent. Increase the amount if necessary to

the least amount required to get your kitchenware clean.

Use the measuring lines in the detergent dispenser cup as a guide to measure the amount of detergent recom-

mended in Table 1 on page 11.

Figure 5

Figure 4

Figure 6

Figure 7

Adding Detergent

• 1 tablespoon (15ml) will clean most loads (see Figure 4).

• Do not use more than 3 tablespoons (45ml).

• Do not over fill the detergent dispenser.

• When using detergent tabs, lay them flat to avoid contact with the cover.

To Close

• Place finger as shown in Figure 5.

• Slide door closed and press down firmly until it clicks.

To Open

• To open the cover, push the button as shown in Figure 6.

• Cover will slide open.

Rinse Aid

To achieve proper drying, always use a liquid rinse aid, even if your deter-

gent contains a rinse aid or drying additive.

NOTE: The dishwasher indicates low rinse aid by turning on the “Refill Rinse Aid”

LED in the display. If this light is on, you need to refill the rinse aid dispenser by fol-

lowing the directions below.

Adding Rinse Aid

NOTICE

To avoid oversudsing or clogging, do not overfill the rinse aid dispenser.

Wipe up any spills with a damp cloth.

1 Add liquid rinse aid to the dispenser until it is full (see Figure 7). Do not overfill.

2 Close the lid. Lid must be fully closed until it clicks in order to seal.

Wipe up any excess rinse aid that may have puddled when the dispenser reservoir is full.

The indicator light will go out a few moments after the dishwasher door is shut. See page 14 for instructions on

how to adjust the amount of rinse aid dispensed.

Table 1 - Recommended Detergent Amount

Wash Cycle

Hard Water/

Heavy Soil

Medium Water/

Medium Soil

Soft Water/

Little Soil

Heavy 3 tbsp (45 ml) 3 tbsp (45 ml) 1.75-3 tbsp (25-45 ml)

Auto 1.75-3 tbsp (25-45 ml) 1.75 tbsp (25 ml) 1-1.75 tbsp (15-25 ml)

Normal 1.75-3 tbsp (25-45 ml) 1.75 tbsp (25 ml) 1-1.75 tbsp (15-25 ml)

Delicate 1.75 tbsp (25 ml) 1-1.75 tbsp (15-25 ml) 1 tbsp (15 ml)

Express 1.75 tbsp (25 ml) 1-1.75 tbsp (15-25 ml) 1 tbsp (15 ml)

Half Load 1.75 tbsp (25 ml) 1-1.75 tbsp (15-25 ml) 1 tbsp (15 ml)

Rinse & Hold None None None

Dishwasher Cycles and Options

Wash Cycles (model dependent)

NOTE: In order to save energy, itis recommended to set the “Auto Power Off” feature to “P:01” (see manual section

titled “Auto Power Off”).

Heavy Wash: Best for cleaning items with baked-on food or grease. These dishes would normally require soaking.

Auto Wash: With our most complex soil sensing capability, this cycle is perfect for use with mixed loads of dish-

ware and varying amounts of food soil. This is the most flexible cycle and is a good choice for everyday use.

Normal:

The Normal cycle is recommended for daily, regular, or typical use to completely wash a full load of

normally soiled dishes.

In order to obtain optimal performance with minimum energy consumption, it is recommended to dis-

able all available features as noted at the start of this section.

NOTE 1: See footnote for additional energy test setup instructions.

Delicate Wash: For delicate or heirloom dishware and silverware or other special items. Always make sure that

the items are dishwasher safe. Refer to the Dishware Materials section on page 6 of this manual for further infor-

mation. Hand washing may be the best treatment for “Not Recommended” items.

Express Wash: Cleans lightly soiled dishes and reduces overall wash time. Use this cycle to clean glasses and

dessert dishware that may need to be reused at the same event.

Half Load: Can reduce the energy and water consumption when washing small, lightly soiled loads that fill

approximately half of the dishwasher’s capacity.

Rinse & Hold: Allows you to rinse food soil off of a partial load and hold them in the dishwasher until you are

ready to run a full load.

Wash Cycle Options

Delay Start: Allows you to delay the start time of your dishwasher by 3, 6, or 9 hours.

Sanitize: The Sanitize feature is available only in the Heavy, Auto, Normal and Half Load cycles. Select one of these

cycles, press the “Sanitize Option” button and then press Start to activate the Sanitation features. The sanitize LED

will light when sanitation requirements are met. The technical sanitation measures may also improve the drying

results.

NOTE: The dishwasher automatically defaults to Auto Wash when turned off and back on. If you used the sanitize option in

your last cycle, the dishwasher will default to Auto Wash with the Sanitize option selected when you turn it on.

NOTE 1: The Energy Guide label was based on the Normal or Regular soil sensing cycle as follows: The unit was tested without any

Rinse Aid (liquid) in the Rinse Aid chamber. A single dose of detergent was inserted into the Detergent Dispenser, with no detergent

being used in the prewash. The unit was not subjected to truncated testing per the definitions in the test procedure. We recommend that

dish loads such as the one in the energy certification test have the rack position set in the highest position.

Wash Cycle Information

NOTE: To save energy, this dishwasher has a “Smart Control” where the sensors in the dishwasher automatically adjust

the cycle length, temperature and water changes based on the amount of food soil and the incoming water temperature.

The “Smart Control” makes decisions that can cause the cycle time and water usage to adjust intermittently. Wash cycle

times are based on 120°F water supply. If your household water supply is different than 120°F, your dishwasher’s cycle

times may be impacted.

NOTE: Only sanitizing cycles have been designed to meet the requirements of Section 6 of the NSF/ANSI Standard for Residential

Equipment for soil removal and sanitization efficacy. There is no intention, either directly or indirectly, to imply that all cycles have passed

sanitization performance tests.

Operating the Dishwasher

Start the Dishwasher

1 Press the On/Off button.

2 One of the wash cycle LEDs will be flashing. You can now select a wash cycle.

3 Press the Cycle Select arrow buttons to select the desired wash cycle.

4 Press Start to begin the cycle.

NOTE: Your dishwasher is protected against unintentional operation. If the appliance door remains open for more than 4 seconds after

pressing the [Start/Resume] button, the operation will be paused. Press the [Start/Resume] button again and close the appliance door.

Delay Start

1 Press the On/Off button.

2 Select a cycle.

3 Press and hold the Delay Start button until the desired delay time is shown in the display window or the appropriate

LED is lit (depending on model).

4 Press Start to begin the cycle.

NOTE: Your dishwasher is protected against unintentional operation. If the appliance door remains open for more than 4 seconds after

pressing the [Start/Resume] button, the operation will be paused. Press the [Start/Resume] button again and close the appliance door.

Cancel a Cycle

1 Press and hold Start for 3 seconds.

2 Wait about 1 minute until the display reads “0:00” (models with display) or the “Clean” LED illuminates (models without

display), indicating it is done draining.

3 Press the On/Off button. You may now start a new cycle.

NOTE: Your dishwasher is protected against unintentional operation. If the appliance door remains open for more than 4 seconds after

pressing the [Start/Resume] button, the operation will be paused. Press the [Start/Resume] button again and close the appliance door.

Child Lock

NOTE; Only front-control models have Child Lock.

After starting a cycle you can activate the Child Lock.

2 Press and hold the C button until the display reads “CL” (models with display) or the “Child Lock” LED illuminates (mod-

els without

display). NOTE: “CL” disappears from screen when button is released.

3 Child Lock is now active and buttons will not function, except On/Off.

4 To deactivate, press and hold the C button until the “Child Lock” LED turns off or “CL” disappears from the display.

Table 2 - Wash Cycle Information

Heavy Wash Auto Wash Normal Wash Delicate Wash Express Wash Half Load Rinse & Hold

cycle time 110-130 min 115-130 min 130-135 min 80-85 min 30 95-115 mi

n 12 min

cycle time with Sanitize 120-140 min

135-150 min 150-155 min not available not available 1

15-135 min not available

water consumption 20.4-26.6 L

5.4-7 gal

13.8-23.2 L

3.6-6.1 gal

10.9-20.7 L

2.9-5.5 gal

9.9-15.1 L

2.6-4 gal

12.2 L

3.2 gal

10.5-16.3 L

2.8-4.3 gal

4.1 L

1.1 gal

wash temperature 66-71°C

151-160°F

55-66°C

130-150°F

50-55°C

122-131°F

45-50°C

113-122°F

48°C

118°F

52°C

126°F

not available

rinse temperature 72°C

162°F

68-72°C

154-162°F

67-70°C

153-158°F

62°C

144°F

55°C

131°F

68-72°C

154-162°F

incoming

For Models with Display

To enter options mode:

1 Press the On/Off button to turn the unit on.

2 The countdown display and one of the wash cycle LEDs will be flashing.

3 Press and hold down the > button, then simultaneously press and release the Start button. Now release the > button.

4 The “Sanitized” LED will be flashing. You are now in options mode.

5 Press the > button to select the option you would like to adjust.

To set amount of Rinse Aid:

NOTE: If your glasses have spots on them, you need more rinse aid. If your glasses have streaks on them, you need less rinse aid.

1 Follow the above instructions to enter options mode.

2 With the display showing “r:00” - “r:06” press the < button to change the amount of rinse aid dispensed.

r:00 = rinse aid is OFF

r:03 = medium amount of rinse aid dispensed

r:06 = highest amount of rinse aid dispensed

3 Press Start to save your setting.

To turn Extra Dry Heat ON or OFF:

1 Follow the above instructions to enter options mode.

2 With the display showing “d:00” or “d:01” press the < button to turn Extra Dry Heat ON or OFF.

d:00 = Extra Dry Heat is OFF

d:01 = Extra Dry Heat is ON

3 Press Start to save your setting.

Auto Power Off

NOTE: Setting can only be changed for models with a display. For models without a display, the default setting is P:00

To save energy, the dishwasher is turned off 1 minute after the wash cycle ends. This setting can be adjusted from P:00 to P:02.

To change the setting:

1 Open the door and press the [On/Off] button.

2 Hold down the “A” button (see page 17)and press [Start] until the display indicates “d:0x” (x can be any number). Release both buttons.

3 Press the “A” button until the display indicates “P:0x”.

4 Press the “C” button until the display corresponds with your requirements.

P:00 = dishwasher does not turn off automatically

P:01 = dishwasher turns off automatically after 1 minute

P:02 = dishwasher turns off automatically after 120 minutes (2 hours)

5 Press [Start] to save the setting.

For Models without Display

To enter options mode:

1 Press the On/Off button to turn the unit on. For models with the buttons on top, the door must be open. For models with the buttons on the

front, the door mustbe closed.

2 One of the wash cycle LEDs will be flashing.

3 Press and hold down the > button, then simultaneously press and release the Start

button. Now release the > button.

4 The “Clean” and one other LED (varies by model) will be flashing. You are now in options mode.

5 Press the > button to select the option you would like to adjust.

To set amount of Rinse Aid:

NOTE: If your glasses have spots on them, you need more rinse aid. If your glasses have streaks on them, you need less rinse aid.

1 Follow the above instructions to enter options mode.

With the “Clean” and “Rinse Aid” LEDs flashing, press the

button to change the amount of rinse aid dispensed. The “Clean” and “Rinse Aid” LEDs keep

flashing and:

0 wash cycle LEDs on = rinse aid is OFF

1 wash cycle LED on = lowest amount of rinse aid dispensed

2 wash cycle LEDs on = medium amount of rinse aid dispensed

3 wash cycle LEDs on = highest amount of rinse aid dispensed

3 Press Start to save your setting.

To turn Extra Dry Heat ON or OFF:

1 Follow the above instructions to enter options mode.

2 With the “Clean” and “Sanitized” LEDs flashing, press the < button to turn Extra Dry Heat ON or OFF. The “Clean” and “Sanitized” LEDs keep flash-

ing and:

0 wash cycle LEDs on = Extra Dry Heat is OFF

1 wash cycle LED on = Extra Dry Heat is ON

3 Press Start to save your setting.

Care and Maintenance

Maintenance Tasks

Certain areas of the dishwasher require occasional maintenance. The maintenance tasks are easy to do and will

ensure continued superior performance from your dishwasher.

Wiping up Spills and Splash-outs

Water may occasionally splash out of your dishwasher, particularly if you interrupt a cycle or open the dishwasher

door during a cycle. To avoid floor damage and possibly mold growth, do not allow wet areas to remain around or

under the dishwasher.

Clean the Stainless Steel Inner Door and Tub

Clean the outer edges of the inside door panel regularly to remove debris that may collect from normal loading. If

spots begin to appear on the stainless steel, make sure the rinse agent is full and functioning properly.

Check and Clean Spray Arm Nozzles

Remove the upper spray arm by first removing the empty upper rack from the dish-

washer. Turn the rack upside down. The upper spray arm is held in position by a locking

nut as shown in Figure 8. Turn the locking nut counterclockwise and remove it to release

the spray arm. Look for obstruction in the spray nozzles. If the spray nozzles need clean-

ing, flush them under running water.

To reinstall the upper spray arm, place it back in position and return the locking nut to

its install position. Turn the locking nut clockwise to secure. Return the upper rack to

the upper rack roller guides.

Remove the lower spray arm by first removing the empty lower rack from the dish-

washer. Grasp and lift the spray arm as shown in Figure 9. Look for obstruction in the

spray nozzles. If the spray nozzles need cleaning, flush them under running water.

To reinstall the lower spray arm, return the lower spray arm to the installed position and

press it until it snaps into place. Return the lower rack to the installed position.

Check and Clean the Filter System

The filter system consists of a Large Object Trap, Fine Filter and a Micro Filter.

The filter system is located on the inside of your dishwasher under the lower rack and is

easily accessible. During normal use, the filter system is self-cleaning. You should occa-

sionally inspect it for foreign objects and clean it when necessary.

WARNINGWARNIN

To remove the Large Object Trap, remove the lower rack. Grasp the assembly

and turn it counterclockwise as shown in Figure 10. Lift the assembly out.

Carefully examine the assembly. If you find debris in the Large Object Trap, turn it

upside-down and gently tap it on a flat surface to dislodge and remove debris.

Flush the Micro Filter clean by holding it under running water.

To reinstall the filter system, return the fine filter to the installed position. Turn the

locking nut clockwise until it is locked. The arrow on the ring handle and the arrow

on the Fine Filter should point at each other.

9WARNING

Use caution when removing parts for cleaning as some debris may

be sharp.

Figure 8

Figure 9

Fine

Filter

Trap

Micro

Filter

Large Object

Figure 10

Clean the Exterior Door Panel

Colored doors: use only a soft cloth dampened with soapy water.

Stainless steel doors: use a soft cloth with a non-abrasive cleaner (preferably a liquid spray) made for cleaning

stainless steel. For the best results, apply the stainless steel cleaner to the cloth and then wipe the surface.

Clean the Door Gasket

Regularly clean the door gasket with a damp cloth to remove food particles and other debris. Also clean the door

seal, located inside the dishwasher at the bottom of the door.

Preparing your Dishwasher for Vacation

Before leaving for vacation during warmer weather, besides turning off the main valve, also turn off wa-

ter supply at the nearest point to the dishwasher. During colder weather, please follow the instructions

for winterizing your unit below.

Winterizing your Dishwasher

If your dishwasher will be unused for an extended period of time in a location that experiences freezing

temperatures (holiday home or through a vacation period), have your dishwasher winterized by a pro-

fessional servicer.

Troubleshooting

Dishwashers may occasionally exhibit problems that are unrelated to a malfunction of the dishwasher itself. The

following information may help you with a dishwasher problem without involving a repair professional.

NOTICE

Problem Cause Action

Cycle does not

resume after

door is opened

and closed dur-

ing cycle.

1. Door is opened longer than 4 seconds

after a cycle has started.

1. Press [START/RESUME] button again to resume cycle.

Self-latching

door not clos-

ing properly

1. Self-latching feature will not work prop-

erly if dishwasher is not installed correctly.

1. Ensure the alignment of the dishwasher frame is accu-

rate and level.

Dishwasher

does not start

1. Door may not be properly latched.

2. Unit may not be turned on.

3. Unit not reset or previous cycle not com-

pleted.

4. Delay start engaged.

5. Interruption of electrical power supply to

dishwasher or blown fuse.

6. The door may have been closed without

first selecting a cycle.

7. Water supply may not be turned on.

1. Shut the door completely until you hear a click.

2. Press the main power switch to turn unit on.

3. To reset, refer to “Cancel a Cycle”

section

of this manual.

4. To reset, refer to “Delay Start” section of this manual.

5. Check circuit breaker.

6. Select a cycle and close the door.

7. Check and turn on water supply.

Display does

not illuminate

or console

lights are not

1. A fuse may have been blown or circuit breaker

tripped.

2. Door not closed or latched.

NOTE: For models with controls on top of the

door, the display only illuminate when the door

is opened and controls are visible.

1. Check the fuse or circuit breaker box and replace the

fuse or reset the breaker if necessary.

2. Ensure door is properly latched and completely closed

until you hear it click.

117

Dishwasher

seems to run a

long time

1. Incoming water is not warm enough.

2. Cycle time can vary due to soil and water con-

ditions.

3. Rinse agent dispenser is empty.

4. Dishwasher connected to cold water sup-

ply.

NOTE: Refer to “Wash Cycle Information” sec-

tion of this manual for typical cycle lengths.

1. Before starting a cycle, run hot water faucet at the sink

closest to the dishwasher.

2. Sensors in the dishwasher automatically increase the

cycle time to ensure a good wash when heavy soil is

detected.

3. Add rinse agent.

4. Verify dishwasher is connected to hot water supply

plumbing.

Dishes are not

getting clean

enough

1. Spray arm movement obstructed.

2. Spray arm nozzles clogged.

3. Improper use of detergents.

4. Filters could be clogged.

5. Dishes are nested or loaded too close

together.

6. Selected wash cycle is not suitable for

food soil conditions.

1. Ensure that spray arm movement is not blocked by

hand rotating spray arms before starting cycle.

2. Remove the spray arms and clean according to the

“Care and Maintenance” section of the manual.

3. Increase or decrease detergent depending on the water

hardness (refer to Table 1).

4. Clean the filters according to the “Care and Mainte-

nance” section of the manual.

5. Rearrange load such that water spray can reach all

items in the dishwasher - see “Loading the Dishwasher”

section of the manual.

6. Refer to “Wash Cycle Information” section of the manual.

Dishes are not

getting dry

enough

1. Rinse agent dispenser is empty.

2. Improper loading of dishes.

3. Selected cycle does not include drying.

4. Extra Dry Heat is not activated.

NOTE: Plastic or Teflon do not typically dry as

well as other items due to their inherent prop-

erties.

1. Add rinse agent - the use of rinse agent improves dry-

ing.

2. Rearrange load to ensure items are not nesting (see

“Loading the Dishwasher” section of the manual).

3. Rinse and Hold setting does not include drying.

4. See the “Operating the Dishwasher” section of this

manual to learn how to activate Extra Dry Heat.

Odor

Note: Water

testing is done in

the factory.

Occasionally

water may still

appear in the

dishwasher at

purchase which

may create an

odor.

1. Food debris is present at the bottom of

the dishwasher.

2. Food particles are present near the door

seal.

3. Dishes left in unit too long before running a

cycle.

4. Residual water is present at the bottom

of the dishwasher.

5. Drain hose is obstructed.

1. Remove the filters and clean according to the “Care

and Maintenance” section of the manual.

2. Refer to “Care and Maintenance” section of the manual.

3. Run a Rinse and Hold cycle if you do not intend to

immediately wash the dishes.

4. Ensure the unit has completely drained from the last

cycle.

5. Remove any obstructions from the drain hose by calling

qualified personnel.

NOTE: If odor still persists, run the Normal/Regular cycle until

it flushes and interrupt the cycle and place an 8 oz. cup of dis-

tilled white vinegar solution on the upper rack and then finish

the cycle.

Dishwasher not

filling with

water

1. Restriction in the water supply system.

2. Previous wash cycle was not completed.

3. Delay start is active.

4. Household water supply turned off.

1. Ensure that the water supply valve (typically located

under kitchen sink) is open and check that the water sup-

ply line has no kinks or clogs.

2. Refer to the “Operating the Dishwasher” section of the

manual.

3. Cancel the delay start or wait until delay start time

completes.

4. Turn household water supply on.

Water leaks 1. Suds.

2. Door seal could be pulled away from

track.

3. Condensation vent is blocked.

4. Improper installation.

1. Wrong type of detergent results in suds and leaks - use

only dishwasher detergents. If suds still persist, add one

tablespoon of vegetable oil at the bottom of the dish-

washer and run the desired cycle.

2. Ensure the door seal is in the track.

3. Ensure that condensation vent is not blocked.

4. Have proper installation verified by qualified personnel

(water supply, drain system, leveling, plumbing).

Problem Cause Action

Customer Service

Your Bosch® dishwasher requires no special care other than that described in the Care and Maintenance section of this

manual. If you are having a problem with your dishwasher, before calling for service please refer to the Self Help section

of the manual. If service is necessary, contact your dealer or installer or an authorized service center. Do not attempt to

repair the appliance yourself. Any work performed by unauthorized personnel may void the warranty.

If you are having a problem with your Bosch® dishwasher and are not pleased with the service you have received,

please take the following steps until the problem is corrected to your satisfaction:

1 Call us at 1-800-944-2904

2 Contact Customer Service from our web site: www.bosch-home.com/us or www.bosch-appliances.ca

3 Contact your installer or the Bosch® Authorized Service Contractor in your area.

4 Write us: http://www.bosch-home.com/us/customer-support/contact-us.html

Please be sure to include your model information as well as an explanation of the problem and the date it started.

You will find the model and serial number information on the label located on the edge of the dishwasher door.

Please make a copy of your invoice and keep it with this manual. The customer must show proof of purchase to

obtain warranty service.

Tub stains 1. Stains on the dishwasher interior are due to

water hardness.

2. Silverware in contact with tub.

1. Concentrated lemon juice can reduce the build up of

hard water stains. Run a Regular cycle until it flushes and

interrupt the cycle and then place an 8 oz. cup of the con-

centrated lemon solution on the upper rack and finish the

cycle. this can be done periodically to avoid build up.

2. Ensure that silverware does not make contact with the

tub while running a cycle.

Streaks on

glassware or

residue on the

dishes

1. Incorrect rinse agent setting. 1. Depending on the hardness of water, adjust the rinse

agent dispenser. Refer to “Operating the Dishwasher”

section of the manual.

Fascia panel

discolored or

marked

1. Abrasive cleaner used. 1. Use mild detergents with soft damp cloth.

Noise during

wash cycle

1. Dishes may not be arranged properly.

1. Water circulation sound is normal, but if you suspect items

are banging into each other or into the spray arms, refer to the

“Loading the Dishwasher” section on page 6-7 of the manual

for optimal arrangement.

Detergent dis-

penser cover

will not shut

1. Improper operation of detergent cover.

2. Previous cycle has not been finished or

rest or cycle or interrupted.

1. Refer to “Adding Detergent and Rinse Agent” section on

page 9-10 of the manual for instructions on opening and

closing the dispenser.

2. Refer to the “Operating the Dishwasher” section of the

manual.

Unable to

select desired

cycle

1. Previous cycle has not finished. 1. Refer to the “Operating the Dishwasher” section of the

manual.

Problem Cause Action

La page est en cours de chargement...

Bosch SHE3ARB5UC/01 Manuel utilisateur

Marque: Bosch

Modèle: SHE3ARB5UC/01

Catégorie: Lave-vaisselle

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Bosch SHE3ARB5UC/01 User manual

Bosch SHE3ARB5UC/01 Manuel utilisateur

Bosch SHE3ARB5UC/01 Manuel utilisateur

dans d''autres langues

Documents connexes