REOLINK Argus 3 Series Mode d'emploi

Marque: REOLINK

Modèle: Argus 3 Series

Taper: Mode d'emploi

Reolink Argus 3 Series

Quick Start Guide

March 2021

QSG1_B_EN

58.03.001.0245 @ReolinkTech https://reolink.com

2English

1 English

What's in the Box

Camera Introduction

Set up the Camera

Charge the Battery

Install the Camera

Safety Instructions of Battery Usage

Troubleshooting

Speciﬁcations

Notiﬁcation of Compliance

13 Pack of Screws Quick Start GuideSurveillance Sign

Camera Security Bracket

Mounting Template

Reset Needle

What’s in the Box

Micro USB Cable

Contents

NOTE:

* Quantity of accessories varies with dierent camera models that you purchase.

Loop StrapStand Bracket

USB

OFF

MicroSD

RST

4English3 English

Camera Introduction

Battery Status LED

Set up the Camera using a Smartphone

Red Light: WiFi connection failed

Blue Light: WiFi connection succeeded

Blinking: Standby status

On: Working status

Set up the Camera

NOTE: Always keep the rubber plug closed ﬁrmly.

Speaker

Spotlight

Lens

Daylight Sensor

Reset Button

Dierent states of the status LED:

Status LED

Built-in Mic

PIR Motion Sensor

Power Switch

Micro SD Card Slot

* Press for more than ﬁve seconds to reset

the device to factory settings.

Micro USB Power Port

Step 1 Scan to download the Reolink App from the App Store or Google Play store.

Step 2 Turn on the power switch to power on the camera.

MicroSD

Switch

6English5 English

Set up the Camera on PC (Optional)

always keep the USB charging port covered

with the rubber plug after charging the

battery.

Charge the Battery

Charge the battery with a

power adapter.

Charging indicator:

Orange LED: Charging Green LED: Fully charged

Step 1 Download and install the Reolink Client: Go to https://reolink.com > Support > App & Client.

Step 2 Launch the Reolink Client, click the " " button, input the UID code of the camera to add it

and follow the onscreen instructions to ﬁnish initial setup.

Step 3 Launch the Reolink App, and click the “ ” button in the top right corner to add the camera.

Scan the QR code on the device and follow the onscreen instructions to ﬁnish initial setup.

Devices

Cloud

You haven't added any device. Please click

the"+"button in the top right corner to add

Mount the Camera

8English7 English

Rotate to separate the base

from the bracket.

Drill holes in accordance with the mounting

template and screw the base of the bracket to

the wall. Next, attach the other part of the

bracket to the base.

NOTE: Use the drywall anchors included in the

package if needed.

1 2

Place the Camera on a Surface

10English

9 English

Screw the camera to

the bracket.

Adjust the camera angle to

get the best ﬁeld of view.

Secure the camera by turning

the part on the bracket

identiﬁed in the chart

clockwise.

NOTE:

To adjust the camera angle later, please loosen the bracket by turning the upper part anticlockwise.

If you plan to use the camera

indoors and put it on a ﬂat

surface, you may place the

camera into the stand bracket

and adjust the camera angle

by slightly rotating the camera

back and forth.

3 4 5

11 English

Safety Instructions of Battery Usage Troubleshooting

Camera Is Not Powering on

Failed to Scan QR Code on

the Phone

If your camera is not turning on, please apply

the following solutions:

• Make sure the power switch is turned on.

• Charge the battery with a DC 5V/2A power

adapter. When the green light is on, the

battery is fully charged.

If these won't work, please contact Reolink

Support https://support.reolink.com

If you cannot scan the QR code on your

phone, please try the following solutions:

• Remove the protective ﬁlm from the

camera lens.

• Wipe the camera lens with a dry

paper/towel/tissue.

Failed to Connect to WiFi During

Initial Setup Process

If the camera fails to connect to WiFi, please

try the following solutions:

• Ensure that you have entered the correct

WiFi password.

• Put the camera closer to your router to

ensure a strong WiFi signal.

• Change the encryption method of the WiFi

network to WPA2-PSK/WPA-PSK (safer

encryption) on your router interface.

• Change your WiFi SSID or password and

make sure that SSID is within 31 characters and

password is within 64 characters.

• Vary the distance between your camera and

the mobile phone so that the camera can

focus better.

• Try to scan the QR code under sucient

lighting.

If these won't work, please contact Reolink

Support https://support.reolink.com

Reolink Argus 3/Argus 3 Pro is not designed for running 24/7 atfull capacity or around-the-clock

live streaming. It’s designed to record motion events and to live view remotely only when you need

it. Learn useful tips on how to extend the battery life in this post:

https://support.reolink.com/hc/en-us/articles/360006991893

1. The battery is built-in, so do not remove it from the camera.

2. Charge the rechargeable battery with a standard and high-quality DC 5V/9V battery charger or

Reolink solar panel. Do not charge the battery with solar panels from any other brands.

3. Charge the battery when temperatures are between 0°C and 45°C and always use the battery

when temperatures are between -20°C and 60°C.

4. Keep the USB charging port dry, clean and free of any debris and cover the USB charging port

with the rubber plug when the battery is fully charged.

5. Do not charge, use or store the battery near any ignition sources, such as ﬁre or heaters.

6. Do not use the battery if it gives o an odor, generates heat, becomes discolored or deformed, or

appears abnormal in any ways. If the battery is being used or charged, remove the battery from the

device or the charger immediately, and stop using it.

7. Always follow the local waste and recycle laws when you get rid of the used battery.

12English

13 English 14English

Speciﬁcations

Video

Field of View: 120° diagonal

Night Vision: Up to 10m (33 ft)

PIR Detection & Alerts

PIR Detection Distance:

Adjustable up to 10m (33ft)

PIR Detection Angle: 100° horizontal

Audio Alert: Customized voice-recordable alerts

Other Alerts:

Instant email alerts and push notiﬁcations

General

Operating Temperature:

-10°C to 55°C (14°F to 131°F)

Weather Resistance:IP65 certiﬁed weatherproof Size: 121 x 90 x 56 mm

Weight (Battery included): 330g (11.6 oz)

For more speciﬁcations, visit

https://reolink.com/.

Notiﬁcation of Compliance

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with

minimum distance 20cm between the radiator & your body.

• Set your password using only the characters

available on the keyboard.

If these won't work, please contact Reolink

Support https://support.reolink.com

English 15

IC statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic DevelopmentCanada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

(1)This device may not cause interference.

(2)This device must accept any interference, including interference that may cause undesired operation of the device.

The term “IC: “ before the certification/registration number only signifies that the Industry Canada technical specifications were met.

This product meets the applicable Industry Canada technical specifications.

Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d'Innovation, Sciences etDéveloppement économique Canada. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pasproduire

de brouillage,et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme auxCNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes :

1)L'appareil ne doit pas produire de brouillage;

2)L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre lefonctionnement.

This transmitter must not be co-located or operating in conjunction with any other antenna ortransmitter. This equipment should be installed and operated with a minimum distance of 20centimeters between the radiator and your body.

Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ouémetteur. Cet équipementdevrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps.

Operation of this device is restricted to indoor use only. (5180-5240MHz)

Le fonctionnement de cet appareil est limité à une utilisation en intérieur uniquement.

(5180-5240MHz)