Miller Coolmate 1.3 Le manuel du propriétaire

Marque: Miller

Modèle: Coolmate 1.3

Catégorie: Système de soudage

Taper: Le manuel du propriétaire

Ce manuel convient également à

MH110343L

Coolmatet1.3

Processes

Description

TIG (GTAW) Welding

OM-257811B 2017−02

File: TIG (GTAW)

MIG (GMAW) Welding

For product information,

Owner’s Manual translations,

and more, visit

www.MillerWelds.com

Miller Electric manufactures a full line

of welders and welding related equipment.

For information on other quality Miller

products, contact your local Miller distributor to receive the latest full

line catalog or individual specification sheets. To locate your nearest

distributor or service agency call 1-800-4-A-Miller, or visit us at

www.MillerWelds.com on the web.

Thank you and congratulations on choosing Miller. Now you can get

the job done and get it done right. We know you don’t have time to do

it any other way.

That’s why when Niels Miller first started building arc welders in 1929,

he made sure his products offered long-lasting value and superior

quality. Like you, his customers couldn’t afford anything less. Miller

products had to be more than the best they could be. They had to be the

best you could buy.

Today, the people that build and sell Miller products continue the

tradition. They’re just as committed to providing equipment and service

that meets the high standards of quality and value established in 1929.

This Owner’s Manual is designed to help you get the most out of your

Miller products. Please take time to read the Safety precautions. They

will help you protect yourself against potential hazards on the worksite.

We’ve made installation and operation quick

and easy. With Miller you can count on years

of reliable service with proper maintenance.

And if for some reason the unit needs repair,

there’s a Troubleshooting section that will

help you figure out what the problem is. The

parts list will then help you to decide the

exact part you may need to fix the problem.

Warranty and service information for your

particular model are also provided.

Miller is the first welding

equipment manufacturer in

the U.S.A. to be registered to

the ISO 9001 Quality System

Standard.

Working as hard as you do

− every power source from

Miller is backed by the most

hassle-free warranty in the

business.

From Miller to You

Mil_Thank 2009−09

TABLE OF CONTENTS

SECTION 1 − SAFETY PRECAUTIONS - READ BEFORE USING 1.................................

1-1. Symbol Usage 1.......................................................................

1-2. Cooling Equipment Hazards 1............................................................

1-3. Additional Symbols For Installation, Operation, And Maintenance 1.............................

1-4. California Proposition 65 Warnings 2......................................................

1-5. Principal Safety Standards 2.............................................................

SECTION 2 − CONSIGNES DE SÉCURITÉ − LIRE AVANT UTILISATION 3...........................

2-1. Symboles utilisés 3.....................................................................

2-2. Dangers liés aux équipements de refroidissement 3.........................................

2-3. Dangers supplémentaires en relation avec l’installation, le fonctionnement et la maintenance 3.....

2-4. Proposition californienne 65 Avertissements 4..............................................

2-5. Principales normes de sécurité 4.........................................................

SECTION 3 − DEFINITIONS 5..................................................................

3-1. Additional Safety Symbols And Definitions 5................................................

3-2. Miscellaneous Symbols And Definitions 6..................................................

SECTION 4 − SPECIFICATIONS 7..............................................................

4-1. Serial Number And Rating Label Location 7................................................

4-2. Specifications 7........................................................................

4-3. Coolant Specifications 7................................................................

4-4. Environmental Specifications 7...........................................................

4-5. Dimensions, Weights, And Mounting 8.....................................................

SECTION 5 − INSTALLATION 9................................................................

5-1. GTAW Connections 9...................................................................

5-2. GMAW Connections 10..................................................................

SECTION 6 − MAINTENANCE & TROUBLESHOOTING 11.........................................

6-1. Routine Maintenance 11.................................................................

6-2. Coolant Maintenance 11.................................................................

6-3. Troubleshooting 12......................................................................

SECTION 7 − ELECTRICAL DIAGRAM 12........................................................

7-1. Circuit Diagram For Cooler 12.............................................................

SECTION 8 − PARTS LIST 12...................................................................

8-1. Recommended Spare Parts 12............................................................

COMPLETE PARTS LIST − Available at www.MillerWelds.com

WARRANTY

OM-257811 Page 1

SECTION 1 − SAFETY PRECAUTIONS - READ BEFORE USING

coolers 2016-08

Protect yourself and others from injury — read, follow, and save these important safety precautions and operating instructions.

1-1. Symbol Usage

DANGER! − Indicates a hazardous situation which, if

not avoided, will result in death or serious injury. The

possible hazards are shown in the adjoining symbols

or explained in the text.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury. The possible

hazards are shown in the adjoining symbols or ex-

plained in the text.

NOTICE − Indicates statements not related to personal injury.

. Indicates special instructions.

This group of symbols means Warning! Watch Out! ELECTRIC

SHOCK, MOVING PARTS, and HOT PARTS hazards. Consult sym-

bols and related instructions below for necessary actions to avoid the

hazards.

1-2. Cooling Equipment Hazards

The symbols shown below are used throughout this manual

to call attention to and identify possible hazards. When you

see the symbol, watch out, and follow the related instructions

to avoid the hazard. The safety information given below is

only a summary of the more complete safety information

found in the Safety Standards listed in Section 1-5. Read and

follow all Safety Standards.

Only qualified persons should install, operate, maintain, and

repair this unit.

During operation, keep everybody, especially children, away.

HOT PARTS can burn.

D Do not touch hot parts bare handed.

D Allow cooling period before working on

equipment.

D To handle hot parts, use proper tools and/or wear heavy, insu-

lated welding gloves and clothing to prevent burns.

FLYING METAL or DIRT can injure eyes.

D Wear approved safety glasses with side

shields even under your welding helmet.

Touching live electrical parts can cause fatal shocks

or severe burns. The input power circuit and machine

internal circuits are also live when power is on.

Incorrectly installed or improperly grounded equip-

ment is a hazard.

ELECTRIC SHOCK can kill.

D Do not touch live electrical parts.

D Disconnect input power or stop engine before installing or

servicing this equipment. Lockout/tagout input power according to

OSHA 29 CFR 1910.147 (see Safety Standards).

D Properly install, ground, and operate this equipment according to

its Owner’s Manual and national, state, and local codes.

D Always verify the supply ground − check and be sure that input

power cord ground wire is properly connected to ground terminal in

disconnect box or that cord plug is connected to a properly

grounded receptacle outlet.

D Keep cords dry, free of oil and grease, and protected from hot metal

and sparks.

D Frequently inspect input power cord and ground conductor for

damage or bare wiring – replace immediately if damaged – bare

wiring can kill.

D Turn off all equipment when not in use.

D Use only well-maintained equipment. Repair or replace damaged

parts at once. Maintain unit according to manual.

D Keep all panels and covers securely in place.

1-3. Additional Symbols For Installation, Operation, And Maintenance

FALLING EQUIPMENT can injure.

D Use equipment of adequate capacity to lift and

support unit.

D If using lift forks to move unit, be sure forks are

long enough to extend beyond opposite side of

unit.

D Keep equipment (cables and cords) away from moving vehicles

when working from an aerial location.

D Follow the guidelines in the Applications Manual for the Revised

NIOSH Lifting Equation (Publication No. 94−110) when manu-

ally lifting heavy parts or equipment.

OVERUSE can cause OVERHEATING

D Allow cooling period; follow rated duty cycle.

D Do not block or filter airflow to unit.

READ INSTRUCTIONS.

D Read and follow all labels and the Owner’s

Manual carefully before installing, operating, or

servicing unit. Read the safety information at

the beginning of the manual and in each

section.

D Use only genuine replacement parts from the manufacturer.

D Perform installation, maintenance, and service according to the

Owner’s Manuals, industry standards, and national, state, and

local codes.

D Read and understand the Safety Data Sheets (SDSs) and the

manufacturer’s instructions for adhesives, coatings, cleaners,

consumables, coolants, degreasers, fluxes, and metals.

OM-257811 Page 2

STEAM AND HOT COOLANT can burn.

Hose may rupture if coolant overheats.

D Visually inspect condition of hoses before each

use. Do not use damaged hoses.

D Allow cooling period before working on equipment.

HIGH PRESSURE FLUIDS can injure or kill.

D Coolant can be under high pressure.

D Release pressure before working on cooler.

D If ANY fluid is injected into the skin or body seek medical help

immediately.

MOVING PARTS can injure.

D Keep away from moving parts such as fans.

D Keep all doors, panels, covers, and guards

closed and securely in place.

D Have only qualified persons remove doors, panels, covers, or

guards for maintenance and troubleshooting as necessary.

D Reinstall doors, panels, covers, or guards when maintenance is

finished and before reconnecting input power.

1-4. California Proposition 65 Warnings

Welding or cutting equipment produces fumes or gases

which contain chemicals known to the State of California to

cause birth defects and, in some cases, cancer. (California

Health & Safety Code Section 25249.5 et seq.)

This product contains or produces a chemical known to the

state of California to cause cancer or birth defects (or other

reproductive harm). (California Health & Safety Code Section

25249.5 et seq.)

This product contains chemicals, including lead, known to

the state of California to cause cancer, birth defects, or other

reproductive harm. Wash hands after use.

1-5. Principal Safety Standards

Safety in Welding, Cutting, and Allied Processes, ANSI Standard Z49.1,

is available as a free download from the American Welding Society at

http://www.aws.org or purchased from Global Engineering Documents

(phone: 1-877-413-5184, website: www.global.ihs.com).

Safe Practices for the Preparation of Containers and Piping for Welding

and Cutting, American Welding Society Standard AWS F4.1, from Glob-

al Engineering Documents (phone: 1-877-413-5184, website:

www.global.ihs.com).

Safe Practices for Welding and Cutting Containers that have Held Com-

bustibles, American Welding Society Standard AWS A6.0, from Global

Engineering Documents (phone: 1-877-413-5184,

website: www.global.ihs.com).

National Electrical Code, NFPA Standard 70, from National Fire Protec-

tion Association, Quincy, MA 02269 (phone: 1-800-344-3555, website:

www.nfpa.org and www. sparky.org).

Safe Handling of Compressed Gases in Cylinders, CGA Pamphlet P-1,

from Compressed Gas Association, 14501 George Carter Way, Suite

103, Chantilly, VA 20151 (phone: 703-788-2700, website:

www.cganet.com).

Safety in Welding, Cutting, and Allied Processes, CSA Standard

W117.2, from Canadian Standards Association, Standards Sales, 5060

Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5NS

(phone: 800-463-6727, website: www.csagroup.org).

Safe Practice For Occupational And Educational Eye And Face Protec-

tion, ANSI Standard Z87.1, from American National Standards Institute,

25 West 43rd Street, New York, NY 10036 (phone: 212-642-4900, web-

site: www.ansi.org).

Standard for Fire Prevention During Welding, Cutting, and Other Hot

Work, NFPA Standard 51B, from National Fire Protection Association,

Quincy, MA 02269 (phone: 1-800-344-3555, website: www.nfpa.org).

OSHA, Occupational Safety and Health Standards for General Indus-

try, Title 29, Code of Federal Regulations (CFR), Part 1910, Subpart Q,

and Part 1926, Subpart J, from U.S. Government Printing Office, Super-

intendent of Documents, P.O. Box 371954, Pittsburgh, PA 15250-7954

(phone: 1-866-512-1800) (there are 10 OSHA Regional Offices—

phone for Region 5, Chicago, is 312-353-2220, website:

www.osha.gov).

Applications Manual for the Revised NIOSH Lifting Equation, The Na-

tional Institute for Occupational Safety and Health (NIOSH), 1600

Clifton Rd, Atlanta, GA 30329-4027 (phone: 1-800-232-4636, website:

www.cdc.gov/NIOSH).

OM-257811 Page 3

SECTION 2 − CONSIGNES DE SÉCURITÉ − LIRE AVANT UTILISATION

Cooler 2016−08_fre

Pour écarter les risques de blessure pour vous−même et pour autrui — lire, appliquer et ranger en lieu sûr ces consignes relatives

aux précautions de sécurité et au mode opératoire.

2-1. Symboles utilisés

DANGER! − Indique une situation dangereuse qui si on

l’évite pas peut donner la mort ou des blessures graves.

Les dangers possibles sont montrés par les symboles

joints ou sont expliqués dans le texte.

Indique une situation dangereuse qui si on l’évite pas

peut donner la mort ou des blessures graves. Les

dangers possibles sont montrés par les symboles

joints ou sont expliqués dans le texte.

AVIS − Indique des déclarations pas en relation avec des blessures

personnelles.

. Indique des instructions spécifiques.

Ce groupe de symboles veut dire Avertissement! Attention! DANGER

DE CHOC ELECTRIQUE, PIECES EN MOUVEMENT, et PIECES

CHAUDES. Consulter les symboles et les instructions ci-dessous y

afférant pour les actions nécessaires afin d’éviter le danger.

2-2. Dangers liés aux équipements de refroidissement

Les symboles représentés ci-dessous sont utilisés dans ce

manuel pour attirer l’attention et identifier les dangers possibles.

En présence de l’un de ces symboles, prendre garde et suivre

les instructions afférentes pour éviter tout risque. Les

instructions en matière de sécurité indiquées ci-dessous ne

constituent qu’un sommaire des instructions de sécurité plus

complètes fournies dans les normes de sécurité énumérées

dans la Section 2-5. Lire et observer toutes les normes de

sécurité.

Seul un personnel qualifié est autorisé à installer, faire

fonctionner, entretenir et réparer cet appareil.

Pendant le fonctionnement, maintenir à distance toutes les

personnes, notamment les enfants de l’appareil.

LES PIÈCES CHAUDES peuvent

provoquer des brûlures.

D Ne pas toucher à mains nues les partie

chaudes.

D Prévoir une période de refroidissement avant d

travailler à l’équipement.

D Ne pas toucher aux pièces chaudes, utiliser les outils recomman

dés et porter des gants de soudage et des vêtements épais pou

éviter les brûlures.

DES PIECES DE METAL ou DES

SALETES peuvent provoquer des

blessures dans les yeux.

D Porter des lunettes de sécurité avec écrans

latéraux ou un écran facial.

Le contact d’organes électriques sous tension peut

provoquer des accidents mortels ou des brûlures

graves. Le circuit d’alimentation et les circuits

internes de la machine sont également sous tension

lorsque l’alimentation est sur Marche. Un équipement installé ou mis

à la terre de manière incorrecte ou impropre constitue un danger.

UNE DÉCHARGE ÉLECTRIQUE peut

entraîner la mort.

D Ne pas toucher aux pièces électriques sous tension.

D Couper l’alimentation ou arrêter le moteur avant de procéder

à l’installation, à la réparation ou à l’entretien de l’appareil.

Déverrouiller l’alimentation selon la norme OSHA 29 CFR

1910.147 (voir normes de sécurité).

D Installez, mettez à la terre et utilisez correctement cet équipement

conformément à son Manuel d’Utilisation et aux réglementations

nationales, gouvernementales et locales.

D Toujours vérifier la terre du cordon d’alimentation. Vérifier et

s’assurer que le fil de terre du cordon d’alimentation est bien

raccordé à la borne de terre du sectionneur ou que la fiche du

cordon est raccordée à une prise correctement mise à la terre.

D Les câbles doivent être exempts d’humidité, d’huile et de graisse;

protégez−les contre les étincelles et les pièces métalliques

chaudes.

D Vérifier fréquemment le cordon d’alimentation afin de s’assurer

qu’il n’est pas altéré ou à nu, le remplacer immédiatement s’il l’est.

Un fil à nu peut entraîner la mort.

D L’équipement doit être hors tension lorsqu’il n’est pas utilisé.

D N’utiliser qu’un matériel en bon état. Réparer ou remplacer

sur-le-champ les pièces endommagées. Entretenir l’appareil

conformément à ce manuel.

D S’assurer que tous les panneaux et couvercles sont correctement

en place.

2-3. Dangers supplémentaires en relation avec l’installation, le fonctionnement et la maintenance

LA CHUTE DE L’ÉQUIPEMENT peut

provoquer des blessures.

D Utiliser un équipement de levage de capacité

suffisante pour lever l’appareil.

D En utilisant des fourches de levage pour

déplacer l’unité, s’assurer que les fourches

sont suffisamment longues pour dépasser du

côté opposé de l’appareil.

D Tenir l’équipement (câbles et cordons) à distance des véhicules

mobiles lors de toute opération en hauteur.

D Suivre les consignes du Manuel des applications pour l’équation

de levage NIOSH révisée (Publication Nº94–110) lors du levage

manuelle de pièces ou équipements lourds.

L’EMPLOI EXCESSIF peut

SURCHAUFFER L’ÉQUIPEMENT.

D Prévoir une période de refroidissement ;

respecter le cycle opératoire nominal.

D Ne pas obstruer les passages d’air du poste.

OM-257811 Page 4

LIRE LES INSTRUCTIONS.

D Lire et appliquer les instructions sur les

étiquettes et le Mode d’emploi avant

l’installation, l’utilisation ou l’entretien de

l’appareil. Lire les informations de sécurité au

début du manuel et dans chaque section.

D N’utiliser que les pièces de rechange recommandées par le

constructeur.

D Effectuer l’installation, l’entretien et toute intervention selon les

manuels d’utilisateurs, les normes nationales, provinciales et de

l’industrie, ainsi que les codes municipaux.

D Lire et comprendre les fiches de données de sécurité et les

instructions du fabricant concernant les adhésifs, les revêtements,

les nettoyants, les consommables, les produits de refroidissement,

les dégraisseurs, les flux et les métaux.

Les PIÈCES MOBILES peuvent

causer des blessures.

D S’abstenir de toucher des organes mobiles tels

que des ventilateurs.

D Maintenir fermés et verrouillés les portes,

panneaux, recouvrements et dispositifs de

protection.

D Lorsque cela est nécessaire pour des travaux d’entretien et de

dépannage, faire retirer les portes, panneaux, recouvrements

ou dispositifs de protection uniquement par du personnel

qualifié.

D Remettre les portes, panneaux, recouvrements ou dispositifs de

protection quand l’entretien est terminé et avant de rebrancher

l’alimentation électrique.

LA VAPEUR ET LE LIQUIDE DE

REFROIDISSEMENT CHAUD peuvent

provoquer des brûlures.

Un tuyau peut se rompre lorsque le liquide de

refroidissement surchauffe.

D Vérifiez visuellement l’état des tuyaux avant

chaque utilisation. N’utilisez pas de tuyaux

endommagés.

D Laissez refroidir avant d’intervenir sur l’équipement.

LES LIQUIDES SOUS HAUTE PRESSION

peuvent provoquer des blessures ou la

mort.

D Liquide de refroidissement sous haute

pression.

D Libérez la pression avant d’intervenir sur le

refroidisseur.

D En cas d’injection d’un liquide QUELCONQUE dans la peau ou

le corps, consultez immédiatement un médecin.

2-4. Proposition californienne 65 Avertissements

Les équipements de soudage et de coupage produisent des

fumées et des gaz qui contiennent des produits chimiques

dont l’État de Californie reconnaît qu’ils provoquent des

malformations congénitales et, dans certains cas, des

cancers. (Code de santé et de sécurité de Californie, chapitre

25249.5 et suivants)

Ce produit contient ou forme un produit chimique reconnu

par l’état de Californie de provoquer le cancer ou

malformations de naissance (ou autre problèmes

reproductifs. (Code de santé et de sécurité de Californie,

chapitre 25249.5 et suivants).

Ce produit contient des produits chimiques, notamment du

plomb, dont l’État de Californie reconnaît qu’ils provoquent

des cancers, des malformations congénitales ou d’autres

problèmes de procréation. Se laver les mains après

utilisation.

2-5. Principales normes de sécurité

Safety in Welding, Cutting, and Allied Processes, ANSI Standard Z49.1,

is available as a free download from the American Welding Society at

http://www.aws.org or purchased from Global Engineering Documents

(phone: 1-877-413-5184, website: www.global.ihs.com).

Safe Practices for the Preparation of Containers and Piping for Welding

and Cutting, American Welding Society Standard AWS F4.1, from

Global Engineering Documents (phone: 1-877-413-5184, website:

www.global.ihs.com).

Safe Practices for Welding and Cutting Containers that have Held

Combustibles, American Welding Society Standard AWS A6.0, from

Global Engineering Documents (phone: 1-877-413-5184,

website: www.global.ihs.com).

National Electrical Code, NFPA Standard 70, from National Fire

Protection Association, Quincy, MA 02269 (phone: 1-800-344-3555,

website: www.nfpa.org and www. sparky.org).

Safe Handling of Compressed Gases in Cylinders, CGA Pamphlet P-1,

from Compressed Gas Association, 14501 George Carter Way, Suite

103, Chantilly, VA 20151 (phone: 703-788-2700, website:

www.cganet.com).

Safety in Welding, Cutting, and Allied Processes, CSA Standard

W117.2, from Canadian Standards Association, Standards Sales, 5060

Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5NS

(phone: 800-463-6727, website: www.csagroup.org).

Safe Practice For Occupational And Educational Eye And Face

Protection, ANSI Standard Z87.1, from American National Standards

Institute, 25 West 43rd Street, New York, NY 10036 (phone:

212-642-4900, website: www.ansi.org).

Standard for Fire Prevention During Welding, Cutting, and Other Hot

Work, NFPA Standard 51B, from National Fire Protection Association,

Quincy, MA 02269 (phone: 1-800-344-3555, website: www.nfpa.org).

OSHA, Occupational Safety and Health Standards for General

Industry, Title 29, Code of Federal Regulations (CFR), Part 1910,

Subpart Q, and Part 1926, Subpart J, from U.S. Government Printing

Office, Superintendent of Documents, P.O. Box 371954, Pittsburgh, PA

15250-7954 (phone: 1-866-512-1800) (there are 10 OSHA Regional

Offices—phone for Region 5, Chicago, is 312-353-2220, website:

www.osha.gov).

Applications Manual for the Revised NIOSH Lifting Equation, The

National Institute for Occupational Safety and Health (NIOSH), 1600

Clifton Rd, Atlanta, GA 30329-4027 (phone: 1-800-232-4636, website:

www.cdc.gov/NIOSH).

. A complete Parts List is available at www.MillerWelds.com

OM-257811 Page 5

SECTION 3 − DEFINITIONS

3-1. Additional Safety Symbols And Definitions

. Some symbols are found only on CE products.

Warning! Watch Out! There are possible hazards as shown by the symbols.

Safe1 2012−05

Do not remove or paint over (cover) the label.

Safe20 2012−05

Disconnect input plug or power before working on machine.

Safe30 2012−05

Do not discard product (where applicable) with general waste.

Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection

facility.

Contact your local recycling office or your local distributor for further information.

Safe37 2012−05

XXXXX

Use coolant suggested by the manufacturer: 043810 (HF), 043809 (Al).

Safe52 2012−05

Safe50 2012−05

Plugged filter or hoses can cause overheating to the power source

and torch.

100 h. Std.

Safe51 2012−05

Every 100 hours, check and clean filter and check condition of hoses.

Read the labels on the welding power source, wire feeder, or other

major equipment for welding safety information.

Safe71 2012−06

Read the Owner’s Manual before working on this machine.

Safe70 2012−06

. A complete Parts List is available at www.MillerWelds.com

OM-257811 Page 6

3-2. Miscellaneous Symbols And Definitions

Amperes

Volts

Hertz

Water (Coolant)

Input

1max

Rated Maximum

Supply Current

Input Power

Line Connection

Degree Of

Protection

Power On Indica-

tor

Single-Phase

Alternating

Current

Water (Coolant)

Output

Primary Voltage

Cooling

Rated Cooling

Power

pmax

Rated Maximum

Pressure

Notes

. A complete Parts List is available at www.MillerWelds.com

OM-257811 Page 7

SECTION 4 − SPECIFICATIONS

4-1. Serial Number And Rating Label Location

The serial number and rating information for this product is located on the back panel. Use rating label to determine input power requirements and/or

rated output. For future reference, write serial number in space provided on cover of this manual.

4-2. Specifications

. The correction factor on the cooling power at an ambient temperature of 1045F (405C) is 0.625.

Recirculating Coolant System For Water-Cooled GTAW Torches And GMAW Guns

Use with power sources rated up to 280 amps.

Coolant Tank Capacity 1.3 gal (4.9 L)

Rated Cooling Power 1.33 kW at 1.06 qt/min at 77°F (4540 BTU/hr at 1 L/min at 25°C)

Maximum Cooling Power 3.4 kW at 3.8 qt/min at 77°F (11,600 BTU/hr at 3.6 L/min at 25°C)

Input Voltage 115 VAC, Single Phase, 60 Hz

Input Amperage 5.9 Amperes

4-3. Coolant Specifications

Do not use conductive coolant.

Application Coolant

GTAW Or Where High Frequency Current Is Used Low Conductivity Coolant 043810*

Distilled Or Deionized Water Okay Above 32°F (0°C)

GMAW Or Where High Frequency Current Is Not Used Low Conductivity Coolant 043810*

Aluminum Protecting Coolant 043809*

Distilled Or Deionized Water Okay Above 32°F (0°C)

Where Coolant Contacts Aluminum Parts Aluminum Protecting Coolant 043809*

*Coolants 043810 and 043809 protect to -37°F (-38°C) and resist algae growth.

NOTICE − Use of any coolant other than those listed in the table voids the warranty on any parts that come in contact with the coolant (pump, radiator,

etc.).

4-4. Environmental Specifications

A. IP Rating

IP Rating

IP23

This equipment is designed for outdoor use. It may be stored, but is not intended to be used outside during precipitation unless sheltered.

IP23 2014−06

B. Temperature Specifications

Operating Temperature Range Storage/Transportation Temperature Range

14°F to 104°F (−10°C To 40°C)

−4 to 131°F (−20 to 55°C)

Temp1_016- 08

. A complete Parts List is available at www.MillerWelds.com

OM-257811 Page 8

4-5. Dimensions, Weights, And Mounting

805 506-A

Dimensions

A 11.25 in. (286 mm)

B 10.375 in. (264 mm)

C 24 in. (610 mm)

D 15.4375 in. (392 mm)

E 9.59 in. (244 mm)

5/16 in. Dia

4 Holes

Weight

43 lb (20 kg)

1 Mounting Bracket (Optional)

Used to mount cooler to a Dynasty/Maxstar 280. Mount as

shown using existing hardware. Purchase 2X Miller Part

Number 251127 through the Miller Parts Dept.

Notes

. A complete Parts List is available at www.MillerWelds.com

OM-257811 Page 9

SECTION 5 − INSTALLATION

5-1. GTAW Connections

805 500-A

Tools Needed:

11/16 in.

! Do not move or operate unit where

it could tip.

To prevent overheating, make sure cooling

unit is positioned so there is 12 in. (305

mm) of unrestricted airflow on sides of unit.

NOTICE − If welding power source has a

water valve, do not connect hoses to water

valve. Connect hoses as shown.

1 Coolant Out Hose

2 Coolant In Hose

Fittings have 5/8-18 left-hand threads.

Connect hoses with proper fittings as

shown. Some power sources may require

a TIG block.

3 Coolant Tank Cap

4 115 Volt AC Grounded Receptacle

A dedicated circuit capable of carrying 15

amperes and protected by fuses or circuit

breakers is recommended. Recom-

mended fuse or circuit breaker size is 15

amperes.

Operation:

Fill tank with proper coolant. Use table in

Section 4-3 to select proper coolant. Main-

tain coolant level at approximately 1 in. (25

mm) below top of filler neck. Connect

hoses as shown. Unit turns on when

plugged in.

. For correct water cooled torch ad-

apters, see the Coolmate Series Op-

tions And Accessories page.

. A complete Parts List is available at www.MillerWelds.com

OM-257811 Page 10

5-2. GMAW Connections

805 501-A

Tools Needed:

11/16 in.

! Do not move or operate unit where

it could tip.

To prevent overheating, make sure cooling

unit is positioned so there is 12 in. (305

mm) of unrestricted airflow on sides of unit.

NOTICE − If welding power source has a

water valve, do not connect hoses to water

valve. Connect hoses as shown.

1 Coolant Out Hose

2 Coolant In Hose

Fittings have 5/8-18 left-hand threads.

Connect hoses with proper fittings as

shown.

3 Coolant Tank Cap

4 115 Volt AC Grounded Receptacle

A dedicated circuit capable of carrying 15

amperes and protected by fuses or circuit

breakers is recommended. Recom-

mended fuse or circuit breaker size is 15

amperes.

Operation:

Fill tank with proper coolant. Use table in

Section 4-3 to select proper coolant. Main-

tain coolant level at approximately 1 in. (25

mm) below top of filler neck. Connect

hoses as shown. Unit turns on when

plugged in.

. A complete Parts List is available at www.MillerWelds.com

OM-257811 Page 11

SECTION 6 − MAINTENANCE & TROUBLESHOOTING

6-1. Routine Maintenance

! Disconnect power

before maintaining.

n = Check Z = Change ~ = Clean Δ = Repair l = Replace

* To be done by Factory Authorized Service Agent

Every

Months

~Coolant Filter, durning heavy

service, clean more frequently.

~ Blow out heat exchanger fins.

nCheck coolant level. Top off with

distilled or deionized water if necessary.

Every

Months

nlHoses

nl Labels

ZReplace coolant.

6-2. Coolant Maintenance

805 502-A

! Disconnect input power before maintain-

ing.

! Dispose of used coolant according to na-

tional, state, and local codes. Do not pour

down drain.

NOTICE − Do not run cooler without coolant in tank.

1 Coolant Filter

Unscrew housing to clean filter (see Section 6-1).

Assemble and install cleaned coolant filter.

Changing Coolant

Changing coolant: Drain coolant by removing cap

and tipping unit forward, or use suction pump. Fill

with clean water and run for 10 minutes. Drain and

refill with coolant (see section 4-3). Install cap.

NOTICE − If replacing hoses, use hoses compati-

ble with ethylene glycol, such as Buna-n, Neo-

prene, or Hypalon. Oxy-acetylene hoses are not

compatible with any product containing ethylene

glycol.

. A complete Parts List is available at www.MillerWelds.com

OM-257811 Page 12

6-3. Troubleshooting

Trouble Remedy

Coolant system does not work. Be sure input power cord is plugged into an energized receptacle.

Check line fuses or circuit breaker, and replace or reset if necessary.

Motor overheated. Unit starts running when motor has cooled.

Have Factory Authorized Service Agent check Power switch S1 and motor (Mot).

Decreased or no coolant flow.

Add coolant.

Check for clogged hoses or coolant filter. Clean filter or clean / replace hoses if necessary.

Disconnect pump and check for sheared coupling. Replace coupling if necessary.

SECTION 7 − ELECTRICAL DIAGRAM

7-1. Circuit Diagram For Cooler

228 525-C

SECTION 8 − PARTS LIST

8-1. Recommended Spare Parts

Description

Part

No.

Dia.

Mkgs.

Recommended Spare Parts

Quantity

239494 Screen, Filter 1................ .... ..................................................

Notes

TM-216 869 Page 14 Dynasty 350/700, Maxstar 350/700

Notes

Effective January 1, 2017

(Equipment with a serial number preface of MH or newer)

This limited warranty supersedes all previous Miller warranties and is exclusive with no other

guarantees or warranties expressed or implied.

LIMITED WARRANTY − Subject to the terms and conditions below,

Miller Electric Mfg. Co., Appleton, Wisconsin, warrants to its original

retail purchaser that new Miller equipment sold after the effective date of

this limited warranty is free of defects in material and workmanship at

the time it is shipped by Miller. THIS WARRANTY IS EXPRESSLY IN

LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING THE WARRANTIES OF MERCHANTABILITY AND

FITNESS.

Within the warranty periods listed below, Miller will repair or replace any

warranted parts or components that fail due to such defects in material

or workmanship. Miller must be notified in writing within thirty (30) days

of such defect or failure, at which time Miller will provide instructions on

the warranty claim procedures to be followed. If notification is submitted

as an online warranty claim, the claim must include a detailed

description of the fault and the troubleshooting steps taken to identify

failed components and the cause of their failure.

Miller shall honor warranty claims on warranted equipment listed below

in the event of such a failure within the warranty time periods. All

warranty time periods start on the delivery date of the equipment to the

original end-user purchaser, and not to exceed twelve months after the

equipment is shipped to a North American distributor or eighteen

months after the equipment is shipped to an International distributor.

1. 5 Years Parts — 3 Years Labor

* Original Main Power Rectifiers Only to Include SCRs,

Diodes, and Discrete Rectifier Modules

2. 3 Years — Parts and Labor

* Auto-Darkening Helmet Lenses (Except Classic

Series) (No Labor)

* Engine Driven Welder/Generators

(NOTE: Engines are Warranted Separately by the

Engine Manufacturer.)

* Inverter Power Sources (Unless Otherwise Stated)

* Plasma Arc Cutting Power Sources

* Process Controllers

* Semi-Automatic and Automatic Wire Feeders

* Transformer/Rectifier Power Sources

3. 2 Years — Parts and Labor

* Auto-Darkening Helmet Lenses − Classic Series Only

(No Labor)

* Fume Extractors − Capture 5, Filtair 400 and Industrial

Collector Series

4. 1 Year — Parts and Labor Unless Specified

* AugmentedArc and LiveArc Welding Systems

* Automatic Motion Devices

* Bernard BTB Air-Cooled MIG Guns (No Labor)

* CoolBelt and CoolBand Blower Unit (No Labor)

* Desiccant Air Dryer System

* External Monitoring Equipment and Sensors

* Field Options

(NOTE: Field options are covered for the remaining

warranty period of the product they are installed in,

or for a minimum of one year — whichever is

greater.)

* RFCS Foot Controls (Except RFCS-RJ45)

* Fume Extractors − Filtair 130, MWX and SWX Series

* HF Units

* ICE/XT Plasma Cutting Torches (No Labor)

* Induction Heating Power Sources, Coolers

(NOTE: Digital Recorders are Warranted

Separately by the Manufacturer.)

* Load Banks

* Motor-Driven Guns (except Spoolmate Spoolguns)

* PAPR Blower Unit (No Labor)

* Positioners and Controllers

* Racks

* Running Gear/Trailers

* Spot Welders

* Subarc Wire Drive Assemblies

* TIG Torches (No Labor)

* Tregaskiss Guns (No Labor)

* Water Cooling Systems

* Wireless Remote Foot/Hand Controls and Receivers

* Work Stations/Weld Tables (No Labor)

5. 6 Months — Parts

* Batteries

6. 90 Days — Parts

* Accessory (Kits)

* Canvas Covers

* Induction Heating Coils and Blankets, Cables, and

Non-Electronic Controls

* M-Guns

* MIG Guns, Subarc (SAW) Torches, and External

Cladding Heads

* Remote Controls and RFCS-RJ45

* Replacement Parts (No labor)

* Spoolmate Spoolguns

Miller’s True Blue® Limited Warranty shall not apply to:

1. Consumable components; such as contact tips,

cutting nozzles, contactors, brushes, relays, work

station table tops and welding curtains, or parts that

fail due to normal wear. (Exception: brushes and

relays are covered on all engine-driven products.)

2. Items furnished by Miller, but manufactured by others,

such as engines or trade accessories. These items are

covered by the manufacturer’s warranty, if any.

3. Equipment that has been modified by any party other than

Miller, or equipment that has been improperly installed,

improperly operated or misused based upon industry

standards, or equipment which has not had reasonable

and necessary maintenance, or equipment which has

been used for operation outside of the specifications for

the equipment.

MILLER PRODUCTS ARE INTENDED FOR PURCHASE AND

USE BY COMMERCIAL/INDUSTRIAL USERS AND PERSONS

TRAINED AND EXPERIENCED IN THE USE AND

MAINTENANCE OF WELDING EQUIPMENT.

In the event of a warranty claim covered by this warranty, the

exclusive remedies shall be, at Miller’s option: (1) repair; or (2)

replacement; or, where authorized in writing by Miller in appropriate

cases, (3) the reasonable cost of repair or replacement at an

authorized Miller service station; or (4) payment of or credit for the

purchase price (less reasonable depreciation based upon actual

use) upon return of the goods at customer’s risk and expense.

Miller’s option of repair or replacement will be F.O.B., Factory at

Appleton, Wisconsin, or F.O.B. at a Miller authorized service facility

as determined by Miller. Therefore no compensation or

reimbursement for transportation costs of any kind will be allowed.

TO THE EXTENT PERMITTED BY LAW, THE REMEDIES

PROVIDED HEREIN ARE THE SOLE AND EXCLUSIVE

REMEDIES. IN NO EVENT SHALL MILLER BE LIABLE FOR

DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR

CONSEQUENTIAL DAMAGES (INCLUDING LOSS OF PROFIT),

WHETHER BASED ON CONTRACT, TORT OR ANY OTHER

LEGAL THEORY.

ANY EXPRESS WARRANTY NOT PROVIDED HEREIN AND ANY

IMPLIED WARRANTY, GUARANTY OR REPRESENTATION AS

TO PERFORMANCE, AND ANY REMEDY FOR BREACH OF

CONTRACT TORT OR ANY OTHER LEGAL THEORY WHICH,

BUT FOR THIS PROVISION, MIGHT ARISE BY IMPLICATION,

OPERATION OF LAW, CUSTOM OF TRADE OR COURSE OF

DEALING, INCLUDING ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR PARTICULAR

PURPOSE, WITH RESPECT TO ANY AND ALL EQUIPMENT

FURNISHED BY MILLER IS EXCLUDED AND DISCLAIMED BY

MILLER.

Some states in the U.S.A. do not allow limitations of how long an

implied warranty lasts, or the exclusion of incidental, indirect,

special or consequential damages, so the above limitation or

exclusion may not apply to you. This warranty provides specific

legal rights, and other rights may be available, but may vary from

state to state.

In Canada, legislation in some provinces provides for certain

additional warranties or remedies other than as stated herein, and

to the extent that they may not be waived, the limitations and

exclusions set out above may not apply. This Limited Warranty

provides specific legal rights, and other rights may be available, but

may vary from province to province.

Warranty Questions?

Call

1-800-4-A-MILLER

for your local

Miller distributor.

miller_warr 2017-01

Your distributor also gives

you ...

Service

You always get the fast,

reliable response you

need. Most replacement

parts can be in your

hands in 24 hours.

Support

Need fast answers to the

tough welding questions?

Contact your distributor.

The expertise of the

distributor and Miller is

there to help you, every

step of the way.

Miller Electric Mfg. Co.

An Illinois Tool Works Company

1635 West Spencer Street

Appleton, WI 54914 USA

International Headquarters−USA

USA Phone: 920-735-4505 Auto-Attended

USA & Canada FAX: 920-735-4134

International FAX: 920-735-4125

For International Locations Visit

www.MillerWelds.com

Model Name Serial/Style Number

Purchase Date (Date which equipment was delivered to original customer.)

Distributor

Address

City

State Zip

Please complete and retain with your personal records.

Always provide Model Name and Serial/Style Number.

Contact a DISTRIBUTOR or SERVICE AGENCY near you.

Welding Supplies and Consumables

Options and Accessories

Personal Safety Equipment

Service and Repair

Replacement Parts

Training (Schools, Videos, Books)

Technical Manuals (Servicing Information

and Parts)

Circuit Diagrams

Welding Process Handbooks

Contact the Delivering Carrier to:

For Service

Owner’s Record

File a claim for loss or damage during

shipment.

For assistance in filing or settling claims, contact

your distributor and/or equipment manufacturer’s

Transportation Department.

Contact your Distributor for:

To locate a Distributor or Service Agency visit

www.millerwelds.com or call 1-800-4-A-Miller

Miller Coolmate 1.3 Le manuel du propriétaire

Marque: Miller

Modèle: Coolmate 1.3

Catégorie: Système de soudage

Taper: Le manuel du propriétaire

Ce manuel convient également à

MH110343L

Télécharger le PDF

rapport

dans d''autres langues

English: Miller Coolmate 1.3 Owner's manual

Miller Coolmate 1.3 Le manuel du propriétaire

Ce manuel convient également à

Miller Coolmate 1.3 Le manuel du propriétaire

dans d''autres langues

Documents connexes