Thrustmaster T.Flight Hotas One Manuel utilisateur

Europe, Middle East

ENGLISH

FRANÇAIS

DEUTSCH

NEDERLANDS

ITALIANO

ESPAÑOL

PORTUGUÊS

РУССКИЙ

ČESTINA

TÜRKÇE

POLSKI

SVENSKA

SUOMI

SLOVENCINA

MAGYAR NYELV

תירבע

ﺔﻴﺑﺮﻌﻟا

North America/

Norteamérica

ENGLISH

FRANÇAIS

ESPAÑOL

Latin America/

América Latina

ENGLISH

ESPAÑOL

PORTUGUÊS

Asia Pacic

日本語

简体中文

繁體中文

ENGLISH

1/12

XBOX SERIES X|S - XBOX ONE - PC

User Manual

TECHNICAL FEATURES

1. Throttle

2. USB connector

3. Rudder connector: RJ12 Thrustmaster

Rudder (sold separately) connector

4. Rudder function via twisting handle

5. Rudder locking screw on handle

6. Allen key to install or separate the

throttle

7. Handle resistance adjustment dial

8. Rudder via rocking button

9. Action buttons

10. VIEW – GUIDE – MENU buttons + LED

indicator

11. Multidirectional "Point Of View" hat-

switch

12. Xbox/PC selector switch

2/12

GETTING TO KNOW YOUR HOTAS JOYSTICK

THROTTLE

Your joystick features a large throttle which you can use to easily control the acceleration of your

aircraft.

The throttle is detachable and may be positioned in 2 different ways, either:

Detached and separated from the joystick

(to re-create authentic piloting conditions)

Attached to the joystick

(for greater stability and to take up less space).

By default, the throttle comes detached from the joystick.

To attach the throttle to the joystick:

1. Turn both items upside down (the throttle and the joystick).

2. Take the Allen key (6) attached underneath the base of the joystick.

3. Position the throttle to the left of the joystick.

Insert the connecting tab on the left of the joystick's base into the opening on the right hand

side of the throttle.

4. Using the key, tighten the two Allen screws underneath the base

(located on the left-hand side of the joystick's base).

5. Wind up the throttle cable and thread it through the cable guide slot.

6. Put the Allen key back in its place so as not to lose it.

Carry out this procedure in reverse to detach the throttle from the joystick.

3/12

ADJUSTABLE HANDLE RESISTANCE

Depending on your style of gaming, you may wish to have an ultra-sensitive joystick, which

responds to the slightest touch, or you may prefer to have a firmer joystick, which offers some

resistance when you move it.

Your joystick's handle resistance is adjustable, in order to adapt to all players. To adjust it, use

the handle resistance adjustment dial (7) located underneath your joystick's base.

RUDDER FUNCTION

Your joystick features a rudder function, which in a plane corresponds to the pedals used by

the pilot to turn the steering, allowing the plane to pivot around its vertical axis (therefore

making the plane turn left or right). This rudder function is accessible on your joystick by

rotating the handle to the left or right.

This rudder function is accessible in three ways:

- on your joystick by rotating the handle (4) to the left or right.

- via the rocking button (8) on the throttle.

- or via the TFRP RUDDER rudder pedals system (sold separately).

If you are only using the rocking button (or if you are not using the rudder function), you can

disable the handle's rotation thanks to the locking screw (5) located on the base of the

joystick. Use a flat head screwdriver to change the screw’s position and thus lock/unlock the

rudder function.

4/12

INSTALLING THE TFRP RUDDER

ON THE T.FLIGHT HOTAS ONE JOYSTICK

The T.Flight Hotas One joystick has 8 axes, including 3 axes reserved for the TFRP

RUDDER rudder pedals system (sold separately).

The TFRP RUDDER rudder pedals system connects directly to the joystick.

1. Connect the rudder pedals system’s male RJ12 connector to the female RJ12 connector

(3) located at the back of the joystick.

2. Connect the joystick’s USB connector (2) to one of your PC’s USB ports.

Important notes regarding the automatic calibration of axes:

- Always keep the rudder’s axis centered when connecting the TFRP rudder pedals system

to the joystick. Never put your feet on the rudder pedals.

- The pedals’ 3 axes calibrate themselves automatically after a few movements and once the

physical stops of the rudder’s axis and of the differential brakes’ 2 axes have been reached.

MULTIDIRECTIONAL "POINT OF VIEW" HAT-SWITCH

Your joystick features a “Point Of View” hat-switch (11) which, as its name indicates, allows

you (in games which permit) to instantly view everything that’s going on around your plane.

To do so, simply go to your game’s configuration menu and program the different views (rear

view, left view, right view, and also external views) onto the directions of the “Point Of View”

hat-switch.

Of course, you can also use the “Point Of View” hat-switch for other functions instead (firing,

etc.).

5/12

XBOX SERIES X|S / XBOX ONE

INSTALLATION ON XBOX SERIES X|S / XBOX ONE

1. Set the selector switch (12) to Xbox before connecting the USB cable.

2. Connect the USB connector (2) to one of your system’s USB ports.

3. Switch on your console.

4. The joystick’s LED indicator lights up in white.

5. Launch a game that supports the Flight Stick mode.

You are now ready to play!

LIST OF COMPATIBLE XBOX SERIES X|S / XBOX ONE GAMES

On Xbox Series X|S / Xbox One, the T.Flight Hotas One:

- Is only compatible with the games that support the Flight Stick mode.

- Is recognized in games as a real joystick and not a gamepad, for better responsiveness

and enhanced precision, and possibility to access the joystick’s options in these games.

A list of Xbox Series X|S / Xbox One games compatible with the joystick is available at

https://support.thrustmaster.com. Go to Joysticks / T.Flight Hotas One, then select Games

Settings.

This list will be added to regularly, with the arrival of new Xbox Series X|S / Xbox One games

compatible with T.Flight Hotas One.

6/12

PC

INSTALLATION ON PC

1. Set the selector switch (12) to PC before connecting the USB cable.

2. Go to https://support.thrustmaster.com/. Click Joysticks / T.Flight Hotas One, then

select Drivers. Download and install the PC driver and its customized interface for the

Windows Control Panel.

3. Once the PC driver is installed, connect the USB connector (2) to one of your PC’s USB

ports.

4. To access the Control Panel, select:

- Start / Apps / Thrustmaster / Control Panel (in Windows® 10 / 8.1 / 8)

- Start / All Programs / Thrustmaster / Control Panel (in Windows® 7)

The Game Controllers dialog box is displayed.

The device appears onscreen with the name T.Flight Hotas One and the status OK.

7/12

5. In the Game Controllers dialog box, click Properties to test and view all functions.

You are now ready to play!

8/12

NOTES ON PC

- On PC, in 4/6 axes mode, the throttle’s rocking button and the rudder axis on the TFRP

rudder pedals system (sold separately) are coupled with the handle’s rotation.

The joystick’s LED indicator lights up in white.

- On PC, in 5/8 axes mode, the throttle’s rocking button and the rudder axis on the TFRP

rudder pedals system (sold separately) become independent of the handle’s rotation,

thereby providing 3 additional progressive axes.

The joystick’s LED indicator goes off.

To instantly switch between one mode and the other, simply press the XBOX GUIDE

button.

9/12

UPDATING YOUR JOYSTICK’S FIRMWARE

The firmware included in your joystick’s base can be updated to a more recent version

featuring product enhancements.

To display the firmware version that your Joystick is currently using and update it if required:

on PC, visit https://support.thrustmaster.com. Click Joysticks / T.Flight Hotas One, then

select Firmware and follow the instructions describing the download and installation

procedure.

TROUBLESHOOTING AND WARNINGS

• My joystick doesn’t function correctly or appears to be improperly calibrated:

- Make sure that the selector switch (12) is set to the proper position (Xbox or PC) before

connecting the USB cable to the console or PC.

- Switch off your console or your PC, disconnect your joystick, reconnect your joystick and

then re-launch your game.

- When connecting your joystick: Leave the handle, rudder and throttle centered and do not

move them (to avoid any calibration problems).

• My joystick is too sensitive or not sensitive enough:

- Your joystick self-calibrates on its own after you have made a few movements on the

different axes.

- In your game’s “Options / Controller / Gamepad or Joystick” menu: Adjust the sensitivity or

dead zones for your controller (if this option is available).

- Adjust the handle resistance using the dial (7) located under your joystick’s base.

• The rudder function is too sensitive:

- Disable the handle's rotation using the locking screw (5) located on the base of the joystick

and use the rocking button for the rudder function.

HELP FILES AND FAQS (NOT INCLUDED IN THIS MANUAL)

Please visit https://support.thrustmaster.com. Click Joysticks / T.Flight Hotas One, then

select Manual or FAQ.

10/12

CONSUMER WARRANTY INFORMATION

Worldwide, Guillemot Corporation S.A., whose registered office is located at Place du Granier, B.P. 97143,

35571 Chantepie, France (hereinafter “Guillemot”) warrants to the consumer that this Thrustmaster product

shall be free from defects in materials and workmanship, for a warranty period which corresponds to the time

limit to bring an action for conformity with respect to this product. In the countries of the European Union, this

corresponds to a period of two (2) years from delivery of the Thrustmaster product. In other countries, the

warranty period corresponds to the time limit to bring an action for conformity with respect to the Thrustmaster

product according to applicable laws of the country in which the consumer was domiciled on the date of

purchase of the Thrustmaster product (if no such action exists in the corresponding country, then the warranty

period shall be one (1) year from the original date of purchase of the Thrustmaster product).

Notwithstanding the above, rechargeable batteries are covered by a warranty period of six (6) months from the

date of original purchase.

Should the product appear to be defective during the warranty period, immediately contact Technical Support,

who will indicate the procedure to follow. If the defect is confirmed, the product must be returned to its place of

purchase (or any other location indicated by Technical Support).

Within the context of this warranty, the consumer’s defective product shall, at Technical Support’s option, be

either replaced or returned to working order. If, during the warranty period, the Thrustmaster product is subject

to such reconditioning, any period of at least seven (7) days during which the product is out of use shall be

added to the remaining warranty period (this period runs from the date of the consumer’s request for

intervention or from the date on which the product in question is made available for reconditioning, if the date

on which the product is made available for reconditioning is subsequent to the date of the request for

intervention). If permitted under applicable law, the full liability of Guillemot and its subsidiaries (including for

consequential damages) is limited to the return to working order or the replacement of the Thrustmaster

product. If permitted under applicable law, Guillemot disclaims all warranties of merchantability or fitness for a

particular purpose.

This warranty shall not apply: (1) if the product has been modified, opened, altered, or has suffered damage as

a result of inappropriate or abusive use, negligence, an accident, normal wear, or any other cause unrelated to

a material or manufacturing defect (including, but not limited to, combining the Thrustmaster product with any

unsuitable element, including in particular power supplies, rechargeable batteries, chargers, or any other

elements not supplied by Guillemot for this product); (2) if the product has been used for any use other than

home use, including for professional or commercial purposes (game rooms, training, competitions, for

example); (3) in the event of failure to comply with the instructions provided by Technical Support; (4) to

software, said software being subject to a specific warranty; (5) to consumables (elements to be replaced over

the product’s lifespan: disposable batteries, audio headset or headphone ear pads, for example); (6) to

accessories (cables, cases, pouches, bags, wrist-straps, for example); (7) if the product was sold at public

auction.

This warranty is nontransferable.

The consumer’s legal rights with respect to laws applicable to the sale of consumer goods in his or her country

are not affected by this warranty.

11/12

Additional warranty provisions

During the warranty period, Guillemot shall not provide, in principle, any spare parts, as Technical Support is

the only party authorized to open and/or recondition any Thrustmaster product (with the exception of any

reconditioning procedures which Technical Support may request that the consumer carry out, by way of written

instructions – for example, due to the simplicity and the lack of confidentiality of the reconditioning process –

and by providing the consumer with the required spare part(s), where applicable).

Given its innovation cycles and in order to protect its know-how and trade secrets, Guillemot shall not provide,

in principle, any reconditioning notification or spare parts for any Thrustmaster product whose warranty period

has expired.

In the United States of America and in Canada, this warranty is limited to the product’s internal mechanism and

external housing. In no event shall Guillemot or its affiliates be held liable to any third party for any

consequential or incidental damages resulting from the breach of any express or implied warranties. Some

States/Provinces do not allow limitation on how long an implied warranty lasts or exclusion or limitation of

liability for consequential or incidental damages, so the above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from State to State

or Province to Province.

Liability

If permitted under applicable law, Guillemot Corporation S.A. (hereinafter “Guillemot”) and its subsidiaries

disclaim all liability for any damages caused by one or more of the following: (1) the product has been

modified, opened or altered; (2) failure to comply with assembly instructions; (3) inappropriate or abusive use,

negligence, an accident (an impact, for example); (4) normal wear; (5) the use of the product for any use other

than home use, including for professional or commercial purposes (game rooms, training, competitions, for

example). If permitted under applicable law, Guillemot and its subsidiaries disclaim all liability for any damages

unrelated to a material or manufacturing defect with respect to the product (including, but not limited to, any

damages caused directly or indirectly by any software, or by combining the Thrustmaster product with any

unsuitable element, including in particular power supplies, rechargeable batteries, chargers, or any other

elements not supplied by Guillemot for this product).

DECLARATION OF CONFORMITY

CANADIAN COMPLIANCE NOTICE: this Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

USA COMPLIANCE NOTICE: this equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment on and

off, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

12/12

COPYRIGHT

Guillemot Corporation S.A. All other trademarks are the property of their respective owners. Illustrations not

binding. Contents, designs and specifications are subject to change without notice and may vary from one

country to another. Made in China.

ENVIRONMENTAL PROTECTION RECOMMENDATION

In the European Union: At the end of its working life, this product should not be

disposed of with standard household waste, but rather dropped off at a collection point

for the disposal of Waste Electrical and Electronic Equipment (WEEE) for recycling.

This is confirmed by the symbol found on the product, user manual or packaging.

Depending on their characteristics, the materials may be recycled. Through recycling

and other forms of processing Waste Electrical and Electronic Equipment, you can

make a significant contribution towards helping to protect the environment.

Please contact your local authorities for information on the collection point nearest you.

For all other countries: Please adhere to local recycling laws for electrical and electronic equipment.

Retain this information. Colours and decorations may vary.

Plastic fasteners and adhesives should be removed from the product before it is used.

www.thrustmaster.com

*Applicable to EU, UK and Turkey only

*

TECHNICAL SUPPORT

https://support.thrustmaster.com

*

WARNING: This product can expose you to chemicals including Bisphenol A (BPA) which

is known to the State of California to cause birth defects or other reproductive harm. For more

information go to http://www.p65warnings.ca.gov/

1/12

XBOX SERIES X|S - XBOX ONE - PC

Manuel de l'utilisateur

CARACTÉRISTIQUES TECHNIQUES

1 Manette des gaz

2 Connecteur USB

3 Connecteur de palonnier RJ12

Thrustmaster Rudder (vendu

séparément)

4 Palonnier par rotation du manche

5 Vis de blocage du palonnier sur le

manche

6 Clé Allen pour installer ou séparer la

manette des gaz du manche

7 Molette de réglage de la résistance

8 Palonnier par bouton bascule

9 Boutons d’action

10 Boutons VIEW – GUIDE – MENU +

Voyant lumineux

11 Croix multidirectionnelle Point de vue

12 Sélecteur Xbox/PC

2/12

À LA DÉCOUVERTE DE VOTRE JOYSTICK HOTAS

MANETTE DES GAZ

Votre joystick dispose d’une imposante manette des gaz grâce à laquelle vous pourrez

aisément contrôler l’accélération de votre appareil.

La manette des gaz est amovible et peut-être positionnée de 2 manières différentes :

- Soit détachée et séparée du manche

(pour récréer les véritables conditions de pilotage)

- Soit fixée au manche

(pour un gain de stabilité et de place).

La manette des gaz est livrée par défaut détachée du manche.

Pour fixer la manette des gaz au manche :

1. Retournez les 2 éléments (manette des gaz et manche)

2. Prenez la clé Allen (6) fixée sous la base du manche.

3. Positionnez la manette des gaz à gauche du manche.

Insérez le crochet qui est situé sur la gauche du manche dans la fente qui est situé à droite

de la manette des gaz.

4. A l’aide de la clé, vissez les deux vis Allen sous la base

(situées à l’extrémité gauche de la base du manche).

5. Enroulez et fixez le câble de la manette des gaz dans le passe-fil prévu à cet effet.

6. Remettez la clé Allen dans son emplacement pour ne pas l’égarer. Effectuez l’opération

inverse pour détacher la manette des gaz du manche.

3/12

RESISTANCE DU MANCHE AJUSTABLE

Selon votre façon de jouer, vous voudrez un joystick ultra-sensible, qui réponde à la moindre

impulsion, ou au contraire un joystick plus dur, qui présente une certaine résistance lorsque

vous le manipulez.

La résistance du manche de votre joystick est ajustable pour s’adapter à tous les joueurs.

Utilisez pour cela la molette de réglage de la résistance (7) située sous la base de

votre joystick.

FONCTION PALONNIER

Votre joystick dispose d’une fonction palonnier, qui correspond dans un avion aux pédales

actionnées par le pilote pour faire braquer la gouverne de direction, permettant de faire

pivoter l’avion autour de son axe vertical (entraînant ainsi un virage de l’avion vers la gauche

ou la droite).

Cette fonction palonnier est accessible de trois façons :

- sur votre Joystick par rotation du manche (4) vers la gauche ou la droite

- via le bouton bascule (8) sur la manette des gaz

- ou via le palonnier TFRP RUDDER (vendu séparément).

Si vous utilisez uniquement le bouton bascule (ou que vous n’utilisez

pas

la

fonction

palonnier), vous pouvez alors désactiver la rotation du manche grâce à la vis de blocage (5)

située à la base du manche. Utilisez un tournevis à tête plate pour modifier sa position et

ainsi verrouiller/déverrouiller la rotation du manche.

4/12

INSTALLATION DU PALONNIER TFRP RUDDER

SUR LE JOYSTICK T.FLIGHT HOTAS ONE

Le joystick T.Flight Hotas One possède 8 axes, dont 3 axes sont réservés au palonnier

TFRP RUDDER (vendu séparément).

Le palonnier TFRP RUDDER se branche directement sur le joystick.

1. Branchez le connecteur mâle RJ12 du pédalier sur le connecteur femelle RJ12 (3) situé à

l’arrière du joystick.

2. Branchez le connecteur USB du joystick (2) sur l’un des ports USB de votre PC.

Remarques importantes relatives à la calibration automatique des axes :

- Laissez toujours l’axe du palonnier centré lorsque vous branchez le pédalier TFRP sur le

joystick. Ne posez pas les pieds sur le palonnier.

- Les 3 axes des pédales se calibrent automatiquement après quelques mouvements et une

fois que les butées physiques de l’axe du palonnier et des 2 axes de freins différentiels sont

atteintes.

CROIX MULTIDIRECTIONNELLE POINT DE VUE

Votre joystick est doté d’une croix multidirectionnelle Point de Vue (11) qui, comme son

nom l’indique, vous permettra (dans les jeux le permettant) de surveiller instantanément

tout ce qui se passe autour de votre avion. Il vous suffit pour cela, depuis le menu de

configuration de votre jeu, de programmer les différentes vues (vue arrière, vue sur la

gauche, vue sur la

droite,

mais

aussi vues externes) sur les directions de la croix

multidirectionnelle Point de vue.

Vous pouvez bien entendu réserver la croix multidirectionnelle Point de vue à d’autres

utilisations (tir, etc.).

5/12

XBOX SERIES X|S / XBOX ONE

INSTALLATION SUR XBOX SERIES X|S / XBOX ONE

1. Positionnez le sélecteur (12) sur Xbox avant de brancher le câble USB.

2. Branchez le connecteur USB (2) sur un port USB de la console.

3. Allumez votre console.

4. La led du joystick s’allume en blanc.

5. Lancez un jeu compatible (supportant le mode Flight Stick)

Vous êtes maintenant prêt à jouer !

LISTE DES JEUX XBOX SERIES X|S / XBOX ONE COMPATIBLES

Sur Xbox Series X|S / Xbox One, le T.Flight Hotas One :

- n’est compatible qu’avec les jeux supportant le mode Flight Stick.

- est reconnu dans les jeux comme un véritable Joystick (et non comme une manette). Ceci

pour une réactivité et une précision maximale ainsi que pour l’accès aux options joystick

disponibles dans ces jeux.

Liste des jeux Xbox Series X|S / Xbox One compatibles avec le joystick disponible sur

https://support.thrustmaster.com dans la rubrique Joysticks / T.Flight Hotas One.

Cette liste s’étoffera régulièrement avec l’arrivée des nouveaux jeux Xbox Series X|S / Xbox

One compatibles avec le T.Flight Hotas One.

6/12

PC

INSTALLATION SUR PC

1. Positionnez le sélecteur (12) sur PC avant de brancher le câble USB.

2. Allez sur https://support.thrustmaster.com/. Cliquez sur Joysticks / T.Flight Hotas

One, puis sélectionnez Pilotes. Téléchargez et installez le pilote PC et son interface

personnalisée du Control Panel Windows.

3. Une fois le pilote PC installé, branchez le connecteur USB (2) sur l’un des ports de votre

PC.

4. Pour accéder au Control Panel, sélectionnez :

- Démarrer / Applications / Thrustmaster / Control Panel ou Panneau de configuration

(sous Windows® 10 / 8.1 / 8)

- Démarrer / Tous les programmes / Thrustmaster / Control Panel ou Panneau de

configuration (sous Windows® 7)

La boîte de dialogue Contrôleurs de jeu s’affiche.

Le périphérique apparaît à l’écran sous le nom T.Flight Hotas One et l’état OK.

7/12

5. Dans la boîte de dialogue Contrôleurs de jeu, cliquez sur Propriétés pour tester et

visualiser l’ensemble des fonctions.

Vous êtes maintenant prêt à jouer !

La page charge ...

Thrustmaster T.Flight Hotas One Manuel utilisateur

Ce manuel convient également à

Thrustmaster T.Flight Hotas One Manuel utilisateur

dans d''autres langues

Documents connexes