iHome iCVBT22W Mode d'emploi

Taper
Mode d'emploi
REFLECT
iHome Beauty
iCVBT22W.EXv23
Quick Start Guide
PMS Cool Gray 9C PMS uncoated 2705 U
iCVBT22W.EXv23 Vanity Mirror - Quick Start Guide (English)
Size: 153 x 140 mm (folded)
Color: 3C + 2C (PMS Cool Gray 9C & PMS 2705U, Cyan)
Material: 120 gsm wood free paper
Date: Mar 14, 2023
!
Connecting Mirror to Power
• Connect included AC adapter to DC jack on back of mirror
and the other end to a working wall outlet
USB
outlet
DC 9V 2A
Light Function
• Press light button to turn ON Hi/Lo/OFF
for the best light brightness
You look
Amazing!
Audio Function
• Press power button to turn speaker On or O
When mirror is On, press and hold for pairing
mode, indicated by the blinking BLUE LED
Select “iHome REFLECT” on your device’s
Bluetooth menu to connect
Press to play / pause Bluetooth audio
Press to answer Bluetooth calls
Press and hold for 2 seconds to decline/end Bluetooth calls
Quick double press for next track
Quick triple press for previous track
Press and hold for 2 seconds and wait for beep to activate
voice control with Siri®
/
Google Assistant™
Voice control requires an active internet connection on connected Bluetooth
device with iOS 10 and Android 4.1 and later. When activated, the speaker
microphone acts as an extension of the microphone in your smartphone to
make/take calls, enable you to ask Siri®/Google Assistant™ to play music and
more.
Press to lower or raise volume
Charging Devices
!
USB
DC 5V 1A
Mirror MUST be connected to AC adapter to
enable USB charging from the unit.
• Connect USB cable (not included) to USB charging port on
back of mirror and connect the other end to your device.
Detail Mirror
Attach included 10x magnifying detail mirror
wherever you like on the mirror face (or anywhere!)
The back of the detail mirror has SimpleStick™
micro suction material for easily attaching and
detaching almost anywhere. If necessary, clean
SimpleStick material with oce tape.
Maintenance
This mirror comes with a cleaning cloth to keep the large surface
and detail mirror smudge free.
Wash the mirrors with mild soap and water when needed.
IMPORTANT SAFETY INSTRUCTIONS
Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference.
1. Do not use this product near water.
2. Unplug unit and clean only with damp cloth. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the
surface of the unit.
3. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
4. Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including
amplifiers) that produce heat.
5. Only use attachments/accessories specified by the manufacturer.
6. Unplug this product during lightning storms or when unused for long periods of time.
7. Damage Requiring Service – This product should be serviced by qualified service personnel when:
- Plug has been damaged.
- Objects have fallen into or liquid has been spilled into the enclosure.
- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.
- The unit exhibits a marked change in performance or does not operate normally.
8. No naked flame sources, such as lighted candles, should be placed on this product.
9. This product is suitable for use in tropical and/or moderate climates.
WARNING:
- To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
- The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable.
- Sunlight: Never place the mirror in or expose the mirror to direct sunlight. The sun’s rays can reflect to become focused and cause
excessive heat and/or fire. Do not use mirror in direct sunlight as reflected sunlight could injure eyes
FCC INFORMATION
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
ISED Information
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et
Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
L'appareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur
l'exposition aux RF et la conformité.
Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.
Tout changement ou modification non expressément approuvé par la partie responsable de la conformité peut annuler l'autorité de
l'utilisateur à utiliser l'équipement.
CAN ICES-3(B) / NMB-3(B)
For warranty and full instructions
visit: www.ihome.com/support
© 2023 SDI Technologies, Inc. All rights reserved.
Questions? Visit www.ihome.com
Siri is a trademark of Apple, Inc. in the United States and other countries.
Google Assistant is a trademark of Google, Inc.
Printed in China
iCVBT22-031423-D
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

iHome iCVBT22W Mode d'emploi

Taper
Mode d'emploi

dans d''autres langues